5300 Does not vibrate after Software update
Hi,
I just updated the sofware on my nokia 5300 with the v5.0 using the PC updater. Since then the phone does not vibrate! i have tried several different profiles and still it will not vibrate. Even there is no that minute vibrate when switching off the phone. What could be causing this?
Tried restoring factory settings with no luck.
Ed
This may sound very obvious but have you gone into each profile to specifically switch the Vibrate Option on ?
If you highlight a ptofile, and then click Personalize you should see the option to enable Vibrate in there.
Regards,
Edward
Similar Messages
-
Scanner samsung scx-4300 does not work after software update v 2.3
hi everybody,
i just noticed that after i run software update on my mac mini and install samsung printer software update v2.3
I'm no longer able to scan from my Samsung SCX-4300
on macbook pro i noticed the software update has not been installed, and i can still scan without any problem
is there a way to uninstall the software update?
thanks.What's the correct way to uninstall SamsungPrinterSoftwareUpdate v.2.3
If I delete the following:
- Samsung folder in /Libraries/Printers/
- Samsung Scanner.app in /Library/Image Capture/Devices
Will it remove samsung driver for printer and scanner?
If yes, then I can reinstall SamsungPrinterSoftwareUpdate v2.2 (found in on the internet from google search)
note: confirmed the problem is with SamsungPrinterSoftwareUpdate v2.3 -
HT1338 Mail does not open after software update?
My MacBook just updated with OSX 10.6.8 buildK549. Now my Mail does not open. I get a message that the mail version 4.5 1084/1065 is not compatible with the OSX. There was a new mail icon in the apps file but it did not open. Any suggestions?
How do I reinsatll Mail?
ThanksIt's giving you that message because the update changed Mail from version 4.5 to 4.6 and it's seeing the 4.5. The part of the update that was meant for Mail failed because it couldn't find Mail where it was looking for it.
See
https://discussions.apple.com/thread/4311280?tstart=0 -
MAIL DOES NOT OPEN AFTER SOFTWARE UPDATE
Computer - software updates are available - clicked ok
Computer - restart - said yes
Mail now has ffg msg - YOU CANT USE THIS VERSION OF MAIL WITH THIS VERSION OF MAC OS X
You tried to open Mail version 4.5 (1084/1085) in
It can’t be used on this version of Mac OS X. Try opening the version of Mail located in the Applications folder on your computer. For more information, click the Help button.
HAVE MAC VERSION 10.6.8I was posting a different work-around until Apple came out with the official article:
Open a Finder window and "Find" like the screenshot: By filename for Mail.app
Track down and discard any old versions of Mail you find. They don't work anyway.
Then do these two steps:
* Run the Mac OS X 10.6.8 Update Combo 1.1.http://support.apple.com/kb/DL1399
* Run the Security update.http://support.apple.com/kb/DL1586
--identified by Barney15E and Jreporter -
Apple TV does not work after software update
After being prompted and loading (I think) the newest ATV update all I have on my TV screen is the iTunes icon and underneath that an icon of a USB cable icon. When the power is plugged in the ATV status light blinks continuously. Please not my home share is turned on. What can be done to troubleshoot and solve this problem?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
1. Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
2. Connect the micro USB cable to the Apple TV and to your computer.
3. Reconnect the power cable (only for Apple TV 3)
4. Open iTunes.
5. Select your Apple TV in the Devices list, and then click Restore. -
How do i update 10.5.8 if my macbook does not show any software updates?
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Iphone could not activate after software update
iphone could not activate after software update (iSO5). it reads, on itunes, "there is no sim card on the iphone", even though there is one in the phone. i tried taking the sim out and re-inserting it, but the same problem still repeats. Anyone to help?
Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier? -
my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipad does not have the software update as an option. Is there any other way to update the operating system? Thank you
Your tag line shows iOS 6. If you are running iOS 6 you should have it in the settings. Your tag line also shows iPad - so if you have the iPad 1 - you can only update to iOS 5.1.1 and you need a computer running iTunes.
So if You do not have iOS 5 on your iPad you have to update by using a computer via the latest version of iTunes. You can connect the iPad to your computer and launch iTunes. Select the iPad on the left side under the devices heading. Click on the Summary Tab on the right. Click on Check for Update.
After you update to iOS 5 or later, you will have Software Update in you settings and can update via WiFi OTA.
How to update to iOS 5 or later.
http://support.apple.com/kb/HT4972 -
HT4623 My iPad does not have a "software update" category.how do I update it?
My iPad does not have a "software update" category in the General section. How do I update it?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you are updating using wifi, locate your iPad close to your router so you don't get a wifi dropout (can cause update corruption).
Cheers, Tom -
Hello, I have an ipad2 with iOS 4.2.7 but am trying to update it to a 5 or so. The problem is that the"settings" environment on my pad does not have the "software update" option. Please what do I do to enable me update my iOS? Any help would be appreciated. Thanks
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks
"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Hi,
I am really struggling to update my iphone software. I believe that I am currently on version 4.2.1 and would like to update yet my general settings menu does not offer a software update option.
What would be the best steps to take?
Any help would be great.
Thanks
TConnect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
how do you update an ipod touch? Mine does not have the software update under the general tab. I would like to back it up to Icloud. Thx
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
To use iCloud you have to have iOS 5 or later. -
HT4623 I have an Iphone 3 that does not have the software updates how can I update it?
I have an IPhone 3 that does not have the software updates in my settings how can I update it cause I can not download any apps or games?
The 3G can not be upgraded beyond 4.2.1, but if the phone isn't there yet, see below.
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848
Maybe you are looking for
-
HFM 11.1.2.3 Configuration - Issue with Consolidation Administration
Hi, This is regarding a new/fresh installation EPM 11.1.2.3 and have an issue with configuration on HFM; the deployment is distributed as below 1) Server 1 : Foundation,WebLogic Admin(/OHS) - Workspace/Shared Services/Planning/Calc Manager/EAS/APS 2)
-
Does anybody have the same problem?
-
How to determine which pictures are in albums?
With 7000 pictures over 10 years, I decided to group some into albums. This I did. I then came back the next day to continue my task and learned that photos are not "moved" into albums but all 7000 remain in the library. Trouble is I do not know whic
-
How to find infinite loop?
Dear Oracle Gurus, I have one (some?) problem and no idea what to do. Our platform is IBM xSeries 234, RHEL3, 10g (version ...0.2). Database has only Oracle Application Repository shemas. Here is output from OS: #ps aux ... oracleandja (LOCAL=NO) -Mo
-
Batch Change Dates in Aperture
I want to batch change hundreds of images in 1 event (or project) in Aperture 3 to be timed apart by the time designation I set forth on the batch process. I have easily done this in iPhoto 8 by selecting all the photos, ctrl-clicking "batch change"