5300 doesn`t display callers number

Hi I`ve just got a Nokia 5300 on an Orange contract and when I receive incoming calls it only displays "call" and not the phone number!!
Any ideas anyone, have been through the menus and can`t seem to find anything to change!!
Cheers

Check the fonebook memory to see if you have activated both fone memory and sim card memory.
Copy all contacts to fone and choose the fone memory option.
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Similar Messages

Outgoing calls doesn't display DID number?

hi all,
Q1.) With refer to belows, I hope the "Calling Party Number i = 0x0081, '33800' " should appear '8883800' ?
Q2.) I hope my mobilephone will display 8883800 instead of just the extension number 33800 as you seen belows.
Any idea how to do that? please advise. thank you very much.
Here's the sample debug isdn q931
*Jul 23 06:09:37.733: ISDN Se1/1:15 Q931: TX -> SETUP pd = 8 callref = 0x03A9
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98382
Exclusive, Channel 2
Display i = 'Spsn IT Regional Helpdesk'
Calling Party Number i = 0x0081, '33800'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '0125667835'
Plan:Unknown, Type:Unknown

In addition to what Greg suggested, you also need to check the option "Use ext. ph number mask " option under route patterns or under each individual route list - > set the Ext ph number mask to On.
You can find detailed steps here.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmcfg/index.htm
With CME, you can use dialplan patterns. HEre is a good link
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a7fe1.html
HTh
Sankar
PS: please remember to rate posts!

Rows Per Page doesn't affect the number of records displayed

I just updated from 3.2 to 4.0 this morning. When I change the Rows Per Page value in the action menu the report doesn't change and the number of records displayed stays at 10. The report has ~6000 records. I edited the report attributes and add the rows selector to the IR search bar. This doesn't change the behavior either. I noticed that if I change the rows per page in the action menu then the drop down select list is updated, but the report still doesn't change from 10. I tried paging to the next set of results and it still remains at 10.
Has anyone else experienced this problem?
Tony

Yes, Tony, I've seen this in several versions of APEX. In most cases, simply starting a new session was enough to force APEX to refresh the page and grab the new set of pagination directives. If that doesn't work, please give more info like: what type of report you are doing and what the Pagination values are. Please note the following:
Report Template
Pagination Scheme
Enable Partial Page Refresh
Display Position
Number of Rows/Number of Rows Item
Maximum Row Count

My Skype number doesn't display on the phone of pe...

I purchased a Skype number, and I can receive call on that number. However my Skype Number doesn't display on the phone of the people I am calling.

Hi, Julia-T, and welcome to the Community,
Have you seen this library of FAQ articles related to Caller ID?
https://support.skype.com/en/category/CALLER_IDENTIFICATION/
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Nokia N95 not displaying callers name when call co...

Well I guess I'm having problems all around with my new phone
Anyways when I call somebody that I have in the contacts I don't get his/her name in the ballon, it only displays the number and not the name, same thing goes for incomming calls It just won't show the callers name and only shows the number for some reason, I tried re-adding the contacts, deleting them and writing them again but nothing works.
Is there anyone that can help me ?

First in contacts -options-settings check you are using only one memory phone! Not sim or sim and phone memory (several ) Next you need to check you don't have multiple entries, that is to say a number with more than one name attached to it, could be John, John Smith, Smithy, johnnie all with 1234567 as number, but in fact the same person, but the phone doesn't know this so only shows the number, you must use contacts from Phone memory and only have one contact attached to a number for caller id to work (it is fine to have several contact number attached to one contact, but not the other way round), this is a common problem and is always multiple entries, suggest checking your contacts in Ovi Suite is the easiest way to check !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

MSI 970a-g46 motherboard starts up but doesn't display anything.

Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
CPU: AMD Phenom 2 x4 965
GPU: nVidia GeForce 560 GTX
Ram: 8gb Kingston HyperX Fury 1866mhz.
PSU: Corsair 650TX (650 Watts)
Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
I've gone over and checked/tested numerous things:
* The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
* I've tried jumping the CMOS multiple times to no avail.
* I tested the ram on another computer and it worked just fine on that one.
* I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
EDIT: Some other things I did but forgot to mention:
* Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
* Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
* Re-seated GPU multiple times, re-connected cables multiple times.
What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

Quote from: rhradacut on 06-January-15, 16:49:14
What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
Once again thanks for helping out on solving my problem.

