520 First Start Up

I have a brand new Lumia 520 and I've had it on charge for a while now, the screen doesn't have a battery icon on it or anything like that, it just has the word Nokia. 
I'm stuck as to what to do with it now, please help

have you tried a soft reset (pressing the volume down and power buttons together until the phone vibrates). if that doesn't work, then try a hard reset using any of the methods detailed here on these boards.

Similar Messages

  • Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found". This error message is seen when first starting Windows Vista, prior to starting Photoshop Elements 12.

    Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
    This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1 
    It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • New Tab Homepage is different from the Homepage when first starting Firefox.

    My homepage is set for "Google search engine" (or)"http://www.google.com/" . Whenever I first start Firefox, the page displayed is the "http://www.google.com/". Whenever I hit the "Open A New Tab" button that is a "+" (plus) sign, the page displayed is always the "Yahoo" search engine (or "search.yahoo./" (after the slash, there is a lot of numbers and letters)).

    A new tab opens by default as a blank tab (about:blank).
    If that isn't the case then an extension has changed that behavior.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Safari 6.0.5 beachballing at first start on lion

    After updating to OS X 10.7.5, Safari started beachballing at every first start after login . I have repaired permissions,but it keeps happening.
    Are any others experiencing this issue? Iam on a white MacBook2,1, if it helps.

    Hey Cristian .b,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand your MacBook is becoming unresponsive when starting Safari. The following article provides some troubleshooting steps that may help:
    OS X Lion: If your Mac runs slowly
    http://support.apple.com/kb/PH3915
    If you continue to have issues, you may want to isolate further by starting up in safe mode:
    OS X Lion: Start up in safe mode
    http://support.apple.com/kb/PH4373
    Thanks,
    Matt M.

  • HT1688 I have an Iphone 3gs. When I go to Settings, then General, then Cellular, only Cellular Data and Enable 3G appear. There is no "Roaming"option to turn on or off. When I first started using the phone there was and I turned it off. What can I do?

    I have an I phone 3gs. When I go to Settings, then General, then Cellular, only Cellular Data and Enable 3G appear. There is no Roaming"" option to turn on or off. When I first started using the phone it was there, and  I turned it off. Why is it no longer there? What can I do to get it back? I am being charged roaming charges!!

    My iphone 4s has the Cellular Data and Data Roaming but does NOT have the option of ROAMING Voice&Data.  Do you know how to enable it?

  • Lightroom 2.4 on XP crashes on first start up

    I have the trial version on an XP machine with a 3.4 ghz processor, 1 GB of ram, a GeForce 6600 (512mb) graphics card. Ever since I downloaded the program it freezes all the time. Initially it would freeze on startup and crash my start bar soon after as well. After I installed Photoshop CS3 it now runs until I try to do anything major and again crashes the start bar. AFTER all that if I can get the program started again it runs just fine. Its not maxing out the ram or anything and CS3 runs beautifully without any issues. It will do this on every first start up of the program. If I restart and try again it freezes again like clockwork.
    Any recommendations? Should I uninstall and reload or is it system related?

    I see. I'll give it a shot and see what happens. The answer does make sense in a way, but I have a feeling its more than a lack of RAM and/or updated drivers...but that's just cuz I'm a pessimist. Thanks for the suggestion.
    EDIT-
    After removing a few unused programs from startup and freeing some ram it seems lightroom won't lockup anymore. Interestingly enough it does not come near maxing out my ram. I can run LR and CS3 at the same time and only under intense usage of photoshop can I come close to maxing out the ram but both programs still run. Even before the modifications LR wasn't maxing out on ram hence my skeptiscism. So, I can only stipulate you were right. Thanks again for the help. Hopefully *knocks on wood* this problem has been solved.

  • HT200197 When first starting Apple TV for the first time it went straight to the screen with the choices and they were all in French.  I have been unable to get to the setup screen no matter what I do.  I have tried restarting from scratch several times.

    No setup screen when first starting apple TV

    Hey Docbarb2,
    You should be able to change the language by either restoring your Apple TV with iTunes or change the language by following the steps in the second article. Take a look at the article below for more information to either get you back to square one or to at least a language that you know.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    https://support.apple.com/en-us/HT202118
    Change the language on your Apple TV
    https://support.apple.com/en-us/HT202799
    Take care,
    -Norm G. 

