5508 WLC going to the 11ac level, any issues running ver 7.6.120?

We do have 3850's to use. Do they have to be mobility members to the wireless system? or will the LAN base work for the connections?

The 3850 must have IP Base or IP Services to terminate Access Points in a Converged Access wireless network.  If you are running a non-converged access network then you can use your 3850 to connect access points to the network like you would any other switch.
You must also have RTU licenses for each AP you want to connect to your 3850/3650 switches.
7.6.120 is non-converged access code so I am assuming you want to do the latter.
John

Similar Messages

  • I started to rebuild one secondary server ,at the middle it is freezed. Prerequisite is passed, downloaded the bootstrap without any issues.

    I started to rebuild one secondary server ,at the middle it is freezed.  Prerequisite is passed, downloaded the bootstrap without any issues.
    In configmgrsetup.log file it showing NFO: The SQL Server Express installation command is:<"C:\VSCC9NLZ.TMP\SMSSETUP\BIN\X64\SQLEXPR_x64_ENU.exe" /Q /ACTION=install /FEATURES=SQL( Here is freezed), after
    that there is no error, nothing happening. I checked this log file nothing happening after 24 hrs also.

    More info:
    Please refer to the link below:
    How to Install Secondary Sites in System Center Configuration Manager 2012
    http://richardbalsley.com/how-to-install-secondary-sites-in-system-center-configuration-manager-2012
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Passing data from a subvi to the top level with continuously running loops

    Hi All,
    This is a very simple question, for some reason the data available at a subvi indicator is not making it to the top level vi. I think it might be something to do with the while loop I am using but I cant figure it out, any help will be appreciated. I don't think I fully understand how the data gets out of a continuously running loop.
    GPSdisplay runs a driver called GPS.vi (im not worried about my event structure just yet which might be wrong, but I am yet to test that bit yet) Probe 1 should have the values from GPSCluster
    Loop within GPS.vi. GPSCluster (Probe 2) is being updated correctly
    I cant work out why the data is not being passed to GPSCluster in the top vi
    Solved!
    Go to Solution.

    Hi bennymacca,
    I think you are on the right track with an FGV. You can do this fairly easily with the GPS vi that you have.
    Before I go any further, your GPS while loop will only return the last reading, and because the "Read" boolean output state is FALSE, it will not stop. Do you see it exit at all? From the logic I read, once entering this while loop it won't stop until told to.
    There are a 3 options you can try.
    1) Use an FGV, as you are looking into. To do this you will need to change the state boolean to TRUE and put shift registers in for the GPSCluster - to parse the information around, holding it each time the vi is called and exited. Outside the while loop you will wire up the Cluster to the indicator that you wish to collect (OR, you could have it inside the case statement where it is read - be careful here, though). 
    2) in the main code, above the sequence frame you can place the GPS vi while loop (the "Read" one), having the state boolean wired to a Stop button local variable. This while loop will start depending on how LV feels, so wire an error line to both the While loop and Frame start (indicating that both are to run in a parallel fashion), OR you can put it in a case statement and say 'go' when you want to start reading. With this while loop, you can then output the Read data directly into your Cluster variable as it is generated.
    But, with (2) you are moving yourself away from the purpose of the GPS vi, which would be to bring all functionality of the GPS functionality into one sub vi - which is a good idea.
    3) put a condition on the "Read" case statement boolean state - only make it TRUE when you wish to stop reading data (do you have a time or condition you can refer to here?). Even doing so, you would/may still need shift registers on your while loop to retain data for each iteration.
    I hope all of that helps. Cheers. David.

  • Running Production Premium CS5 & CS6 on the same system / any issues ?

    Still not sure which way to go with the CS6 upgrade, non-Creative cloud version.. 
    Run both on the same system or uninstall CS5 first.. 
    Prefer not to slow down the system but CS5 is running perfectly now..  
    Anyone tried both at the same time ?
    How is opening existing CS5 projects with CS6, this is a concern for me & why I might like to have both installed on the same system ?

    Having installed CS5, CS5.5, CS6 and CC is no problem. They are separate installs.
    Moving projects from CS5 --> CS5.5 --> CS6 --> CC is no problem.
    Moving projects from CC --> CS6 is not possible.
    Moving projects from CS6 --> CS5.5 can be problematic.

  • I recently found my Ipod touch 1st generation and was trying to erase all the content on the ipod.  It now won't turn on at all, it looks like it is working but it just never goes to the homescreen.  any ideas?

    I have tried connecting it to the computer and that doesn't seem to work either.  At this point I do not know what else to do.  Can anyone help me get this Ipod touch fixed?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Does Firefox 25.0.01 have any issues running Lumosity games?

    I am running Firefox 25.0.01.
    At times my direction arrow keys do not work in Lumosity, when depressing the key, Lumosity does not respond, this is only happening on my DeskTop, my Laptop also runs Firefox 25.0.01, yet it experiences no problems. Any complaints along this line?
    This problem has started in just the past two weeks (Nov. '13.) Lumosity suggests that I run Google Chrome as a potential fix. I don't like Google.

