5250 - Windows : USB Device not recognized

Hello everyone.
i tried everything that i know to fix this problem
but still getting errors..
could anyone help me? please.
Attachments:
Untitled.png ‏50 KB

i tried reinstalling ovi suite... and removing all drivers.. but nothing works
i reformatted my laptop hoping that it will fix the problem..but still nothing happened ..

Similar Messages

TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???

Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod".

"USB Device Not Recognized" Bubble/ Ipod won't connect to Windows

Whenever i connect my ipod to my computer the ipod goes to "do not disconnect" and a bubble pops up on my computer saying "USB DEvice Not Recognized" i have switched it to all of my usb ports and unplugged all usbs except for my mouse at the same time. this happens 95% of the time. my ipod does charge while connected and it has only connected to itunes once in the past 2 weeks. im not sure if it is itunes because it started around the time i updated to itunes 7. since it is a windows bubble though i think it is a windows or ipod problem and not itunes. i have a dell that isnt great but works fine.
thanks for any help.
... Go TTU!

Make that two idiots. My roommate got a Sansa and I decided to try out the cable. Nothing happened. Now suddenly my nano isn't recognized by my computer. I'm glad I read your post, now I can stop looking high and low for a solution. Until this happened it worked good as new.

USB device not recognized in Windows 7?

I have the strangest problem I've yet to encounter with my computer.
As you may have guessed from the title, I am constantly getting the message displayed. Any fix that has been suggested has been unhelpful or worked for a bit until my computer restarted again (I'll get to that)
First off it started when I noticed my mouse pointer was acting very weird, it was just a vertical line of dots. A forum said an easy fix to the problem was to update my GPU drivers, which I needed to do anyway. So after an update to the GPU drivers
I log into my computer (which is password protected, this is slightly important to remember) and I try to go to youtube. I click down at the start menu to type in chrome and nothing appeared. I was able to move the mouse around and click on things
but I was unable to type anything.
Luckily for me I have a laptop as well so I checked for any solutions on my laptop and they said that it was a problem with the model of my keyboard specifically This was odd to me considering most of the problems happened OTB for the keyboard and not
a month after use, plus I was able to plug it into my laptop and it worked just fine. When I plugged it back into my desktop it gave me the same problem: I couldn't type anything, I also noticed the little pop-up informing me that the USB device was
not recognized. "Well, great, time to get my backup keyboard," I thought to myself. Except, that was not the case either. I plugged my backup keyboard into every single USB port on my Computer Tower, even going so far as to unplug
the mouse. Absolutely nothing was working. I constantly restarted my computer and each time got the same problem; I'm able to type in my password to log in and then a few minutes after that the USB device stops working. Sometimes after plugging
one of the keyboards back into a USB port I would get a message saying it was installing drivers; and then would fail in installing any.
After a bit I navigate through the menus with just my mouse and do a system restore to before the GPU drivers were installed. After that, I started windows in SafeMode and then turned my computer off. Finally, I unplugged my computer completely
of all plugs (including my power plug), waited a few minutes, then plugged everything back in again. Amazingly, this fixed the problem, but then it got worse.
After about an hour of gaming, my computer BSOD's, most likely because I decided to alt+tab out of Tomb Raider during a loading screen to stop a video I had on. I restart my computer again, and then the problem returns, only this time absolutely
no USB devices work except my one keyboard. The backup keyboard, and both my regular mouse and backup mouse stop working a few minutes after logging in. I try to fix the problem like before, but to no avail. Any USB device I plug in either
gives me the "USB device not recognized" or attempts to install the drivers and then fails.
If there is ANY way to fix this problem, it would be greatly appreciated.

Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.

