5300 and mp4 problem

I converted a dvd to mp4 format. I put it on my cell and I can get the audio but no video. Anyone have any clue why??
Thanks
PF

what soft did you use to create the mp4? and what profile MPEG4 did you use?
There's so many MPEG4 variants around, that it's quite hard to ensure compatibility... I've seen that 5300 is supposedly mpeg4 compatible, but detailed info on that from Nokia would be helpful.
My Nokia history: 5310 (Sep 2008), 5300 (Jan 2007), 6610 (June 2003), 3310 (2001)

Similar Messages

Another 5300 and mp4 problem w/ Nokia response

Hi,
With the help of a friend, I've tried several mp4 videos on my 5300, and all of them (encoded with different programs) have a sync problem between the video and the audio (audio is delayed). Since we used several encoders, we assume the problem's with the phone's decoder.
I wrote to Nokia Portugal, letting them know of this, and the several steps we took, etc. They replied stating that the 5300 doesn't support mp4 files... so I replied to them with this link:
http://forum.nokia.com/devices/5300 and even pasting into the e-mail the relevant bit of that page, where it states the 5300 reads those files (how else would it even show the video, even if there's the sync problem). Sooooo... they wrote to me again, stating once more that the 5300 isn't compatible with the mp4... hilarious, and sad.
I'm thinking of either contacting Nokia in Finland or (most likely to start with) going to a Nokia store here in Lisbon and talking to them about it.
Just wanted to share

hi... FWIW, I tried 2 things this afternoon. Nero Recode and the Nokia Multimedia viewer (part of PCSuite).
Nero Recode -> Profile Portable AVC, res 176x144, video bitrate 127 kbps. Bad sync. Video playback slow
Nokia MM -> 176x144 mp4. Good sync. Poorer video quality than the file produced by Nero.
With the video res limited to 176x144, and given that it takes nearly an hour to recode an hour's worth of video, I doubt anything is worth watching on the phone. At least not TV series or so... maybe a talkshow yeah...
My Nokia history: 5310 (Sep 2008), 5300 (Jan 2007), 6610 (June 2003), 3310 (2001)

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?
I created project in iMovie then exported it to MP4 and also MOV file at highest definition possible + I added it to iDVD and had a number issues about encoding errors regarding the mp4 file. MOV worked but the quality was terrible.....
MOV file is as follows:
4.08GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1920 x 1080
Duration: 12:33
Audio Channels: 2
MP4 File is as follows:
3.02GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1280 x 720
Duration: 12:33
Audio Channels: 6
I have a MacBook Pro using the Yosemite system upgrade.
I have updated iDVD and iMovie.
I even bought the iSkysoft app from the mac store and that was terrible too.
PLEASE HELP i am getting desperate and about to launch this macbook into the air
2.66 GHz Intel Core i7
Version 10.10. 2

First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug

Query: MacOS 10.5.3 update, Quicktime and mp4

Hi, this maybe a 'stupid' question but I'll ask anyway.
Earlier this 2008 I recall the Quicktime 7.4 update having problems playing mp4 files, and I ended up downgrading back to Quicktime 7.2 (using Pacifist) to solve my problem. Ever since then, I've been reluctant to apply successive Leopard OS X system updates for fear of Quicktime 7.2 being upgraded again, and so running into mp4 problems again. My question is: with Apple's most recent 10.5.3 update, I assume it updates Quicktime (to what version?) and is it OK with mp4 files?
Fox27!

Ahhh! Thank you, Fox!
PS: error in original post: I'm using QuickTime 7.3.1 (not 7.2)
Message was edited by: fox27
Message was edited by: fox27

8330 limited to .3gp and .mp4 for video

It seems to be a well kept secret that the BlackBerry Curve 8330 only supports video formats .3gp and .mp4 Simple Profile (SP). There have been many forum queries on this subject. In many cases the person asking has the 8330 and wants to work with .avi files. The responders often assume .avi will work (since it does with all other Curves) and ends up pointing them down a dead end street. I also notice that most of the forum queries never finish with a resolution.
This limitation puts a real damper on my ability to capture video with the 8330 Curve Video Camera and send it to friends and family. Many of whom are novices at computers. Requiring them to figure out how to watch a .3gp file is just wrong. .3gp is the only format in which the Curve Video Camera captures, so when you email it, that is what they get.
Also, many of the recommended programs such as BlackBerry Video Converter do not work since the output produces .avi files. So far, I have struck out completely putting any format of video on the 8330 with BlackBerry Desktop Manager and actually getting it to work.
I know VLC and Quicktime will play captured 8330 videos (.3gp format). But how many novice computer users have VLC or Quicktime? And why should they be required to obtain them when Windows comes with Windows Media Player?
Can someone explain why the 8330 only supports .3gp and mp4 (limited to mpeg-4 SP (Simple Profile)) when the other Curves (8300, 8310, 8320, 8350i) all support .mp4, m4a, .mov, .3gp, .avi, and .wmv?
Jim

