5508 pair show "Down" as data sources for Netflow

I've setup my 5508s to monitor and export netflow to Cisco Prime Infrastructure but no data populates in the expected tabs. When I check Admin-> Data Sources they show up as "down", while other netflow exporters (ASA1000s I used to test) show as "up". I verified in the WLC CLI that they are exporting flows. Thoughts?
WLC show flow exporter stat:
Exporter-name: CiscoPrime
Total Flows Sent: 69536
Total Pkts Sent: 4021
Total Pkts Dropped: 0
Last Sent Time: Thu Aug 15 15:24:29 2013

Hi Marcin,
You are most welcome my friend I think the great NetPros in this thread
offer some excellent tips and strategies for this plan as well as the restrictions
you will encounter moving forward. You will likely want to make the 5508 the
primary controller with an eye on moving away from the 4400 at some point
due to it's EoL and inability to run the latest code versions.
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Similar Messages

ODS as data source for the next ODS - can't see the name in the DS list

Hello, experts!
Need your help. I'm trying to use Staging ODS for the transaction data to populate data into next level of ODS - Standard ODS. The problem is that Staging ODS does not appear in the Data Source list for the Standard ODS when I Assign data sources(and would not let me paste the Staging ODS data source name either). I did Replicate data source for the Staging ODS and Generate Export data sources but it did not fix the problem.
Any suggestions?
Thank you.
Alina.

OK, you're talking about the selection screen "Available datasources" showing only 50 entries right?
In my system the screen can show more than 900... must be one of your user settings in the gui...
just under the tab "restrictions" there is a line with an arrow pointing down; click this line to expand the restrictions...
In the DataSource field enter 8* or 8<ODS_TECH_NAME> in order to see your DSource.
Otherwise in RSA13 in your Dsources overview, right click it and "assign infosource"; it will also make it...
hope this helps...
Olivier.
Edited by: Olivier Cora on Jul 30, 2008 6:31 PM

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Using Oracle BI Server as a Data Source for Third Party Tools

I have been researching how to use the Oracle BI Server as a data source for two days now. I have not yet found a solution to my problem.
We have a remote user who is pulling data from one of our Oracle databases using automated tools. This data base is essentially being replaced by Oracle Analytics. However, we do not want this user to get at the physical tables of Analytics, rather, we want the user to be able to connect to the Oracle BI Server itself, and issue Logical SQL to pull data.
Here are the requirements which I need to be fulfilled:
1) The ability for a remote user to connect to the BI Server as a data source.
2) The remote user must be able to do this on a Unix box.
3) The remote user must be able to automate the process of issuing SQL to the BI Server. (Command line interface is preferable)
4) The solution needs to be easily implementable, that is, this solution will be implemented many times over.
I found many articles explaining how to set up a Windows box to connect to the BI Server in this way. However, these articles outline how to use tools like Excel and Microsoft Query to pull data from the BI Server. Our current user is using SQLplus.
If possible, I would like the user to continue using SQLplus as the tool for connecting to and retriving information from our BI Server. I have tested using SQLplus many different ways to no avail. I have also tried using other tools, such as Oracle SQL Developer.
Is there a program out there that will fulfill the needs I have outlined above? Or, does someone know of a way to use SQLplus to connect to the Oracle BI Server as a data source? Or, is there a series of solutions which will fulfill the needs outlined above?
Edited by: user11177366 on Jun 11, 2009 11:46 AM

I agree it would be inefficient but only because you are using OBIEE for something it was not designed to do. You are basically asking for a "DB feed" and that should designed using PL/SQL, DB Links, Web Services or whatever is your entreprise standard to send data from one system to another. Using OBIEE for this seems a bad architecture decision to me.You are correct, the BI Server is not really intended to be queried like another Oracle Database remotely. However, the reason we are trying to do it this way is twofold:
1) We want to enforce data level security.
2) The BI Server has been fine tuned for high performance.
Forcing the end users to go through the BI Server rather than directly to the physical tables or other sorts of systems built on top solves both of these issues.
I think you are wrong. I don't see why SQLPlus should be able to query the BI Server. The BI Server can sit on top of many different DBs not just Oracle, even flat files etc. So you can't really expect the BI Server to able to translate all that into Oracle SQL output so you can query it using SQLPlus. The BI Server is not an Oracle RDBMS.You're right again. The BI Server isn't an Oracle RDBMS, and I have been wanting to treat it like one. From the data I have gathered SQLPlus can't query the BI Server.
However, my research has led me to realize that the BI Server supports the JDBC API. Therefore, (I should have went down this route in the first place) one can use the JDBC driver provided by Oracle (bijdbc14.jar) to interface with the BI Server. There are many programs and applications out there that support the JDBC API and let us connect to BI Server the way we want to. Furthermore, these programs are mostly platform independent, as they are mostly written in Java.
Lastly, from what I understand the NQCMD program can be installed on any platform as well (provided by Oracle). This is another option to connect to the BI Server as well.
Thanks for your help and your comments as I went through this process of discovery.

