5530 XpressMusic problem with WH-205 stereo speake...

hello, i'm a new owner of this mobile phone but i have problem with (i guess) wh-205 stereo speakers i got with it.
well, the problem is that when i plug them into 3.5mm jack, the sound is wierd, music is disordered and i can barely hear the voice of a singer. but when i press and hold that remote button on the speakers, the sound is awesome. but as soon as i let it go, it becomes wierd again.
why is that happening? i tried "headset", "headphones", "music stand" option but it's the same. is it something wrong with my speakers?
i hope you'll help me out with this, after all this is xpress music phone.

Hello everybody. I bought a new nokia set e72 with my hard earned money and i only used it for two days and its giving me some problems, Im so down.
The problem is when i insert the WH205 HEADSET ,its bit loose ,i tried to insert it deep but i guess it doesnt go and when i move it ,it gives me voice sometimes at left ear side and sometimes at right ear side.
Also during this it restarts as well. I did a soft reset and hard reset as well. and i also saw some other discussions here to put it deep ,i tried but i think it doesnt go more into it.or may be thers some hardware fault.
I also checked my firmware update,,its not yet available at it. Can some body please tell me how to insert it or show me some pictures or some video,so tht i get some courage to apply more pressue,though i did but it feels like i might break soemthing inside.I tried to use the mic of the headset but it doesnt work also. I received a call. I was hearing the voice form other side but the other person wasnt hearing my voice.
Kindly help!!
Regards

Similar Messages

TS1630 i am having problem with my iphone 4S speaker. apparently, i can hear ringtone and alarm, but i cant seem to play music on speaker. HELP!

i dont know what happened to my Iphone. I cant play music on speaker anymore. and when i pressed on volume up and down buttons there is no show of increased or decrease sound. i need help. but i can listen to music and adjust the sound while i m on earphone. and i can hear ringtone, alarm and all. just the problem with playing music. THANKS!

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.

Help - problem with white iphone 4 speaker

Hi, i have a problem with my white iphone 4 speaker. I know the specs stated that the mic is supposed to be on the left and the right is the speaker but i've compared at least 2 other black iphones 4s and there is some volume from the left side (if you close the right side) whereas mine is practically non-existent. Should i be concerned? Is this specific to the white iphone 4? The local telco has not been helpful - they can only reformat the phone and said that this is a software problem. Anyone with similar experience pls share. Thanks in advance.

irene sim wrote:
Hi, i have a problem with my white iphone 4 speaker. I know the specs stated that the mic is supposed to be on the left and the right is the speaker but i've compared at least 2 other black iphones 4s and there is some volume from the left side (if you close the right side) whereas mine is practically non-existent. Should i be concerned? Is this specific to the white iphone 4? The local telco has not been helpful - they can only reformat the phone and said that this is a software problem. Anyone with similar experience pls share. Thanks in advance.
You already know the answer. ALL iphones, every single one of them, have but one speaker at the bottom. You have NO ISSUE at all with your speakers. None. Nothing is wrong. At all. No problem. None.

Problem with T7700 7.1 Speaker System

I'm currently having a problem with the speaker system named above. For no reason at all, whether I'm playing a game, watching a mpg or listening to mp3's, the volume on the speakers raises and lowers every few seconds for no apparent reason. This has been happening for a few months now. (I bought the speakers December 2003) I've ruled out the sound card (Audigy 2 ZS) because I've tried these speakers on two different systems. Any ideas what it could be or if you need any more info, please let me know. Thanks.

I can't read good, I didn't see your hardware. My mistake.
I reinstalled my drivers, and that seems to have helped. I think it may have had something to do with Windows XP SP2 or my onboard sound, I don't know for sure though.

