5233 camera unable to open.

Hi i am using nokia 5233 nd i cnt able 2 open it ....so guys pls help me...
Solved!
Go to Solution.

Hi, Hotoka.
Did something happen to the phone prior to this issue? What exactly happens when you try to open it? Are you getting any error message when trying to open the device's camera? Aside from updating and re-installing the device's software, what other troubleshooting steps have you done? How about a factory reset by going to Settings > Phone > Phone mgmt. > Factory settings?
If that doesn't help, you can also try to recover the device's software with the use of Nokia Software Recovery Tool which can be downloaded here:
• http://www.nokia.com/gb-en/support/faq/?action=singleTopic&topic=FA142987
If the issue still persists, you can always bring the phone to one of our Nokia Care Points for an assessment:
• http://www.nokia.com/global/support/locations/

Similar Messages

Canon EOS 5D Mark II Digital camera - unable to open raw files

Hi I have downloaded some raw files from my brothers
Canon EOS 5D Mark II Digital camera
and I cannot see them? Mine are ok from my Canon 40D.
Juliet

Try this TechNote for a solution:_
http://kb2.adobe.com/cps/407/kb407110.html

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

?unable to open raw photo file after downloading camera raw 7.4 update?

Can anyone help please.
I recently had my lap top wiped and have had to re load CS6. I have also downloaded the camera raw 7.4 update (I use a Nikon D7100 camera) The update downloads without any problems, I go through download, install and then finish, but I still am unable to open my raw photos. I get the following message... 'if you are attempting to open a raw file from a digital camera, make sure you have the latest raw camera update installed'. I have no idea why it is doing this, or how to combat it. Any suggestions would be much appreciated. Thanks in advance.
Gail

Hi Benjamin,
You were right. It was the camera's provided software transfer system. I've copied them directly from the (same) card to the desktop and works.
Many many thanks! Cheers

HT203175 "apple mobile device failed to start" "verify that you have sufficient privileges to start system services" came up on windows XP upgrade to 11.1.4 and since have been unable to open itunes - uninstalled and tried reinstall to no avail - what to

"apple mobile device failed to start" "verify that you have sufficient privileges to start system services" came up on windows XP upgrade to 11.1.4 and since have been unable to open itunes - uninstalled and tried reinstall to no avail - what to do ? Ken

I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help?

Unable to open image in camera raw in CS3

I have CS3 and I'm unable to open images in camera raw. I updated to 4.6 but it hasn't helped, and I've tried suggestions such as "open as" and then "formats" and choosing "camera raw"...still doesn't work. Adobe is not able to help me over the phone due to the older version of Photoshop...any thoughts or help? Thanks so much.

A critical piece of information would be what camera model the RAW images you're trying to open are from.
Each model camera must be supported specifically in Camera RAW. If your camera is newer than the latest ACR version available for your Photoshop version then you'll be unable to open the RAW files in ACR.
Three solutions are:
Use the latest version of the free DNG Converter from Adobe Updates < http://www.adobe.com/downloads/updates > to convert each RAW file to a DNG and then that DNG will be openable in the older ACR version. You may need to change the ACR-version compatibility setting in the DNG Converter. This solution is free but doubles your storage space if you keep your original RAW plus the DNGs.
Buy Lightroom (which is less than half the price of Photoshop) and continue to use your older Photoshop with it. The adjustments you do in LR are the same as you'd be able to do in ACR (actually more because the newest version of LR and ACR have more adjustments)
Upgrade to or buy the latest version of Photoshop, depending on your upgrade availability.
I personally have both Lightroom and Photoshop and use LR 90% of the time.

Camera Raw images unable to open in bridge or CS6?!

I am unable to open my raw images from bridge to ps cs6. The error comes up as 'Camera Raw Cannot open this file'. I have tried downloading the latest camera raw updates and patch installers, but nothing still works. Please help!

We're going to need a bit more information than that.
Are you using ACR 8.8? Press F in Camera Raw to check the version in the title bar.
Which camera make/model produced the raw files?
How did you get the files onto your computer (connection & software)?
Have you tried the camera manufacturer's own software to open the files?

Unable to open d800 files with cs6 and camera raw 8.3

unable to open d800 files with cs6 and camera raw 8.3

Have you used Nikon Transfer on those files? Early versions are known to corrupt files so that ACR can't read them. Nikon has since fixed the bug so new versions are safe.
Here's a thread (with a fix) in the Lightroom forum: https://forums.adobe.com/message/6253962

I am unable to open my iphotos have tried the command,option hold down thing and nothing can open my photo libary but no the iphonts, can't get photos off my camera or iphone onto my mac.?