    Not sure this is helpful to you at this point, but here is Lumosity's support article for anyone finding this thread: [https://help.lumosity.com/entries/24485295-Arrow-keys-are-unresponsive-in-Firefox Arrow keys are unresponsive in Firefox : Help Center].

  • Any issues running Adobe CS5 & CS6 on Mac OS X 10.9 ?

    I'm looking upgrading to Mac OS X 10.9 (Mavericks) from Mac OS X 10.6.8, both on on iMac & MacBook, just want to know, anyone has found upgrading to Mavericks creates problems for running Adobe CS5 and CS6 applications....?

    If you depend on any pre 2006 application, it will not work without this
    https://discussions.apple.com/docs/DOC-2295#ROSETTALION

  • HT1651 Any issues running MacOS v10.7 with Lightroom 5?

    For Mac Book 2.1 (mid 2007)
    Adobe stated upgrade to :4 GB of Ram must i replace existing to pair 2gb for best performance (2 gb each)
    What is the available HD space i need 2GB...if i don't have it can i upgrade 1024x768 display

    Welcome to Apple Support Communities.
    I can't help directly with OS X 10.7 and Lightroom 5 requirements, but I can point you to specs for your mid-2007 MacBook 2,1:  http://support.apple.com/kb/SP18
    While it can HOLD two 2GB RAM modules for a total of 4GB RAM memory modules...
    the design of the mid-2007 MacBook limits the system so can only address 3GB RAM. There is no way around this limitation.
    The native LCD screen resolution is 1280x800. The Video RAM is fixed at 64MB. The video chipset is Intel GMA 950 There is no way to expand Video RAM or upgrade the chipset.
    In my opinion, rather than spend much money to upgrade a 6-year-old mid-2007 MacBook, I'd invest the money toward a newer model used or refurbished MacBook or MacBook Pro with the ability to use at least 4GB RAM, a newer-generation processor, and a newer more capable video chipset.
    For example, the 4-year-old base Mid-2009 Aluminum Unibody MacBook Pro 2.26Ghz offers better performance, holds up to 8GB RAM, an nVidia 9400M video chip with 256MB Video RAM, and runs cooler. My son just finished 4-years at college with his mid-2009, but he won't sell it to me and buy himself a new one---yet!
    Mid-2009 MBP specs here: http://support.apple.com/kb/sp541
    I'm still using my mid-2007 for many tasks, but high-end graphic-, video-, and photo-editing are not among them. (Yes, I'm saving up now to purchase a newer used/refurb MacBook capable of running OS X 10.8 Mountain Lion.)
    Message was edited by: kostby

  • Any issues running 3.3(4b) Fabric Manager on 3.3(1c) switches?

    I'm doing a little pre SAN-OS upgrade work (and changing out my FM Server backend DB from Postgres to Oracle 10g) and I see that the clone option is back (finally) in 3.3.(4b) fabric manager.
    We've run newer versions of Fabric Manager before, ran 3.1.x on a 3.0.x fabric for a while so I'm just wondering if I could upgrade my production management FM server (not just data collection but management) from the current SAN OS to a newer one before I install SAN-OS 3.3(4b) on my switches?  It should be backwards compatible but . . . just wondering if someone else has the scars from this sort of activity.

    Yeah that's the answer I'm getting from Cisco too.  We've had some real flakey behaviour at odd times lately (zone sets that are inserted into the active zoneset but disappear when you try to activate, zone set renames that dont' take etc.) which all seem to be Java issues (i.e . it's slow and flakey and you're rdp'd to the FM server so that's in there too.)  But we need to redo the FM server anyway and thought I'd make sure it was o.k. to upgrade at the same time.

  • Cannot implment security setting on the report level - SSRS 2012

    Hi All:
    I am having a weird problem on my SSRS 2012 reporting portal, I cannot click any of the drop down list like the example below. Is there anything from the setting?
    It is not only about the reporting level, any arrow on the reporting server, like data source, are kind of dead as well.
    Please kindly help and thanks in advance.
    Cheers
    Johnny

    Hi JohnnyKahWang,
    According to your description, you can view folders and reports on report manager, but you could not click any of the drop down list.
    Reporting Services uses role-based security to grant user access to a report server, and there are two types of roles: Item-level roles and System-level roles. Access to reports, folders, models, shared data sources, and resources is controlled through item-level
    role assignments. Each user who requires access to a report server must have at least one item-level role assignment. On a new installation, only local administrators have access to a report server. In this case, a local administrator need to create a role
    assignment which has Manage folders and Manage reports task to the account by following steps:
    Click Home at the top of the page to open the Report Manager home page.
    Click the drop-down arrow next to the folders and reports.
    Click New Role Assignment.
    In Group or user name, specify the name of a group or account.
    Select a role which can perform Manage folders and Manage reports tasks.
    Click OK to save the role assignments.
    For more information about Setting Item-Level Permissions on a Report Server, please refer to the following document:
    http://technet.microsoft.com/en-us/library/aa337471(v=sql.105).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • 5508 wlc with 1142 wap

    I am wanting to know about methods of getting a wap to join a wlc.  I’ve got 5508 wlc’s and the wap’s are the 1142’s.  Are there other methods of getting wap’s to join wlc’s other than option 43 of dhcp?  Also,  is it possible to get a wap to automatically join a secondary controller if the first one it is trying to join is full?

