5230 not showing personal ringtones (not enough me...
Hi
I already wrote this to Nokia support but did not get an answer.
I have a 5230 with the latest SW 40.x. 55 Mbyte free phone ram and over 1 GByte on the sd-card.
I have 3 (yes, three!) personal ringtones on the sd-card. One (1,5 MByte) is used as the standard ringtone, another one (20 KByte) for incoming SMS. They both work. Now I made a third one (225 KByte) and wanted to assign this one to a contact. When opening the list of the available ringtones the phone complains something like "Not enough memory to show all ringtones. Showing only ringtones of the write-protected memory. At first it shows only the internal ringtones, along with two videos (Brache.mp4 and whoop.mp4). When I quit the list and directly open it again, it also shows the personal ringtones I have copied to the phone memory. But as the phone memory is not that big, I want to save the personal ringtones on the sd-card.
I don't understand why there is a "memory error" as there are 55 MByte free on the phone.
Any idea?
Regards
AF
I have the same problem.
Similar Messages
-
I have erased the passport for Mac and started all over. When there is ~15 minutes left in the initial backup of the mac mini hard drive (234 GB total), it gets weird and time machine states that it it calculating the time remaining. 24 hours later, it is still backing up but shows that <200 GB of 2 TB are available and it quits backing up stating that there is not enough room. HELP! The WD My Passport for Mac and the Mac mini are less than a year old.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr
Hello Pushtheriver,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud storage issues:
Get help using iCloud storage
This may also help:
Understanding iOS device capacity
You can sync and download many different types of content on your device. Some types of content (such as music and videos) typically take more space than others (such as notes and books). The amount of space taken by an app depends on the app's purpose; complex or graphically intense apps usually take more space than simpler apps.
If your device is near its capacity, you can remove some of the less used content to make room for more.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Iphone says not enough free icloud storage for backup, but shows 2.3GB free. Why?
iphone says not enough free icloud storage for backup, but shows 2.3GB free. Why?
Thanks for replying.
Sorted now- thanks -
"The ipod **** cannot be synced becaue there is not enough free space to hold all the items in the itunes library (additional 2.35 GB required)" but it shows 5.89 GB free. I recently bought a new laptop, and gave away my old one after deleting everything off it, including itunes, the problem started then,
Hi Terri 4514,
If you are having a "free space" alert when you try to sync, you may find the following article helpful:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Regards,
- Brenden -
I am trying to update my apps on my 4s but says there is not enough space. It shows i have 19.3 GB of 25 GB. Also, in my itunes...it shows about a quarter of space on the bar is photos but I took all the photos out. Don't make sense.
It's telling you there's not enough space *on your 4S*. The 25GB you refer to is probably that on iCloud, that's different memory than that on your iPhone. You need to delete video, pictures, apps, or whatever ON THE IPHONE, to make enough room for downloading updates to your apps.
-
I have tried to upgrade my TomTom app on my iPhone 4S and it failed saying 'Not enough spare space - manage your space in settings.' When I looked in Settings it shows there's plenty of spare space. The bloke at the Apple Store was baffled..... and said I needed an appt. at Apple. "Go and join the queue." When I got to the front of the queue another bloke said "There are no appointments available. You have to book one over there online...". When I went over there and tried to book one, it said "you can't book an appt until you've spoken to the Help Dept." And gave me a number. I phoned the help line and a machine said "We're all busy."
Any ideas?Hi, When you download, a big app udate like Tom Tom The other Tom Tom maps will be still on iphone until new update is complete That i why you need a lot of space until old updates Delete. So you will need to delete Apps & photos to make space. How much Gig has your iphone 4 s got? Cheers Brian
-
Not enough RAM message in Photoshop but preferences shows all 8 GB available
After a fairly smooth year and a half working with Adobe CS5 (Photoshop, InDesign, Illustrator) on my iMac 27" i7 I cannot open any file in Photoshop, no matter how small. I get the message "Could not complete the Open command because there is not enough memory (RAM)." even with all other applications closed and all 8 GB RAM available, and after restart. In Photoshop preferences my usual 70% RAM allowance shows as available. I also cannot view any video files in Firefox or Safari, but WMV and MOV videos play fine with QuickTime outside of the browsers. This all started after I completed the latest Apple security update (2012 001 I think it was) and also downloaded and installed Smith Micro's Anime Studio Debut 8.
