5310 not recognized by computer, PLZ HELP!!

So i was transferring the data with data cable and the next day, it stopped working.. When i connect the cable, mobile recognizes the connection readily but computer shows NOTHING at all, I repeat NOTHING.
I've tried :
- installing latest nokia PC suite
- uninstalling 'PC connectivity solution' and 'nokia connectivity cable driver'
- removing the sim and memory card and connecting the phone, still it does not connect to PC. (Win 7, 32 Bit.. With all the latest updates)
- Gone to settings > Connectivity > USB data cable> PC suite/ data storage/ printing and media
- Tried changing the cable, still nothing
- Strange thing is that one day, it was fine and the next day it stopped working.. PLZ help me!!!!!

Given those information, if you think the issue is with the phone, you can try to do basic troubleshooting steps on the phone:
1. Power cycle. Turn off the phone, remove the battery and turn it back on.
2. Soft reset: This will return the phone back to its default settings. Your personal data such as messages will not be deleted. To do this, dial this code on the phone. *#7780#. The default security code is 12345 unless otherwise changed.
After this, you can try to connect the phone and see if there has been any difference. Keep us posted!

Similar Messages

IPOD NOT RECOGNIZED BY COMPUTER! :'( HELP PLZZ!

when i plug in my ipod the computer detects it as an "unknown device" and apparently the problem is that there is no driver installed for my ipod and its also not detected by my Itunes and updater! T_T helpp plz! its killing me and i've downloaded so many things to help with my usb manager but none of them seem to fully work or even finish downloading. plz help!

go into control panel, then add/remove hardware, then get rid of iTunes, and all versions of Ipod,
The restart, and then reinstall the stuff with the CD that came with ur ipod.... it worked for me... mine was the Ipod intense dfficulties post,..

Recovery Mode not recognized by Itunes PLZ HELP!

My IPhone 5S is in recovery mode but will not be recognized by Itunes? Any suggestion, i cannot simply reset my phone because i put it into Recovery because it was not restoring, the bar didnt move and hasnt moved at all for the past 2:30 hours. It was not being recognised by Itunes in the first place, then on i tried to reset it to factory default which did not work and was stuck. when i try to restart it just goes back to the loading bar which does not move at all. So i put to factory default and would not be recognised by itunes again, i have tried
1) uninstalling and Reinstalling itunes and apple support
2) Yelling at it with frustration in hopes it would work (Which obviously wouldnt work)
3) Restarting the Apple mobile support in the services of the windows pc and checking for updates for the itunes application
4) Updating the drivers for the IPhone in recovery mode but would not find any drivers to update with.
PLEASE HELP if i broke this phone my parents will KILL me. But i'm sure at least one person in the community would have a solution for my problem.
Please help me, my phone is my life! :O

Try placing the iPod in DFU mode and then restore.
Next try another computer
Last make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

DVD Drive not recognized by computer? Help!

Hi everybody,
please take time to read this. I have my laptop for 2 years right now, and it always worked fine. I use this disk of Roller Coaster Tycoon, because I'm still enjoying the game. The game requires the disk to stay inserted every time I want to play it.
All worked fine. Then, one year ago, the drive showed up but the Rollercoaster Tycoon 3 Platinum icon (which would replace the drive, since it's inserted)
DID NOT show up. I tried some things, and I got it fixed with deleting the 'Upperfilters' and 'Lowerfilters' in some place in the system. Rebooted and worked again like a charm.
But THEN, one week ago, the same thing happened. The panda icon was gone and I only saw the DVD station. I tried the SAME thing, but this time it did not work. Upperfilter was there, but after deleting, nothing was fixed. I really
need help, I tried several things but I think only you guys can help me out.
So I suggest that the problem is that the computer cannot recognize any disk I would insert. The disk works on other computers though. So it's definitely not the disk's problem.
Please, I really really need you guys' help.
Sincerely, Boris.

Try this wayne
http://support.microsoft.com/default.aspx/kb/929461/en-us

Ipod not recognized by computer or self

Ipod touch shows the apple screen but will not start, I did the hold power button then hold home button etc didnt work. the apple does stay on screen and flashes here and there but still no changes. Also, is not recognized on computer. Help??

sounds like a currupted iPod if its stuck like that or you Jailbreaked it.

Charging icon appears but not recognized by computer help!!!

Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
What's going on???
HELP!!!!

