5508 License Question

Dear Friends,
I have two 5508 WLC, one of them is in Active, and the second one is in Standby mode
Standby WLC inherited 100 AP license from Primary(Active) WLC, the question is if i add license with Adder license will the second WLC inherit those addtional licenses?
Thank you

Both the WLCs have a valid AP Count license
The CLI should be used to configure one WLC as the Standby WLC (as mentioned in the configuration section) provided it satisfies the requirement of minimum permanent license count. This condition is only valid for the 5500 WLC, where a minimum of 50 AP Permanent licenses are needed to be converted to Standby. There is no restriction for other WLCs such as the WiSM2, 7500, and 8500.
AP-count license information will be pushed from Active to Standby.
In the event of a switchover, the new Active WLC will operate with the license count of the previous Active WLC and will start the 90-day countdown.
The WLC configured as Secondary will not use its own installed license, and only the inherited license from the active will be utilized.
After 90-days, it starts nagging messages. It will not disconnect connected APs.
With the new WLC coming up, HA SKU at the time of paring will get the AP Count:
– If the new WLC has a higher AP count than the previous, the 90-day counter is reset.
– If the new WLC has a lower AP count than the previous, the 90-day counter is not reset.
– After switchover to a lower AP count, the WLC offset timer will continue and nagging messages will be displayed after time expiry.
Source: http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId-44092

Similar Messages

  • Lumira Server for BI Platform and Team/Edge consumption & licensing question

    Hi.  I have a few questions.
    Question 1:
    From my reading, I've heard that Lumira Edge/Team server may not be a part of BI-Suite License.  I read a Lumira Server ASUG Webcast recap by Tammy Powlas here (SAP Lumira Server for Teams Roadmap ASUG Webcast) over the weekend and one of the Q&A questions struck me:
    Q: Is this included with the BI Suite license from SAP?
    A: Lumira Server for Teams (Edge Edition) is not covered under BI Suite License. However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
    In a separate conversation late 2014, I thought I'd heard that Lumira Team/Edge server was supposed to be usable by BI Suite licensed customers, but it sounds like I'm mistaken?
    Question 2:
    Next, the second part of the statement gave me hope:
    However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
    I then looked at the Lumira Deployment Options for Departments Part 1 – ASUG Webcast by Tammy Powlas to get some more information on Lumira Server for BI Platform.  This slide gave me some hope (emphasis mine in green):
    But then I see some more information a little later:
    Is this slide to imply that the version without HANA (or HANA XS) for BI Platform will only really just serve as a user rights management and Lumira document repository?  And that if I want to view a Lumira document, I must still open from the Lumira Desktop client?
    It was suggested I start a new discussion thread to ask this licensing question about a product that's not out yet (but the slide says it's GA so I'm still confused) so here I am with my discussion thread!
    Hopefully someone can make me less confused.  I'm hoping the answer is as a BI-Suite customer that we do not have to make a decision to either invest in new Edge/Team licenses or buy HANA XS hardware to establish a beachhead of Lumira usage in our organization.  We've been struggling with promoting Lumira and the sharing piece has been the sore spot.

    Hi Michael
    You are right, it is confusing...
    I think it will be better to contact sales to get this explained as opposed to technical support people that monitor this SCN Space.
    Sales ph: 866-681-3435, 1-800-677-7271
    Worldwide Office Locations | SAP
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow me on Twitter (#SAPLumira)
    Got Enhancement ideas? Use the SAP Idea Place 

  • Instant Client SQL*Plus License Question

    Can anyone shed some light on a license question for me? (I know that most license questions are for Oracle Sales to handle, but this involves a supposedly free product.)
    I want to use SQL*Plus with the Instant Client in a production environment, but I am not sure whether I am entitled to. Does Instant Client "support" SQL*Plus only in the sense that if I already own a license for SQL*Plus I can use it with the Instant Client, or is the Instant Client SQL*Plus package also truly free to deploy and use?
    The download page has links to download a basic Instant Client, plus several optional packages, one of which is SQL*Plus. However, the FAQ does not tell me whether the optional packages (specifically SQL*Plus) is also free to deploy and use in a production environment, and I could not find any other helpful document.
    The FAQ says that "Instant Client is FREE for anyone to use in a development or production environment." It also says immediately following that "Instant Client can be used to run your OCI, OCCI, Pro*C, JDBC, and ODBC applications without installing a full Oracle Client. In addition, Instant Client supports SQL*Plus." [emphasis mine]
    I would appreciate any help on this.
    Thanks in advance,
    Anthony