My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Windows won't recognize my iPod - USB device not recognized

This is really frustrating. So I got a 4gb iPod nano on Saturday, took it home, set it up and everything was going just fine, no worry's. About 4 hours later I went to adjust my songs and it would not come up in iTunes. A little pop-up box said that the "USB device not recognized - one of the USB devices attached to this computer has malfunctioned and windows does not recognize it." After owning my iPod for less than an afternoon, I now have an ipod that I can do nothing to including change the music, charge it, etc. It works normally otherwise, it just won't connect to my computer. I then plugged in my older 256mb usb stick, and the same message, it too does not get recognized by windows. So I then tried a brand new 1gb usb stick that I had and the same result, not recognized by windows. I updated my itunes to the latest one after purchasing my ipod (version 7.4.3.1) and have looked up everything that I can and tried everything I saw to try, but nothing, absolutely nothing, worked. However my usb mouse, usb joystick, and usb printer all still work, but my moniter that has four usb outlets on it causes the same message, if I plug in the cable that connects one usb on my computer to the four on my moniter, windows can not recognize it. When I look in my device manager at the "unknown device" under the usb controller list it says that there is not driver for it, however I know that the drivers are either on my computer or built into windows. Any help? Anybody have an idea about what to do? Is it something in my windows registry has changed because of the new itunes, etc.?

Now that I've had some sleep, I realise I didn't really provide information that may lead to some specific help. Here goes - when I first plugged in the ipod nano (8gb), It displayed the screen it was supposed to - I could see the lightning bolt through the battery icon and knew it was charging. The icon for the ipod also appeared in the left-hand listing in itunes (in the section that existed under Library, before the sections Store and Playlists). This section now does not appear (I can't remember the title of this section, but it might have been 'devices'). In fact, I'm pretty sure this problem started when I clicked on this icon - nothing happened and it disappeared - so did the display on the ipod, which is not just the apple. This means itunes has only Library, Store and Playlist in the left-hand colunm. While I accept that computers do not work on normal logic, this seems to me to indicate that the drivers are fine, the system is fine, my laptop is fine - its the ipod or the usb cord. This morning as I tried again, this time my laptop gave me the option to 'click on the balloon to solve the problem' - let me quote: "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. Try reconnecting the device. If Windows still does not recognise it, replace the device". Come on folks - one of you will surely know how to fix this (short of me taking the ipod back to the store to get my money back).

"USB Device Not Recognized" in Windows XP

Hello, When i plug my ipod touch into my laptop which has Windows XP, it comes up as USB Device Not Recognized. I have no idea what to do please HELP ME!!!!!!

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

Work through all the suggestions in this Apple support document first.
iPod: Does not appear in Windows or iTunes and Device Manager is empty
B-rock

USB Device Not Recognized - Windows XP

The IPOD 5G and my computer were working just fine until the computer stopped detecting the IPOD. I get this message:
USB Device not Recognized. The USB device attached to this computer has malfuctioned and Windows does not recognize itit. Try reconnecting the divice(ipod) If Windows still does not recognize it, replace the device."
IPOD still works and is recognized by my work laptop. What driver needs to be installed for the ipod to be recongized?
Help me
Windows XP

Someone here said that you need two drivers usbstor.sys and usbstor.inf I found them at driverguide.com. I have not tried to load them yet but I will probply tommorrow.My coumputer will not see ipod as a hard drive, it loads video fine and all my music but no pics.

Nokia e65, USB device not recognized using windows...

Hello,
When I am trying to connect e65 to pc I always get "USB device not recognized". I tried to reinstall nokia pc suite, after that I've restarted phone and PC but it doesn't help. I tried to install older nokia pc suite versions and it doesn't help too. I'am using CA-53 cable.
P.S. I tried to reinstall only Nokia Connectivity Cable Driver but nothing happened..
Maybe someone has a solution for this?

@techvitalie
Is it only as Windows USB mass storage device that it is not recognised by PC or same issue if connected in PC Suite mode with PCSuite/Ovi Suite installed?
Happy to have helped forum with a Support Ratio = 42.5

USB Device Not Recognized - USB device attached has malfunctioned & Windows does not recognize it