Have you tried a different cable?
This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
MJ

Wjen i trying to activate my personal file sharing in system 10.4.11 it's not able to start this service so my network computers can't access my computer plz help or advice ??

wjen i trying to activate my personal file sharing in system 10.4.11 it's not able to start this service so my network computers can't access my computer plz help or advice ??

When was the last time you did any of the following?
Restart your computer?
Repaired Permission & restarted your computer?
Run "Repair Disk" from your install DVD?
Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.

Ipod touch not recognized by computer or ITunes

Ipod touch is not recognized by computer or Itunes. Tried it on Windows XP OS and also Windows 7. Error message OxE8000068, unknown error, appears. Thanks for any help!

Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

IPOD Shuffle not recognized by computer, and caused a USB power surge

Device is not recognized by computer, and I tried the listed support recommendations.
The problem originated when I plugged the IPOD shuffle directly into the computer USB ( not using a hub), and this caused a warning window to appear saying unknown device has caused a power surge to this port, and most be removed. Prior to this event, the IPOD shuffle has worked (with direct contact with computer usb or through a powered highspeed usb hub) without issue for nearly 1 year. Any taker's on this issue? Thanks.

Hi JBR,
Go to your control panel and click on Install/Uninstall programs. Scroll down and see if you have multiple versions of the ipod updater installed on your computer. If you do, then uninstall both versions. Reboot your computer.
Next, go to the downloads page and download/install the 1-10-2006 ipod updater. Once installed, go to your start programs and select ipod updater from there. Plug in your ipod and wait a moment. If it's like mine, it'll recognize your ipod and then you can do a "restore" for a clean format.
After that, open itunes and life should be good.
Hope this helps!

Curve not recognized by computer

hello, i baught a blackberry curve on ebay (big mistake!) it functions as phone, but is not recognized by computer. when i plug it in via USB it connects for a second and then stops, i.e. synchronization is not possible.
i reset the device, reinstalled the DM software, spent hours trying to solve this issue nothing works - any help?
btw, under 'manage connecetions', USB does not appear at all.
thank you so much for any input

prior to doing anything, you need to install the USB drivers.
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
after you have checked everything is okay, you can do the next step, that is install the Desktop Manager.
Moreover, ou can wipe your device so that there is no remains from the previous owner.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Capturing through Sony HDV using firewire800 to 400 adaptor is not recognizing can any body help me solve this

I am trying to capture using firewire 800 to 400 adaptor through a Sony HDV VTR. The VTR is not recognizing can some body help me solve this problem.
I am using FCP7 and IMAC with 10.6.8 version os
I dont have a 6 pin or 400 firewire port in the system

Let's start with basics.
Does your computer recognize that there is a VTR attached?
• Open up system profiler>Hardware>FireWire. Does your machine show up?
If no, you need to figure out if the problem lies with the VTR, the cable, the adapter or your computer.
My guess is with the adapter. A number of people have expressed frustration getting fw400 device to work through fw800 ports.
If that's your problem, see if you can find an older Mac w/ fw400 ports or a dedicated fw800 to 400 cable.
good luck,
x
ps - In "locking the barn after the paddle has been lost upstream" mode, this is why non-expandable computers like the iMac are so problematic. A MacBookPro with the expresscard 34 slot or a MacPro with 3 slots can work around these kind of issues. A closed box like the iMac is a dead end. Sorry.

Ipod Nano not recognized by computer (or itunes) but charging.. so connected

worked until this am (though I think I had this once before, a couple years ago, too often follows itunes updates)
connected to computer (win 7) this morning and it is not recognized by computer (or itunes)
can't find it looking in Explorer
but, it is charging so... it is connected
have tried everything except re-installing itunes... if the computer is not seeing it, and it shows the connection when itunes isn't open...
would that make any difference?

diagnostic shows....
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: Y(I removed info)
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
it looks like everything is fine, except it can't find the ipod... why?
when I plug in a thumb drive, it recognizes that, why not the ipod?

I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help

I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .

Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out.

Finder on my mac book pro is not showing the sidebar plz help .i have a mac book pro running on os x lion 10.7.5

finder on my mac book pro is not showing the sidebar plz help .i have a mac book pro running on os x lion 10.7.5

In Finder, Click View, then Show Sidebar - or ALT+CMD+S

I installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

i installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

That message occurs when updating a phone that was hacked to be used with your network. Upgrading the phone has re-locked it to it's rightful carrier. You will need a SIM from the original carrier to proceed.

5310 not recognized by computer, PLZ HELP!!

Similar Messages

Maybe you are looking for