    Why don't you call Oracle sales? I guess they'll be happy to answer your question.
    Yours,
    Laurenz Albe

  • CS5 Student License Question

    Licensing question:
    In 2011, I purchased a student license to CS5 for my mac.  I have installed it on one laptop that I am the primary user of.  The laptop has two user logins, mine and my husbands.
    Can my husband use CS5 on the computer on an occassional basis (either through my username or his) and still be okay from a licensing point of view?  There are several questions that hint at this, but I can't find a clear answer.  I've read the EULA, but I'm still confused whether this is permissable or not.
    Thanks for any help.

    That's into the area of legal interpretation, but you don't need to overthink it. You may have purchased the license, but technically the activation is per computer, is it not? So one could simply assume that this is perfectly intended or at least within the freedom that the EULA provides... It's not like you're letting your neighbors use it for a buck an hour, or is it?
    Mylenium

  • BO XIR2 Licensing Question

    Was hoping if someone could help me out with a licensing question I have. I am trying to understand how BO licensing works.
    I think it would be easier if I asked the question through an example.
    The scenario is a situation where we have a standard BO XIR2 enterprise installation with an app server, db server and web server.
    1. The app server is a normal BO XIR2 installation
    2. The web server is also as from a BO XIR2 installation.
    3. The db server runs the data store and audit module is on in the db.
    4. The following report types are to be used by the end user
        4a. Crystal Reports
        4b. Web Intelligent reports (View, drill down etc)
        4c. Desktop Intelligence report (View, drill down etc)
    5. The development box is the same setup in which the 10 developers should have access to have access to these build the universes, crystal, webi and deski reports.
    6. The prod environment will be used by 50 users who should be able to access webi crystal and deski reports.
    7. These users should also be able to create custom webi reports
    Since the licensing for BO is a bit different, can someone please help understand all the different types of licenses required for this setup?

    BO licensing is pretty straight forward, but you should speak to a sales rep for particulars. Generally from the server we have 3 types CPU (in which case everything you stated would be supported), Named Users (in which case you would need 1 per user logging in) and concurrent users (which would require enough licenses to support the maximum of concurrently logged on users).
    The slow response is likely due to the US thanksgiving holiday, I'm sure more folks will be back next week.
    Regards,

  • Licensing question for AD enterprise with new SQL Server

    Hi!
    We have Server 2008 R2 STD where our AD is located and it has enough User CAL's. Additionally we have Terminal server with TS licenses.
    Now we're purchasing a Server 2012 where we plan to install SQL Server 2012 STD where we will install our third party program and this program is going to be used through Terminal server. 
    Now the question is do I only need SQL CAL's or will I have to get both SQL CAL's AND User CAL's for the new server? I'm thinking AD servers User CAL's is enough for the whole enterprise, but I'm not 100% sure and need help with this!
    Thanks!

    Licensing questions should be directed to trained Microsoft licensing specialists instead of a technical forum. 
    www.microsoft.com/licensing. 
    That said, SQL CALs and operating system CALs are sold separately.  Talk with the vendor from whom you are purchasing your licenses.  They should be able to help you sort out the CAL questions.
    . : | : . : | : . tim

  • OPSS API licensing question

    Hi product managers,
    Is there a licensing restriction on use of OPSS API's with ADF essentials ? Will this API be included in the future ADF essentials build ? Will there be a separate licensing cost for this API in this case one might use the Apache LDAP API's.
    I have seen the OPSS FAQ whitepaper but it said that post 11gr1 release they might offer it separately but the document is really old.
    Regards,
    Ramandeep Nanda

    Hi Ramandeep,
    Licensing questions are best answered directly by the Oracle Sales team - the answer could depend on the products that your company already have licensed, and how they are bundled etc.
    Regards,
    Colin

