5230 + PC Detection via USB

I have a 5230 (v10.0.071) and I'm trying to connect it to my PC.
I've used the most recent versions of software updater, PC Suite and the Ovi software from this site but my phone remains "undetected". Windows 7 detects the device but fails to install it, which isn't something that surprises me.
Advice would be gratefully recieved.
Solved!
Go to Solution.

Hello
I have the good USB cable (CA-101). I have windows 7 64 bit.
I have the same problem. I have tried to uninstall and re-install Nokia PC Suite like administrator in compatibility mode with windows XP, but it's not very fine :
the software don't recognize the phone every time, and some application like the installer never recognize it....
When I try to connect my phone, windows start the install of drivers, but some of them are not ok :
CDC Comms Interface ___ X Echec
Nokia 5230 USB Modem __X Echec
I'm so sad about this ... bouhouh

Similar Messages

N9 not detected via USB connection

Since last few months I have observed that my Nokia N9 is not detected via any PC if connected via USB cable. The USB cable is OK because my other devices are easily detected through same cable. Can anyone suggest solution. I have already try to "Clear device" under settings->Reset.
Please help.

@girishpadia
Presumably your N9 still charges when connected to PC USB?
Does this apply to both Nokia Suite and Mass Storage mode presupposing that Nokia Suite is installed upon PC?
Happy to have helped forum with a Support Ratio = 42.5

Lumia 1020 not detected via USB on Windows 7 PCs

Hello - I hope you can help.
My new Lumia 1020 is not detected on any of 3 Windows 7 PCs I have access to. When plugged in the phone will begin to charge but the PC does not detect the phone at all - it doesn't appear under device manager in any guise (no portable devices or unrecognised devices).
OS 8.0.10517.150
Windows 7 64 and 32 bit
I have follwed advice on similar threads and been through the nokiatechsupport.co.uk troubleshooter on the issue which took me through the following:
Install Windows Phone app for Desktop
I just get the 'connect your phone' screen despite restarts of both phone and PC. Also tried switching the phone off and then plugging in = same result.
Factory Rest
Same result - phone is not detected, nothing appears in device manager.
I've also tried installing the Nokia software recovery tool but that doesn't see the phone either.
Have tried different USB ports on all PCs.
Any help much appreciated, otherwise next step is talking to my network support I guess?
Thanks
Iain
Solved!
Go to Solution.

Use the USB cable that came with the phone. Have you always done this?
A device that is under lock screen may not be detected and drivers will not load.
The desktop phone sync program provides nothing that will help the phone be detected.
The phone has to be seen by the PC and identified. When this happens the drivers are downloaded from the internet for the phone. Having the drivers does no good if the phone is not identified by the PC.
If you have access to other Win7 or 8 PC's try connecting to them. If you take it to anybody that is the first thing they will do. This helps determine if it is the phone or the PC.
If you take somewhere use Nokia Care.
One thing I saw today, user having the same problem. On the phone, start an app that connects to the internet, like a news app. Then connect the phone to the PC.
There are phones that won't connect.
You should see it in windows explorer. It should install in 'portable devices' in the device manager.

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device?

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device? A message from windows says: the device has malfunctioned.

Try TS1363: iPod: Appears in Windows but not in iTunes.
See also Corrupt iPod classic.
tt2

LaserJet Pro MFP M276nw software installer not detecting printer via USB or wi-fi - Windows 7

I am trying to install a LaserJet Pro MFP M276nw on Windows 7 Home Premium x64, and I know the printer functions fine, as I have installed it on both Windows Vista Basic x32 and Windows 7 Professional x64 all on the same desktop. The operating system has been changed a couple of times, hence the multiple installs.
I downloaded the full featured software from HP.com and went through the routine of installation as per usual, except that now the software doesn't detect the printer when it requests that I connect it via USB. Trying to install via wi-fi doesn't work because the printer still needs to be attached via USB in order to create the proper wireless handshake. Windows 7 detects the printer, and in-fact installed the drivers for it automatically. However, the printer installation software suite does not respond to the printer being connected, and just hangs there, waiting for it to appear.
I have tried multiple USB ports and it's the same issue. I've installed the basic driver also available for download on HP.com, but that software does not appear to include an option for scanning files to the computer. The printer itself will scan to email or to to a USB thumb drive, and even to a network folder, but not directly onto the computer. If it wasn't a necessary function of an all-in-one printer, I wouldn't bother with the scanning feature and simply make do with the basic printer driver.
Anyone have some sort of idea regarding this issue?