Using Oracle Stored Proc as Data Source for PowerBuilder Data Window Object

Hi,
I'm trying to use an Oracle stored procedure as the data source for a PowerBuilder data window object. I'm using the following (which is a variation of an example given on Sybase's web site, with the appropriate database/column name changes and use of %TYPE):
======================
CREATE OR REPLACE PACKAGE pkg_dw_sp_example
AS
TYPE typ_example_rec1 IS RECORD(
v_comcodsa st_sa.comcodsa%TYPE,
v_comnamsa st_sa.comnamsa%TYPE,
v_cocitysa st_sa.cocitysa%TYPE);
TYPE cur_example_cur1 IS REF CURSOR;
RETURN typ_example_rec1;
END;
======================
CREATE OR REPLACE PROCEDURE sp_dw_example1
(arg_teamid IN st_sa.comcodsa%TYPE,
cur_team IN OUT pkg_dw_sp_example.cur_example_cur1)
AS
BEGIN
OPEN cur_team FOR
          SELECT comcodsa,
          comnamsa,
          cocitysa
          FROM st_sa
          WHERE st_sa.comcodha = arg_teamid;
END sp_dw_example1;
======================
The package is created okay, but the procedure is saved with compilation errors. Unfortunately, Oracle does not indicate what the errors are (great product), so I have no idea what it is complaining about.
Questions:
1) Can anyone point me to/or provide a better example?
2) The examples in books I have seen all would have declared the procedure in the package specification - is the above valid?
3) This is a PowerBuilder specific question, but if the package does not show up in the stored procedure list when creating a data window object, how does one use it as a data source?
Oracle 8.1.7
PowerBuilder 8.0.1
Thanks,
Ed Holloman

1) Everything looks fine with your code. You did not mention the environment you are compiling your code in, but if it is SQL*Plus, you can type 'show errors' after the compile and it will list the errors and line numbers for you.
2) You can include the procedure in the package - in which case you would have a procedure declaration in the spec and the actual procedure in the body. You would no longer include the 'create or replace' - the declaration and procedure would just start with 'procedure'. The spec would look include:
PROCEDURE sp_dw_example1
(arg_teamid IN st_sa.comcodsa%TYPE,
   cur_team OUT cur_example_cur1);Note the removal of the package reference (since we are now IN the package) and the second parameter is just OUT instead of IN OUT.
3) Not much, but I know that in PB8, our developers have said they have visibility now to the package when creating a DW - something they didn't have in PB7. Previously, we had to create a dummy standalone procedure that they would select and they would later modify the code to include the package prefix.
Hope this helps a bit.

Data Source for reused bounded task flow

Hi,
I am using JDeveloper 11.1.2.4.0.
I have a project from which I exported a bounded task flow to be used in other projects.
When I include that bounded task flow in a separate project, its data source does not appear in the Databindings.cpx of the project in which it is reused.
How will the data source for the reused task flow be set in the separate project?

I have a project from which I exported a bounded task flow to be used in other projects
By that you mean that you have crated a adfLibrary from the the task flow?
When I include that bounded task flow in a separate project
By that you mean you have added the adfLib created above to the other project from the resource palette, right click and 'add to project'?
How will the data source for the reused task flow be set in the separate project?
Once you have added the project you refresh the data control and the other task flow should show up.
Timo

Data source for this data connection isn't registered for Power BI

Hi, I am getting this error when I set Schedule Data Refresh to refresh data from db. How do I register my connection to the data source? Is this a fix on SQL server or Power BI?
FAILURE INFORMATION
Failure
Correlation ID: c5132b7a-3c54-4f12-a048-3ddcf0b95f26
Data connection Status
SqlServer twcperfsql1 OfficePerf OnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Tell your Power BI admin the admin needs to register this connection to this on-premises data source.
Thanks for your help.

