5233 Memory card stopped working!

Hi,
I've had this phone for almost a year, it's good but there have been few problems.
I have an 8 GB memory card, which I had to reformat recently. Today I was downloaded a theme from nokia store. But suddenly my memory card stopped working. I re -inserted it but it doesn't show on phone.
56 MB of my phone memory and 6.5 GB of my external memory is free. I cant reformat cause memory card is not showing on phone.
Another problem that's appeared is that while typing, if move the cursor back it goes through each alphabet instead of each word.
3rd thing is wen I first posted here there was an option that allowed me to check response via email. Its not here anymore.
Please help all my data is on memory card.
Regards
Solved!
Go to Solution.

Hi mtank,
Thanks for your post.
If the memory card can't be read in the phone try your memory card in a cardreader connected to a PC to verify if the card is readable still. If it is copy all content to the PC and format the card. Then check the card in the phone and if it is accessible copy all content back to it from the PC. If you still can't read the card on the phone replace it with a new one. You can copy the original content to it from the PC first.
Hope this helps,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Similar Messages

Graphic card stops working, then recovers

I recently installed the plug-in for Pixel Bender on CS5.
When I open a jpg, and choose OilPaint, with the check box for GPU, as soon as I hit the OilPaint filter, my graphics card stops working, the screen goes black for a few seconds, then comes back on. I get a message that the card stopped working, but recovered.
I surmise this is a graphics card issue, or memory, or both? I don't know for sure.
I'm using an HP PC with 6 Gb RAM, and the card is a Nvidia GeForce 9500GT. The drivers for this card are all up to date.
CS5's performance settings are: 2 scratch discs (not the boot drive) with nearly a terabyte free space on one, and about 250 Gb on the other. The program shows about 5.7 Gb of available RAM, and the preferred setting (maximum) is about 3.8 Gb. I've got it at 3.7 Gb.
When the card recovers, it takes several minutes before I can see the image in Photoshop again. Then, when I try the filter again, I uncheck the GPU box, click on the OilPaint filter, and get a window that says the process timed out, and gives me 2 options: try again or cancel. After about 6 or 7 try-agains, the image will have the filter applied. It takes another 5 or 6 tries to finish with "OK" and then the image shows up in the pane, in Photoshop.
My computer has a 350W power supply, so the GeForce 9500 GT is the biggest card I can use in it.
Is it a question of an inadequate graphics card? Or, not enough RAM?
I could install a new power supply for the PC, then get a different card, if that would solve the problem. But, since I'm not sure if this is what I need to do, could I please have some suggestions on my issue with this whole thing?
Thanks very much.
Alan

Thanks for those links. I missed them, because I just had Windows search for updated drivers, and when I told it to search online, it said that the drivers were up to date. So....well, I'm sorry I didn't check NVIDIA directly. I appreciate your help in this.
Anyway, I did install the updated drivers. I rebooted the machine, just to make sure (I checked the properties of the card, and it showed the updated driver listed).
I re-tried the OilPaint, and the card crashed, as before. It gave me this message:
"The NVIDIA OpenGL lost connection with the display driver and is unable to continue. The application must close." It then closed CS5 (Bridge remained open, though).
It said there was an Error code: 8.
Thanks again for assisting me on this. What would be the next step to resolve this?
Alan

When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!

When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3. I want to sych with iTunes but clearly must upgrade to >10.1
When I do, my network card no longer works on my desktop. Please HELP!
My spec is;
NETWORK CARD;

polydorus wrote:
This isn't my thing, but the following post on this seems to have helped some people:
http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.)

32g sd card stopped working ,is there an answer to correctig problem ?

32g sd card stopped working , is there an answer to correcting problem ?

take it out and put it back in
reformat it
have you tried it in a pc with card reader?
buy a new card?

Sdhc cards stopped working with 10.9.1 update

sdhc cards stopped working with 10.9.1 update. I've tried multiple readers with no affect. Any ideas?