  • Finder freezes on first start, But ok on restart

    Whenever I first start up my Mac Pro, it can load all the way up to the desktop background, but the dock and bar on the top along with Macintosh HD don't load and the spinning cursor appear. However, if i restart the computer after that, everything loads fine.
    I don't know what's causing this. Please help me.
    Thanks
    -Nick

    My first thought is the backup battery is dead or near dead. When you first boot up, it may be that because of the low battery your settings are corrupt and it freezes. On the second boot up, now that the system is all charged up and there is power to the PMU/PRAM (or whatever they call it now), that it has enough to properly reset or overcome bad PMU settings and restart properly.
    If your iMac is over a year old and you have never changed that battery, now would be a good time to check that. One thing you can try is simply removing the battery completely. The PMU will reset every time the computer is powered down, but if the computer now starts reliably every time, then that was your problem.
    Another possible troubleshooting cause...
    Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller
    http://support.apple.com/kb/HT1543
    Patrick

  • Firefox is extremely slow on first start up

    http://www.youtube.com/watch?v=NYw4oHHGqJA
    That is literally how it looks in realtime when I first start firefox. No such problem in Chrome.
    So when I choose first link from bookmarks or fast dial, it takes minutes to load it and in the meantime firefox is stuck like it froze, while my HDD continuously works and works and works...

    Your security may be monitoring the Firefox startup too closely.
    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • When I first start my Safari and other browsers won't load

    I recently upgraded to a MacBook Air from my 6 year old MacBook pro.  I moved everything using a TimeMachine backup.  I have been having a problem that when I start the day or return to the computer after having been off it a while, my airport will connect but my Safari will not go to the webpages, it just hangs.  Sometimes this will last until all my mail downloads and then it will work, but this morning and a few other times  I could not get Safari or Firefox to download from the web, even after my mail downloaded, until I restarted the computer, then it they worked fine.  It is like something is hanging up my ability to get pages to download from the web when I first start trying to connect.
    Thanks for any help with this,
    KC

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • When I first started using Collections, I followed someone's advice and always clicked 'create virtu

    When I first started using Collections, I followed someone's advice and always clicked 'create virtual copy' -- so I now have a huge number of unused/useless VCs that I would like to clear out. Is there any way to 1) filter to show all virtual copies that have not been changed (but keep the ones that I have edited or changed in any way, 2) delete the unchanged virtual copies but keep the collection that holds them intact? I can picture a work-around for the second part by color coding all the unused VCs along with their original, deleting the unedited VCs, going to the folder and selecting all the colored originals, dragging them to the colection and then removing the color lable. Cumbersome, but doable.

    Umm no not that i remember. It just randomly started happening. I reformatted the hard drive for mac (journaled) but it was working fine since i did it until now

  • CS4 ReInstall - At reinstall, CS4 accepts my License #.  At first start up, it states its wrong.

    At the point of re-installing my CS4, the system CONFIRMS and ACEEPTS my License # that came with my cd's.  The install was done WITH admin rights.
    At first start up after install, it states my License # is wrong.
    Why?

    Try this:
    Uninstall CS4 completely.
    Set your system date back to a date just after November 1, 2008.
    Reinstall and launch it.
    If it works, reset your date back to today.
    If not, you'll probably need to contact customer service: https://helpx.adobe.com/x-productkb/global/find-serial-number.html or 1 (800) 833-6687

  • Settings on first start-up?

    How do I access the settings that came up when I first started my VADO and what do those settings mean?
    I could not find that info in the little manual that came with it.

