5500-ac change the logging level from info to warnings

We have 4 Cisco Systems AIR-PWR-5500-AC’s in our network with logging set to default of informational. This level of logging generates a lot of noise. I need to change the logging level from info to warnings, but cannot do so until I have a table that shows what messages will be excluded if I make this change.

Hi,
This should help you -
https://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part2
Link below gives the in-depth of what you need/should do for ADF Logger -
http://docs.oracle.com/cd/E15586_01/web.1111/b31974/web_testdebug.htm#BABDBCGF
Thanks
Sachin

Similar Messages

  • Changing  the Log level to report level

    hi
    how to change the log level from admin level to report level so that if any reports fail sto excute we can have error information .
    Thanks in Advance

    Hi Marcus,
    once again to clarify: I know it from oracle: Is it right that , If I activate in SAP DB "Owerwrite mode is. ON" no new logfiles will be created.
    Only the existing logfiles will be overwrtiten.
    It means I "save" space, because no new log files a 4,5 GB will be created, is not?
    I am not familiar with SAP DB.
    How should I proceed with Backup (online, offlne)?
    Thank you
    regards

  • How can I change the log level of Sun Clsuter software?

    Hello,
    Now we have a problem about Sun Cluster.
    But we cannot isolate the cause.
    So we'd like to raise the log level of the cluster software.
    I think we can do it.
    I'm soory that we don't have any manuals about SUN here
    And this is an aregent issue
    Please let me know how to change the log level.
    Thanks in advance.
    Masaharu Nakashima.

    I am not sure I understand your question fully. Are you referring to SC2.2?
    The man pages of the sun cluster commands is included in the product. You may want to look into those for any command line options.
    Set your MANPATH environment variable to /opt/SUNWcluster/man.
    Thanks
    Sujeet

  • Using Oracle 11g How to change the Log mode from NoArchieve to Archieve Log

    Hi,
    I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
    And where exactly the spfile will be located?
    My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
    In this path i found 1 pfile in my Local Machine
    "D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
    # Archive Log Destinations -benr(10/15/04)
    log_archive_dest_1='location=/u02/oradata/cuddle/archive'
    log_archive_start=TRUE
    Then i have ran the shutdown command.
    Database instance is showtdown.
    After that i am not able to perform startup.
    So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
    And also do i need to set the "Oracle_Home" path in my environment variables"
    Thanks In Advance,
    Chandana

    user11225122 wrote:
    Hi,
    I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
    And where exactly the spfile will be located?
    My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
    In this path i found 1 pfile in my Local Machine
    "D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
    # Archive Log Destinations -benr(10/15/04)
    log_archive_dest_1='location=/u02/oradata/cuddle/archive'
    log_archive_start=TRUE
    Then i have ran the shutdown command.
    Database instance is showtdown.
    After that i am not able to perform startup.
    So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
    And also do i need to set the "Oracle_Home" path in my environment variables"
    Thanks In Advance,
    Chandanaremove log_archive_start=TRUE from pfile (it is depricated from 10g onwards)
    SQL>startup nomount pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
    SQL>Create spfile from pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
    SQL>SHUT IMMEDIATE;
    SQL>STARTUP MOUNT
    SQL>ALTER DATABASE ARCHIVELOG;
    SQL>ALTER DATABASE OPEN;
    SQL>ARCHIVE LOG LIST;
    SQL>SHOW PARAMATER SPFILE;
    YOU WILL FIND THE LOCATION OF SPFILE
    SQL>

  • Why I change the energy level of port in PoE switch, the power usage of port no anyt change

    I am enable the EnergyWise on a 3560, plug a IP Phone to a port, the result of the power usage read by SNMP is 6kw, when i change the energy level from 10 to 0 by SNMP, the LCD on IP Phone is goes to dark and phone cannot be use, but when I get the power usage of port by SNMP again, the result still is 6kw. Can anyone tell me why?