Have you checked for an update and/or asked the developer for help?

After Software Update 2007-004 airport card stopped working after wakeup

Hi,
I have a powerbook G4 - DVI running 10.3.9. After I have installed Software Update 2007-003, when my computer goes to sleep and then wakes up, airport card stops working. I had to open the back of the computer, unplug and plug the airport card, then it starts working again. But next time the computer goes to sleep, it stops working again.
Does anyone have a similar problem? Any work arounds?
Thanks in advance.
Also following is the logs from Software Update. Looks suspicious:
Mac OS X Version 10.3.9 (Build 7W98)
2007-04-28 18:56:03 -0400
2007-04-28 18:56:03.190 loginwindow[181] FSResolveAliasWithMountFlags returned err = -43
WirelessScan timeout waiting for first scan result
WirelessScan timeout waiting for first scan result

Deleting AppleAirPort2.kext solved the problem for some...
http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
While others had to rollback the AppleAirPort.kext to version...
http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

Satellite A - LAN card stopped working

I purchased my A series in April 08 and a few weeks ago the LAN card stopped working. It just won't connect and can't get emails and doesn't connect to any web pages.
Currently have the computer working off wireless but does anyone know how to fix the LAN Card problem.

Hi!
Which Satellite notebook do you have exactly?
Does the notebook recognize a LAN cable if you plug in it? Is the LAN connection enabled in Windows?
Try to update the LAN driver and the BIOS. Both you can find on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

My SIM card stopped working, is that an issue to address to my phone carrier or to apple?

My SIM card stopped working, and I have no idea why. I've had my phone for four months... Who can I bring it to to get it fixed?

Is there an error message? What is the exact wording of that message?
Remove the sim, clean the contacts, reseat the sim.
Go to your wireless provider and get a new sim.
Make an appointment at your local Apple store to have the iPhone evaluated.
http://www.apple.com/retail/geniusbar/

HELP HELP HELP .Memory card not working in E71

I have bought a brand new E71.I am not able to access the memory card on E71.The mobile is accepting the card without the sim card.When i put in the sim card with the memory card it is not working.Memory card is only working without the sim.The same memory card is working in other E71.Is there any way to solve this issue.The card is also readable in the computer.I tried restoring factory settings.Anyways to solve the issue.
Thanks in advance

Hi,
did you:
1)try to reformat this card in phone?
2)check other memory card in your phone, it can be some hardware failure.
Message Edited by hieronim69 on 20-Jan-2009 10:58 PM
N95 & N96 User

After Service, Airport card stops working randomly on macbook pro 17" early 2009

Hi,
So after the last time my computer was serviced, the airport card stops working randomly on moving the screen.
Upons restarting the computer, it sometimes says wi-fi hardware not installed. Then, if I move my machine around,
lift it up, turn it around, place it back on the table and restart it, it works again. I don't understand this.
And all this started happening the moment my warranty ran out. Extremely frustrating!!

It may be possible that one of the following may be the issue:
The internal AirPort Extreme card is not seated properly.
The internal Wi-Fi antenna connector is not seated properly in the AirPort Extreme card.
The internal AirPort Extreme card's connector is faulty or damaged.
The internal AirPort Extreme card is faulty.
To get an idea on how the Extreme card is installed, please check out the following iFixit article.

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

HELP! - Lumia 800 memory card not working :/

My phone decided to go into the notorious restart loop - So following everyones advice on teh internet I performed a hard reset.
It loads the orange sign - then the Nokia sign - then the windows mobile sign as if the phone is about to start with the noises etc... then it decides to goto a screen says
"MEMORY CARD NOT WORKING
Your memory card has changed, is damaged or is non-compatible.
To fix this, turn your phone off and either remove the memory card or replace it with a new compatible card. Then reset your phone to the original factory settings.
To learn how to reset your phone, refer to the owner's manual"
I also get the option to make an "emergency" call or "turn off" the phone. the volume buttons also work the volume fine aswell as the option to change the phones mode from silent to vibrate or vibrate and ring.
Tried hard reset numerous times, tried charing the phone for hours on end and trying it, tried soft resets. Basically the only options i've found.
Just to add.... Why would a phone with no memory card slot even have a message stating that the memory card is faulty and that i could even remove or replace it???
I hope someone manages to help me without having to cough up £50 excess to my insurance.
Anyone come across this before?

