554 ''_postingAgent'

I have a problem sending mail from an external client to a file folder in Vibe.
The things I have tried are giving access to the folder for all users, guest and the groupwise program within the Vibe access control option.
Now the error is:
The error that the other server returned was:
554 message could not be placed ''_postingAgent' is not authorized to 'createEntries' modifications on this workspace'
Now what can I do to solve this issue? Is this rights I have to give within Vibe?

i you want to add unknown users to a specific folder, its very easy to add the user "_email_posting..." as a user in access control rights for this and think of defining a email adress for the folder

Similar Messages

Can BIOS update enable usage of 2GB DDR RAM modules on Satellite P10-554?

Hello,
I got a Satelite p10-554 and want to upgrad my RAM.
I know by default the max u can install is two 1GB Kits.
Is there any Bios-Update, that enables 2GB kits???
Thanx a lot!
Ron

Hello Ron
The same situation with my P20! Unfortunately there is no BIOS update to allows more RAM usage.

Thanks so much for the offer of help. I'm using 10.9.2 OSX. I have Numbers 2.3 (554). I tried the new version but it was "dumbed down" so much (to make it usable on multiple platforms) that it was of no use on iMac. I still can't get my contacts to open

Thanks so much for the offer of help. I'm using 10.9.2 OSX. I have Numbers 2.3 (554). I tried the new version but it was "dumbed down" so much (to make it usable on multiple platforms) that it was of no use on iMac.
I still can't get my contacts to open in Numbers like they used to do. I have a group of five addresses in a test folder in Mail called "untitled group." But no amount of pasting, dragging, etc can get them to open up in Numbers. My "real" folder has almost 100 addresses so I can't do it one by one.
Thoughts?
Thanks again.
Bob

Bob,
You can place contacts in a table In Numbers by the following methods:
Numbers 2.3:
drag from contacts
Numbers 3.2
copy from contacts, then paste into Numbers
In both cases you need to open System preferences, then select the "Security & Privacy panel and allow Numbers aaccess your contacts information.

Error 554-5.6.0 Corrupt message content... when sending emails to other users on same exchange server

Hello
I have a very strange problem at a customer from our company.
The problem happens to only one user on the Exchange 2010 organization (SP3, no additional patches installed, Server is 2008 r2).
When this specific user sends an email to one or more users on the same Exchange organization, he gets sometimes (not always) the following error back:
554-5.6.0 Corrupt message content 554 5.6.0 STOREDRV.Deliver.Exception:ConversionFailedException; Failed to process message due to a permanent exception with message Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. ConversionFailedException:
Inhaltskonvertierung: Fehlerhafter TNEF-Zusammenfassungsinhalt. [Stage: CreateReplay]
So - TNEF, corrupt message Content... I googled the error and checked all the recommended Solutions. The Outlook Client is ok, I have doublechecked it and everything is configured like it has to be.
The Problems happens as above described only for one user when he writes emails to users from one specific Domain on the same Exchange organization (example
[email protected]).
He has this specific contacts in a SharePoint contact list which is connected to his Outlook Client.
Thanks for any help or Information!
Regards

Hi,
According to your description, I understand that one user cannot send message with error “554-5.6.0 Corrupt message content 554 5.6.0”.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether it works or not when send message to external address, how about the OWA?
It seems that message has corrupt content. Is there any 3rd prevent software or Anti-Virus software in Exchange 2010?
Regarding this issue, firstly I would like to explain that content conversion occurs in two places, that are the Store Driver and the Content Conversion stage of Categorization. Since the issue exists in the delivery mail of internal user, the agent that was
used in the process of handling by Store Driver may cause this issue.
Please try to enable pipeline tracing and content conversion tracing to get more details about this error, for your reference:
Content conversion tracing:
http://technet.microsoft.com/en-us/library/bb397226.aspx
Pipeline tracing:
http://technet.microsoft.com/en-us/library/bb125018.aspx
Best Regards,
Allen Wang

Sendmail in Solaris 10 - 554 Too many connections from origin

I recently upgraded a server from Solaris 9 to Solaris 10. One of the apps that worked fine on S9 is now having a problem. I believe I have discovered the cause, but I'm not having any luck coming up with a solution.
The app in question queries a database for a list of e-mail addresses (all within our own domain) and then sends e-mail to each user. The messages are sent to our Barracuda firewall/spam filtering appliance, and it relays the messages on to our Exchange server.
The problem that arose after the upgrade is that sendmail is opening too many concurrent connections to the Barracuda, and the 'Cuda is replying with "554 Too many connections from origin".
I see that there is a sendmail configuration parameter "SingleThreadDelivery" that will only allow one connection to the Barracuda at a time. That appears to be overly restrictive, though.
My question is this: is there a way to tell sendmail to only allow some number of concurrent connections to the 'Cuda so as not to hit this limit?
Thanks,
Bill