  • Storsimple design/licensing questions

    Hello all,
    I have read the online docs, but I still have some questions:
    1. How does the pricing for the Storsimple actually works? What I understand from the website that you actually get it for free but you need to purchase a 2 year licence of 50 or 100 TB?
    2. The Virtual Device is probably not included in the license? Meaning that I would actually pay for a normal Azure vm with the included storage in order to have this Virtual Device?
    3. Question 3 actually could cause me to pay double for the storage? The storage for the Storsimple and the same storage that is located in azure for the Virtual Device?
    4. Deduplication works on a per container basis or on per a whole device? 
    5. Is the storage that is written to Azure also stored in a deduplicated form in Azure. The Virtual Device and the azure storage for the physical storesimple.
    6. In what ways can I used as a backup target? I think only as a LUN presented to a backup server right? I am aware of the backup possibilities, but I do not have the data stored on the Storesimple itself.
    7. It does not look as if I can scale a Storesimple out. So if I am growing over the years then it could be that the performance will drop because it needs to retrieve more and more from azure?
    Thanks!

    You should discuss all licensing questions with your Account Executive. They can explain all of your options to you.

  • Licensing question. Buying older components of OS X.

    Licensing question. Buying older components of OS X.
    My first question is where might I find an older version of imovie?
    If you purchase OS 10.4 Tiger, are you entitled to download an earlier version of imovie such as imovie2, imovie 3 or imovie4 for no cost? Or must I also purchase iLife05 in order to instal any version of imovie? The reason I ask is that I remember that OS 10.1.5 use to have imovie included. Now imovie seems to be part of iLife which is a separate software package to purchase.
    How and where might I find an earlier version of imovie? I ask this in terms of older computers that may run the older versions of imovie better than imovieHD.
    Here is why I was asking:
    I once spoke with someone at Apple who explained to me that if you purchase an OS from Apple, you are entitled to the software from earlier OSes. If I remember correctly, the example we were discussing was in terms of fonts. I must be certain to indicate that this is how I perceived the licensing issue and I could be incorrect in my understanding:
    "If a user purchases an operating system from Apple, they are entitled to install any software from previous releases of the Operating system." For example, if a user purchases a second computer such as a portable computer, and then purchases mac os 10 for that computer, he or she may legally install any fonts that may have been bundled with any earlier Apple Operating Systems such as the fonts that came bundled with OS 8.5.
    On Apple's web site is an area where one may download old software (old os systems) for free. These bundled fonts may be installed on as many computers as one would like because Apple offers them for free. You most likely would need to have purchased at least one of Apple's Operating Systems to be able to legally use the software from any earlier versions of your Operating System.
    And so I would like to ask if this could be also considered in terms of OSX. If I buy Tiger, am I legally entitled to Panther on that same computer? This may be helpful for someone who would like to use Tiger as well as some older components of Panther. Maybe for some reason ical version 1.5 (in Panther) might be prefered over ical version 2.0 (in Tiger) due to some computer compatibility issue. Whether this is practical or not I am just outlining a theoretical example to help understand the specifics of Apple OS licensing.
    And so I would like to ask this question in terms of imovie. How might I purchase an older version of imovie? May I purchase Tiger and then find an OEM version of Panther which I would then be legally entitled to install on that same computer? Or is there a place on the Apple website where users of Tiger are able to download older components from older OSX versions?
    Or must I purchase the retail versions of both Tiger and Panther?
    Thank you for any clarification,

    Thank you Allan and Dakota for jumping into this issue.
    Allan, you have been very helpful with your comments and I think you have answered the question which is "no" (unfortunately). To summarize then, if you purchase an OS, you are not entitled to the components of an earlier OS - unless Apple makes it available free on their website. For example, if you purchase Tiger, you are not entitled to any components of Panther or Jaguar - even the older imovie that came with 10.1.5. It would be nice if Apple jumped into the discussion here to confirm this, however I am sure that is what they would say. Unless I hear otherwise I will assume this is also Apple's stance - that if you purchase an OS 9 (or application), you are not entitled to the components of an earlier OS (or application).
    Dakota raises a good point also. However, unfortunately I see a small legal technical flaw with Dakota's procedure. Apple licences software per computer rather than per user. (I believe Adobe's licencing policy is the other way around - which I prefer.) And so technically iMovie 3.0.3 is only licensed to the Powerbook and cannot legally be copied to the iMac even if the iMac is running the latest version of iLife (and Tiger). You see, that was one of the key issues in this original post.
    Personally I wish Apple would lessen the restriction on this policy with a clause in the licencing agreement allowing use of some earlier versions of applications (or OS components) to be used - especially the iLife components such as iMovie or iPhoto.
    Licencing per user rather than per computer seems to be a little more practical for users in terms of promoting people to adopt the digital lifestyle considering many people have a workstation at home and also carry a portable on the road - well a little less costly anyways for the user. It would be nice if we were able to legally copy certain components across devices but that doesn't seem to be the case today with Apple. Perhaps Apple's licencing policy could be a hybrid model and follow some aspects of Adobe's licencing model. Here's an idea: allow users to pay for a "sub" licence for older apps. Everyone would benefit. Apple would earn more income from us and we would legally be able to use more Apple software on more devices. Just a few thoughts to share.
    Mike