    Hi,
    Press and hold the toggle button for photos and videos mode while the unit is switched on will activate the menu settings. There are 2 pages for the menu. Press either forward and rewind touch pad to access the pages. Select OK to exit the menu.
    These are the meaning for those settings:
    . When you select Video Quality , there are 3 options to select for the quality. HD+ being the highest quality while VGA is the lowest. Press the record button to confirm the option. Select OK to exit the menu.
    2. You can also set the recording display to full screen. Press the record button to confirm the option. Select OK to exit the menu.
    3. At the back of the Vado HD, there is a red light which can be activated to notify the other party that the unit is in recording process. Press the record button to confirm the option. Select OK to exit the menu. If you see this red light is blinking, it means that the Vado HD is charging the battery; usually via a computer?s USB port.
    4. When the Tone is activated, there is a sound tone to alert the user that Vado HD is switched on or power down. Press the record button to confirm the option. Select OK to exit the menu.
    5. You can set the date and time for Vado HD at the 2nd page of the menu settings. Press the record button to confirm the option. Select OK to exit the menu.
    6. When this is turned on, Instant Record enables Vado HD to standby for 30 minutes before it is shut down. If it is switched off, the unit will turn off after 3 minutes. Press the record button to confirm the option. Select OK to exit the menu.
    7. Anti-Flicker allows the Vado HD to suit the lighting conditions for best performance. Press the record button to confirm the option. Select OK to exit the menu.
    8. TV system enables the Vado HD to output to TV formats via earphone/AV Out/Mic-In connector via a separate composite RCA cable. NTSC system is meant for the Americas while Europeand Asia use PAL system. Press the record button to confirm the option. Select OK to exit the menu.
    9. Language provides the following languages for settings. Press the record button to confirm the option. Select OK to exit the menu.

  • HT4239 When I first started using my iPad 3,I thought Safari was just a regular homepage          offer by Apple. I replaced it with Google. This was about 3 months ago(due to illness) don't really remember exactly what I did.

    When I first started using my iPad 3,I thought Safari was just a suggested homepage offered by Apple. I replaced it with Google. This was about 3 months ago(due to illness) don't really remember exactly what I did. Could anyone help me restore Safari? Please,would so appreciate it. Mar.cia

    If you want Google as your homepage, open Safari.
    Type  www.google.com   in the address bar
    Then tap the action icon (box with a right facing arrow just to the left of the address bar).
    Then tap:  Add to Home Screen
    That you can access your homepage directly from your Home screen.

  • Mac Pro 2008 always crash after sleep and after first start

    Hello, new in the forum,
    2 years ago, I replaced the main disk of a Mac Pro 2008 for a SSD Samsung 470 256 Go.
    Until then, it always crashed 1 or 5 minutes after sleep mode (which I didn't used much), and not always 10 to 15 minutes after the first start of the day.
    No matter if I was working on it or not… Suitcase installed or not (no font problem here). Rest of the day was fine (if no sleep !).
    The difference of speed was so big and "good" that I dealed with it. I though that the Mac Pro was a little old for the SSD technology, and that Apple would fix it, with chance…
    2 weeks ago, I installed Maverick :
    I got crashs during the work flow too. I needed to re-start 3 times at least… Re-start without extension was ok (or not), re-start, crash, re-start without extension, restart ok. I used Onyx, did PRAM too. And sometimes, I needed to re-install Maverick or even to do a clean-install !
    So I suspected the Samsung 470 for all (sleep and work crashs) and replaced it for a Samsung 840 Pro 512 Go.
    And the Mac Pro returned to Mountain Lion.
    Not really better : no crash one day (yeeeees!) and crash after the first start the next day (nooooo!). Every time I tested sleep mode, it crashed.
    My system :
    Mac Pro 3.1 - 2,8 GHz - Quad
    Mountain Lion, 10 Go ram DDR2, ATI Radeon HD 2600 XT, 30' cinema display.
    Adobe CS5 alone (minimal install) with Onyx to repair after each crash.
    Could it be the video card, the mother board, the age of the boy ?
    Thanks a lot !
    Christophe S