Hi @KP_ ,
I see that you are having issues with setting up the printer on the one computer. I would like to help you out today.
I would uninstall the software, turn off the Startup programs, Antivirus software and update the driver during the install by the post I have provided.
Disconnect the USB cable.
Uninstall the software.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Download, save and then run the latest drivers. Don't Connect the USB cable until prompted during the install.
HP LaserJet Full Feature Software and Driver.
Right after connecting the USB cable, follow this document immediately. A Fatal Error Displays During Software Installation. Disregard the title. If the printer stays listed properly, don't worry about updating the driver.
Test the printer.
Then you will have to go back and enable the Startup programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

I have an ipone 3 . it will charge from the wall charger but not in the car or via usb nor will itunes detect it ?

i have an iphone 3 , it will only charge from the wall charger. will not charge in the car nor via usb and itunes or pc wont detect it ???

maybe there is some sort of fuse in the cabeling or the iphone its self. Does it have a charge bar on the lock screen when it is being charged. How old is the iphone that may be the problem

Nokia PC Suite not detecting my N79 via USB.

Hello!
Got my N79 yesterday and having a bit of a problem with getting the Nokia PC Suite finding it. The program tells me to plug in the phone and when i do this nothing happens. I'm connecting via USB with a CA-101 cable.
Have tried reinstalling the Pc Suite a couple of time and same with the USB connectivity drivers.
I'm using XP Pro x64 SP2 on my PC and the Nokie PC Suite version is 7.1.26.0.
Any solutions?
Regards
Erik

Is the settings in your N79 for the data cable set to "PC Suite Mode" or "Always Ask on Connection"?
Did you try a different PC?
Is the phone getting detected as a removable drive when you connect it in Mass storage mode?
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

I can't sync iphone with itunes via USB, Im using windows 8.1 system, after update7.0.6 itunes was not detect the iphone, pls help....

can't sync itunes with iphone via USB, windows 8.1 system

Right click on your device under Portable devices and click on Uninstall and when the uninstaller box pop ups select delete the driver and click OK. Now click on Scan for hardware changes on top of the page and see if you get apple mobile device support driver under USB Devices and if not then disconnect your device from the computer and try to connect it to a different USB port and check also open control panel and select Apple Mobile Device Support from the List and Click on Repair and check. If still the device is not showing under USB then uninstall the following services from your computer.
iTunes
Apple Software Update
Apple Mobile Device Support (if unable to uninstall ignore and move to next)
Bonjour
Apple Application Support
Restart your computer once after the uninstallation is completed and then download latest version of iTunes from http://WWW.apple.com/iTunes/download
Locate the iTunes setup file and right click the file and run the installation file as Administrator and let the installation complete.
Then check if your device gets deteced in iTunes and if still the device is not detecting in itunes then go to device manager and see under Usb if you can see Apple Mobile Device Support Driver and continue with the step. 5 of above given link in my previous post. And if still thedevice is not showing under USB then right click on your device under potable device and click update driver and first check for updates automatically and see under USB if you see the driver now and if not then go back to device under portable device select update driver, let me choose driver from the list, Have disk, browse file in the following location " C://Program Files/Common Files/Apple/Mobile Device Support/Drivers and select usbaapl file and install the same (if you can't find the driver on above location then look for the driver in Program Files(x86) instead of Program files and if you can't find usbaapl then look for usbaapl64 and complete the installation and then restart the computer and check if your device get recognized in iTunes.
Note: when installing the drivers keep the iTunes closed till the drivers installation is completed.

Desktop Manager not detecting BB via USB

Ok I have an issue... this never happened before, but its really annoying now lol
I hope someone out there has had a similar problem... the friggen answer is probably staring me right in the face, but i'm just missing it.
Anyways only my Blackberry Desktop Software will not detect my Curve 8900 via my USB cable on WIndows Vista 64-bit. When the cable is plugged in, the phone charges, I am able to access my memory card that I have in the phone within Windows without a problem. Its just the Desktop Manager will not find the phone via USB.
The phone works fine connecting to Desktop Manager using Bluetooth. I can sync up no problem there. Its just the Desktop Manager will not find the phone via USB.
Let me stress the fact that use used to work... I don't get why this has happened.
Nothing appears in my Event Viewer, I get no error messages. The same phone, with the same USB cable works just fine on a Windows XP computer. Hell, it even works on the same computer, within a VMWare environment using the same USB port tried on the Windows Vista installation.
I have tried all the steps listed at this link:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02640&sliceId=SAL_Pub...
nothing seems to want to work
Does this make sense to anybody out there? lol
Let me list you my specs to make this clear
Operating System: Windows Vista Business 64-bit
CPU: AMD Phenom II X4 810
RAM: 8GB
etc..
etc.. lol
Desktop Manager Version 4.7.0.37 [Mar 18 2009]
Device Communications
Blackberry Device Manager - 4.3.1.15
BBDevMgr - 4.1.0.5
RIM USB Driver - 4.1.0.4
RIM USB Serial Driver - 2.1.0.4
Application Loader
Application Loader - 4.7.0.58
RIMProgram - 1.0.0.35
Blackberry Smartphone [located in Device Manager within Universal Serial Bus controllers]
Driver Date: 4/16/2008
Driver Version: 4.1.0.4
Message Edited by prot0fein on 07-12-2009 08:50 PM
Did ya miss me??