JSP doesn't display Oracle varchar2 Items on screen

I recently bought new laptop with windows XP professional with service pack 2. Loaded Oracle 10g Client on it. I have a Dell server with Linux and Oracle database 9i. Accessed the this database through new laptop using SQL plus window and works OK. (With that it is sure that my hosts file updated correct with proper IP address of server and tnsnames.ora files).
I have created a JSP application to access this database. It works perfectly OK in my old laptop with Windows XP home with service pack1. The connections are established through ODBC Data Source Administrator (Control Panel->Administrative Tools->Data Sources) by adding a System Data Source. The application works perfectly OK and displays all fields that I intended and coded for. Only thing is it has Oracle 9i client.
But the same application in the new laptop doesn't work properly. It doesn't display Varchar2 values. It displays only Number and Date data types. This shows it is connecting to the database (oracle 9i). But varchar2 values are not displayed. The connections are established through ODBC Data Source Administrator.
I'm using Tomcat server (jakart-tomcat-5.0.27) on both the laptop. Please help me here.

Suggestion: don't use the ODBC driver to connect to Oracle. I presume you are using sun's JDBC-ODBC bridge?
Oracle have got a reasonably good 100% java JDBC driver which is all you need, and is a lot better than the ODBC bridge. I would recommend using the Oracle thin driver.
Your java code should remain largely unchanged. The only thing you would need to alter would be
1 - driver class being loaded (oracle.jdbc.driver.OracleDriver)
2 - driver url (default would be something like: jdbc:oracle:thin:@127.0.0.1:1521:ORCL)
3 - You would need the oracle jdbc driver in the classpath (ojdbc14.jar) You can find that in [ORA_HOME]/jdbc/lib
If you've written your database connection using a JNDI datasource, then all you would need to change would be the configuration in your tomcat server.
Hope this helps,
evnafets

"0" doesn't display before comma in float numbers...

Hi fellow APEX users,
Have you ever experienced this issue with float numbers in your APEX forms?
When I type float numbers between -1 and 1 in forms (e.g. 0,7 or -0,2), and after having submitted the form then reloaded it for editing, "0" doesn't display before the comma.
For example I got:
*,7* instead of *0,7*
-,2 instead of -0,2
etc.
If I look in SQL Workshop, I see the same (no "0") but I'm pretty sure that the value is properly recorded in the database.
The thing is that it's not very nice for the end users, as they can think the value is wrong.
Does anybody have a solution to display proper float numbers with "0" in the forms?
For info I use the NUMBER type.
Any help much appreciated!
Thanks,
Romain.
Edited by: romain.apex on Feb 5, 2012 8:30 PM

Hi Peter!
Of what type is your item? Display as text or do you use the item value for further computations.
If it is only for means of displaying the correctly formatted number, I'd change the item source to a query and would equip the desired column with a to_char function like:
select to_char(str_be_main, 'fm999G999G990D00') from yourtable where ...You could also use a post calculation computation and enforce the format there:
to_char(:P2027_YOUR_ITEM,'fm999G999G990D00')Maybe this helps!
Brgds,
Seb
Edited by: skahlert on 11.02.2011 07:53

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

Data Table doesn't display

Hi,
My dataTable suddenly stopped displaying the values, which was working perfectly fine before.
I have couple of more dataTables in the project which display the values perfectly.
The dataTable is bound to a rowset, it display the empty rows(which are the equal to the number of row present in the rowset to which dataTable is bound to). It display correct number of rows but with out any text(emptry rows).
I cant understand why? its driving me mad.
I compared the properties of other dataTables which are working with one that doesn't, they are exactly the same except value.
I have even made sure that I haven't set font color to white.
Any help would be greatly appreciated.
Pleaseeeeeeeeeeeee reply ASAP.
cheers
kush

Hi Sharth,
Yes. Its a real weird behaviour.
I haven't done ANY extracoding at all. All I did was bind the table to the rowset and select the table layout.
I am able to bind the table to any rowset. change the table layout,etc...Surprisingly when I run the project, it doesn't show any errors either.
Its driving me mad. I got get this working by tommorow.
any help will greatly appreciated.
cheers
kush

WRT54G version 6 - router setup screen via Internet Explorer 7 doesn't display correctly

Hi,
I've just set up my WRT54G router. I'm able to connect to the internet and I'm able to connect directly to the router via IE but the setup screen doesn't display correctly. I've tried resetting the computer and updating the firmware but it still doesn't display correctly. Almost all of the text is missing except for the Linksys logo and a few drop down menus. Any help/suggestions would be great, thanks.

