5500 sport,Antenna Coupler and Holder incompatabil...

I have a Nokia 5500 sport which is causing some grief in relation to finding and appropriate antenna coupler and a suitable phone holder. I am wanting to install a CK- 7W car kit with an external broomstick antenna but am limited I think to a universal holder CR-39 because of the phone. I already have the CK-7W but need some advice as to which cradle I can get that will support an antenna coupler and what model of antenna coupler I should purchase. The dealer has sold me an AX-15s coupler and a CR-39 holder but the two do not match!
thanks in advance

The only company which i know of that do a cradle for the 5500 sport is THB Bury, but you will have to buy a full new car kit for this not a ck-7w, although it dose have antenna connection and charging.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Similar Messages

What is max sd micro card put in 5500 sport and wo...

i think i need to change micro card for my 5500 sport
what max and best microcard works great and not be slow for 5500
i need know best cards Company and modul

2GB cards are the maximum size that this model supports. It won't be slow.
You should choose a good brand like sandisk or kingston.
I recommend this one:
www.sandisk.com/Products/Item(2027)-SDSDQ-2048-A11M-SanDisk_microSD_2_GB.aspx
Message Edited by psychomania on 07-Mar-2008 10:49 AM

5500 Sport not responding afetr a failed update

I tried to update my 5500 sport this morning and it failed about 2/3rds of the way through and now it won't turn on! Can anybody help me?

I think that is what caused it, judging by the way I'm getting the ding dong, dong ding every coupe of seconds with the phone plugged in now.
When I tried the first time the phone froze an the updater told me it had lost the connection, so I started it again. Then when the updater told me it had lost the connection for a 2nd time the phone was dead.
Yes I think that the phone lost its usb connection but the cable wa never unplugged.

5500 Sport Fitness strap, or Carrying Holder and C...

I got my 5500 sport recently, but it seems that I lost the belt strap somewhere, and it's really irritating me, does anyone know where I can buy it? It would really be a relief to have it back!

psychomania, thanks man! you're a hero!
But unfortunately I wouldn't hope much of our servcice points here in Syria! I'm even afraid that they wouldn't even recognize the model lol!
I got my 5500 from Kuwait, so I'll ask one of my friends to request the strap there...

5500 Sport Firmware no longer in NSU

Hi,
According to NSU and "can I update" link, there are no longer software updates for 5500 sport.
I have no nokia care point near enough to travel too.
I have version 03.14 05-07-06
Can anyone tell me if there's anywhere else I can get the latest firmware?
Thanks a lot

Hi acenry,
I too have just got my 5500 back from repairs (with the new 3.18 firmware put on), although I sent mine in because my silent/general profile # button didn’t work.
So far I haven’t found my number buttons to come unstuck (I have had the black/silver 5500 since late September), although this could be down to the fact that I'm not a heavy user… I just press a few buttons now and then!
It must be said though that Nokia has definitely got a problem on their hands by not getting the glue/keypad issue sorted (perhaps a product recall would be in order to replace all the “old style” keypads?)
As for the browser issue, I find that if I go into “Web” under “My Own”, then I get the following message:
“Web: unsupported content type”
Although I am with Orange and it connects using the “Orange Internet” settings (perhaps they are causing it?), I do find though that I don’t have a problem (at least nothing I have found yet) if I visit a site (I have only gone to a couple but they seem to be alright, no error messages!)
I am hoping that either the keypad will hold out for the year (as I'll upgrade again then) or that it will fall off before the 6 month “consumables” warranty runs out in March ’07.
Hope this helps Harv (theenigma)
theenigma is an owner of: Nokia 5500, 5140i, 5140, 5100.
Have owned the following: Nokia 7110, 3210

5500 Sport

Hi can any one help I have a Nokia 5500 sport when I connect to a Parrot CK 3000 hands free in the car I can hear and receive messages but they some times cannot here me this seams to be an intermittent fault can any one help thanks Andrew

hi drew,
you can try to upgrade the software of your 5500... the 5500 defaults to low volume because this has somthing to do with regulatiions in EU...

5500 Sport - Volvo V 70 (2008) handfree set blueto...

I bought a Volvo V70 Model 2008 with built in bluetooth handfree kit. According to my Volvo Dealer the newest software is installed. My Nokia 5500 Sport connects without any problems but the phone book list on the car device remains empty (it works with my wifes blackberry and some other nokia phones i.e 2630). Does anyone have some helpful tips?

