5230 Does not warn about Security Cameras

I bought brand new 5230 a week ago. When suggested by the sms sent by Nokia I upgraded the firmware with PC Suite, downloaded the latest available Ovi Maps via phones Ovi application and downloaded Europe maps with PCSuite (Map Loader 3.something).
Versions are:
Ovi Maps is v 3.04 10wk17 b07 MW OpenGL LN MN
Maps are version  0.1.24.114
Location is Finland, software is finnish.
"Varoitus turvatarkkailusta"/'Warning for security surveillance' is selected on options. When tried, no warning of what so ever is presented, no sound or visual alert, nor nothing special could be seen on display when driven past cameras that has been there for years. The situation is the same when I tested using offline or onlive navigation.
Solved!
Go to Solution.

Hi NSince1991
Just repeated process on my 5230 by deleting 1.0.0.30.europe.cdt from "safetyspots" and dragging it onto PC desktop. Went into OVI Maps application switched on Safety spot warner and set to "Only visual" and found that it had downloaded "europe.zip.dnl", then dragged 1.0.0.30.europe.cdt back into "safetyspots" and voilå.
I usually have it set to "Offline" in OVI Maps but for this exercise I set it to "Online" with a network internet access point and "synchronized with OVI" once. Just for information 5230 v20.0.005 and OVI Maps v3.04 10wk17 b07.
Here is screenshot of a familiar address in Europe:http://i26.tinypic.com/2lnnvc.jpg
When safetyspot file is in place phone doesn't need to be online, just pick Drive > Map and safetycameras should be visible.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Can I stop Windows 7 from warning about security on every linked PDF?

    I am working on a project for which I have created one central document (an index) and 120 linked documents. Each document, on every page, has links to the next alphabetical document and back to the central index. This project will be distributed on disc to people with unknown computer platforms.
    I am a Mac user, and this works well on my iMac using Adobe Reader. It also works on my ancient Windows XP machine. A tech friend has looked the project over, and he says that on Windows 7 (used by more than half of computer users), every time a document links to a new document, Windows 7 throws up a warning about PDF security hazards. With a large number of documents to open, this could be tiresome.
    Is there a way to stop Windows 7 from warning about security on every linked PDF?
    This tech person recommends joining all the PDFs into one file (around 50 MB by his estimate), which would require relinking every current link.
    Acrobat offers to do the same with its Portfolio, but I'm not fond of the graphic styles offered, and I worry that one large file might be a challenge for older machines.
    Any suggestions?

    Can you get a screen shot of this error message or at least the exact wording? I suspect the error message is being displayed by Reader/Acrobat and not Windows.

  • Get an Error window, The source folder does not contain any supported camera raw files

    I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
    I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
    Esther

    Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

  • Does not warn before closing multiple tabs

    On version 12 and even now 13, even with "warn me before closing multiple tabs" checked, it does not warn me. I have read about issues with saving data to disk and private browsing. All I want is to be warned before X-ing out of a window with multiple tabs open

    Hi, my issue has nothing to do with saving tabs for the next time. If I have at least two tabs open, then click on the X to close the window, I do not want the window and tabs to close. I want a warning asking me, "do you want to close this window?"
    That feature is not working anymore. It just closes the window without prompting a warning, asking if that is what I really want to do.

  • Audio warning about security on computer.....

    I am getting frequent loud audio warning about security on my computer.  The message plays continuously until I turn it off.  it tells me to go to (I think this is it,but I threw the paper away with the exact address) but there is no web address like that.  Is it a hoax and can I block it if so?  Is it real and do I need to do something?  Call from NOTIFICATION® - URGENT ONLINE NOTICE, duration 01:45 is what shows on the log.
    Thank you, Tovarishtina

    please visit the thread below for instructions and suggestions on how to deal with such unwanted and suspicious activities;
    How to Handle Suspicious Calls, Messages and Contact Requests (Scam/Spam)
    CONTACT SKYPE CUSTOMER SERVICE   |  HOW TO RECORD SKYPE VIDEO CALLS  | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES   |  WINDOWS PROBLEMS TROUBLESHOOTING   |  SKYPE DOWNLOAD LINKS  
    MORE TIPS, TRICKS AND UPDATES AT
    skypefordummies.blogspot.com