AirPort Express -- having problems with music and stereo

Anytime I connect iTunes to my home theater system, the sound is very very quiet, and there is a slight "buzz, or humm" noise in the background, almost as though the Line out cable isn't connected all the way (obviously it is...). This system has worked when I first set it up, but now all of a sudden, it is having these problems...any suggestions or solutions? Thanks

I don't know what's going on inside the airport express, but I also loose various qualities of the sound when I'm streaming. Typically, if I have set my amplifier to apply some virtual surround mode using 4 speakers, two of them will go dead whenever I stream over the express unit. I tried using the mini-toslink out of the express, which changed nothing. I'd be interested in a technical explanation of what that thing is doing to the signal. A humm is typically a ground loop, probably more likely to come from within your home theater system. Can you try connecting the airport express line to another input channel on your audio system to check if it is a ground problem with the input you're currently using?

A problem with the microphone (and speaker) in Multisim

Hello
I want to use the microphone in Multisim, the only problem is that, once I double click the microphone, all the buttons are greyed out (I can't press them). I tried to change several things in the control panel, but it still doesn't work, and I really need it. What should I do?
By the way, only the speaker can convert the sound to a voltage signal, right?
Another thing, I searched and saw someone else had the same problem as I had, but it didn't help me.
Thank you

There is a situation where the Speaker component will not work depending on your hardware. Nestor explained this to me. What he told me is that if your sound card driver "controls all the sound, speakers, equalizer, etc... windows communicates to that driver in order to generate sound... this is the thing that is not supported in LabVIEW. LV controls sound devices that are directly controlled by Windows only"
This is how he explained it to me and I hope he doesn't mind me posting this, but I couldn't explain it better than he did. This may be what is happening in your situation where the speaker is concerned.
I do not believe, based upon Nestor's explaination, that there is much that we can do about this on our end. It all depends on your hardware driver and if that driver is doing what Nestor says then unless you change your hardware to something compatible (which I am not willing to do) then we are both just stuck with what we have. I could be wrong about this last statement, but that is the way I am understanding what is happening.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Problems with X-Fi Automatic speaker mute if headphones are plugged

Hi guys,?I?have a big problem since a few weeks. I?have activated the?two options under: if Headphones are plugged in (Switch to Headphone Mode and Mute speakers).Everything is working great if?i plug in my Headphones, the speakers are muted. But absolutely random, my speakers are turning on and playing the same sound i hear over my headphones. After a while the speakers will mute again. This is absolutely annoying because the X-Fi seems to ignore this setting from time to time. The Output Mode even stays at microphone. If i unplug the headphones and plug? them in again, it changes to headphone mode but my speakers are still playing only the sound quality changes and i can only hear sound from my front speakers and through my headphones at the same time. It can't be a lose wire or something because if a pull or push my cable or the connector at the front of my External Panel it stays the same. It makes no difference if i only activate the speaker mute option. I have a X-Fi Elite Pro, with the newest Windows XP Professional Drivers (checked them through Auto-Update and the Website).My sound System is a Creative T7700 7. Surround Set connected to the back of my X-Fi Card. My Headphone is connected to the front of the external X-fi sound panel. I'm german so i don't know the?true english names of the driver options.

Still no reply? Hey guys at Creative! I can't properly use my Headphones!!

Problems with OSS (ALC1200, one speaker only noise)

