5505 looking for latest version of OS available
I have a ASA5505 and currently running Version 7.2(4). I was wondering what the latest version of the software would available to me would be.
Here's a show ver
Cisco Adaptive Security Appliance Software Version 7.2(4)
Device Manager Version 5.2(4)
Compiled on Sun 06-Apr-08 13:39 by builders
System image file is "disk0:/asa724-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 23 mins 9 secs
Hardware: ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Int: Internal-Data0/0 : address is 0026.cbdb.fdc2, irq 11
1: Ext: Ethernet0/0 : address is 0026.cbdb.fdba, irq 255
2: Ext: Ethernet0/1 : address is 0026.cbdb.fdbb, irq 255
3: Ext: Ethernet0/2 : address is 0026.cbdb.fdbc, irq 255
4: Ext: Ethernet0/3 : address is 0026.cbdb.fdbd, irq 255
5: Ext: Ethernet0/4 : address is 0026.cbdb.fdbe, irq 255
6: Ext: Ethernet0/5 : address is 0026.cbdb.fdbf, irq 255
7: Ext: Ethernet0/6 : address is 0026.cbdb.fdc0, irq 255
8: Ext: Ethernet0/7 : address is 0026.cbdb.fdc1, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
With the installed memory, you can upgrade to 8.2(5).
With a memory upgrade, 8.4(4.1) is the latest release.
Either one requires a service contract to be elibible to upgrade.
Similar Messages
-
What is the latest version and updates available of Firefox for Mac system 10.3.9? Can you provide a link of this for downloading. I am currently using Firefox 2.0.0.20 but need to upgrade to use Bell.net email.
== URL of affected sites ==
http://Firefox 2.0.0.20 is the last version that works on OS X 10.3.9
You may want to consider using another browser if 2.0.0.20 does not work for your email. You could try using Safari for your email. If that does not work or prefer an alternative, a couple of options are [http://www.icab.de/dl.php iCab 4.8] or [http://www.opera.com/download/?os=mac&ver=9.64&local=y Opera 9.64] (Opera 10 does not work on OS X 10.3.9) -
Where is link for Offline installer, scepinstall.exe for latest version, curently 4.7.209 ???????
Where is link for Offline installer, scepinstall.exe for latest version, currently 4.7.209 ???????
I have looked for a link in the past for the scepinstall.exe file and it is always a MAJOR PAIN, if not impossible to find!!!!!!
Microsoft NO LONGER HAS AN EXCUSE FOR THIS LINK NOT EXISTING!!!!!!!!!
They have been told that it needs to exist and the logic for it is without error.
The ANSWER WILL NOT BE IT DOES NOT EXIST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
There is NO EXCUSE FOR THIS NOT TO BE AN EASY TO FIND DOWNLOAD MICROSOFT, NO EXCUSE, except maybe laziness or greed, but no technical or legal reason for it not being made available, obviously!!!!!!!!!!!!!!!!!!!!!!!!!!
There MUST BE A PERMANENT LINK MAINTAINED BY MICROSOFT WHERE I CAN AT ALL TIMES GO TO DOWNLOAD THE LATEST GREATEST STANDALONE SCEP CLIENT AT ALL TIMES!!!!!!!
Today it would contain version 4.7.209. When the next version is release I will click on the same link and it will down load that new version EVERY TIME, NO EXCEPTIONS!!!!!!!!!!!!!!!
I have been able to capture, during an update the epplauncher.exe file and its accompanying folders etc, but that installer does not support any command line switches like the scepinstall.exe version for the client installer does. Needless to say that is
ridiculous and stupid and incompetent of Microsoft to do, but that is what they did so needless to say I need the SCEPINSTAL.EXE version of the client installer that supports the command line switches, x64 and x86 in one file, no need to program in a check
for that. And of course a link is absolutely required so that I can always find the latest version and I will never have to re-write my install script every time the install files changes, or a new version comes out, nor spend time trying
to capture the file during an update etc. etc. etc.
Also don't tell me to go to the SCCM administrator, because he doesn't have a clue as to where this can be found or even that it exist. (The link given in the forums for finding it on the SCCM server DOES not maintain the latest greatest version at all times
so that is also not the answer.)
I should also NEVER have to extract it from the SCCM updates such as "Cumulative Update 4 for ConfigMgr 2012 R2" which is where I found the 4.6.305 version a few months ago.
