5508 Monitor client "link test" not working
I have multiple sites with 5508s. They are all currently on 6.0.199.4 and when I click on a specific client and hit the link test button, I always get a failure. I can actively ping the clients so I know they are currently connected. Any ideas what would cause this?
Hi,
Client Link test works only if the client is CCX compatible.. please check the client details and see if its compatible or not!!
Lemme know if this answered ur question!!
Regards
Surendra
Similar Messages
-
I can not get the link test to work with any of my clients. I am using WCS 6.0.170.0,
the WISM is my DHCP server and we requires all users to use WPA 2 to connect.
For some reason I am not able to ping any of the clients or run a link test. I have not be able to figure out why. Can someone provide me with some insite?
Thanks
MikeHi Mike,
I posted this on my site about client link. Take a gander... Your clients need to be CCX v4 or newer
http://www.my80211.com/home/2009/11/15/cisco-wlc-linktest-how-well-does-the-ap-hear-your-client.html
If you find this helpful kindly rate the post ... -
ADF Tabe's Pagination link does not work when embedded in iframe
Hi experts,
When I embedded ADF table(with JSF) in iframe like below code, the pagination link does not work. Is it a known bug?
<iframe width=100% height=500 src="http://rst-act3ct2.us.oracle.com:8888/test/faces/modify.jspx" frameborder="0" scrolling="no"></iframe>
When I use <object> instead of <iframe>, the pagination works again. However, <object> could not be used in my project.
Any idea on it?
Thank you in advance.
Regards,
TonyHi,
if you are on JDeveloper 10.1.3 then chances are that the problem can be pointed back to the mismatch of HTML and JavaServer Faces. At least you should make sure you work with a recent JDeveloper 10.1.3 release
Frank -
Reply link does not work on ipad
After logging in to this group, the reply link does not work on either my ipad 2 running IOS 8.1.3 nor my iphone 4 running 7.1.2. Not helpful really. I have had to switch on my old laptop.Also I never know which group to post a new question in, The names like Snow Leopard dont really give me a clue, so if the key word does not find an existing topic, i just end up guessing.
You seem to have double posted, Lynne. I have replied on the other one.
Snow Leopard is one of the Apple operating Systems (OS X) as opposed to iOS -
Dashboard link is not working from BI Publisher
Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.
Please somebody guide me.
Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
Thanks,
Vara -
APPLE SENT ME AN E-MAIL WITH A LINK TO RENEW MY ONE TO ONE SUPPORT. THE LINK DOES NOT WORK. AFTER I LOG INTO MY APPLE ACCOUNT AND CLICK "RENEW NOW" FOR ONE TO ONE, AN ERROR MESSAGE APPEARS SAYING "PAGE NOT FOUND". AMAZING. WHEN I TRY TO CALL THE TOLL FREE APPLE SUPPORT NUMBER FROM MILAN, ITALY WHERE I AM NOW LIVING, IT DOESN'T WORK. THE ITALIAN SUPPORT DESK APPEARS TO BE AVAILABLE ONLY ON WEEKDAYS DURING NORMAL BUSINESS HOURS. HOW CAN I REACH A LIVE APPLE SUPPORT PERSON?
Start by going here - https://expresslane.apple.com/GetproductgroupList.action?locale=it_IT
Best of luck. -
A/R Invoice linked object not working all the time
I have a LinkedButton that is set to SAPbouiCOM.BoLinkedObject.lf_Invoice. When the selected A/R Invoice has a Document Type of Service the link works. When the selected A/R Invoice has a Document Type of Items the link does not work and I get the following error:
"No matching records found 'A/R Invoice' (ODBC -2028)"
I there another property that I should be setting? I could not find anything.Hi,
I've added a code sample that works fine for me.
add this code to a simple vb project with the correct references....
1. Enter a number of the Invoice you want
2. click on the second EditText to set the linkedButton
3. click the LinkedButton
<i>Public WithEvents m_App As SAPbouiCOM.Application
Private Sub Class_Initialize()
Dim oForm As SAPbouiCOM.Form
Dim oDBDS As SAPbouiCOM.DBDataSource
Dim oItem As SAPbouiCOM.Item
Dim oLB As SAPbouiCOM.LinkedButton
Dim oST As SAPbouiCOM.StaticText
Dim oET As SAPbouiCOM.EditText
Set m_App = getCurrentApplication()
' m_App.MessageBox "You have COM UI connection"
'form
Set oForm = m_App.Forms.Add("UUID")
oForm.Height = 150
oForm.Width = 400
oForm.Top = 100
oForm.Left = 400
Set oDBDS = oForm.DataSources.DBDataSources.Add("OINV")
'Edittext
Set oItem = oForm.Items.Add("EditT", it_EDIT)
oItem.Left = 200
oItem.Width = 40
oItem.Top = 50
oItem.Height = 15
Set oET = oItem.Specific
Call oET.DataBind.SetBound(True, "OINV", "DocNum")
'static
Set oItem = oForm.Items.Add("StaticT", it_STATIC)
oItem.Left = 50
oItem.Width = 100
oItem.Top = 50
oItem.Height = 15
oItem.LinkTo = "EditT"
Set oST = oItem.Specific
oST.Caption = "Business Partner Code"
Set oItem = oForm.Items.Add("EditT2", it_EDIT)
oItem.Left = 200
oItem.Width = 40
oItem.Top = 80
oItem.Height = 15
Set oET = oItem.Specific
Call oET.DataBind.SetBound(True, "OINV", "DocNum")
Set oItem = oForm.Items.Add("StaticT2", it_STATIC)
oItem.Left = 50
oItem.Width = 100
oItem.Top = 80
oItem.Height = 15
oItem.LinkTo = "EditT2"
Set oST = oItem.Specific
oST.Caption = "Business Partner Decs"
'linked button
Set oItem = oForm.Items.Add("Linked", it_LINKED_BUTTON)
oItem.Left = 180
oItem.Top = 50
oItem.LinkTo = "EditT"
Set oLB = oItem.Specific
oLB.LinkedObject = lf_Invoice
oForm.Visible = True
End Sub</i>
Regards,
Yaniv G.