Hi niteshkumar482,
Welcome to the Nokia forums!
It plays wmv audio, and mp4 format is just a container. Different mp4 videos may have differing audio and video stream configurations, some may play, some may not.
As for the MP3, did you perform a hard reset on your device?
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

CC2014.1 Vers8.1 Caravan crashes every time i try to play or drop a clip on a timeline ( .mov and .mp4 )

I've just moved to CC today, I have used CS5 for the last few years.
After importing my footage and arranging in bins, every time i try t even play a lip or drop one onto a timeline the program crashes.
It won't even play the clip in the small preview window, but it does give me a preview frame.
Audio opens up fine and plays fine and drops to timeline fine, however it splits the clips into L+R, is there a way to stop that as it happens even on a mono track?
I'm sure it's something silly with setting i haven't done or something but can anyone help?
Happens on .mov and .mp4 files.
Even if i bring in an old project from CS5 it will allow me and the timelines look fine, but if i try to replace a clip from the project folder to the timeline it crashes!
CC2014.1 Vers8.1 Caravan
Running on laptop today, pc is in for a new SSD. Footage is on a UBB external drive
Windows 7
Intel i7-4700 mq cpu @2.4
8 GB Ram
Programs on SSD Drive C
Cache set to be on Drive E
If anyone has any ideas I'd appreciate it, i knew I'd have a learning curve but i didn't forsee this basic problem.
Thanks.

Hi Ronan,
Great! it worked.
You can check the link below which highlights the optimization process.
http://blogs.adobe.com/aftereffects/2011/02/optimizing-for-performance-adobe-premiere-pro- and-after-effects.html
Regards,
Vinay

Export issue with avi and mp4

With cs6 I had no problem exporting a avi and mp4 project but now with CC i cannot mix the two and avi will not export on their own? I also always get this message.
Error compiling movie.
Unknown error.

-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-and nested sequences http://forums.adobe.com/thread/955172

Premiere on a Mac? mpg2 and mp4?

I have Premiere CS4 on a intel macmini and it sucks. I can only export as quicktime, mpg2 and mp4. None of these work corectly on my mac. First there is no HD format for the quicktime so I have to choose from mp4 or mpg2. But macs don't come with a mpg2 codec so I try mp4 wich is what I want anyway but guess what. The play back is terrible no matter what I try, it always stutters and plays choppy.
Why can't I export a clean mp4? Doesn't Adobe test and develop for these problems?
Does anybody know? Does anybody use adobe premiere on a mac or is it completey useless to mac users?

on a intel macmini and it sucks.
I agree. Here's the solution.

Converting between .mkv .mov and .mp4

I have been given some h264 video files in .mkv format and am able to convert these to .mov by resaving them out to .mov from QuickTime Player 7.
I can change the file extension in Finder to .mp4 and they seem to then more or less behave as .mp4 files.
Are they actually .mp4, or QT doesn't care and just opens them anyway?
What is the best method of handling these files for widest usage on multiple devices?
I have read up as much as I can on the file formats but no-where does it say what OSX is actually doing when I change the extension.
Am I right in wanting them to be .mp4 files?
Peter