Hi, im trying to use OSS since a half year, but never got it up running. There is always only noise/scrappy sound on the right front speaker and on the same time on the right Headphone speaker. In OSS test it says ok when testing. Devices are /dev/oss/oss_hdaudio0/pcm0 when this occures the first time, and /dev/oss/oss_hdaudio0/spdout at the second time.
Card is the ALC1200 onboard-chip of the Asus P5Q. Its is recognised by alsa & oss as ALC888, and normally working in alsa.
ossinfo -v3 -a :
HD Audio play front /dev/oss/oss_hdaudio0/pcm0 (device index 0)
Legacy device /dev/dsp0
Caps: DUPLEX TRIGGER MMAP
Modes: IN/OUT
Out engine 1: 0/HD Audio play front
Available for use
Engine 2: 9/HD Audio play front (vmix)
Available for use
Engine 3: 10/HD Audio play front (vmix)
Available for use
Engine 4: 11/HD Audio play front (vmix)
Available for use
Engine 5: 12/HD Audio play front (vmix)
Available for use
Input formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Output formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Device handle: PCI82fe1043-0000:00:1b.0-au01
Related mixer dev: 0
Sample rate source: 0
Preferred channel configuration: Not indicated
Supported number of channels (min - max): 2 - 8
Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
HW Type: Not indicated.
Minimum latency: Not indicated
HD Audio play rear /dev/oss/oss_hdaudio0/pcm1 (device index 1)
Legacy device /dev/dsp1
Caps: TRIGGER MMAP
Modes: OUTPUT
Out engine 1: 1/HD Audio play rear
Available for use
Input formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Output formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Device handle: PCI82fe1043-0000:00:1b.0-au02
Related mixer dev: 0
Sample rate source: 0
Preferred channel configuration: Not indicated
Supported number of channels (min - max): 2 - 2
Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
HW Type: Not indicated.
Minimum latency: Not indicated
HD Audio play center/LFE /dev/oss/oss_hdaudio0/pcm2 (device index 2)
Legacy device /dev/dsp2
Caps: TRIGGER MMAP
Modes: OUTPUT
Out engine 1: 2/HD Audio play center/LFE
Available for use
Input formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Output formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Device handle: PCI82fe1043-0000:00:1b.0-au03
Related mixer dev: 0
Sample rate source: 0
Preferred channel configuration: Not indicated
Supported number of channels (min - max): 2 - 2
Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
HW Type: Not indicated.
Minimum latency: Not indicated
HD Audio play side /dev/oss/oss_hdaudio0/pcm3 (device index 3)
Legacy device /dev/dsp3
Caps: TRIGGER MMAP
Modes: OUTPUT
Out engine 1: 3/HD Audio play side
Available for use
Input formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Output formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Device handle: PCI82fe1043-0000:00:1b.0-au04
Related mixer dev: 0
Sample rate source: 0
Preferred channel configuration: Not indicated
Supported number of channels (min - max): 2 - 2
Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
HW Type: Not indicated.
Minimum latency: Not indicated
HD Audio play pcm4 /dev/oss/oss_hdaudio0/pcm4 (device index 4)
Legacy device /dev/dsp4
Caps: TRIGGER MMAP
Modes: OUTPUT
Out engine 1: 4/HD Audio play pcm4
Available for use
Input formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Output formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Device handle: PCI82fe1043-0000:00:1b.0-au05
Related mixer dev: 0
Sample rate source: 0
Preferred channel configuration: Not indicated
Supported number of channels (min - max): 2 - 2
Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
HW Type: Not indicated.
Minimum latency: Not indicated
HD Audio play spdif-out /dev/oss/oss_hdaudio0/spdout0 (device index 5)
Legacy device /dev/dsp5
Caps: TRIGGER MMAP
Modes: OUTPUT
Out engine 1: 5/HD Audio play spdif-out