Sorry, it's my standard response, but your phone doesn't work. Take it back to whoever sold it to you. It's a consumer good, consumer protection rules apply.
Your problem certainly has novelty value but if you've done the hard reset and it didn't work you're at the end of the fix it yourself stage.

Satellite A210-1AP - video card stopped working playing Call Of Duty 4

Hello,
I am having problems with my video card.
When I was playing call of duty 4 in 5 minutes my video card stops working and screen restart.
Then it says Your video card stopped working, and problem solved.
My video card is ATI Mobility Radeon HD 2600.

> Then it says Your video card stopped working, and problem solved.
And? Is it working now?
Possibly the graphic driver hung and therefore you received this message.
Its also possible that the GPU temperature was too high and therefore the message appeared.
The COC 4 needs a lot of hardware resources and everything must run with full performance! Therefore there is higher heat dissipation and this can lead to graphic card issues.

Ethernet Card Stopped Working (BCM5785M)

My ethernet card stopped functioning about a week ago, at the time I thought my cable had died and did not think to much of it. Then I checked the cable in my desktop computer and it worked fine and was able to connect to my router as well as the interent. To the best of my recolection I did not install any new software that may have cuased the problem, just standard pacman package updates. I ran throught the Networking wiki to try and see if I could find anything wrong but was not able to solve the problem. The odd thing is when I try and connect to my router I obtain and IP address of 192.168.1.128 which to my recolection was a fall back address when an error occurs. I normally will run my laptop on my ethernet card just becuase of shotty wireless router suppled by my ISP. I am able to use my wireless card without problems, other then the substandard performace of the wireless router, so my networking appears to be generally functioning on the computer.
- Lspci -v gives the following output for the network card.
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
Subsystem: COMPAL Electronics Inc Device 0025
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at f0000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
I went to Broadcom's website and the tg3 driver was the correct driver listed for the device.
I checked to ensure that the tg3 module was loaded and running at start up as well which it was.
-dmesg |grep tg3 returned the following (I did edit out my MAC address with all zeros)
[ 5.167906] tg3.c:v3.122 (December 7, 2011)
[ 5.236677] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 5.296677] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 5.356733] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 5.357927] tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:00:00:00:00:00
[ 5.357931] tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 5.357934] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 5.357937] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 9.667630] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 181.228436] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 181.228439] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 196.452292] tg3 0000:04:00.0: eth0: Link is down
[ 198.139080] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 198.139084] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 213.460062] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 213.490759] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 213.594112] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 215.212240] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 215.212244] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 317.747290] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 319.365458] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 319.365462] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 677.340714] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 677.450541] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 679.089732] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 679.089736] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1458.870527] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1458.980505] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1460.537332] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1460.653833] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1463.029526] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1463.029530] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1463.460524] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1465.088599] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1465.088603] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1466.403974] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1466.534005] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1468.152175] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1468.152179] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1469.364042] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1471.003175] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1471.003179] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1474.737324] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1474.843977] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1476.462073] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1476.462076] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1538.923961] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1540.563060] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1540.563064] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
The firmware out of date looked odd to me but seems to be a common thing with the driver at least when I searched the net. I found that message appear several times but without anything posted about my specific problem.
-Running dhcpcd on the ethernet card produces the following output
dhcpcd[3932]: version 5.5.6 starting
dhcpcd[3932]: eth0: sending IPv6 Router Solicitation
dhcpcd[3932]: eth0: broadcasting for a lease
dhcpcd[3932]: eth0: offered 192.168.1.128 from 192.168.1.1
dhcpcd[3932]: eth0: acknowledged 192.168.1.128 from 192.168.1.1
dhcpcd[3932]: eth0: checking for 192.168.1.128
dhcpcd[3932]: eth0: sending IPv6 Router Solicitation
dhcpcd[3932]: eth0: leased 192.168.1.128 for 86400 seconds
dhcpcd[3932]: forked to background, child pid 3975
The router IP address is 192.168.1.1
If anyone can be of assitance I would appreciate it. If any other command out put might help feel free to let me know.
Thanks