I'm running an iMac 27" i7 (2010), 8 GB RAM, Snow Leopard 10.6.8, Photoshop CS5 Extended (InDesign and Bridge Adobe CS5 seem fine). Have done all latest Firefox updates as well. Video plugins: Flip4Mac, QT, DivX (all up-to-date far as I can tell)
Since this started Friday I've updated Pshop and Flash and all Adobe plug-ins, restarting afterward. I ran Disk Utility and found some files were out of order (or corrupted?), so ran the repair sequence using fsck single user/command-line utility since my superdrive hasn't been accepting discs for a couple of months. Which is also why I haven't just reinstalled Photoshop. Eventually I'll get the drive fixed and reinstall PS etc but this will not solve the video problem. It seems there must be a codec or plug-in problem (audio/video) I'm missing or which is not in the right place (and don't know how to look for it).
Been a Mac user for over 20 years and have never NOT been able to figure out my next move. Any help would be appreciated!I ran an extensive hardware diagnostic and after the second pass it came up with an error message that pointed to a RAM problem. Sure enough, one of the RAM components is now being replaced (along with the dodgy optical drive). Lucky me, I invested in Applecare.
I'm looking forward to getting it back, hopefully working smoothly. -
Mac Pro Book
Mac OS X 10.7.5
iPhoto 11 9.4.2
importing photos into iphoto, shows "Photo cannot import your photos because there is not enough free space on the volume containing your iPhoto library."
tried creat new library, same thing.
currently only has 2,500 photos in iPhoto
Importing about 500 photos, but cant do it due to the message showed above.
Who knows how to fix it?How much free space do you have on your hard drive? Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. -
I want to pay for a season of a show,on iTunes. My iTunes fund has some $ but not enough. I have a credit card registered. Why won't apple tv accept that for the remaining cost? Wanted the shows tonite.
Exactly what message appears?
-
i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks
i have reset the ipad and restored it to no avail
-
I am trying to sync an ipod touch 4TH gen. The capacity bar at the bottom shows I am adding 22.29g with 6.5 g free. Yet every time I try to sync it warns that there is not enough room an additional 868.9m is still needed. Does the capacity bar tend to be wrong or am I missing something?
Well when all else fails do a restore! This fixed my problem. Still don't know why the content bar differed, but what the hey!
-
Daughter mostly plays simple games on iPad mini. Now reached stage where says "can't download not enough storage2 although showing 14.9 gbs storage available.How do I overcome this icloud,dropbox or what?
Thank you in anticipation.Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
-
I couldn't download the new software onto my iPad or iphone because I didn't have enough storage. I paid the $20 for additional storage. Both devices are showing 15 GB of storage but both are still saying that I don't have enough storage available for the new download (3.3 GB req'd) What else can I do?
Delete some apps or stuff off your devices. The 'not enough storage' doesn't refer to iCloud space but space on your device.
If you have a bunch of downloaded music from iTunes, delete it to make room, you can always redownload it after the update. If you have movies, I'd go for them first since video takes up tons more room than audio (delete less movies is the same space as lots of music)
If you have apps you don't use, you can delete those, as long as you don't mind losing any data associated with them. -
My ipod screen shows "not enough storage" message but will not let me click on the cancel or settings button. How do I fix this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Maybe you are looking for
-
How can I scan multiple pages to one file with MG 7120
My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?
-
Nokia Maps 2.0 don't show maps on N95
Installed the latest firmware on the N95 (V21.0.016 14-02-08 RM-159 A5.01), formatted the memory card, installed Nokia Maps 2.0 (v2.0wk21b02), started it (in order for MapLoader to work properly), installed MapLoader 1.3.8, installed the swiss and ge
-
Hi Expert, Can I generate a query from Journal Entry Voucher with an open status that will show the following: 1. Posting date 2. Ref1 3. Account Code 4. Debit 5. Credit 6. Transaction Code 7. Profit Code Thanks and looking forward for your immediate
-
V$parameter view - How do I get these values for both instances on the db?
I have a procedure that dumps the contents of all the parameters from the system view v$parameter for auditing purposes, so that we know if a parameter changed from month to month, but we have 2 instances running. How do I make sure and log the param
-
Calendar events keep changing back after I change them
On my iMac 3.2 GHz Intel Core i5, 8 GB 1600 MHz, Yosemite loaded, calendar 8.0 events will not change. I can add events but not change them. I've tried refresh. I've followed all the troubleshooting re: to iCloud.