    This project is just a short animation so every time I import the stills they are of the wrong duration so I try changing the duration by the other methods described previously, fail to be able to do that, erase everything from the project, restart and start again, initially with the preferences. So there's nothing for the still frames to conflict with. It's not the fact that there is a batch of stills that is the problem either as I keep experimenting with with single or small groups of stills in that context. I've also tried importing a variety of still formats into other projects. This is fairly new software. Could this be an incurable fault?
    1.25GHz Power PC G4 1MB L3 cache   Mac OS X (10.4.9)   80GHz hard drive 1.5 GHz Ram plus Firewire 400 250 GHz la Cie external hard dri

  • I need to change the input level and I can not open the track info pane in the new garageband. Can you help me?

    I have tried the help menu. It only shows how to open the track info pane in the old garageband. It shows the info button, which is not in garageband anymore. I need to open the track info pane to change the input level. If there is another way to do this please tell me.

    Open the "Smart Controls" for your track, and then press the Info button .
    The "record level" slider is at the top of the Info panel below the track heads.

  • Shrink Log file in log shipping and change the database state from Standby to No recovery mode

    Hello all,
    I have configured sql server 2008 R2 log shipping for some databases and I have two issues:
    can I shrink the log file for these databases: If I change the primary database from full to simple and shrink the log file then change it back to full recovery mode the log shipping will fail, I've seen some answers talked about using "No
    Truncate" option, but as I know this option will not affect the log file and it will shrink the data file only.
          I also can't create maintenance to reconfigure the log shipping every time I want to shrink the log file because the database size is huge and it will take time to restore in the DR site, so the reconfiguration
    is not an option :( 
    how can I change the secondary database state from Standby to No recovery mode? I tried to change it from the wizard and wait until the next restore for the transaction log backup, but the job failed and the error was: "the step failed". I need
    to do this to change the mdf and ldf file location for the secondary databases.
    can any one help?
    Thanks in advance,
    Faris ALMasri
    Database Administrator

    1. can I shrink the log file for these databases: If I change the primary database from full to simple and shrink the log file then change it back to full recovery mode the log shipping will fail, I've seen some answers talked about using "No Truncate"
    option, but as I know this option will not affect the log file and it will shrink the data file only.
          I also can't create maintenance to reconfigure the log shipping every time I want to shrink the log file because the database size is huge
    and it will take time to restore in the DR site, so the reconfiguration is not an option :( 
    2. how can I change the secondary database state from Standby to No recovery mode? I tried to change it from the wizard and wait until the next restore for the transaction log backup, but the job failed and the error was: "the step failed". I need to do
    this to change the mdf and ldf file location for the secondary databases.
    can any one help?
    Thanks in advance,
    Faris ALMasri
    Database Administrator
    1. If you change recovery model of database in logshipping to simple and back to full Logshipping will break and logs wont be resored on Secondary server as log chain will be broken.You can shrink log file of primary database but why would you need that
    what is schedule of log backup. Frequent log backup is already taking care of log files why to shrink it and create performance load on system when log file will ultimately grow and since because instant file initilaization is not for Log files it takes time
    to grow and thus slows performace.
    You said you want to shrink as Database size is huge is it huge or does it have lots of free space. dont worry about data file free space it will eventually be utilized by SQL server when more data comes
    2. You are following wrong method changing state to no recovery would not even allow you to run select queries which you can run in Standby mode. Please refer below link to move Secondary data and log files
    http://www.mssqltips.com/sqlservertip/2836/steps-to-move-sql-server-log-shipping-secondary-database-files/
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • How do I set the logging level with the plug-in 1.4

    I am writing an applet that will be hosted in the plug-in version 1.4. I'd like to set up some logging statements using the java.util.logging API. I have successfully got it to print out log messages, but it is not printing anything below level INFO. How can I set it up to print out log statements at the FINEST level?

    If you are using the default logger for logging from the applet, the default log level from the logging.properties file in your JRE lib directory is the place. There is an entry
        .level= INFO In this file. You can modify this entry.
    This is a a roundabout way of achieving it. since we are modifying the default log level here, it will be used by other java applications as well. I am looking for a better solution.