  • HRMS APP-PER-52803:Your business group does not match your security profile

    I see this as a common problem, please guide me as to what should be done to rectify it.
    While opening \Payroll\Description, it gives message as under:
    HRMS APP-PER-52803:Your business group does not match your security profile
    Regards
    Nemo

    Hi,
    I feel that "HR: Security Profile" option is not set properly, BZ of that screen is errors out.
    Please check the following Profile Options
    HR: Security Profile -- Enter the sec profile name which is business Group name
    HR: Business Group -- Your Business Group Name
    Note: If you set the HR: Security Profile optional first, then system will sets the HR: Business Group profile option too automatically.
    I hope this will solves your problem.
    thanks
    Krishna Prasad Rapolu
    Oracle HRMS Consultant.

  • Bridge does not save adjustments in camera raw when I press done

    bridge does not save adjustments in camera raw when I press done

    baines0788,
    Next time, please be precise when asked for details.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Fire fox shows a window which indicates that the yahoo tool bar does not have a security cert. Then runs using 99% processor

    a window pops up when i open Firefox which indicates that the Yahoo tool bar does not have a security cert. Seems to lock up when going to Comcast.net. Uses 99% processor and won't close.
    == URL of affected sites ==
    http://comcast.net

    Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
    Normal or safe mode still has same result. No startup, no option button and no customize.
    Thanks for your help. Got any other suggestions?

  • C 6180 does not print pictures from camera or computer

    C 6180 does not print pictures from camera or computer.

    I suggest fixing it
    If you would like to give us some information beyond it doe not work there is a a good chance someone can give you more advice on how to fix it
    Like what version of iPhoto - what happens, error messages, any strange that has happened, etc
    Just remember we are users just like you who know nothing except what you tell us so details are critical
    LN

  • I have checked the warn me when closing firefox with multiple tabs open but the system does not warn me and closes all of the tabs?

    i have checked the box that says to warn me if i am closing firefox with more than one tab open but if i do close with more than one tab open it does not warn me?

    For a summary of what to do to get the old behaviour back see this post from [https://support.mozilla.com/en-US/questions/804339#answer-158823 Helper 7677]

  • Why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all!

    why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all! I am running OS X YOSEMITE

    Trash – Empty When File is Locked or in Use
    Try holding down the option button while trying to delete the Trash. If that doesn’t work, here is some more information.
    Trash FAQ          
    Trash Permission Error
    Trash Permission Error (2)
    Trash Permission Error (3)

  • What does the following message mean?"/library/startupitems/comapcpcpestart. has not been started because it does not have proper security settings."

    Often when I start up my computer I get the message that an item has not been started "comapcpcpstart" because it does not have proper security settings.

    "Insecure Startup Items folder" message appears after logging in

  • I can not gain access to my gmail accounts because it is blocking thunderbird from getting my mail because Mozilla does not follow Industry Security Standards

    because it is blocking thunderbird from getting my mail because Mozilla does not follow Industry Security Standards

    Says who? Where are you getting this?
    I guess you believe the "Less Secure App" rubbish that gmail is putting out.
    Gmail has an option to allow these "less secure app" into their secure world.
    I also hear that the gmail world is flat. :)

  • HT201302 how do i take the photo albums i had sync'd from another computer off my iPhone? not speaking about the camera roll i can do that

    how do i take the photo albums i had sync'd from another computer off my iPhone? not speaking about the camera roll i can do that
    thanks

    i want to save the photos from the albums on my iphone...that i dont have on my computer

  • My Mac book Air (late 2010) does not detect built-in camera, can anyone help?

    My Mac book Air (late 2010) does not detect built-in camera, can anyone help?

    Is the apple tv on the latest firmware? and also make sure it is on (white light is on). I know that sounds stupid, but it will go to sleep if you let it sit long enough and i have seen many cases where you cannot acces it via airplay if it is asleep.

Maybe you are looking for