544 Movement ,Qty & value is not getting updated in MC.9

Dear friends,
MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting G in OMJJ.
I require the info about MC.9 configuration or any info related to this.

Hi,
Please refer SAP note 581240 for this.
For these stocks you have three valuation types for selection:
' ' = no inventory valuation
'A' valuation = without reference to sales document ('make-to-stock
inventory')
'M' = separate valuation with reference to the sales and distribution
document/project
ONLY stock/stock movements with special stock valuation 'A'
(make-to-stock inventory) are updated in Inventory Controlling.
Thus, if you find a document which is not updated in the info structures
of Inventory Controlling (S031-S039) and you require this, check the
corresponding documents in the materials management tables. You can find
the special stock indicator and indicator of the valuation of the
special stock, for example, in document segment table MSEG in the
following fields:
MSEG-SOBKZ = Special Stock Indicator
MSEG-KZBWS = Indicator: Special Stock Valuation
Only A type (make to stock ) are updated in the info structures.
Hoping this helps.
Regards,
Rajesh.

Similar Messages

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

Values are not getting updated in sales report

I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
regards,
thooyavan

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

Values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

you have encountered activation lock. Read iCloud: Activation Lock

Value property not getting updated for edit on firefox

Der Sir/Mam,
I am a selenium tester and my test fails on moxila due to following issue,
Value property not getting updated for edit on firefox thats why failing the script while identifying the object from xPath.
The test case run fine on IE.
I want to identify the object by its xPath saying value = "Some value"
I can not check thousands of object by looking in to its value attribute property.
Thanks in advance,
Rohit

I'm not sure whether we can solve your question here. We are mostly supporting the released version of Firefox (Firefox 20) for regular use rather than old versions in a test harness. You might need to reach out to the [https://groups.google.com/forum/?fromgroups#!forum/selenium-users Selenium Users Group] if you can't replicate the problem in Firefox 20.

CRMXIF_ORDER_SAVE: Condition values do not get updated

Hi,
I am trying to change the value of a condition record on a contract using APPL_IDOC_INPUTM (IDOC Type APPL_IDOC_INPUTM; Message Type CRMXIF_ORDER_SAVE_M; Function CRMXIF_ORDER_SAVE). I pass 'U' to the Object_task and populate the new rate in the condition table E101CRMXIF_BT_PRCD_COND. I set the values for the corresponding E101CRMXIF_BT_PRCD_COND_F and E101CRMXIF_PRCD_COND_XT tables too. However, the pricing condition does not get updated on the contract.
Anyone worked on this before and knows the reason or what am I missing?
Thanks
Prayarna

Hey,
Did you solved this? can you please let me know how did you do this?
Regadrs,
Sarath. J

Values are not getting updated(urgent)

Hi,
Iam trying to change the net-price of outline agreement using BAPI_AGREEMENT_MAINTAIN.The code is as follows.Still the price is not getting updated.The function module which im using is the right one or i have to use another one.
data: PO_NUMBER like BAPIMEPOHEADER-PO_NUMBER.
data: PO_HEADER like BAPIMEPOHEADER.
data: PO_ITEM like BAPIMEPOITEM occurs 0 with header line.
data: PO_ITEMX like BAPIMEPOITEMX occurs 0 with header line.
data: RETURN like BAPIRET2 occurs 0 with header line.
*data: PO_NUMBER like BAPIMEPOHEADER-PO_NUMBER.
data: IM_AGREEMENT_HEADER like BAPIOAHEAD occurs 0 with header line.
data: IM_AGREEMENT_HEADER_X like BAPIOAHEAX occurs 0 with header line.
data: IM_AGREEMENT_ITEMS like BAPIOAITEM occurs 0 with header line.
data: IM_AGREEMENT_ITEMS_X like BAPIOAITEX occurs 0 with header line.
data : i_ekko like ekko occurs 0 with header line.
SELECT * FROM ekko into table i_ekko WHERE ebeln = '4600000633'.
*endselect.
IM_AGREEMENT_HEADER-AGMT_NO = i_ekko-ebeln.
IM_AGREEMENT_HEADER-LANGU = i_ekko-SPRAS. "Language
IM_AGREEMENT_HEADER-VAT_CNTRY = i_ekko-STCEG_L. "country id code
IM_AGREEMENT_HEADER-CURRENCY = i_ekko-WAERS. "currency
IM_AGREEMENT_HEADER-DOC_CAT = i_ekko-bstyp. "Pur doc categary
IM_AGREEMENT_HEADER-DOC_TYPE = i_ekko-bsart. "Pur doc type
IM_AGREEMENT_HEADER-TELEPHONE = i_ekko-TELF1.
Append IM_AGREEMENT_HEADER.
IM_AGREEMENT_HEADER_X-AGMT_NO = 'X'.
Append IM_AGREEMENT_HEADER_X.
IM_AGREEMENT_ITEMS-AGRMT_ITEM = '10001'.
IM_AGREEMENT_ITEMS-NET_PRICE = '20'.
Append IM_AGREEMENT_ITEMS.
IM_AGREEMENT_ITEMS_X-AGRMT_ITEM = '10001'.
IM_AGREEMENT_ITEMS_X-NET_PRICE = 'X'.
append IM_AGREEMENT_ITEMS_X.
CALL FUNCTION 'BAPI_AGREEMENT_MAINTAIN'
EXPORTING
IM_AGREEMENT_HEADER = IM_AGREEMENT_HEADER
TABLES
EXT_RETURN = RETURN
IMT_AGREEMENT_ITEMS = IM_AGREEMENT_ITEMS
IMT_AGREEMENT_ITEMS_X = IM_AGREEMENT_ITEMS_X.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
LOOP AT RETURN.
WRITE: RETURN-MESSAGE.
ENDLOOP.