Car manufacturers are now building complex car kits into their vehicles.
One of the functions, is that it pulls the phone book data from the phone via bluetooth.
A lot of the Nokia E and N series, Symbian S60 handsets, or Ns40s do not carry the required bluetooth profile in their bluetooth stack.
The phone is missing the Phone Book Access Profile (PBAP) that allows the car to pull data from the phone.
Why the phones do not carry the profile is unknown. What is known is that using the Nokia 810 car kit downloader software, you can partly restore some of this functionality.
The information is here:
http://europe.nokia.com/A4143881
You'll need to delete the pairing in the handset and the car, then install the application.
When it is installed start the application, and then re-pair the phone to the radio, this may then copy your contacts into the radio, be paitent, as it can take a few minutes to copy and setup.
It may copy the phone book over, but the Missed Dialled and Received calls may not work.
I have tested this with an Audi S3, A4, and A6 on a Nokia N82 and N95.
The Nokia E71, appears to have the profile and functions correctly with an Audi car kit.
Installing the 810 downloader only restores phone book functionality, there are some software combinations on car and phones that work without the downloader.
It may also be possible for your car manufacturers franchised dealer to be able to update the software in your car so that additional features are available, they may charge for this service. Also updating software in the phone may also help, as Nokia may see fit to add the profile if they are able.
Some N95 users report that the downloader is not required, I have tried this in my S3 with a Vr30 N95-1 and it does not work at present.
The workaround only resolves the problem with the phone book. Problems such as random disconnecting which also is reported, are beyond the scope of this article.

Disable training in 5500 Sport

hello all,
I've recently bought a nokia 5500 sport and i noticed that the training application keeps starting every time i boot my phone.
There is no point of that since i never use it, so i was wondering if there is any way to uninstall the application or disable the automatic startup.
I tried to find the application files and delete them using a file explorer, however i couldn't find any...
any help would be much appriciated.

Hey man! Look there is one possible thing that you can do, plug your phone to PC (using DATA Cable), and chose one of three modes (excepts nokia mode)! Hope this helped ж)
Thanks!
KuzyaUKR

Are there any PC cards which have sample and hold capability

Are there any PC A/D cards which have sample and hold capabilities up to a 10 Khz sampling rate which we are interested in for modal testing of engine structures. Also if this type of card is available what would be the maximum input channel count of this card. We would be interested in the highest count available up to 64 channels.
A second question: We currently have a 64 channel PCI 6071 capable of 1.25 MS/s throughput. If we are using all 64 channels what would be the interchannel delay between the first and last recorded channel and at what frequency would we have to be sampling to even be able to see the affect of the interchannel delay of this specific card.
This issue has been debated wi
th in our group and your insight would be appreciated as you are the experts in this field.

Dear Sir,
Thank you for using NI Developer Zone.
National Instruments has a product line designed specifically for acquisition of dynamic signals, it is called DSA - Dynamic Signal Analyzers. In according to the description of your application the card that best fits your needs is the NI-4472 that is available in PCI and PXI format. This card is able to acquire 8 channels simultaneously, as opposed to the regular DAQ cards that have a single A/D converter and a multiplexer. The NI-4472 has 8 Delta-Sigma A/D converters one per channel, what results in a better performance than having a single A/D converter in combination with a sample and hold and a multiplexer. To Acquire 64 channels you would have to have 8 boards and synchronize all 64 channels. The Synchronization process is very simple and with a couple of software calls we can synchronize as many as 112 channels for simultaneous acquisition at 102.4K samples per second per channel.
Regarding your second question, the PCI-6071 will sample between channels in a single scan at the maximum sample rate of the board (1.25 MS/s) but the
scan rate, i.e. the rate in which the same channel is sampled is defined by the user. Being that said, we can conclude that the interchannel delay will be the inverse of the 1.25 MS/s clock, or 0.8 micro seconds.
For a 1 KHz sine waveform, this represent a phase delay of 0.288 degrees between consecutive channels. For a channel list of 64 channels each one having the same 1 kHz sine waveform, the phase delay between the first and the last waveform will be 18.432 degrees.
I really recommend the NI-4472 as a very good solution for your application, besides that the combination of the NI-4472 with LabVIEW and the sound and vibration toolset will give you a tremendous tool to solve not only your immediate need but also provide you a system that will be easily modified and adapted for future needs.
If you need more info, feel free to contact me and I can give you more details about this product.
Call 1 800 IEEE488 and ask to speak with the Computer Based Instruments (CBI) support team.
Best Regards.
Omar De Andrade
Applications Engineer - Computer Based Instruments
http://www.ni.com/support/

Nokia 5500 sport-lacking in features?