Glen,
Thanks for the reply.
Yes, I did look at those, but my understanding was that those parameters effect inbound connection and in our case, the problem is that we want to limit the number of outbound connections.
As it turns out, the S10 upgrade was not the cause of this problem. At the same time that we upgraded we also added a second network interface (and IP address). Unknown to either myself or the current Barracuda admin, the old IP had been configured into the 'Cuda so that rate limits did not apply. The fix was to add the second IP, too (well actually, he decided to open it up to all of our servers' internal IPs).
Bill

How do i create "Save As" option to file menu in Numbers version 2.3 (554). I have done this previously but cant remember how its done. My OS is 10.9.3

How do i create "Save As" option to file menu in Numbers version 2.3 (554). I have done this previously but cant remember how its done. My OS is 10.9.3

You can follow the steps in this article on TUAW to change the five-key shortcut for Save As… to the old tthree-key shortcut.

Possibly a very basic question but I have set up a spread sheet in Numbers and have viewed help videos but I can't get it to give me sums for the columns I highlight. Keeps coming up with the figure zero. I have version 09 2.3(554). Can anyone help

Possibly a very basic question but I am going nowhere without a solution. I have set up a spreadsheet in Numbers but it won't give me sums for chosen columns. I have viewed the run through videos and used the formula but nothing happens apart from giving a figure of zero or a red arrow. The sum icon in the bottom left hand section of the window does not highlight or show any total as I understand from the video that you can drag whatever total is here onto the relevent position on your spreadsheet. I have Numbers 09 version 2.3 (554). Can anyone advise. Thanks.

Hi Sohojools,
To sum a column, use a formula such as this one in Cell A6
Type this in a cell below your data:
=SUM(A2:A4) or whatever range of cells you want to sum. The easy way is to type:
=SUM(
and then drag or shift-click to select the range of cells. Close the formula with a final bracket ")".
The sum icon in the bottom left hand section of the window does not highlight or show any total
To see the sum (and other simple statistics) in the bottom left, select a range of cells. That tells Numbers which cells you are refering to.
The videos are good, but the Numbers'09 User guide, and the Formulas and Functions User Guide are better. Download them from the Help Menu in Numbers.
Regards,
Ian.

ORA-29279: SMTP permanent error: 554 5.5.1 Error: no valid recipients

Hi ,
Following error msg coming when notification was sending to mail .
ORA-29279: SMTP permanent error: 554 5.5.1 Error: no valid recipients
Please advise how to clear this error.
Thanks&Regards
Ranganath Konikineni

It's not related to oracle. Check How you made the connection with SMTP server and to whom you are sending the mail.
Post your code with tag like {noformat} Your lines of code {noformat}

554 5.7.1: Relay access denied

hi
I have configured a mail server on a SLS xserve but I have some problems with incoming emails: using any email account to send a test mail to [email protected] (which is a valid account I can use to send messages), I receive the following error:
----- The following addresses had permanent fatal errors -----
<[email protected]>
(reason: 554 5.7.1 <[email protected]>: Relay access denied)
----- Transcript of session follows -----
... while talking to mail.mydomain.com.:
DATA
<<< 554 5.7.1 <[email protected]>: Relay access denied
554 5.0.0 Service unavailable
<<< 554 5.5.1 Error: no valid recipients
I have read some topics on this forum with similar issues but I couldn't solve mine, I'll post my postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
header_checks = pcre:/etc/postfix/customheaderchecks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 10485760
mydomain = mydomain.com
mydomain_fallback = localhost
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdclientrestrictions = permit_mynetworks permitsaslauthenticated permit
smtpdenforcetls = no
smtpdhelorequired = yes
smtpdhelorestrictions = rejectinvalid_helohostname rejectnon_fqdn_helohostname
smtpdpw_server_securityoptions = cram-md5
smtpdrecipientrestrictions = permitsaslauthenticated permit_mynetworks rejectunauthdestination checkpolicyservice unix:private/policy permit
smtpdsasl_authenable = yes
smtpdtlsCAfile = /etc/certificates/mydomain.347A9DC2B6519982A6C3D71607EB9E0A466636CB.chain.pem
smtpdtls_certfile = /etc/certificates/mydomain.347A9DC2B6519982A6C3D71607EB9E0A466636CB.cert.pem
smtpdtls_excludeciphers = SSLv2, aNULL, ADH, eNULL
smtpdtls_keyfile = /etc/certificates/mydomain.347A9DC2B6519982A6C3D71607EB9E0A466636CB.key.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = yes
unknownlocal_recipient_rejectcode = 550
virtualaliasmaps =
is there any error?
any help is greatly greatly appreciated
thanks in advance
Message was edited by: novantadue
Message was edited by: novantadue