Hello prot0fein,
So I take from your post that the device and the computer communicate but only through your VM on the computer or using mass storage mode on the host. Am I correct about this?
Can you tell me what devices in device manager appear/disappear when you connect and disconnect your device on the affected computer?
Also, have you tried this article?
Article Title: How to perform a clean uninstall of BlackBerry Desktop Software
ArticleNumber: KB02206
Link: http://www.blackberry.com/btsc/KB02206
-tg
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Centro can no longer connect to PC via USB

I bouhght a new PC recently and since then I can not get my Centro to connect to the computer via USB. Ive installed the software and driver and it still says no driver detected whenever I plug it in. Its also popping in and out of the device manger screen like its keeps getting unplugged andplugged back in . Ive tried both the cd driver and downloadable one.
Im running Win7 now, but was using Vista64 Home Prem when I first got the computer..
I never had any problem on my old cpompuer which was running Vista32 Home prem
Post relates to: Centro (Verizon)

Hello JalenTigh, Welcome to the Palm Support Community.
Unfortunately, Palm Desktop software has never had a driver for any 64-bit operating system. This has been true for XP64, Vista64, and now Windows 7 64bit.
If I could direct your attention to the Windows HotSync section of this forum you will find many large threads discussing your issue at the top of the section.
You will only be able to sync via a Wireless connection - on your Centro, this would be via BlueTooth.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Laserjet 1505 connected to AEB 802.11n via USB keeps timing out after print

I have a HP Laserjet 1505 connected on my AEB 802.11n via USB and shared on my network, on my network are two macs connected via wifi and 3 WinXP PC connected via wire. I have Bonjour and WinXP laserjet drivers installed on all Win PC. Everytime I print from any of the computers, it will print the first time, but when I try printing again from any of the machines, the macs and winxp pc's cannot detect the printer. When I go to airport utility, the printer cannot be detected anymore. I have to hard reset the AEB for it to detect the laserjet printer again. But the same thing happens again after I print out another document. Has anybody encountered this kind of problem. Can anyone help me resolve this?

Here is what I got from HP support :
The driver for the Laserjet P1006 is not available yet for Os 10.5...we are hoping it will be release in the next week or so...please click on the link below to sign up for an email update as soon as it is available..As a workaround, some people have been able to use the 10.4 driver from the cd, but this is not guaranteed to work in all applications therefore the only solution is to wait and install the 10.5 driver.
So we wait.
Yves

IPAD connected via USB does not show in Windows

PC Specs : HP ProBook Windows 7 Professional 64 SP1 32 bit 4GB RAM 320GB HDD, Kaspersky ES 10.
I have a client with an iPhone which he connects to his laptop via the iPhone USB cable. He used to copy pictures from the device onto his laptop. Today that does not want to work any more for some reason. If he connects it, it simply does not even detect in
Windows. It doesn't even charge ! Before Windows, in the BIOS , there it charges. In Windows, in the device manager it does not even show anywhere. Also, it does make a one-time-connected-system-sound, when it is plugged in but that's all. In device manager,
there is no alert, no exclamation or error.
What was tried so far :
1.) Disabling anti-virus.
2.) Removing Upper Filter in HKLM/S/CCS/C/Class/[ID] for USB devices of Kaspersky driver association.
3.) Testing the iPad and the USB cable on other machines : Cable works fine.
What I still need to try :
1.) Installing Apple Mobile Device Drivers
What I do not want to do :
1.) Re-install Windows
2.) System Restore (restore points are very old, so unit will use many settings and programs if I do a restore).
What else might I try to get this working ?