I just upgraded from a 5140i to a 5500 sport and in doing so tried to copy my contacts from the SIM to the phone. Not only do you have to do this individually, contact by contact (or have I missed something), but it does not copy the whole business card, preferring to set up a new contact for each line of the business card. Irritating at least if you have 200 entries on your card! Is there any way of overcoming this?
Secondly, there is no way of putting a reminder to 'call' a contact into the calendar as there used to be on the old phone. Useful, as you could call the contact as soon as the reminder prompted you.
Thirdly, the letters on the screen are tiny! At least there was an option to double the font size in the old phone (in 'contacts' - again! ).
Fourthly, there seems to be no 'timed' facility for setting a profile, useful if you go into a meeting for a period and come out and forget to switch to 'General' again.
Fifthly, calendar 'anniversaries' cannot be set up as date specific ie birthdays are now just marked as a reminder, without telling you how old the person is as there is no way of inputting the birth-date.
Sixth. Autolock operates on all profiles, it would be better to be able to choose which profile to apply it to.
If anybody has any suggestions about my comments I woud be interested to read them and find some fixes.

Hey, have the same phone and gps module and having problems connecting to gps satellite. Pairing the two seems ok - green and blue light flash but am getting no white light, just wondering how did you get yours working? thanks.

Nokia 5500 sport RM 86 - character reduced support...

Hello folks,
I bought 5500 sport gray, branded for operator Orange France.
I was disatisfied with it, and change product code to Balkans.
I got Serbian language.
Product code is: 0533823.
And with NSU, reinstalled firmware version 4.60.
I set serbian for writing language, then turned on character reduced support.
However, character support for Serbian does not work at all.
When I type our special coded characters such as: č, ć, ž, š and đ, number of remaining characters automaticly falling from 160 to 69.
I was curius and changed product code to Euro1, and character reduced support worked.
I back to balkans code, and still does not work...
I really like t9, and I cannot write SMS messages...
Experts, please, tell me, I found 12 product codes for Balkans but dont know which to put in function to character reduced support work...
Thank you verry much.

Talking about product code changes is prohibited in this forum. It is unofficial and is grounds for Nokia to refuse to repair or service your phone in any way.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Abominal Voice dial - 5500 Sport

The automatic "recognitition" of contacts is virtually unworkable, as it doesn't read contacts in the same way as I speak.
I think I speak quite conventional English, and have even tried to speak with the atrocious intonation of the auto- voice TAG. All is useless.
Is there anyway that I can record my own voice tags, or download software to do this? Otherwise, has anyone found a method to defeat the communication barrier, and make voice dialling work?

13-Mar-2008 05:37 PM
iwannacall wrote:
hey! i´ve got exactly the same problem..
when I make a call nobody can hear me! I'm using my old phone for the moment. because with the 5500 sport¨I'm only able to sen sms.
I have exactly the same problem.All suggestions and advice welcome. I'm using the headset to communicate

Simultaneous sample and hold

Hello everyone,
This is the hardware we are using our project and our labview version is 8.2
NI cDAQ-9172
NI-9025 Analog Input card
I wasnt able to find any information if this current setup is capable of simultaneous sampling and holding. Eventually, we want to monitor and control synchronous machines. I'm new to labview and if this equipment is capable of simultaneous sampling and holding does anyone have a sample program to illustrate this. from NI.com i did find some programs (thermocouples) that had "DAQmx create channel's" in paralled with eachother. I wasnt sure if that layout executed simultaneous sample and hold.
thanks in advance

Neither the NI 9205 nor the NI 9211 are simultaneous sampling modules. There are three analog input modules for CompactDAQ that support simultaneous sampling:
NI 9215 - 100 kS/s 16-bit +/-10V
NI 9233 - 50 kS/s 24-bit +/- 5V w/ AC coupling and IEPE excitation
NI 9237 - 50 kS/s 24-bit for bridge sensors
Please post if your application isn't handled by one of these modules. I suspect the 9215 will be a good choice, since it supports the same voltage range as the multiplexed NI 9205 that you already have.
Kyle

5500 sport model

my 5500 got busted and cannot be repaired anymore... is there a newer model with the same features? or an upcoming model close to the 5500 sport?

everything about it... maybe a slimmer version with all the same features, even the keypad color indicating when it is in sports or music mode is good maybe more cutomization for the light colors would be good and it fits your grip perfectly... maybe additional features like the colourise theme in the 7610 supernova would make it better... and a 3.2 megapixel camera... of course the text to speech and the tapping features for shifting modes should also be included... i wish there is an upcoming model that is very similar to the 5500...

5500 sport noone can hear me HHEELLPP

just been given a 5500 sport as a work phone people can only hear me when i am wearing my bluetooth earpiece, with the handset alone i am silewnt to callers and to people i am calling i can hear an echo of myself very loudly

its probably the phone, try calling someone different and see if that works, if it doesn't your microphone is probably blocked with something, check if its not dusty or the other option is taking it to a nokia service centre.
Nokia N95
V 20.0.015
0546553

5500 sport,Antenna Coupler and Holder incompatabil...

Similar Messages

Maybe you are looking for