Hi,
do like this:
CALL FUNCTION 'BAPI_AGREEMENT_MAINTAIN'
EXPORTING
IM_AGREEMENT_HEADER = IM_AGREEMENT_HEADER
TABLES
EXT_RETURN = RETURN
IMT_AGREEMENT_ITEMS = IM_AGREEMENT_ITEMS
IMT_AGREEMENT_ITEMS_X = IM_AGREEMENT_ITEMS_X.
if sy-subrc = 0.
        read table RETURN
              into lwa_RETURN
          with key type = 'E'.                                " if there is an error message
        if sy-subrc = 0.
   <b>       do error processing or whatever required.</b>
        else.
          call function 'BAPI_TRANSACTION_COMMIT'
            exporting
              wait = 'X'.
          if sy-subrc = 0.
          endif.
endif.
Regards,
Sooness

InputText value is not getting updated in Iterator

Hi All,
We are using jdeveloper 11.1.1.5.
I have having 2 bounded taskflows TF1 and TF2. In TF1 I am having Page1.jspx and in
TF 2 I have Page2.jspx.
I am having 1 page fragment Frag1.jsff inside that I am having 1 textbox and a button. Text box is binded to the iterator "iter1".
In Page1.jspx I have added fragment as a region and also I have added the iterator "iter1" in the bindings of page1.jspx
On page load I am getting the value in the text box after that I am updating the text
box value and on click of button I am trying to get the text box value using
following methods.
(1) Finding the Iterator getting the row and then finding the value as
Row.getAttribute("Name");
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("IName of the Iterator");
Row row = dciter.getRowAtRangeIndex(0);
row.getAttribute("Name of the attribute);
(2) Finding the RichSelectOneChoice component and then getting value
RichSelectOneChoice textbox= jsfUtils.findComponentInRoot("ID of the component");
textbox.getValue();
(3) Using the page definition attribute as :-
+jsfUtils.resolveExpression("#{data.PageDefName.inputtextname.inputValue}");+
Every time I am getting null value. Is there anything I am missing here.
When I applied autosubmit="true" property on the textbox I am getting value from the
1st method.
*Question 1 : - Is it necessary to use autosubmit property on the text box for the values to get updated in Iterator ?*
*Question 2 : - Why I am not able to find the value using 2nd method ?*
*Question 3 : - Is there anything wrong in getting value from page definition using 3rd method?*
Now When on click on button on page1 on some condition, I am navigating it to page2
and there is a button on page2 which invokes the TaskFlow return activity and so
returning back to TF1.
Now again I am clicking on the button on page1 but this time again I am getting value
of the textbox as null using all the methods :(
I have checked various post and tried putting *changeEvent="ppr"* in ur pageDef
against the respective VO entry but still after returning back from TF2 to TF1 values
are lost in the Iterator.
I tried sharing data control with calling taskflow but still I am not getting the
updated values.
Please suggest.
Thanks in advance.
--NavinK

Hi Suresh,
I already have autoSubmit=true for input text and partialSubmit=true for button but still getting the same error.
--Navin K

Excise invoice taxing values are not getting updated

Respected Members
I have created a sales order and and done the billing and while creating of billing it creates excise invoice.
Problem is that billing document and accounting document showing the values of BED and taxes but when we go to tcode j1iin and see the excise invoice ,it is not updating the values of tax there.
There it is showing zeros everywhere in BED AED NCCD etc.
Please help me out to solve the issue as soon as possible.
I have copied the pricing procedure TAXINJ to TAXIND and set the values .
Please tell me where where i have to check the configuration for solving the issues.
Thanks a lot
GIve your suggestions as soon as possible.