I have an HP Pavilion dv4 Notebook running Windows 7 Home Premium and the USB ports worked fine for an HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB Device Not Recognized" and also indicated that the device attached to the computer has malfunctioned. This prompted me to buy a new Canon digital camera. Well, a new camera did not fix the problem. Now, anything connected to either of the 2 USB ports will not be recognized by my laptop. Help! I'm at a loss to figure this out. I've tried the suggested Microsoft help below:
Suggestion 1: For the issue with USB devices, uninstall and re-install all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition.
The USB controllers represent the USB ports in Device Manager.
a. Click Start, type device manager in the Start search box and hit Enter.
b. Expand Universal Serial Bus controllers.
Note: You might have to scroll down the list to find this item.
c. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
f. Check the USB device to see whether it is working.
This did not correct the problem. Then from device manager, I tried updating drivers on all the USB controllers and root hubs. While some may have received downloaded software updates, it still did not correct the USB device not recognized problem after restarting the computer. I'm hoping someone knows of the fix to this situation and can pass it along to me. Thanks for reading and posting any help.
This question was solved.
View Solution.

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

Running Windows 7 via Bootcamp - USB Device Not recognized.

I am running Windows 7 64 bit via Bootcamp on my MacBook Pro (2012 non-retina display). USB devices are not being recognized within Windows 7 (USB Device Not Recognized error).
I have done some research and tried a few possible solutions but nothing has worked so far. Here is what I have tried:
- Uninstalling all USB drivers within windows and then restarting to let Windows re-install the drivers.
- Uninstalling Intel 3.0 USB Host Contoller and restarting Windows.
- Repairing the drivers using Bootcamp setup.
- Uninstalling bootcamp and re-installing bootcamp services.
The USB drives are working fine within OS X, just having issues in Windows.
Any suggestions?
Thanks in advance.

3.0 is on your OS X DVD. Clearly spelled out in the guide in Boot Camp Assistant, and here -
www.apple.com/support/bootcamp : manuals, look for 10.6 pdf version.
3.0 is pre-requisite for any other
OS X comes with Boot Camp Assistant and you access 3.0 drivers while in Windows.

Windows 7 says "USB Device not recognized"

Hi!
I have the 64-bit version of Windows 7 and 64-bit iTunes installed. My iPod Photo 40GB won't work with that computer, but works fine with my old XP 32-bit computer.
Is there any way to solve this problem? When I plug in the iPod, it says "Installing driver" for a short time, then says "USB device not recognized". I uninstalled and reinstalled the driver several times, tried to force W7 to install drivers from "iPod Updater 2005-01-11" and also used Windows update.
Are there any 64-bit drivers available? I really need to put some music on the iPod now!!

Have you tried the suggestions here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Hi Any time i plug mt iphone 4 in i get message usb device not recognized what can i do to fix this i am runnung Windows 7 and my phone is dead

Hi, whenever I try to plug in my iphone to a computer it says, "USB DEVICE NOT RECOGNIZED". I just want my phone to charge because it is dead. Ive tried to charge on my xbox, nothing. Tried a different charger, nothing.

Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.

Ipod not recognised by Windows, USB device not recognised

Hi hope someone can help
I have recently received my ipod back from Applecare who have sent the ipod back in ' working order ' but it will no longer be recognised by my windows. It says USB device not recognised and i cant find, nor will it install drivers that i located on the ipod updater etc.
I have tried several methods on this forum but none seem to work.
The letter from mycare says the iPod is formatted for a computer operating Mac OS X. Although i stated wi use Windows. But the leter states this can be changed bu installing the updater, but this wont make a diff as comp still wont regonise the device after i have followed there instructions. Any advice?
Thanks

I'm not really up on the complexities of the Windows OS but try this tip I picked up a while back, hopefully it might help.
"USB Device not Recognized in Windows".
1. On the Start menu, click Control Panel.
2. Double-click the System icon.
3. Click the Hardware tab.
4. Click Device Manager.
5. Scroll down the list of devices to the Universal Serial Bus controllers
6. Click the plus icon next to the Universal Serial Bus controllers.
7. Double-click one of the indented USB Root Hub entries.
8. Click the Power Management tab.
9. Deselect the "Allow the computer to turn off this device to save power" option.
10. Click the OK button at the bottom of the window.
11. Restart the computer.

5250 - Windows : USB Device not recognized

Similar Messages

Maybe you are looking for