Available for use
Input formats (0x00001410):
AFMT_S16_LE - 16 bit signed little endian
AFMT_AC3 - AC3 (Dolby Digital) encoded audio
AFMT_S32_LE - 32 bit signed little endian
Output formats (0x00001410):
AFMT_S16_LE - 16 bit signed little endian
AFMT_AC3 - AC3 (Dolby Digital) encoded audio
AFMT_S32_LE - 32 bit signed little endian
Device handle: PCI82fe1043-0000:00:1b.0-au06
Related mixer dev: 0
Sample rate source: 0
Preferred channel configuration: Not indicated
Supported number of channels (min - max): 2 - 2
Native sample rates (min - max): 44100 - 192000 (44100,48000,88200,96000,192000)
HW Type: Not indicated.
Minimum latency: Not indicated
HD Audio play spdifout /dev/oss/oss_hdaudio0/spdout1 (device index 6)
Legacy device /dev/dsp6
Caps: TRIGGER MMAP
Modes: OUTPUT
Out engine 1: 6/HD Audio play spdifout
Available for use
Input formats (0x00001410):
AFMT_S16_LE - 16 bit signed little endian
AFMT_AC3 - AC3 (Dolby Digital) encoded audio
AFMT_S32_LE - 32 bit signed little endian
Output formats (0x00001410):
AFMT_S16_LE - 16 bit signed little endian
AFMT_AC3 - AC3 (Dolby Digital) encoded audio
AFMT_S32_LE - 32 bit signed little endian
Device handle: PCI82fe1043-0000:00:1b.0-au07
Related mixer dev: 0
Sample rate source: 0
Preferred channel configuration: Not indicated
Supported number of channels (min - max): 2 - 2
Native sample rates (min - max): 44100 - 192000 (44100,48000,88200,96000,192000)
HW Type: Not indicated.
Minimum latency: Not indicated
HD Audio rec mix /dev/oss/oss_hdaudio0/pcmin0 (device index 7)
Legacy device /dev/dsp7
Caps: DUPLEX TRIGGER MMAP
Modes: IN/OUT
In engine 1: 7/HD Audio rec mix
Available for use
Engine 2: 9/HD Audio play front (vmix)
Available for use
Engine 3: 10/HD Audio play front (vmix)
Available for use
Engine 4: 11/HD Audio play front (vmix)
Available for use
Engine 5: 12/HD Audio play front (vmix)
Available for use
Input formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Output formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Device handle: PCI82fe1043-0000:00:1b.0-au08
Related mixer dev: 0
Sample rate source: 0
Preferred channel configuration: Not indicated
Supported number of channels (min - max): 2 - 2
Native sample rates (min - max): 44100 - 96000 (44100,48000,96000)
HW Type: Not indicated.
Minimum latency: Not indicated
HD Audio rec mix /dev/oss/oss_hdaudio0/pcmin1 (device index 8)
Legacy device /dev/dsp8
Caps: TRIGGER MMAP
Modes: INPUT
In engine 1: 8/HD Audio rec mix
Available for use
Input formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Output formats (0x00001010):
AFMT_S16_LE - 16 bit signed little endian
AFMT_S32_LE - 32 bit signed little endian
Device handle: PCI82fe1043-0000:00:1b.0-au09
Related mixer dev: 0
Sample rate source: 0
Preferred channel configuration: Not indicated
Supported number of channels (min - max): 2 - 2
Native sample rates (min - max): 44100 - 96000 (44100,48000,96000)
HW Type: Not indicated.
Minimum latency: Not indicated
/dev/dsp -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_in -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_out -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_ac3 -> /dev/oss/oss_hdaudio0/spdout0
/dev/dsp_mmap -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_multich -> /dev/oss/oss_hdaudio0/pcm0
ossmix:
Selected mixer 0/High Definition Audio ALC888
Known controls are:
jack.green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.green.mute ON|OFF (currently OFF)
jack.black.mode <front|rear|center/LFE|side|pcm4|input> (currently rear)
jack.black [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.black.mute ON|OFF (currently OFF)
jack.orange.mode <front|rear|center/LFE|side|pcm4|input> (currently center/LFE)
jack.orange [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.orange.mute ON|OFF (currently OFF)
jack.gray.mode <front|rear|center/LFE|side|pcm4|input> (currently pcm4)