  • WS2012R2 Licensing Question - 95% confident of my understanding, but would appreciate confirmation

    After a huge amount of research, I THINK I understand how WS2012R2 licensing works.
    Since we’re a new business, we’re keeping things pretty simple for the time being.  I would appreciate some confirmation that my understanding of licensing makes sense though.   
    I first describe our architecture, then the four options, and then my understanding of the four options.
    Many many thanks in advance; this forum has been incredibly helpful as I get started with these issues.
    Machine 1 @ Site 1:  
    OS: WS2012R2 (operating at hypervisor only)
    VM1: WS2012R2 (operating as remote desktop session host)
    VM2: WS2012R2 (operating as remote desktop connection broker and remote desktop licensing server)
    Machine 2 @ Site 1:
    OS: WS2012R2 (operating as hypervisor only)
    VM1: WS2012R2 (operating as server for electronic medical record software)
    VM2: WS2012R2 (operating as domain controller, DNS server, and DHCP server)
    Machine 3 @ Site 1:
    OS:  WS2012R2 or HVS2012R2 (operating as hypervisor only)
    Machine1-VM1: replicated here using Hyper-V Replica; not running.
    Machine1-VM2: replicated here using Hyper-V Replica; not running.
    Machine2-VM1: replicated here using Hyper-V Replica; not running.
    Machine2-VM2: replicated here using Hyper-V Replica; not running.
    Machine 4 @ Site 2:
    OS: WS2012R2 (operating at hypervisor only)
    VM1: WS2012R2 (operating as remote desktop session host for remote users)
    VM2: WS2012R2 (operating as remote desktop web access and remote desktop gateway)
    Machine 5 @ Site 2:
    OS:  WS2012R2 or HVS2012R2 (operating as hypervisor only)
    Machine4-VM1: replicated here using Hyper-V Replica; not running.
    Machine4-VM2: replicated here using Hyper-V Replica; not running.
    We've identified the following four options:
    Option 1:
    Primary Machines 1, 2,4 = WS2012R2 Standard OEM Edition
    Backup Machines 3 and 5 = HVS2012R2 Edition
    Option 2:
    Primary Machines 1, 2,4 = WS2012R2 Standard Open License Edition
    Backup Machines 3 and 5 = HVS2012R2 Edition
    Option 3:
    Primary Machines 1, 2,4 = WS2012R2 Standard OEM Edition
    Backup Machines 3 and 5 = WS2012R2 Standard OEM Edition
    Option 4:
    Primary Machines 1, 2,4 = WS2012R2 Standard Open License Edition
    Backup Machines 3 and 5 = WS2012R2 Standard Open License Edition
    My understanding is as follows:
    Option 1 is flawed because we would not be able to boot up the VMs on machines 3 and 5.  This is because a standard OEM edition license cannot be transferred, and so in the event of hardware failure, the license stays with the primary machine and cannot
    be moved to the backup machine.
    Option 2 is somewhat flawed due to the 90 day limit on transferring licenses.  For example, say Machine 1 fails, and I transfer the VMs and the license to Machine 3.   That step is permitted, however, I cannot reverse this transfer for 90 days
    which is obviously suboptimal since Machine 3 is intended to be a temporary backup machine.
    Option 3 is sufficient for my needs, subject to the only caveat that I understand that these OEM licenses are "locked" to the physical machine and cannot be transferred to another physical machine.   There are NO other limitations (e.g. I
    would be able to legally and practically migrate a VM from Machine 1 to Machine 3 without worrying about activation issues, etc...)
    Option 4 is sufficient for my needs, and would be the most flexible as the licenses could be moved if necessary down the road.