I'm running into the same issue, I did configure the Gateway and then the data source in Power Bi.
When I go to the Power BI Admin Center and click on "Test Connection" it seems to be working. But when I refresh the data from Power BI it doesn't work. Now if I edit the spreadsheet in excel and refresh the data in PowerPivot then it works. So
not sure why the solution doesn't refresh from the automated service in Power BI without this useless error.
Thanks
Fabian
In case it helps this is the actual error:
Failure Correlation ID: ecc73a16-7264-45b2-9baf-e3448f007211
Power Query - dbo_TableAOnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Ask your Power BI admin to register the data source in the Power BI admin center.
Also further information I have found so far is that the Gateway is receiving the requests for the refresh and it shows the message below, so the data source is found and communication seems to be happening from server to client and back, not sure why server
doesn't seem to like the data the Gateway is sending back to server.
The feed 'dbo_TableA' was successfully accessed at 7/15/2014 4:23:26 PM.
The request took 00:00:00.0000105 seconds.
Activity ID: e8464e5d-3f0a-49c2-b10b-450fec3e5940

Data Source for 0CANC_DATE

Hi Experts,
I Cannot find any data source for 0CANC_DATE.
¿Can anyone please help me with this?
Thanks!
Artur.

You must be having IDES system with you .
Please find the steps .
GO to business content and install the 0CANC_DATE .
And install the Data flow downwards .
Then it will show all the datasources involved .
Assign marks is the best way to appreciate help

InfoProviders versus Queries Data Source for BO SAP Integration

Hi All,
I would like to know if there is any discussion or suggestion on commonly used choice of data source for BO with SAP Integration. I do know there is a best practices suggestion from Ingo on Webi and the choice is to use queries so that we could leverage the functionalities of calculated key figures, exit variables and etc. But as I see from another website it claims that this will slow down the access of data using queries.
Thanks
David

Hi Ingo,
Is there any slide presentations from anyone that has that kind of information? We are in the midst of implementation right now and are selecting the method. I need to come out with pros and cons of the choices that we have in order for us to select the best one even though from my gut feeling I would still prefer the Queries.
Especially it will also make use of aggregates and also data flow size might be fewer due to variable that exists. Compared to using MultiProvider, it might transfer the whole data lot and if we were to create parameter there in Crystal or something else it will filter data only from there onwards.
Please correct me if I am wrong.
Thanks
David Yee

Universe as data source for Crystal Reports

Are there any issues in using a Universe as the data source for a crystal reports? We are using Business Objects Enterprise XI R2 and Crystal Reports XI R2.
Thanks in advance for your response,
Garet Wicker

Hi,
We can have a parameter from a Universe, following are the steps which will create the report which is based a Universe with a parameter.
-connect to the universe and you will a Query Panel.
-drag some objects in the Result Objects field. Ex. Country, Revenue.
-then drag an object in the Query Filter. Ex. Country.
-then a new window will appear as Filter Editor.
-Select the prompt option and also select the check box as u201CSelect only from listu201D.
-Click on Ok.
When you refresh the report then there will be a parameter prompting for the Country field. Also you will see a parameter created automatically in the parameter list.
However if you try to create a new parameter (without modifying anything from the query panel) by with the following workflow then there is no option to select the field for the parameter.
-Right click on Parameter fieldsu2014New parameter.
-When you click on the drop down list in the u201CValue Fieldu201D list there are no available fields/objects.
Hence we can create a parameter in CR which is connected to the Universe with the steps mentioned above.
I hope this helps you.
Regards,
Prashant.

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Creating Data Source for Variant Configuratior characteristics.

I'm trying to create a data source for material classification that is using the Variant Configurator. In transaction CTBW I'm using the following:
- Basis datasource = 0MATERIAL_ATTR
- Client 150
- Class Type 300 for Variants.
- Obj Table = MARA
- Data Source Type = ATTR
I then get the following error messeage:
"Object type is not a sheet type in the class type".
Dose any one understand this message or how I should create the datasource for this classification?
Thanks for your help.
Denny

Thank you very much for your response. Can you tell me how you found this explanation of this error? I tried searching OSS and did not find anything.
Ok, so since 0material can have multiple values I cannot use CTBW to extract the values.
My company is using the variant configurator on a material number 'EXTND_WARRANTY' in R/3. This material is defined as a configurable material. The Class is 'ZEW_SOFTWARE' with the following characteristics:
-Material Number
-License Key
-Maintenance Length
-Coterminous Enddate MM/DD/YYYY
In BW reporting we need to show the material 'EXTND_WARRANTY' with the value of the characteristic Material Number.
Can you tell me how I can accomplish this?
Thank you.
Denny

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

5508 pair show "Down" as data sources for Netflow

Similar Messages

Maybe you are looking for