Thanks for the help, get your act in gear MS,
RalphRalph,
You won't find a link to download as the SCEP update is treated as a Windows Update via ConfigMgr.
https://support.microsoft.com/en-us/kb/3036437?wa=wsignin1.0
You could join Connect and log this request with Microsoft by joining the Configuration Manager programme.
https://connect.microsoft.com/
You might want to lay of the exclamation marks when you do so, it would look a bit more professional.
Be aware there have been reported issues with the version of SCEP you are wanting to install.
https://social.technet.microsoft.com/Forums/forefront/en-US/2f597bc9-a686-4df2-b863-c28f18a3da2d/new-endpoint-version-causing-erroneous-virus-detections?forum=Forefrontclientgeneral
https://social.technet.microsoft.com/Forums/forefront/en-US/78d1d963-a74f-4a6f-8ff6-65d0b5a1516a/kb3036437-system-center-endpoint-protection-47-blocks-downloads?forum=FCSNext
Cheers Paul | http://sccmentor.wordpress.com -
I downloaded Yosemite and now my iPhoto has a bar across it and will not open. I need to update to the latest version. The app store says the latest version is not available in the Canadian Store. What can I do.
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
Question
All of a sudden, Adobe Flash is not working. Have installed the latest version to no avail. This happened at the same time on four (4) computers! Any suggestions?Well, I kinda figured that was true, so I disabled it. Firefox does not lock up now. I suspect it might be a Google Finance page graph that is causing the problem, rather that Flash. Thanks for all your help. J
-
I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?
If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while -
I just update itunes for latest version. Now I can't open it on windows 7- 64 bits. I get an erro: Cant find the entry point of the procudere sqlite_wal_checkpoint.. Windows error 127. What can I do...???
How did you fix this?
-
We have several licences of Adobe Photoshop Elements V9 can we use the same licence key for latest version or what version can we install is this key???
We are Gouvernment and we use Windows 7 64 bits edition with office 2010.
Thanks.Hi Denis, if you have license of Photosho Elements V9 then you can only install V9, please check the download link: Download Photoshop Elements products | 9, 8, 7. Please also check System requirements | Adobe Photoshop Elements
Atul_Saini -
Looking for older version of Itunes to run on Pentium(R) 4 CPU 2.6GHZ Windows XP
looking for older version of iTunes to run on Pentium(R) 4 CPU 2.6GHZ Windows XP
? Please read my original post again. Maybe how I said it was confusing but that is exactly how I checked it... in VISTA. Exactly the way the link you gave me described.
You do understand the message I am getting says: *itunes.exe has been set to run in compatibility mode for older version of windows. For best results, turn off compatibility mode for itunes before you open it.* I am interpreting this to mean that compatibility is set for something OTHER then VISTA since it it saying "for and older version of Windows".
When you tell me to "Check the compatibility mode in Vista not iTunes" what the heck do you even mean? How do you check compatibility in iTunes?
Thanks for trying to help, but not sure you read my post as I intended. I have seen one other post that mentioned the same problem, but that post never got a response that was helpful.
Thanks for trying. Later !
p.s. I still need help from someone. -
Hello everybody. Anybody knows link for latest version of Need for speed for OSx?
Hello everybody. Anybody knows link for latest version of Need for speed for OSx?
sig wrote:
Dispassionate cluelessness: Several years ago a little something called “Google” rained down from the sky. This Google provides the means for finding answers to many, many questions. I’m routinely amazed at how helpful people can be when others need assistance, but it’s unwise to abuse their patience by clamoring for increasing amounts of help when the answer you seek is a simple Google search away.
I always put that down to the UI
User Incompetence -
Looking for ANY version of RTS to download...
Looking for ANY version of RTS to download and I can't find it ANYWHERE. Can someone help????
Rob935741 wrote:
I don't need just any version, but a RT java vm for desktop applications, such as the Java RTS platform.[url http://java.sun.com/javase/technologies/realtime/faq.jsp#8]We have no plans to support Windows XP or Vista at this time as real-time behavior is not well expressed in those systems.
So, if you want RT on a desktop, drop Windows and install Linux.