jack.gray [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.gray.mute ON|OFF (currently ON)
jack.pink.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
jack.pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.pink.mute ON|OFF (currently ON)
jack.fp-pink.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
jack.fp-pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-pink.mute ON|OFF (currently ON)
jack.blue.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
jack.blue [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.blue.mute ON|OFF (currently ON)
jack.fp-green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.fp-green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-green.mute ON|OFF (currently OFF)
record.mix.mute.mic1 ON|OFF (currently ON)
record.mix.mute.fp-mic1 ON|OFF (currently ON)
record.mix.mute.linein1 ON|OFF (currently ON)
record.mix.mute.fp-headphone1 ON|OFF (currently ON)
record.mix.mute.green1 ON|OFF (currently ON)
record.mix.mute.black1 ON|OFF (currently ON)
record.mix.mute.orange1 ON|OFF (currently ON)
record.mix.mute.gray1 ON|OFF (currently ON)
record.mix.mute.input-mix1 ON|OFF (currently ON)
record.mix1 [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
record.mix.mute.mic2 ON|OFF (currently ON)
record.mix.mute.fp-mic2 ON|OFF (currently ON)
record.mix.mute.linein2 ON|OFF (currently ON)
record.mix.mute.fp-headphone2 ON|OFF (currently ON)
record.mix.mute.green2 ON|OFF (currently ON)
record.mix.mute.black2 ON|OFF (currently ON)
record.mix.mute.orange2 ON|OFF (currently ON)
record.mix.mute.gray2 ON|OFF (currently ON)
record.mix.mute.input-mix2 ON|OFF (currently ON)
record.mix2 [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.mic [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.fp-mic [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.linein [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.fp-headphone [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.green [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.black [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.orange [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.gray [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.input-mix <mic|fp-mic|linein> (currently linein)
misc.front-mute ON|OFF (currently OFF)
misc.input-mix-mute1 ON|OFF (currently ON)
misc.front1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.front2 <front|input-mix> (currently front)
misc.rear-mute ON|OFF (currently OFF)
misc.input-mix-mute2 ON|OFF (currently ON)
misc.rear1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.rear2 <rear|input-mix> (currently rear)
misc.center/lfe-mute ON|OFF (currently OFF)
misc.input-mix-mute3 ON|OFF (currently ON)
misc.center/lfe1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.center/lfe2 <center/LFE|input-mix> (currently center/LFE)
misc.side-mute ON|OFF (currently ON)
misc.input-mix-mute4 ON|OFF (currently ON)
misc.side1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.side2 <side|input-mix> (currently side)
misc.pcm4-mute ON|OFF (currently ON)
misc.input-mix-mute5 ON|OFF (currently ON)
misc.pcm41 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.pcm42 <pcm4|input-mix> (currently pcm4)
vmix0-enable ON|OFF (currently ON)
vmix0-rate <decimal value> (currently 48000) (Read-only)
vmix0-channels <Stereo|Multich> (currently Multich)
vmix0-src <Fast|Low|Medium|High|High+|Production|OFF> (currently Fast)
vmix0-outvol <monovol> (currently 25.0 dB)
vmix0-invol <monovol> (currently 25.0 dB)
vmix0.pcm9 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm10 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm11 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm12 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
I tried to turn everything off at record. Oh and this sound is only there when i play sound, not when i do nothing. Any ideas?