    Edit !
    I said that Finder and apps were blocked after 10 seconds (without extension).
    But it was to clic on Launchpad that blocked all, and 5 minutes later it works again.
    I did clic again on Launchpad, it blocked and 2 minutes later it appeared full screen but with rainbow circle, and quit.
    - Restarted with extensions. Kernel panic!
    - Restarted the mac and the grey screen with Apple blocked, without any mouse this time. 15 minutes later, still blocked.
    - Forced restart without extension. Here are the reports of Kernel Panic and EtreCheck:
    Kernel Panic Report:
    Interval Since Last Panic Report:  122463 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    52E60929-F5AE-D9CD-04B0-1872526C0821
    Mon Oct 13 10:58:17 2014
    panic(cpu 3 caller 0xffffff8007cb8945): Kernel trap at 0xffffff8007ef69e0, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x000000000000008a, CR3: 0x000000002f749000, CR4: 0x0000000000000660
    RAX: 0xffffff80209bb7e8, RBX: 0xffffff801fc6d808, RCX: 0x0000000009000000, RDX: 0xffffff801fc6dde0
    RSP: 0xffffff8131b7bbc0, RBP: 0xffffff8131b7bc00, RSI: 0x00000000000c43ff, RDI: 0xffffff801fc6dde0
    R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0xffffff80220fbfa4, R11: 0x0000000000000020
    R12: 0xffffff801fc6dde0, R13: 0x00000000000c43ff, R14: 0x00000000000c43ff, R15: 0x0000000000000002
    RFL: 0x0000000000010202, RIP: 0xffffff8007ef69e0, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x000000000000008a, Error code: 0x0000000000000000, Fault CPU: 0x3
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8131b7b860 : 0xffffff8007c1d636
    0xffffff8131b7b8d0 : 0xffffff8007cb8945
    0xffffff8131b7baa0 : 0xffffff8007ccebfd
    0xffffff8131b7bac0 : 0xffffff8007ef69e0
    0xffffff8131b7bc00 : 0xffffff8007eee0d6
    0xffffff8131b7be00 : 0xffffff8007d1a5d6
    0xffffff8131b7be60 : 0xffffff8007d092aa
    0xffffff8131b7bf50 : 0xffffff8007fe97ba
    0xffffff8131b7bfb0 : 0xffffff8007ccf453
    BSD process name corresponding to current thread: mdworker
    Mac OS version:
    12F45
    Kernel version:
    Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
    Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
    Kernel slide:     0x0000000007a00000
    Kernel text base: 0xffffff8007c00000
    System model name: MacPro3,1 (Mac-F42C88C8)
    System uptime in nanoseconds: 121192507210
    last loaded kext at 8889944220: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f899fe000, size 28672)
    loaded kexts:
    com.apple.driver.AudioAUUC 1.60
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AppleHDAHardwareConfigDriver 2.4.7fc4
    com.apple.driver.AppleTyMCEDriver 1.0.2d2
    com.apple.iokit.IOBluetoothSerialManager 4.1.7f4
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AppleHDA 2.4.7fc4
    com.apple.driver.AppleUpstreamUserClient 3.5.12
    com.apple.driver.AppleMCCSControl 1.1.11
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.kext.AMDFramebuffer 8.1.6
    com.apple.driver.AppleUSBDisplays 357
    com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.1.7f4
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.ATIRadeonX2000 8.1.6
    com.apple.driver.ApplePolicyControl 3.4.5
    com.apple.driver.AppleSMBusPCI 1.0.11d1
    com.apple.driver.AppleLPC 1.6.3
    com.apple.driver.AppleMCEDriver 1.1.9
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.driver.CSRHIDTransitionDriver 4.1.7f4
    com.apple.driver.PioneerSuperDrive 3.3.1
    com.apple.iokit.SCSITaskUserClient 3.5.6
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.3.5
    com.apple.driver.AppleUSBHub 635.4.0
    com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
    com.apple.driver.AppleFileSystemDriver 3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 34
    com.apple.driver.AppleFWOHCI 4.9.9
    com.apple.driver.AppleAHCIPort 2.6.6
    com.apple.driver.AppleIntelPIIXATA 2.5.1
    com.apple.driver.AppleUSBEHCI 621.4.6
    com.apple.driver.AppleUSBUHCI 621.4.0
    com.apple.driver.AppleACPIButtons 1.8
    com.apple.driver.AppleRTC 1.5
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 1.9
    com.apple.driver.AppleACPIEC 1.8
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
    com.apple.nke.applicationfirewall 4.0.39
    com.apple.security.quarantine 2.1
    com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSerialFamily 10.0.6