Hi gang,
There a number of things that you can do to solve this problem but most of them involve changing the rules that you have already configured in your ZoneAlarm profile. My preferred solution is to:
-unplug your router from the WAN (why not?)
-turn off zone alarm
-access your router's administration page at http://192.168.1.1
-find the admin page where you can switch admin access from http to https
--- **save your changes !!**
-reboot your router
-plug the WAN cable back into your router
-turn ZoneAlarm back on
-access your admin page at https://192.168.1.1 ( note the 's')
Bob is your sister's brother! Your admin page should work as it is supposed to. Your router and ZoneAlarm should be playing nicely together. You haven't borked your finely tuned zonealarm rules. You were going to bookmark your admin page anyway, and if you want to allow remote administration, you would want to use https anyway. Nothing is broken and you fixed two things. "Its a good thing."Message Edited by ubuibi on 12-27-200609:10 AM
There are really only 10 kinds of people in the world;
Those who understand binary and those who don't.
ubuibi

Re: my notebook doesn't display the red color

I think I have the same or a similar problem. I have a AMD A4-6210APU with radeon r3 graphics 1.8 ghz running 64 bit windows 8.1.
Since updating the graphics driver last week I have noticed the colour red seems more pink or purple. This is particularly notable as a lot of my buttons and icons contain scartlet as the principle colour. I only purchased the laptop in August so I doubt this is due to a deteriation of the hardware and therefore seems to be an issue with either the display driver or the display settings.
I have attempted to rectify the problem by resetting the display settings to default.
This partidular model does not appear to have any contrast settings built into the controls, therefore I have no way to adjust the colours manually.

Hello @pittstop,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook doesn't display the red color on the screen, and I would be happy to assist you in this matter!
To ensure that your system is installed with the correct graphics software, I recommend installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). Once the software is installed, please update the chipset and graphics drivers Using HP Support Assistant (Windows 8).
I would also encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Ora9i Rpt Dvlpr doesn't display clob in web report

I've got simple table with clob data:
CREATE TABLE TAB_CLOB (
ID NUMBER (12) NOT NULL,
CLASS VARCHAR2 (3) NOT NULL,
CONTENTS CLOB,
with some data.
Using SQL+ with this select:
select * from TABLE_CLOB
finds and displays data in all three columns.
Paper report with the same select formula displays number, char and clob data, but web report displays only number and char data - doesn't display clobs.
Suggestions?

This was an issue with 9.0.2 base release and has been fixed in Reports patches. Please apply Report 9.0.2.0.5 integrated patch for the fix.
thanks
rohit

Contact Doesn't Display During Messages Or Calls

Hi there, recently my friend got a new phone. I added him as a new contact to my phone and the contact remains there ok but the only problem is that when he sends me a txt or rings me, his contact name doesn't display, just his phone number. Why is the phone doing this? and is there any way i can resolve the problem?
thanks!

This problem really really annoys me. It's been there for years in S60 phones. I've just got an N95 8G to replace my E65 and before that I had a 6680. They all do the same stupid thing.
There are loads of reason why you might have someone's number in the contacts more than once.
Perhaps all Nokia developers only know single people, but when you know couples they tend to have separate mobile numbers but the same landline. So the landline is down under both of them. So when they call you from there you don't know who's on the phone. Duh!
Now I understand it can't sensibly show you all the matching names but to show none is dumber that dumb. Show any of the names would be fine. Show the first one entered. Better still when you enter a duplicate show a warning and ask which one to match incoming calls to.
Other reasons to want to have the same number is more than once.
The brain dead voice tag system. I mean, what's the point of being able to add loads of phone numbers for someone but only one of them getting a voice tag. Duh! So if you occasionally have to use a phone in the car you have to enter people in more than once.
Bill Home
Bill Mobile
Bill Work
Bill WhatEver...
Numbers I text a lot I tend to end up giving a short dial like name too as well so they are at the top of the contacts list when you're sending a sms.
I do wish they'd rewrite this damn contacts system else next time I'm likely to look at a different type of phone.

Phone doesn't display contact name - nokia 701

I facing a problem now, i'm using nokia 701, just after repair 2 weeks ago, but now still have this software problem, it doesn't display my contact name, i can't search name anymore, it always display "unnamed", even i have delete all contact and syn back from nokia suite, what shall i do?
mun

the problem lies with your copying of the contacts
When you copied them over you may have added duplicates, if there is a duplicate in the contacts of a number the phone will not display a name as it will be confused.
You will need to go through the contacts and delete any that have duplicate numbers.
This should solve your issue
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

5300 doesn`t display callers number

Similar Messages

Maybe you are looking for