I'd like to use OSS instead of alsa - just for curiosity and for the rumored "better quality"
I followed wiki and got OSS working, except the same problem as stated above. First I get noise from right front speaker (pcm0) and second from spdout_std (the last one osstest testes). The second last one (spdout) gives good sound though, so I could symlink /dev/dsp to /dev/oss/oss_hdaudio0/spdout, but then how to get sound out from the optical SPDIFF output?
Has anybody solved this yet, or do I have to go back ALSA?

Sound Blaster X-Fi Xtreme problem with logitech Z-5500 speake

I have just taken deli'very of a new PC fitted with a Sound Blaster X- Fi Xtreme (driver version 6.0..28)
I have this connected to my Logitech Z-5500 5. speaker set.
I am unable to pick up all 5 speakers in any of the effects apart from ?effect: 6 Ch Direct?. Using the entertainment mode (creative software) I can test the speakers and still dont here the centre or rear unless I have the Logitech speakers set to effect 6 Ch Direct.
The other thing is that when in the effect of ?6 Ch direct? I get interference and can here noise coming through the speakers when I move my mouse over icons etc.
Any ideas! Or suggestions?

BBsin26 wrote:
How do i connect the Optical cord form the Logitech Z-5500 into the X-FI Xtreme Gamer, if there are no optical jacks to plug into what should i do? is there some sort of adapter for this? someone plz help me....Message Edited by BBsin26 on 08-7-200706:50 PM
How about RTFM.
?http://us.creative.com/support/downl...Fi+XtremeGamerMessage Edited by stormy3 on 08-8-200707:54 AM

5320 XpressMusic problems with streaming

Hi, my new nokia 5320 have some troubles with video streaming - and some others 5320 also.
Starting the 3Planet HD mobile TV (austrian Hutchinson 3G) with real player it streams the video normally, but after 50s the video freeze - audio runs further.
The phone as version 3.26 on it.
Know someone a solution for this problem (e.g. configuring real player)?
best regards
robert

Hello,
now I have testet more Nokia 5320XM with 3 Hutchinson Branding, and all 5320 freeze at video-streaming. I think this is a problem of the memory, because I changed the HSDPA-rate from 1,4MBit/s to 3,2MBit/s and its need less the half time for freezing (1,4 x 2,5 = 3,2).
I compaired the realplayer settings on a 6120c (which runs normally) and this phone has as rate about 280kBit/s.
Is the high transfer-rate (factory setting) the reason for this problem?

Problems with the front-middle speaker of my T7700, support didnt onswer my emails

sry for my english, i didn't find a german board or a telephone number I can call. I wrote 4 emails on the formular on the supportpage, but i never got an answer ;(
My problem in german:
Hallo,
Ich hab bereits von Creative mehrere Produkte gekauft und war eigentlich auch immer sehr zufrieden,
doch pl?tzlich in der letzten Woche sind 2 Dinge passiert:
1. Bei meine 7.1 Lautsprecherset T7700 ist der vordere Frontlautsprecher ausgefallen,
es liegt aber nicht am Lautsprecher, an den Verbindungen oder der Soundkarte (alles ausgetauscht, try&error)
sondern direkt am Verst?rker welcher direkt im SubwooferGeh?use integriert ist.
2. Auf meinen MP3-Player Muvo28NX wird neuerdings nicht mehr am USB Anschluss erkannt, ich hab ihn schon
an vielen rechnern getestet, und auch an meinem MP3 Autoradio mit USB geht er nicht mehr, somit l?sst sich
keine Musik mehr aufspielen ;(
Ich denke mal das es ein Software Problem ist und dabei eine neue Firmware das Problem beheben k?nnte,
evtl. k?nnte ich Diese selber aufspielen!?
Da ich diese Ger?te t?glich verwende w?re es ?rgerlich wenn ich diese ?ber meine H?ndler austauschen m?sste,
vorallem das Soundsystem habe ich bereits fest installiert, daher w?rde ich Ihen gerne Vorschlagen das ich nur die
Subwoofereinheit (einzigste defekte Komponente) zu Ihnen schicke, oder falls M?glich w?re ein Vorabtausch noch besser.
Rechnung der Ger?te nat?rlich vorhanden.
?ber eine Antwort w?rde ich mich sehr freuen.
danke im Voraus,
MfG Stefan M?ller

1) Wie auf dich 7700's Frontseite zwei die Sprecher, die sterben, w?rde ich dein soundcard mit einem Paar Kopfh?rern pr?fen, die in den vorderen F?hrung Ausgang verstopft wurden, um sicherzugehen, da? es tats?chlich die Lautsprecher ist, die defekt sind. Wenn die Kopfh?rer richtig, wenn sie an die vordere F?hrung angeschlossen werden, ausgeben (gr?ner Stecker) dann deine Lautsprecher sind B?ste arbeiten.
2) Wenn dein Spieler MP3 nicht mehr durch alles ermittelt wird, hast du es in dann deine Wahrscheinlichkeiten des Reparierens es ?ber ein Mikroprogrammaufstellungaufsteigen bist entfernt verstopft (es sei denn du es zur?ck zu kreati'vem sendest), w?hrend du es verstopftest in ein USB Tor, um die Mikroprogrammaufstellung zu aktualisieren ben?tigst. Deine beste Wette ist, mit kreati'ves in Verbindung zu treten und um Garantiewiedereinbaue zu bitten.

Does ios6 resolve iphone4s Bluetooth connectivity problems with Clarion car stereos?

Clarion cx609 and iPhone 4s don not seem to be compatible. It pairs momentarily and the disconnects, or will not auto connect after car is turned off and restarted. Is this an A2DP issue with IP4s? So frustrated, this seems like a simple thing. Supposed to be plug and play right?
Any help would be great.