    com.apple.driver.DspFuncLib 2.4.7fc4
    com.apple.iokit.IOAudioFamily 1.9.2fc7
    com.apple.kext.OSvKernDSPLib 1.12
    com.apple.driver.AppleSMBusController 1.0.11d1
    com.apple.iokit.IOSurface 86.0.4
    com.apple.iokit.IOBluetoothFamily 4.1.7f4
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f4
    com.apple.iokit.IOFireWireIP 2.2.5
    com.apple.driver.AppleHDAController 2.4.7fc4
    com.apple.iokit.IOHDAFamily 2.4.7fc4
    com.apple.driver.AppleGraphicsControl 3.4.5
    com.apple.iokit.IONDRVSupport 2.3.7
    com.apple.kext.AMD2600Controller 8.1.6
    com.apple.kext.AMDSupport 8.1.6
    com.apple.iokit.IOGraphicsFamily 2.3.7
    com.apple.driver.AppleSMC 3.1.5d4
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.IOPlatformPluginFamily 5.4.1d13
    com.apple.driver.AppleUSBHIDMouse 175.8
    com.apple.driver.AppleHIDMouse 175.8
    com.apple.driver.AppleUSBHIDKeyboard 170.2.4
    com.apple.driver.AppleHIDKeyboard 170.2.4
    com.apple.iokit.IOUSBHIDDriver 623.4.0
    com.apple.driver.AppleUSBMergeNub 621.4.6
    com.apple.driver.AppleUSBComposite 621.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOATAPIProtocolTransport 3.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
    com.apple.iokit.IOUSBUserClient 630.4.4
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IOAHCIFamily 2.5.1
    com.apple.iokit.IONetworkingFamily 3.0
    com.apple.iokit.IOATAFamily 2.5.1
    com.apple.iokit.IOUSBFamily 635.4.0
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.iokit.IOHIDFamily 1.8.1
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 220.3
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.DiskImages 345
    com.apple.iokit.IOStorageFamily 1.8
    com.apple.driver.AppleKeyStore 28.21
    com.apple.driver.AppleACPIPlatform 1.8
    com.apple.iokit.IOPCIFamily 2.8
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
    Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
    Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
    Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
    Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
    Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
    Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
    Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
    Bluetooth: Version 4.1.7f4 12974, 3 service, 12 devices, 0 incoming serial ports
    PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
    Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
    Serial ATA Device: ST31000524AS, 1 TB
    Parallel ATA Device: PIONEER DVD-RW  DVR-112D
    USB Device: hub_device, apple_vendor_id, 0x9120, 0xfd500000 / 2
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd520000 / 4
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd521000 / 6
    USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd522000 / 5
    USB Device: Apple Cinema HD Display, apple_vendor_id, 0x9220, 0xfd530000 / 3
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
    FireWire Device: built-in_hub, 800mbit_speed
    FireWire Device: unknown_device, unknown_speed
    Report EtreCheck :
    Description du problème :
    Here is the report of EtreCheck after the Kerner Panic sent before.
    Christophe.s
    EtreCheck version : 2.0.2 (86)
    Rapport créé 13 octobre 2014 11:23:31 UTC+02:00
    Informations matérielles : ℹ️
      Mac Pro (début 2008)
      Mac Pro - modèle : MacPro3,1
      2 2.8 GHz Quad-Core Intel Xeon CPU : 8-core
      10 GB RAM Pas extensible
      DIMM Riser B/DIMM 1
      2 GB DDR2 FB-DIMM 800 MHz ok
      DIMM Riser B/DIMM 2
      2 GB DDR2 FB-DIMM 800 MHz ok
      DIMM Riser A/DIMM 1
      1 GB DDR2 FB-DIMM 800 MHz ok
      DIMM Riser A/DIMM 2
      1 GB DDR2 FB-DIMM 800 MHz ok
      DIMM Riser B/DIMM 3
      empty empty empty empty
      DIMM Riser B/DIMM 4
      empty empty empty empty
      DIMM Riser A/DIMM 3
      2 GB DDR2 FB-DIMM 800 MHz ok
      DIMM Riser A/DIMM 4
      2 GB DDR2 FB-DIMM 800 MHz ok
      Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
    Informations vidéos : ℹ️
      ATI Radeon HD 2600 - VRAM : 256 MB
      Cinema HD Display 2560 x 1600
    Logiciel du système : ℹ️
      OS X 10.8.5 (12F45) - Uptime: un jour 0:11:6
    Informations des disques : ℹ️
      Samsung SSD 840 PRO Series disk0 : (512,11 GB)
      Statut S.M.A.R.T. : Vérifié