    As has been stated many times in this forum, it is best to talk to a trained Microsoft licensing specialist about licensing questions.  Remember that a license is a legal contract between you and Microsoft, and using a forum for legal advice is a tad
    risky.  Free advice is worth every penny.  www.microsoft.com/licensing.
    That said, non-OEM licenses will always give you the most flexibility.  Secondly, you can get a volume license discount with as few as five copies of software, so you might want to investigate that.  Volume contracts provide additional benefits
    outside of the what you get with the licenses.  Lastly, ensure that you have enough licenses to host the maximum number of VMs that will ever be running on a given host.  Hint, you mention Standard on a host that is a replica for four VMs. 
    If all four of those VMs are running, you would need a minimum of two Standard licenses assigned to that host.
    .:|:.:|:. tim

  • WLC-5508 License Moves

    Hello,
    My network has 26 WLC's. 11 of them are 4402's, the rest are 5508's. 4 of the 5508's are the mobility anchors for the guest traffic. This summer we are removing the 4402's and re-arranging. 6 of the locations will be converted to Meraki. The goal at the end of the summer is to have these locations switched to Meraki and the 5508's consolidated. They will be set up at 4 sites. 1 site just a guest controller. The other 3 will have 3 5508's. 1 for mobility anchor, 1 for the AP's in the sector, 1 as a failover. I have been planning this setup and came upon a question. How do I consolidate the licenses on the 5508's? I have enough from the Meraki locations to comfortably support our AP's, just not per 5508.

    Indeed. The only possibilities are 100/100 or 100/0.
    100/100 means, it's a 100 ap license and it's activated.
    100/0 means that it's a 100 ap liecnse but it's not activated on the WLC.
    I don't see a way of only activating half of the AP count of one license (100/50 for example). I don't think that this is possible.
    Nicolas

  • License Question for SharePoint Foundation 2010

    I have a question as it regards to the user agreement for SharePoint Foundation 2010. 
    When I deploy code to the front-end of the Foundation service which directly modifies the code on the front-end to make the system do anything different out of the box, does this mean I have violated the code agreement. 
    For instance, using JQuery to manipulate the look and feel of a form, use third party tools like SPServices, attach SharePoint Designer workflows, modify the server end by using STSADM command line to turn features on and off, create and deploy site
    collection features using Visual Studio, or create web parts? 
    Also, if I am using this software for business purposes of any kind, does it mean I need to purchase the software?
    I have received a copy of Share Foundation along with a Server 2008 R2 OS which was purchased. 
    IF I use Foundation to run my business processes, am I in violation of the user agreement and do I need to purchase SharePoint Server 2010 with CALs?

    The official answer: "I'm not a licensing person. Please contact Microsoft."
    In general:
    Foundation is a "free" download, but can only be installed on Windows Server. You can install Foundation 2010 on Windows 7, but only for testing/development, not as a production server.
    Foundation is "free" in that it is licensed as part of the Windows Server it is installed on.
    If you have 500 users, then Windows Server will need to be licensed for 500 users. The Windows Server licensing will also depend on if the users are internal or on the internet.
    SQL Server: If you are using SQL Express, then no license costs, but the number of SharePoint users may impact the licensing costs of your SQL Server.
    The choice between Foundation vs. Standard or Enterprise is the list of features needed and scalability (how many users?).
    "JQuery, SPServices, SharePoint Designer workflows, STSADM, Visual Studio..."
    None of those will impact your licensing. Anything that you do to directly query or manipulate the SQL tables will impact your support. SharePoint is a platform and you are expected to configure and customize it.  
    Mike Smith TechTrainingNotes.blogspot.com
    Books:
    SharePoint 2007 2010 Customization for the Site Owner,
    SharePoint 2010 Security for the Site Owner

  • ASA 5510 VPN Peer License Question

    I just got a new ASA 5510 Base Model and I have some questions I would love some help on.
    1) I was under the impression that the ASA 5510 could support 250 VPN Peers. When I do a show version on this new unit I am told VPN Peers are only 50. I would like to have more than 50 L2L VPN Tunnels and RA clients connected at one. Where did I mess up with this understanding?
    2) I am running ASA Software Version 7.0(6) this is how it was shipped to me. I hear that 7.2 is the latest? Can I get this upgrade from Cisco?