I am unable to open my iphoto, have tried the command, option hold down, nothing, can't get my photos off my camera or my iphone, but i used to be able to?

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Select the Purchases page in the App Store and locate the app(s) in your purchase history. If there's a button markedACCEPT on the right, click it.
Step 2
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 3
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
Step 4
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 5
Delete the app(s) you want to update and reinstall them.
Keywords: refunded canceled

Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III files. SNo support or upgrade availab

Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III files. SNo support or upgrade available on the site but 6.7 upgrade.!Please advise

http://labs.adobe.com/technologies/cameraraw7-1/

Photoshopcs6 mac 0sx10.9 unable to open NEF files, already installed camera raw DNG converter 8.6

just installed photoshopcs6 running mac 0xs10.9 , installed DNG converter camera converter8.6 and still unable to open NEF files

Which nikon camera are the nef files from?
If you go to Photoshop>About Plug-In and click on the words Camera Raw, what version does it say?
Have you tried Help>Updates from within photoshop cs6 to the camera raw 8.6 plugin?
(then you shouldn't have to use the dng converter, unless your nikon is a very new model)

I am unable to open some of apps, even one inbuilt app like camera, Example : regarding apps like Clash of clans and Bike race TFG.whenever I try to open these games, it start opening and in middle of opening , it sent me back to home page of my mobile.

I am unable to open some of apps, even one inbuilt app like camera, Example : regarding apps like Clash of clans and Bike race TFG.whenever I try to open these games, it start opening and in middle of opening , it sent me back to home page of my mobile.Please help what to do ? and with camera when open it it open a blank Black page, please help ?

You should really read the manual. Click Support at the top fo this page, then click Manuals.
You should be syncing to your computer regularly. Your game data is backed up when you sync.
First try a restart. This eraes nothing.
If that does not solve, then try a reset. This erases nothing.
If this fails then try a restore

Unable to open Apple application

Last week, I did the most current software updates. Ever since then, I have been unable to open certain Apple programs such as iChat, Skype, Preview, Pages, Photo Booth, etc. I have tried to download AIM, but the computer says it isn't supported. Also, now when I try to open Photo Booth, it says my graphics card doesn't support it, but I have never changed the card from the one the computer came with. The programs will open up, and then immediately quit, and I am left with "The application _____ quit unexpectedly" message. No matter how many times I relaunch and reset, ignore, or report, I can't get them to open. I'm in college and really have no way to get to a Genius Bar for a few more weeks, and I don't have the Leopard disk with me. Is there any way I can fix this on my own? Thanks!

I think it was the repair disk permission that actually worked for me. I tried it once and got no result, and then tried to download the updater. For whatever reason, I couldn't even download that. So I went back and did the disk permission repair again. It still didn't seem to work, so I just turned the computer off out of frustration. When I turned it back on, it was all fixed. So I'm not entirely sure what it was that fixed it...all I know is it works now!

Error unable to open script file

I have been using DW8 since it came out. I am running Windows 7. Everything was working fine until I had hard drive failure. Replaced hard drive reinstalled Windows and DW8. Now when I try to insert an image I get the message "unable to open java script file c:\program files\Macromedia\Dreamweaver 8\configuration\objects\common\AccessibleImage.js (error 2)".
I have done the usual--rename config file--reinstall DW8--clean register and reinstall--run as admin.--run in compatibility with XP SP2, etc. but nothing works.
Help would be invaluable to me.

Your version isn't listed here but something on this page may help you...
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html

"Unable to open project file" Error Message

I pulled an all-nighter (13 hours of editing) last night to create a critical project in FCE 3.5.1 on my Intel iMac running 10.4.11 then left this afternoon for a few hours and shut down my machine. Came back tonight and tried to open the project (which I saved on my Maxtor 1 TB external drive along with all of the scratch disk files). To my absolute panic, it won't open the file now with an error message that simply says, "Unable to open project file". HELP!!!! Anyone have any suggestions?!?!

In the past I found (and reported to Apple Feedback) the same bug Steve reports here, but I should recall that the problem:
- only appeared in PAL projects (probably not the case for kscritch) - never heard of it in NTSC
- was consistent in FCE 3.x, not so in FCE 4
I made tests importing .psd images with transparency into PAL projects using FCE 4, and I had various behaviours: sometimes the project worked, sometimes I couldn't open the project again (as in FCE 3), sometimes I had error messages with inconsistent behaviour (msg like "file error", but the project opened and file was there...), etc. so I decided to do without.
Now I only import .tif or .png images when I need transparency
Piero

5233 camera unable to open.

Similar Messages

Maybe you are looking for