  • To check who change the trace level

    Hi All,
    Can anyone please help me how can i get that who change the trace level in system, in our client lot of people have Sm50, St01, St05,ST12 and other trace transactions, and it become difficult to track down who is changing the traces level
    people often change the trace level and forget, and it become difficult to track down the changes,
    can someone help me how can i know that trace level are changed by which user id at what time
    Thanks,
    Dinesh

    I cannot remember the exact names, but if you take look in those transactions (there are more than the ones you have listed..) then you will see a call to FM TH_CHANGE PARAMETER.
    You will see the name of the dynamic profile (and the authority check in it against S_ADMI_FCD action ST0M etc...) there, or some checks performed before the function is called.
    Then take a look in transaction TU02 for the history of the parameters...
    Good luck,
    Julius
    ps: A popular error exists in transaction SMGW: Wanting to dynamically set the gateway logging via the Expert Functions menu, you might be tempted to increase the "Trace level"... This is the ST11 developer trace!!! Rather choose the Security sub menu and activate the gateway specific log there, otherwise your production system might have some performance problems from the developer trace (which is a different local topic of less interest for gateway security....).
    Edited by: Julius Bussche on Nov 4, 2009 12:03 AM

  • How to change the Unitprice value from 2 decimals to 3 decimals in script

    Hi Gurus,
    how to change the Unitprice value from two decimals to three decimals for each item level for PO in script.
    Please provide some possible solutions.
    Thanks,
    V.V.

    Hi,
    Check the options available like
    &VAR(.2)&  this will print 2 decimals
    &VAR(.3)&  this will print 3 decimals
    need to change the value for how many decimals you need
    Thanks & Regards
    Sarves Sombhatla

  • Exporting a project with multiple audio tracks changes the loudness level regardless of export format

    I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
    I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
    After a bit of troubleshooting I found a workaround. I mixdown all of the tracks in adobe audtion to one track and then imported it into premeire.
    Once I did this the audio loudness was not changed after exporting.
    Workflow for when it didn't work.
    I used edit in adobe audtion for the audio tracks from premiere.
    Matched the audio to the loudness level I wanted, and then saved each track.
    Export from premiere.
    To Check Audio Loudness
    Bring in exported file into new premiere project
    Edit the audio in adobe audtion.
    Drag the audio file into match audio to check loudness level.
    I am using
    Adobe Premiere Pro CC v8.1
    Windows 7 on PC
    Please fix this adobe.

    I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
    I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
    I have never experienced that or had any need for a work around.
    What did your Broadcast Quality Control pick up on?
    Audio Levels and Loudness are two different things in this regard.

  • How to change the source level in java Studio creator

    Hi,
    I am using Sun Java Studio Creator 2 Update 1 IDE, in this IDE how to change the source level to 1.5 for an existing project.
    Thanks in advance,
    Rajesh.

    Hi!
    Unfortunately Sun Java Studio Creator 2 Update 1 doesn't support 1.5 source level. But You can try to download NetBeans IDE (from http://www.netbeans.org) and there with Visual Web project You will find the same functionality as for Creator. And 1.5 source level is supported by NetBeans.
    Thanks,
    Roman.

  • SAP DB  changing the Log mode to the "Owerwrite mode is ON"

    Hi!
    I would like to know, which consequences do I have, changing the Log mode to the "Owerwrite mode is ON".
    Is that comparable with Oracle's archive mode?
    What should I note proccessing so (e.g. to make back up)
    I don't use the system in productive mode and would like to save/spare free space on my server....
    Thank you very much!
    regards
    Axel

    Hi Marcus,
    once again to clarify: I know it from oracle: Is it right that , If I activate in SAP DB "Owerwrite mode is. ON" no new logfiles will be created.
    Only the existing logfiles will be overwrtiten.
    It means I "save" space, because no new log files a 4,5 GB will be created, is not?
    I am not familiar with SAP DB.
    How should I proceed with Backup (online, offlne)?
    Thank you
    regards

  • The problem about  the Log Level

    Hi everyone,
    The Log Level of Oracle Application Server includes NULL,Severe,Warning,Info,Config,fine,finer,finest.
    Which log level is the highest ?
    I want to get more message about My Esb instances,How to set the log level ?

    finest is the highest level logging and can either be turned on for all logs or just specific logs within the Enterprise manager.

  • How do i change the email that my info is sent to if iforget it?

    how do i change the email that my info is sent to if i forget it?

    If you know the answers to your security questions, then from http://support.apple.com/kb/HT5312 :
    Navigate to appleid.apple.com using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.
    If you can't remember your answers and you don't have access to your current rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699

Maybe you are looking for