    Hi,
    There a couple of points here which are a bit tricky - the first is the software versioning of PIX/ASA software. If we have a look at how it work in IOS (It would be useful if there was an equivalent paper for PIX/ASA...)
    http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_white_paper09186a008018305e.shtml
    The basic idea is that if you go from 7.0(1) to 7.0(2) you're getting more software fixes and less new features but if you go from 7.0(1) to 7.1(1) you're getting more major new features but less software fixes. On PIX/ASA there seems to be a fairly clear choice between stability and features. Don't forget that the 3 trains have releases independent of each other so it doesn't necessarily follow that the highest numbered release was the latest one, let alone the most stable one. Before 7.2(2) was released last November the latest release was 7.0(6) and we actually standardised on this because all releases above 7.0(6) were giving us issues (especially the 7.1 versions). We're trialling 7.2(2) at the moment and it seems to be as solid as 7.0(6) so that also looks like a good choice.
    With that in mind we need to look at the feature sets of the various releases, and currently 7.2(2) gives you 250 maximum concurrent IPsec sessions whether or not you have the Security Plus license. I think this change happened during one of the 7.1 releases. If you only have 7.0 then you get 50 as standard and can upgrade to 150 if you have a security plus license. (With 7.2(2) you still need the security plus license to get failover and vpn load balancing - but not to get the 250 sessions.)
    As to upgrading - it's possible 7.0(6) was actually the "latest" release when you purchased your box and unless you specified a particular version when you bought it this is what you normally get (you can ask for any version you like at no charge when you buy it initially). You really need smartnet for the ASA because the standard Cisco warranty is rubbish (90 days only and you wait 10 days for a replacement) so unless it's a test network you're pretty much forced to buy smartnet to be sure of a fast replacement (or any replacement at all after 90 days..) Also, the cost of a smartnet contract for a year if you only need NBD replacement is less than the cost of a one-off software upgrade AND you get to download any version you like for the year AND you can also log calls directly with the TAC.
    So, I'd recommend buying a smartnet contract and then go through the release notes to find a suitable release to download - sounds like 7.2(2) might be what you need - at the very least you should be upgrading to get more sessions rather than sticking to 7.0 and buying a security plus license. (Because both the one-off upgrade and the security plus license are probably more expensive than smartnet!)
    HTH - plz rate if useful
    Andrew.

  • VPN License question on 5505 ASA Firewall

    Inherited a firewall project, it's getting a VPN running on a ASA 5505 Firewall for remote workers.  Firewall was configured by someone else who isn't available. 
    Basic question on the License: The current license is good for 2 SSL VPN Peers, and 20 "Total VPN Peers".  Can anyone elaborate on "Total VPN Peers"?  Can I configure Clientless SSL VPN connections, or do I need to go IPSec to get the 20 VPN sessions?
    Thank you in advance,
    Jeff

    Hi Linda,
    The default IKE SA lifetime is 86,400 seconds and the default IPSEC SA lifetime is 28,800 seconds. However, these values are configurable so you'll need to check your 5505 configuration to answer these questions. You can look at the output of 'show run crypto' to see the configured values.
    -Mike

  • Yet Another ASA VPN Licensing Question :)

    I have a pretty good understanding of ASA VPN concepts, but not sure about this scenario.  Two questions regarding 5525 VPN SSL Anyconnect Premium Licensing.
    1.  Assuming we already own a ASA 5525-x with 750 Anyconnect Essentials and Mobile ( p/n ASA5525VPN-EM750K9 ) and want the ability for 200 Clientless (Anyconnect Premium) VPN connections, including mobile devices, what part number do I need?  
    2.  Assuming we do not yet own a ASA5525, but want the same 200 clientless VPN connections plus mobile device connectivity, what part number do I need?   I'm assuming this is correct  >>  ASA5525VPN-PM250K9
    Thanks!

    It's no problem - I sometimes look for an answer to a question myself and find my own 2 year old post explaining the answer. As long as I don't find my 2 week old answer, I'm OK with that. :)
    Anyhow, no there's not a SKU to upgrade Essentials to Premium. All the Premium upgrade SKUs are between Premium licensed user tiers (10-25, 25-50, 50-100 etc.).
    If you're a persuasive customer and make a strong case with your reseller they may be able to get a deal with Cisco outside the normal channels to get some relief as a customer satisfaction issue. That's very much a case by case thing though and not the normal fulfillment method.

Maybe you are looking for