Trilby wrote:I only have one little thing to contribute - but first I wanted to say welcome to the forum and awesome first post. This is a great example of how to ask questions the "right way" to get a good answer. Sadly I am not the one with that good answer.
Well thanks for the compliment. this is my first post here but not my first go with linux. I started using linux back when Red Hat was still avalaible under the GNU as a free distro. Then to Fedora in beta, Gentoo. Ubuntu, and now Arch. I have been running arch for about two years and just have not needed to post do to generally finding my answers in the wiki or on a forum post either here or else linuxquestions as well. I guess that leads me to say that this distro is one of the most well documented ones I have ever used. Gentoo would be the only other who comes close but that is needed just with the complexity involved in the install.
Trilby wrote:
I will say though that everything looks perfectly in order. The DHCPCD is good, and it shows that you are connected. I assume you recognize an error as a browser does not connect. But have your tried other web-tools to see if they can connect? A good starting point would be ping. Try each of the following:
ping -c 3 google.com
ping -c 3 8.8.8.8
and post the output here.
I did try a ping on the google site both with the name server as well as the ip while going through the network wiki. I also tried a ping to the router it self without success.
[scar@thecube ~]$ ping -c 3 www.google.com
ping: unknown host www.google.com
[scar@thecube ~]$ ping -c 3 google.com
ping: unknown host google.com
[scar@thecube ~]$ ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 192.168.1.128 icmp_seq=1 Destination Host Unreachable
From 192.168.1.128 icmp_seq=2 Destination Host Unreachable
From 192.168.1.128 icmp_seq=3 Destination Host Unreachable
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2008ms
pipe 3
[scar@thecube ~]$ ping -c 3 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.128 icmp_seq=1 Destination Host Unreachable
From 192.168.1.128 icmp_seq=2 Destination Host Unreachable
From 192.168.1.128 icmp_seq=3 Destination Host Unreachable
--- 192.168.1.1 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2008ms
pipe 3
I guess one thing I did forget to mention is that the LEDs on the ethernet card seem to be functioning as well when I plug the cable in.
EDIT:
Interesting Update.
I was able to connect to my router as well as the internet by switching over to a static IP. I made sure to set it as high as possible but it did work. I was browsing around and saw another post on the forums and someone suggested to switch to static IP to help troubleshoot the problem.
Here was the post I found: https://bbs.archlinux.org/viewtopic.php?id=143183
Last edited by Ronin324 (2012-06-12 09:59:50)

No audo, usb not working, memory card not working and webcam not working

my audio, usb ports, webcam, and memory card reader stopped working all of a sudden about 3-4 weeks ago i tired restoring it to factory settings nothing helped. need my laptop to work for school i need to use all these device for a class i am taking!
these are specs for the laptop
»HP G62t-350 CTO Notebook PC
Serial Number: {Removed for privacy}
Product Number: wv689av
have a 64 bit

Hi:
The touchpad driver from your notebook's support and driver page is sp69626...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-145252-1&cc=us&dlc=en&lc=en...
The PCI Device (card reader) needs this driver...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1&cc=us&dlc=en&lc=en...
Download and install the amd chipset drivers and reboot for the usb 3...
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

5233 Memory card stopped working!

Similar Messages

Maybe you are looking for