SDK Consultant,
SAP Manage Israel. -
I have updated my firefox to version 15.0. After this I have the effect that at some unspecified time during use many of the functions stop working. Menu's do not open, download links do not work anymore and so on. Opening new tab's or windows still works. Links on pages partly work partly not. Copy and paste does not work anymore on webpages. It takes ending the firefox process and restarting to correct the issue until it happens again. I have those effects on totally different webpages. At this time it happens every time after I start Firefox but not right away. Firefox first works for some time and then it suddenly doesn't anymore without me having done anything special
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
Link is not working for one role. how to check please guide.
Hi Expert,
I have a simple question but as don;t aware of some of the techincal area not able to understand where to check.
I have a link under document flow in offer( opportunity) where for one role sales support user the link is not happening. I have checked for other role its working fine.I understand that for this role the link will not work as per the role maintianed.
But where this link got maintained and how i will be able to check which link is tagged to which profile.
rolewise mappeing with link.
Please guide.
Prem.Hello Prem,
Please check the navigation bar profile from your business role.
Then go to the navigation bar profile settings, you can find the details settings there.
If it is a link under some work center, you need to start from the work center.
If it is a direct link, then start from the derect link group.
Hope this could be helpful.
Best regards,
'Maggie -
I want to import bookmarks from Explorer and I go to File Tab and the IMPORT link is not working or not illuminated?
Make sure that you not run Firefox in permanent [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode" -
I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.e
I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply
-
This link is not working. Please if you can access this l...
this link is not working. Please if you can access this link send me the text from it (as an attachement by email)
Is the SQL being passed to Access valid for Access:
SELECT Orders.*, Tickets_detail.OrderID2 AS T2, Tickets_detail.Price, Tickets_detail.ticketname FROM Orders JOIN Tickets_detail ON Orders.OrderID = Tickets_detail.OrderID2 WHERE EventID =24 AND AuthNetCode =1 AND OrderType IS NULL ORDER BY orderID2 DESC
(that's from your error msg)
Can you run that on Access?
I suspect the JOIN syntax might be different.
Any reason why you're running SQL Server on live, and Access on dev? You're making a bit of a rod for yourself there.
Adam -
In P6 P6 Help link is not working
Hi,
My P6 help link is not working in help menu.
P6 Library and Support link are working.
As suggested in another discussion i tried to update link in Admin>Application setting and restarted weblogic, But system is still taking some other link than i defined in application setting.
Can anybody help?Hi,
We worked on this issue ,
Solution:
In the P6 EPPM Admin application in the corresponding configuration, In P6 Help url we have modified the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/ and we restarted the P6 server in weblogic console.
Then everything fine now,
Regards
Kumar -
The figure links are not working
The figure links are not working in the latest ADE 4.0.3. The same ePUB figure links are worked perfectly in ADE 3.0.
Your navigation is covering some of your links. You should send the image to the back & or crop it to just the red box.
How I create navigation menus:
http://jeffnitschke.com/Video.html -
When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.
I have not changed any of my preferences and they look like they are as I would have left them.
I tried resetting Firefox and deleting the preference file, no change.
By the way, I hate that the tabs are on top and not where they belong above the pages they are for. There should still be a way in Firefox to put them back without having to use an add-in.
Maybe you are looking for
-
OS X 10.9.2 Maverick + update failure
I Movie update - 10.3 will not install I tried 3 times Any advice- please ??? KLS
-
We enter the parameters in f_53 after select process open item button below some buttons is there Ex item buttons (2) discount buttons(2) is there that buttons is deactivate mode plz tell how activate that buttons plz urgent
-
Secured sites are not showing that little padlock on the bottom right corner,like the old version of firefox did, indicating its a safe site, example banking,emails etc etc.not sure weather im safe or not please explain.
-
Getting a black screen when publishing in Captivate 4.
I am getting a black screen when publishing in Captivate 4. I have noticed patches that care for this with later versions, but is there something available for version 4.
-
Switching from local to central SLD
I installed the ESS business package with a local SLD. Now there is another SLD server we need to use (a central SLD instance). Can we switch easily from an existing local SLD instance to a remote SLD instance? Tiberiu