I have a similar issue and Apple is completely ignoring it.
https://discussions.apple.com/thread/4366730

HT1941 i have problem with my mac air speaker?

what should i do i am in pakistan?is ther any service center then please locate it for me

What wrong with ur speakers?Did you try pram?

Problems with volume control, built-in speaker on HP ProBook

Hi
Recently installed Arch on a HP ProBook 4330s. Initially sound was working perfectly, but now I'm having problems with the built-in speaker.
Using alsamixer in the terminal, I can independently control the volume of the headphone jack and the speaker, but it seems like the speaker is linked to the headphone volume instead of the speaker volume. Thus raising the speaker volume in alsamixer has no effect on the speaker itself, which only outputs sound as long as the headphone volume is raised and the loopback box is checked. This also means that the speakers cannot be muted while using headphones.
I installed pavucontrol to see if I could gain any insight, but trying to select "Speakers" as output port seems only to have an effect the volume sliders in alsamixer. So no settings in PulseAudio UI could solve my issue.
I have googled wide and far, but haven't found anything helpful. I tried reoading kernel modules snd-hda-intel, snd-hda-codec-idt, snd-hda-codec-generic, but nothing changed.
Below is some info of my system. Please let me know if I need provide more. Any help is appreciated.
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
sysdefault:CARD=PCH
HDA Intel PCH, 92HD87B1/3 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: 92HD87B1/3 Analog [92HD87B1/3 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
pacmd list-sinks
1 sink(s) available.
* index: 20
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9959
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 19.81 ms
max request: 3 KiB
max rewind: 344 KiB
monitor source: 25
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "92HD87B1/3 Analog"
alsa.id = "92HD87B1/3 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd4a00000 irq 39"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Intel CougarPoint HDMI"
alsa.components = "HDA:111d76d1,103c167e,00100205 HDA:80862805,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-speaker>
cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xd4a00000 irq 39
Last edited by frwdrik (2014-12-08 00:49:52)

I do have all those packages installed. The volume controls were working perfectly for about 3 week, but now suddenly they are not behaving as expected. I don't know of any changes I made to my system that could have caused this. I suspected it might be a problem with the drivers, so I tried to find the appropriate driver at https://www.kernel.org/doc/Documentatio … Models.txt
[frwdrik@frwdrik ~]$ cat /proc/asound/card0/codec#0 | grep -i codec
Codec: IDT 92HD87B1/3
But I cannot find this codec on that page.
Last edited by frwdrik (2014-12-29 13:57:44)

Samsung Fascinate, problems with playing music via USB port on car stereo

Before the update, I could play the music files on my Fascinate via the USB port on my Kenwood stereo, and control basic functions such as skip, pause etc. Now, my stereo does not recognize the device, and cannot read the files. I went to local Verizon store where a sales rep tried to connect it in here new Kia Soul and it didn't recognize the device either. It will play via the AUX jack, but I lose player control and the phone does not charge via the AUX cable. She did a hard reset which did not resolve the problem. We tried one of the other employee's Fascinate in my car, which did not work either.
So, after hoping to be able to stream music via Pandora, Jango etc thru the USB port after the update, now it seems its primary function is for charging.
Also, the ALL SHARE function, which I used to get the music on my phone originally, does not work now.
Anyone else have this issue with music player and USB connection?

txgopher- I have personally never used my Fascinate to listen to music via USB via stereo however, I can see why it would be frustrating for you to no longer be able to do so when it was never an issue prior to the update.
It sounds as though you and the store rep already did some troubleshooting by trying to duplicate the problem with another car, stereo and even doing the final troubleshooting step which is a master reset.
Since you have done all of the necessary troubleshooting steps to no avail, it most definitely appears as though the software update has interfered with that USB connection in some way.
What I have done is forwarded the information you have provided to Samsung in order for them to look into this concern as well as come up with a way to get this resolved.
Please stay tuned because as soon as we hear back from Samsung we will be sure to update this forum with the results/findings.

5530 XpressMusic problem with WH-205 stereo speake...

Similar Messages

Maybe you are looking for