      disk0s1 (disk0s1) <non monté>  : 210 Mo
      MacPro SSD (disk0s2) /  [Startup] : 511.25 Go (472.61 Go libre)
      Recovery HD (disk0s3) <non monté>  [Restauration] : 650 Mo
      ST31000524AS disk1 : (1 TB)
      Statut S.M.A.R.T. : Vérifié
      disk1s1 (disk1s1) <non monté>  : 210 Mo
      MacPro 1To (disk1s2) /Volumes/MacPro 1To  : 999.35 Go (633.08 Go libre)
      Recovery HD (disk1s3) <non monté>  [Restauration] : 650 Mo
    Informations USB : ℹ️
      Verbatim Portable USB Drive 320,07 GB
      Statut S.M.A.R.T. : Vérifié
      disk3s1 (disk3s1) <non monté>  : 210 Mo
      320 Go Christophe Syren (disk3s2) /Volumes/320 Go Christophe Syren  : 319.73 Go (313.64 Go libre)
      USB 2.0 USB Flash Drive 8,17 GB
      Statut S.M.A.R.T. : Vérifié
      SANS TITRE (disk2s1) <non monté>  : 8.17 Go
      Apple, Inc. Keyboard Hub
      Mitsumi Electric Apple Optical USB Mouse
      Apple, Inc Apple Keyboard
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper : ℹ️
      Mac App Store et développeurs identifiés
    Représentants de lancement : ℹ️
      [désengagé] com.adobe.AAM.Updater-1.0.plist Aide
      [désengagé] com.adobe.CS5ServiceManager.plist Aide
      [désengagé] com.extensis.FMCore.plist Aide
    Daemons de lancements : ℹ️
      [invalid?] com.adobe.SwitchBoard.plist Aide
    Représentants de lancement pour l’utilisateur : ℹ️
      [désengagé] com.adobe.AAM.Updater-1.0.plist Aide
      [désengagé] com.adobe.ARM.[...].plist Aide
    Éléments Ouverture : ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Application (/Applications/Dropbox.app)
    Plug-ins internet : ℹ️
      OfficeLiveBrowserPlugin : Version : 12.3.6 Aide
      AdobePDFViewer : Version : 9.5.5 Aide
      QuickTime Plugin : Version : 7.7.1
      JavaAppletPlugin : Version : 14.9.0 - SDK 10.7 Vérifier la version
    Panneaux de préférences de 3ème partie : ℹ️
      Growl  Aide
    Time Machine : ℹ️
      Skip System Files: NO
      Sauvegarde automatique : OUI
      Disques sauvegardés :
      MacPro SSD : Taille de disque : 511.25 Go Disque utilisé : 38.64 Go
      Destinations :
      Data [Network]
      Taille totale : 2 To
      Nombre de sauvegardes total : 9
      Sauvegardes la plus agée : 2014-10-08 01:39:21 +0000
      Dernière sauvegarde : 2014-10-10 11:31:35 +0000
      Taille de la disque de sauvegarde : Excellent
      Taille de sauvegarde 2 To > (Taille de disque 511.25 Go X 3)
    L’utilisation du CPU par processus : ℹ️
          1% WindowServer
          0% ps
          0% fontd
          0% System Events
          0% coreservicesd
    L’utilisation de la mémoire par processus : ℹ️
      97 Mo Dock
      97 Mo Finder
      75 Mo WindowServer
      64 Mo com.apple.security.pboxd
      64 Mo CalendarAgent
    Informations de la mémoire virtuelle : ℹ️
      523 Mo RAM Disponible
      1.04 Go RAM Active
      307 Mo RAM Inactive
      8.86 Go RAM Résidente
      266 Mo Pages entrants
      0 o Sorties pages

Maybe you are looking for

  • Ext HD speed and Bus-Powered Firewire 800

    After having gone through various External HD over the years, Firewire 800 (WD Studio with power adapter) is by far proving to be best in terms of connecting speed when handling my 350gb+ library. However, lately, I was exploring the option of having

  • Data Services / SAP / ABAP

    Hi, i would like to use a var for filter, in an ABAP component my var is a string, that i use for filter like this : KNUMV IN ($MYVAR) with myvar = '0001820242','0001820248','0001820250','0001820253','0001820254','0001820257','0001820258','0001820260

  • "Event" free sorting of photos - by me, not by the software?

    iPhoto insists on asserting that the date of everything is important and grouping things into "events." This is defeating, or at least creating a huge hassle for, what I am doing with most of the pictures. I am either grouping things into large album

  • Install external graphic card for Probook 4420s

    Dear All, Please advice me how to install external graphic card for my Proboob 4420s? I want to setup Dialux Evo 3.1, however the software required directX 10.0 graphic card. Please help me to solve this problem?

  • Problem after instilling iTunes 10

    After I intsalled iTunes10 I'll freeze up and won't close. Can anybody help me with this or is anybody else going throught the same thing?