Thanks for the responses !
@Milos Puchta :
No things I can see regarding the issue in the Event Logs. Updates were installed on the 15/08/2014... Maybe you can tell me which ones were problematic so I can see if they are installed (There are a lot). Maybe one of them was the culprit with other people
... a known update that was known to cause this
@SenneVL :
The USB are working perfectly. I tested my own USB drive, a USB hard drive, mouse etc and they work wonderful without issues. I must note that some or all of them also have the Upper filter installed. I installed ITunes (which comes with Apple Mobile Device
Driver) and confirmed the service is running. I will post on the Apple Forums too... when I do get time.
I checked with a resource monitor. If I connect the iPhone via USB, it throws out this (amongst million others) :
RegOpenKey, SUCCESS
HKLM\System\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8BC1B9352C1771F5E5981DE35FEE26E08E5DE63B
This relates to Apple inc (VID_05AC)
This is the registry key
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8bc1b9352c1771f5e5981de35fee26e08e5de63b]
"DeviceDesc"="iPhone"
"LocationInformation"="Port_#0002.Hub_#0004"
"Capabilities"=dword:00000014
"HardwareID"=hex(7):55,00,53,00,42,00,5c,00,56,00,49,00,44,00,5f,00,30,00,35,\
00,41,00,43,00,26,00,50,00,49,00,44,00,5f,00,31,00,32,00,41,00,30,00,26,00,\
52,00,45,00,56,00,5f,00,30,00,34,00,31,00,30,00,00,00,55,00,53,00,42,00,5c,\
00,56,00,49,00,44,00,5f,00,30,00,35,00,41,00,43,00,26,00,50,00,49,00,44,00,\
5f,00,31,00,32,00,41,00,30,00,00,00,00,00
"CompatibleIDs"=hex(7):55,00,53,00,42,00,5c,00,43,00,6c,00,61,00,73,00,73,00,\
5f,00,30,00,36,00,26,00,53,00,75,00,62,00,43,00,6c,00,61,00,73,00,73,00,5f,\
00,30,00,31,00,26,00,50,00,72,00,6f,00,74,00,5f,00,30,00,31,00,00,00,55,00,\
53,00,42,00,5c,00,43,00,6c,00,61,00,73,00,73,00,5f,00,30,00,36,00,26,00,53,\
00,75,00,62,00,43,00,6c,00,61,00,73,00,73,00,5f,00,30,00,31,00,00,00,55,00,\
53,00,42,00,5c,00,43,00,6c,00,61,00,73,00,73,00,5f,00,30,00,36,00,00,00,00,\
00
"ContainerID"="{27b106ba-aa0b-5135-b303-213164031771}"
"ConfigFlags"=dword:00000000
"ClassGUID"="{eec5ad98-8080-425f-922a-dabf3de3f69a}"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8bc1b9352c1771f5e5981de35fee26e08e5de63b\Device Parameters]
"ExtPropDescSemaphore"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8bc1b9352c1771f5e5981de35fee26e08e5de63b\LogConf]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8bc1b9352c1771f5e5981de35fee26e08e5de63b\Control]
can you see anything wrong with this key ?

HP Officejet 5610: Problem Adding Printer via USB

Hello. I am trying to print via USB on a HP Officejet 5610. My Mac has detected it via USB. I tried to add it by "Default Printer." I got the model "HP" but could not find the model "Officejet 5610" for the gimp-print. I tried a few random models to print but none of them work. Could someone help me please? I do not have the installation CD. This is not my house. The person who owns the printer is usually not home and his computer locked.
Thank you.

Disconnect the printer. Remove references to it from print and scan in system preferences. Remove the HP folder from /Library/Printers. Reconnect it. Try again. It should dowwnload drivers.

USB ports stop working after windows 7 installation via USB Boot camp

topend macbook pro retina 15 model purchased in Jan 2014 ,upto date.OS X 10.9.1
tried installing windows 7 ultimate through boot camp using USB. the installation is fine and smooth. windows 7 ultimate is properly installed but the point where you install the support software through USB all the USB ports die out just before logging in into windows. Also a red light on the headphone jack goes on. NO USB flash drive orUSB device is operational or in other words detected by the mac. Hence neither can I finish the support software installation which has all the necessary drivers nor connect to the internet . tried the SMC/NVRAM reset as instructed by the apple support but no change in the situation.
USB ports fully operational when boot in MAC os .
Another problem I face is when I try connect my iphone 4S to macbook pro via USB it keeps connecting and disconnecting and makes the charging sound repeatedly . The same iphone can connect to other laptops flawlessly.
please help .
Thanks

Since you just bought it, you may want to make a Genius Bar appointment and let them diagnose the issue. Use your warranty. Bring your phone and cable along too.

5230 + PC Detection via USB

Similar Messages

Maybe you are looking for