I didn't state the audio format(s) because it has rarely been an issue, if it fails it fails at the first hurdle. The container.
Non-AAC audio will likely fail to load/play if the MKV Extension is changed at the Finder Level. Using MPEG Streamclip to move the compressed data to a "real" MP4 file container will normally strip the audio from the final file. If you wish to retain the audio, use the QT 7 Pro "Movie to MPEG-4" option, use video passthrough, and transcode the audio to AAC.
Most of the .mkv files have aac audio, but not all. Chapters are irrelevant, never having found any nor thought them useful.
This is a user preference. I prefer to keep the original chapter markers for apps that use them rather than falling back on the defaulted markers added by some device players.
I am playing the files on several Macs, 2 PCs, an iPhone, iPod Touch, iPad 2 and possibly future Android devices. There are even 2 TVs which seem to be stuck with only reading avi.
Macs, iPhones, iPod Touch, and iPad will play H.264/AAC compressed data natively in MOV, MP4, or M4v file containers. PCs and Android playback will depend on the compatibility of the player app used on the device. Macs will play H.264 with any audio supported by your Mac codec component configuration in the MOV file container.
My main target however is a PS3, which has turned out to be the most flexible media device in the house but does object to some files for indeterminant reasons. I will need to do comprehensive testing to find exactly what it is it doesn't like. Mostly it is good, once you update the system.
Do not own a PS3 but believe it is supossed to be compatible iTunes and mobile device supported formats. Again, the file container of choice would depend on the content you wish to include in the file. If you want to include AC3 DD5.1 sourround soud audio, I would normally recommend the MV4 or MOV containers.
The secondary target is iTunes so that I can get the files onto my iPod Touch and iPhone. I'm sort of used to that level of Apple devices (and I presume AppleTV) "Just not working" unless it suits Apple. So I restrict my viewing to mp4 files of my own creation or mkv files so over the top in size that recompression does little to degrade them.
Again, the M4V file container with H.264/AAC with or without AC3 surround audio, alternative AAC audio, and/or chapters is usually the preferred norm. If you plan to use a "universal" file format, then the display dimensions, frame rate, profile, and level for encodes may depend on the specific devices involved. I.e., that is why I limit my files to 720p30 Main Profile Level 3.1 to High Profile Level 4.0 compression and rarely use even half (more commonly only about a quarter to a third) of the video data rates allowed with these settings.
XBMC and other Media Server software seem, like VLC to be pretty tolerant, and whilst I haven't yet built myself a Media Server, it is on my longer term To-Do list.
I use iTunes for in-house media server software to TV and mobile devices with Air Video as my primary server software externally via the internet to mobile devices when away from home. Both access the same Promise Pegasus R6 12 TB RAID storage device. (Have moved most of my content from an old Drobo Pro RAID and am in the process of upgrading the current 16 TB unit to 24 TBs as individual drives fail for the storage of raw video footage.)
The h264 should pass straight through in a simple QT resave? Same if it has AAC audio?
If the source MKV file is playback compatible with your system's current codec component configuration, then the QT 7 Pro or MPEG Streamclip "Save As..." option can copy the data in the MKV file directly to a new MOV file container without transcoding/recompressing any of the data. Unfortunately, the QT X player is a bit more iffy. Basically, Apple has combined the "Save, Export, and Save As..." options in to a single menu option. The result is that sometimes the app will recompress the data and at other times it may not—dependent on a numbe of variables.)
If the MKV file contains H.264 video and AAC audio, then the MPEG Streamclip "Save As..." option allows you to select either MOV or MP4 as the target file container. If the MKV file contains H.264 video but the audio is not AAC but is still export-compatible with the QT 7 Pro app, then you can use the QT 7 Pro "Movie to MPEG-4" Export option to pass the H.264 video unchanged to a new MP4 file container while simultaneously coverting the audio to AAC. Since you still have not stated what non-AAC formats are included in some of your MKV files, I cannot tell at this point if this is a viable workflow for you.
That covers most cases. I'm still not a 100% clear on tghe real differences between .mov and .mp4 containers and how much it really matters in the scheme of things. .mp4 seems to the go, does .mov cause a problem? If so how and how best to rectify that?
The containers are different. They have different internal identifiers, features, capabilities, and sometimes limitations. CDs, DVDs, and BDs are all different types of optical media but each has different capacities, ratings, and features that determine how they can be used, what kind of media can be recoded on it, and what kind of a device must be used for playback. MP4 containers are very limited. Thay can only conatain MPEG-4 (MPEG-4/H.264) video and MPEG-4 (AAC) audio. M4V file containers are less limited and may typically contain H.264 video, AAC and/or AC3 audio, and chapter tracks. MOV file containers are generic and can hold up to 99 tracks of audio, video, image, text, 'tween, sprite, etc. data that is compatible with the system on which it was created. As to MOV files causing a problem—yes and no, depending on how you use it. Put "muxed" MPEG-2 data in an MOV file in an MOV file container and it will play normally in the QT 7 player (with the QT MPEG-2 component installed)—i.e., no problem. But try to play the same file in the QT X player and it will tell you that you are missing a codec component—a definite problem since you tried to play playable content in a container the media player did not expect to contain that particular form of compression. As to fixing aproblem. I would be better able to answer that if I knoew what specific problem you were referring to here.
This is why I keep harping about knowing which player is to be used, what audio and video compression format is being used and what container is to be used. And we have not even gotten around to checking the H.264 settings. QT based players are standards conscious. Each Profile and level combination tells the player the max macroblock decoding rate, number of macroblocks allowed per frame, the maximum video data rate allowed, the highest useable resolution @ the highest frame rate, what features are supported by profile, etc. Unfortunately, some third-party venders sometimes hybridize these settings which can make the files unplayable in QT apps but they may still play on other players which do not check on or trap on the use of non-standard settings.
BTW I did a quick hunt around on h265 and can't see what Apple is doing. Giving it a miss like it did with Bluray?
Apple is not known for embracing such technology quickly—especially since they are still drafting and reviewing drafted standards. (I believe DivX released a draft version on the 15th of this month.) The current evolution of QT X will probably take another 5-7 years and Apple will have to design hardware capable of handling 4K and 8K if anyone is actually going to put it to use on future Mac systems. The development of mobile devices have, for the most part, only been supporting 1080p resolutions for a relatively short period and jumping to 8K would represent something of a quantum leap at the consumer level.