[url http://java.sun.com/javase/technologies/realtime/index.jsp#requirements]Java RTS Minimum Recommended System Requirements
Although I am not sure it will guarantee RT once you install a desktop on top of Linux. -
Endless Checking for Latest version
JavaWebStart works fine when used anywhere within the network. However, we we logon to the network using a dial-up connection, java webstart never seems to pass the Checking for latest version screen. This screen runs for as long as the dial up connection stays up. Has anyone seen this type of behavior? Another interestin fact is that webstart's examples run fine with our dial connection. It is slow but it works. Here is my jnlp
<?xml version="1.0" encoding="utf-8"?>
<!-- JNLP File for Test-->
<jnlp
spec="1.0+"
codebase="http://mySever/webStart"
href="myJavaTest.jnlp">
<information>
<title>Java Test</title>
<vendor>Me</vendor>
<homepage href="http://myServer/webStart/index.html"/>
<description>java test application</description>
<description kind="short">Test for WebStart</description>
<!-- offline-allowed/ -->
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.3"/>
<jar href="first.jar"/>
<jar href="asrt.jar"/>
<jar href="vbejb.jar"/>
<jar href="vbjorb.jar"/>
<jar href="vbsec.jar"/>
<property name="ejb.jsec" value="true"/>
<property name="vbroker.agent.addr" value="frodo"/>
<property name="vbroker.agent.port" value="14001"/>
</resources>
<application-desc main-class="com.test.MyApplication"/>
</jnlp>Our team ran into the same problem trying to connect to one of our test web servers, when the client ran Webstart using JRE 1.4 from behind a certain evil
Proxy Server, Webstart would get stuck in the "Checking for latest version". Note that this only happens when behind the proxy, everything runs fine with
a direct connection and users behind the proxy using JRE 1.3 also did not experience any problems. We later discovered that Webstart would complete the downloading of
updates and run our app, only it would take 40 minutes to complete (left it running overnight). The strange thing was that this problem only
occured when connecting to certain web servers of ours while there was absolutely no problem whatsover when connecting to other servers.
What we found was that when Webstart made a request (HEAD and later GET), the server would send the header/file back correctly. But we did notice
one thing. For the servers that were "working" we noticed that it would send the response and then close the connection. But for servers that
weren't working we discovered that it would send back the response but it WOULD NOT immediately close the connection. Instead the connection is
kept alive until a few minutes later.
The solution was that for web servers that were working, we had the KEEP CONNECTION ALIVE option OFF. (In the case of IIS its the Keep-Alive checkbox).
On web servers that weren't working (Webstart getting stuck checking for updates) the Keep alive option was ON. That was the problem. Once we disabled
the Keep-Alive option on all our web servers everything was fine and users behind the proxy, using webstart with jre 1.4 were once again able to
Check for Updates quickly and proceed to launch the app, whereas before it would take 40 minutes to Check for Updates and load the app because for
each request it had to wait for the connection to time out (900 seconds) before the next request could be made.
Well thats what we found in our research. We were pulling our hair over this for nearly a week. Hope this helps.
Thanks,
Nathan -
JWS Hangs "Checking for Latest Version"
Dear Colleagues,
We�re facing up a problem with the following situation:
the "checking for latest version" process seems to be hanged, or better, very, very slow.
We just got answer after more than 10 minutes in average.
The environment:
Apache 2.0.54
JRE 1.4
Any suggestion?
Tks.Sounds like the delay may be due to searching the
jnlp cache. Restrict the cache size and see ehat
happens.That's not it. I tried it even though the cache is empty except for my app and it didn't help. Thanks for the suggestion, though. -
I'm looking for latest X-Code for Lion
I'm looking for latest X-Code for Lion. AppStore shows me only 10.8.x and up.
Go to this page: https://developer.apple.com/downloads/index.action?name=Xcode, sign in, and find Xcode 4.6.3 (it's on Page 2).
-
Please tell me the price for latest version of FCP in India.
Hi,
I have bought a mac computer from US but want to buy an FCP latest version. Kindly tell me which version would be better and what would be the price of that? and from where I can purchase it?Click here for information. The current version of Final Cut Pro is not available outside of Final Cut Studio 2.
(43216)
Maybe you are looking for
-
Macbook a1181 display blanks out replaced the lcd inverter still blanking out
Replaced inverter still blanking out.
-
How to turn a tablespace offline when...
Dear All, I need assistance; Which SQL statement can I use to open an oracle 8i database when the 'users' tablespace is in offline mode.
-
Function module to calculate quantity of unrestricted stock
Is there any function module to calculate the quantity of unrestricted stock in alternate units of measure. For example we have a material '123456', its unit of measure is 'EA'(eaches) and we have 172 'EA'. but this material can be issued only in box
-
For my White N97 its lagging while you are watching Youtube Videos in full screen(Youtube Desktop Version), if you tap on the video for any reason (to go back, play another Video..Etc) the whole window and browser will be closed and any other open ap
-
XFCE popup message in panel not appearing
after upgrade to last XFCE release i seem to be unable to see the popup messages from items on panel such as Network monitor. I hover with mouse cursor over it but nothing appears. Anyone had similar happening?