    The wap’s do not seem to be finding the other controller when being added.  They just look for one controller only and do not attempt to find the other.  Also, on the wap’s, when you enter the primary and secondary controller on the controller admin site.  It does not move the wap’s to the other controller as primary.  The secondary controller has 11 wap’s to go before full.  The primary controller is full 

  • Is 1252G AP compatible with 5508 WLC

    hi,
    I want to know whether 1252G AP can register with 5508 WLC? from the datasheet 5505 support CAPWAP while 1252 is LWAP. Kindly provide the link regarding the compatibility as well.
    Regards
    Nareh

    hi,
    I would also to add that I will be using CAP 1552E (802.11N) outdoor AP with the 1252G AP. Is it possible that both LWAP and CAPWAP AP registers with the same 5508 WLC ?
    Regards
    Nareh

  • How to get the nber of POs at the item level?

    Hi all,
    I am running BI 7 and SRM 5.5. I am using the standard PO History cube.
    I have a report where I filter on items values only (no header) since I want to report by - let's say - product category.
    In my char part, I will have: Date | product category
    In the KF part, I have: Ordered Amount | Nber of POs
    In the flow, PO amount is stored at the item level while the nber of POs is stored at the header level. By running the report, I get the ordered amount information but 0 for the nber of POs.
    How could I get the "Nber of POs" information in my case? Maybe it is not that easy (looking the following example).
    PO1 - Item 10 - Product Category A
    PO1 - Item 20 - Product Category B
    PO1 - Item 30 - Product Category C
    PO2 - Item 10 - Product Category D
    PO2 - Item 20 - Product Category A
    PO2 - Item 30 - Product Category A
    Here I would be happy to have:
    Date | Product Category A | Amount | 2 (PO1-PC A + PO2-PC A)
    (but how BI knows that we are dealing with 2 POs?)
    Thanks in advance - chris

    Hi
    Check whether counter infoobject Number of items is availbale in MCEKPO ,if so just drag into left side and do this enhancement for 2LIS_02_ITM.
    Create  a number of item field in the cube and update with value 1 referring the Item number
    In query it may reduce query runtime performance
    This will just update 1 for every instance of item and you can aggregate them in your query whatever level you require
    Regards
    N Ganesh

  • Can't put two 5508 WLCs in the same RF group

    Hi experts,
    I have two 5508 WLCs and I want them to be backup to each other. I put in the same "RF Group Name" and even the same "Default Mobility Domain Name" however under Wireless -> 802.11b/g/n -> RRM -> RF Grouping each controller still only have themselves as the only memter to the group.
    Two controllers are having management IPs on the same subnet 192.168.161.x/24. AP-manager interfaces are in the same network as well. They can ping each other fine. The following screen shots show the current relavent config on the controller:
    I do have two controllers in the same mobility group and they are both showing up...
    Does anyone know why they can't add each other to the RF group? All other settings are pretty much default...
    Thanks!

    Hi,
    is there a chance that one of the 2 WLC doesn't contain any access point ? Or that the APs from one WLC are not physically close to the APs of the second WLC ?
    The point of RF grouping is to exchange RF information, to make RRM decisions together and to know what ap is a rogue and which is not. RF group information travels over the air from AP to AP.
    So if a wlc has no ap of if its APs are not close to those of the other WLC there is both no point in grouping with the other WLC in rf group and also no technical way of doing so.
    Regards,
    Nicolas
    ===
    Don't forget to rate answers that you find useful

  • Quite often when I plug in my iPad 2, iTunes goes to the "Set Up Your iPad" screen and makes me restore it. Any way to stop this?

    I have had my iPad 2 since the start of June 2011. There are a lot of times when it works great, but I have had trouble sometimes when I sync. Prior problems were with SQLite3.dll, but got help copying that file to the right place. I have also completely uninstalled and re-installed iTunes. However, my biggest problem is that sometimes when I plug it in to sync with iTunes, it automatically goes to the "Set Up Your iPad" screen. It only allows me to set it up as a new iPad, or restore it from a backup. This is happening more and more. So much so that everytime I plug it in and it actually does work, before disconnecting I will right click on the iPad on the left hand bar and do a backup. This is really starting to get on my nerves. I'm not doing anything out of the ordinary with my iPad. Just playing some games and having a few other apps. It's so hard when playing some games like Angry Birds, getting 3 stars in all levels, only to plug the iPad in again to sync and have to restore it and lose all progress! Does anyone know why it goes to this screen? It doesn't happen all the time, but I'd say once every 4 times I connect. Also, I'm using Windows 7, and yes, all windows updates are done, and iTunes always is on the most up-to-date version. Thanks for any help!

    Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
    Have you thought about turning auto syncing off?
    Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
    This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
    BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

Maybe you are looking for