Need nokia x2-01 3gp and mp4 player

hi........ Frnds. I have x2-01 phone with latest verision software 8.7 . My media player is not working or unable to open mp3 or videos. I reset it. But theproblem still continue.plz give me video player or mp3 player link for x2-01. Plz help me

Hi niteshkumar482,
Welcome to the Nokia forums!
It plays wmv audio, and mp4 format is just a container. Different mp4 videos may have differing audio and video stream configurations, some may play, some may not.
As for the MP3, did you perform a hard reset on your device?
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Nokia 5300 - Power Saver Problems

Hi!
I have a 5300 and sometimes my Power Saver mode does not work.
I'm sorry but I coudn't figure out the problem reprodution steps yet. All I can tell is that from a certain point beyond the power saver does not appear although it is activated. One way to correct this is to turn the phone off then on.
Is Nokia aware of this problem?
I found a similar post about another model, the suggested explanation resided on the operator's firmware, but in 5300's case the firmware is Nokia original...
Thank's.

I also tried formatting my memory card... that did not worrk either

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

BOSD, Battery issues and Heating problem after iOS 8 upgrade

i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

I am making code to try to make a game and my problem is that my code......

I am making code to try to make a game and my problem is that my code
will not let it change the hit everytime so im getting the first guy to hit 1 then next hits 8 and so on and always repeats.
Another problem is that I would like it to attack with out me telling it how much times to attack. I am using Object oriented programming.
Here is the code for my objects:
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class rockCrab {
     //Wounding formula
     double sL = 70;                                   // my Strength Level
     double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
     double aB = 0;                                 // equipment stats
     double eS = (sL * bP) + 3;                         // effective strength
     double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
     //Attack formula
     double aL = 50;                                   // my Attack Level
     double eD = 1;                                   // enemy's Defence
     double eA = aL / eD;                              // effective Attack
     double eB = 0;                                   // equipment bonus'
     double bA = ((eA/10) * (eB/10));                    // base attack
     //The hit formula
     double fA = random() * bA;
     double fH = random() * bD;
     double done = rint(fH - fA);
     //health formula
     double health = floor(10 + sL/10 * aL/10);
     rockCrab() {
     void attack() {
          health = floor(10 + sL/10 * aL/10);
          double done = rint(fH - fA);
          fA = random() * bA;
          fH = random() * bD;
          done = rint(fH - fA);
          System.out.println("Rockcrab hit" +done);
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class self {
     //Wounding formula
     double sL = 1;                                   // my Strength Level
     double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
     double aB = 0;                                 // equipment stats
     double eS = (sL * bP) + 3;                         // effective strength
     double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
     //Attack formula
     double aL = 1;                                   // my Attack Level
     double eD = 1;                                   // enemy's Defence
     double eA = aL / eD;                              // effective Attack
     double eB = 0;                                   // equipment bonus'
     double bA = ((eA/10) * (eB/10));                    // base attack
     //The hit formula
     double fA = random() * bA;
     double fH = random() * bD;
     double done = rint(fH - fA);
     //health formula
     double health = floor(10 + sL/10 * aL/10);
     self() {
     void attack() {
          health = floor(10 + sL/10 * aL/10);
          fA = random() * bA;
          fH = random() * bD;
          done = rint(fH - fA);
          System.out.println("You hit" +done);
}Here is the main code that writes what the objects do:
class fight {
     public static void main(String[] args) {
          self instance1 = new self();
          rockCrab instance2 = new rockCrab();
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
}when the code is run it says something like this:
you hit 1
RockCrabs health is 9
RockCrab hit 7
your health is 38
you hit 1
RockCrabs health is 8
RockCrab hit 7
your health is 31
you hit 1
RockCrabs health is 7
RockCrab hit 7
your health is 24
you hit 1
RockCrabs health is 6
RockCrab hit 7
your health is 17
my point is whatever some one hits it always repeats that
my expected output would have to be something like
you hit 1
RockCrabs health is 9
RockCrab hit 9
your health is 37
you hit 3
RockCrabs health is 6
RockCrab hit 4
your health is 33
you hit 2
RockCrabs health is 4
RockCrab hit 7
your health is 26
you hit 3
RockCrabs health is 1
RockCrab hit 6
your health is 20
Edited by: rade134 on Jun 4, 2009 10:58 AM

[_Crosspost_|http://forums.sun.com/thread.jspa?threadID=5390217] I'm locking.

5300 and mp4 problem

Similar Messages

Maybe you are looking for