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

CPS parameters are not getting updated in SAP

We have recently migrated our SAP and CPs servers, after that we are facing few CPS issues and it is affecting lot of key batch jobs. One typical example is given below.
CPS is supposed to trigger a job DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006 and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g) It is showing as 4-jan-2011, I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
Has anyone faced similar kind of issue. share you experience
Regards,
Ramprasad.

Hi ,
PLease find attached out XBP version
XBP connection pool for SAP system ISU
XMI interface version           : 2.0
Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
Basically what happens is
So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are not used for due date calculation.. CPS just copies the source date-id to target id and similarly for the due date based on the difference
source_id variant date 01-12-2006   due date 02-12-2006 ( Next day)
Target_id Variant date 25-12-2010 due date 26-12-21010 ( Next Day)
I tried changing the Source date id from 01-12-2006 to 24-12-2010.
Source Variant date 24-12-2010   due date 04-01-2011 ( 10 Days)
Target Variant date 25-12-2010 due date 05-01-2011 ( 10 Days)
Regards,
Ram

Cred.lim.used field in FD32 not getting updated

hi All,
I have a scenario where my Cred.lim.used field which is a %age value is not getting updated in fd32
when I go to fd33 for a customer my Credit limit is 1,000,000.00
and Credit exposure is 1,138.28- but the %age is 0.00 %.
any suggestions
thanks,

Hi
Think logically how it will show the credit limit used in percentage just calculate
credit limit used*100/ total credit limit
1,138.28*100
1,000,000.00
will come to 0.11 % so system wont show it will consider only if it is more than 1%
regards

Custom field in BP_PDBGP table not getting updated

Hi,
i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
Any suggestions? is this a standard bug?
Neha

Hi Virendra,
Thanks a lot for your suggestion.
Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
Let me know if you want more details inorder to analyse this problem.
Thanks &Regards,
Neha

Backing bean properties not getting updated

I have an input text in my JSP page and it is component-bound to backing bean. The problem is that when I change value of the InputText in the JSP, the value is not getting updated in the backing bean.
Here is the InputField definition in JSP page.
<h:inputText binding="#{backing_employeeEdit.firstName}"
id="firstName"/>
and here is the setter in backing bean
public void setFirstName(HtmlInputText inputText1) {
this.firstName = inputText1;
Pls note that there is no validation errors because the page navigates successfully. The only problem is that new value is not updated.

I don't know, wht exactly u wants to do... Here is java code and is working fine for me...
Emp.java
public void action() {
     System.out.println(inputText.getValue());
     Emp tt = new Emp();
     inputText.setValue(inputText.getValue().toString()+"bilal");
     tt.setInputText(inputText);
     System.out.println(inputText.getValue());
JSP...
<f:view>
<h:form>
<h:inputText binding="#{emp.inputText}" />
<h:commandButton value="submit" action="#{emp.action}" />
</h:form>
</f:view>
faces-config file contents....
<managed-bean>
          <managed-bean-name>emp</managed-bean-name>
          <managed-bean-class>
               com.nous.application.Emp
          </managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
Here scope has to be session, otherwise u will lose old value...

SystemWideClassABPWP in RZ20 not getting updated

Hi All,
We need some help from you.
We have shortlisted the monitoring contexts in RZ20 around which we would like to configure our alerts in the system.
But just one concern, here in the monitoring tree under the monitoring tree Background, we have shortlisted SystemWideClassABPWP which tell the System Wide Class A Background Work Process across the instances.
But, we noticed that the value for this particular parameter is not getting updated (value 5 in the below screenshot).
The SystemWideClassABPWP and SystemWideTotalBPWP show inactive. This also seems to be non-modifiable (as per the legend in rz20)
Any clue as to how to activate them and update them with the latest value.
Thanks in advance and any pointers would be appreciated.
Warm Regards
Rajeet

Hi Michael,
Thanks a lot for your reply. But we find that these parameters are not getting updated and so we do not see the log like Green 06.03.2008 , 20:03:31 besides them (for other )
One more thing is we have 2 application servers (1 central instance & other application instance) with each having 5 work process for A priority jobs and 20 work processes for other jobs. So these parameters should show the values as
SystemWideClassABPWP - 10
SystemWideTotalBPWP - 40
But this is not the case. Also, when the operation mode changes these values are not getting updated.
Request your kind help in this regard.
Warm regards,
Rajeet

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

544 Movement ,Qty & value is not getting updated in MC.9

Similar Messages

Maybe you are looking for