thanks, I had already set it at "Debug" level, I have slightly different log messages when sending from gmail.com or from pippo.it but reason is the same
gmail.com
Jan 19 10:50:59 mail postfix/smtpd[1833]: connect from mail-ew0-f211.google.com[209.85.219.211]
Jan 19 10:50:59 mail postfix/smtpd[1833]: NOQUEUE: reject: RCPT from mail-ew0-f211.google.com[209.85.219.211]: 450 4.7.1 <[email protected]>: *Recipient address rejected: Service is unavailable*; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<mail-ew0-f211.google.com>
Jan 19 10:50:59 mail postfix/smtpd[1833]: disconnect from mail-ew0-f211.google.com[209.85.219.211]
pippo.it (80.253.x.x is public IP address)
Jan 19 10:55:44 mail postfix/smtpd[1941]: warning: 80.253.x.x : address not listed for hostname mail.pippo.it
Jan 19 10:55:44 mail postfix/smtpd[1941]: connect from unknown[80.253.x.x]
Jan 19 10:55:44 mail postfix/smtpd[1941]: NOQUEUE: reject: RCPT from unknown[80.253.x.x]: 550 5.1.1 <[email protected]>: *Recipient address rejected: User unknown in local recipient table*; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<mail.pippo.it>
Jan 19 10:55:44 mail postfix/smtpd[1941]: disconnect from unknown[80.253.x.x]

5.1.0 - Unknown address error 554-'5.7.1 Access denied'

Hi
Over the last 5 days I my users have been getting alot of undeliverable's on delivery notifications:
Subject: Delivery Status Notification (Failure)
From: "Mail Delivery System" <[email protected]>
Date: Sat, March 14, 2009 08:33
To: SRS0=YH6uMo=7N=mydomain.com=[email protected]
The following message to <[email protected]> was undeliverable.
The reason for the problem:
5.1.0 - Unknown address error 554-'5.7.1 Access denied'
The original email is gettting through, its just we get an undeliverable on the delivery notification. All users use BIS with various providers, Orange UK, Vodacom SA, Vodafone UK. All the undeliverable are to internal domains the problem doesn't seem to occur with external domains.
Can anyone help me please ?
Thanks
Kev

Hi
Anyone able to help me please ?
Kev

#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##

Hi,
This is my first post here.
My exchange server of late is facing a peculiar problem. I get the error message that I have posted below when sending mails to any outside domain. However when I restart the server the mails can be resend to the address without any issue. After a certain
time again the issue pops up upon which I am forced to restart the server again. I am running 2007 Exchange on Windows 2003.
Generating server: name.mydomain.com
[email protected]
#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
[email protected]
#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
Original message headers:
Received: from name.mydomain.com ([1xx.xxx.xxx.xx5]) by MHDMAILS.mouwasat.com
([1xx.xxx.xxx.xx5]) with mapi; Wed, 19 Oct 2011 08:56:29 +0300
From: <[email protected]>
To: <[email protected]>
CC: "Al Alami,Tareq" <[email protected]>
Date: Wed, 19 Oct 2011 08:56:27 +0300
Subject: RE:
Thread-Topic:
Thread-Index: AcyAQ5tu8z9CvBfdT5+1pcGQkk6x0AIuwczAAAGZjeABQyW5sAADeeJQAAETNDA=
Message-ID: <[email protected]>
References: <[email protected]com>
<[email protected]com>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator:
acceptlanguage: en-US
Content-Type: multipart/related;
            boundary="_004_EEC8FA6B3B286A4E90D709FECDF51AA06C0588CA11namedomain_";
            type="multipart/alternative"
MIME-Version: 1.0

On Sun, 23 Oct 2011 15:05:15 +0000, Jobin Jacob wrote:
>
>
>Even af
>
>ter removing my domain from the send connector I continue to receive the error. I would like to say I do have a firewall, Cyberoam. However, it was the same configuration till now in the firewall. I did try Mx lookup and found the following.
>
>Could there be any other solution to this issue ?
Sure, but it's necessary to ask a lot of questions since none of us
know how your organization is set up.
I see you also have "Use the External DNS Lookup settings on the
transport server" box checked. How have you configured the "External
DNS Lookups" on the HT server's property page? Is there any good
reason why you aren't just using your internal DNS servers? If the
internal DNS servers are configured to resolve (or forward) queries
for "external" domains then there's no reason to use that checkbox. In
most cases checking that box is a mistake.
http://technet.microsoft.com/en-us/library/aa997166(EXCHG.80).aspx
The behavior you describe (it works for a while and then fails;
restarting the server returns it to a working state) sure sounds like
some sort of DNS problem.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

Wierd behavior, error #554-5.3.4 Content conversion limit(s) exceeded

Hello
My customer have a local Exchange 2010 SP3 installation.
They use a 3-party line of business application that tries to send an email with an attachment to another internal user.
The applications uses API to open a new mail in Outlook 2010 where the email is ready to send with the recipient, body and attachment.
If the user presses send. They get a NDR right away. But if they remove the recipient address and type it manually again it works.
The NDR says
Diagnoseinformasjon for systemansvarlige:
Genererende server: FS1.mydomain.local
[email protected]
#554-5.3.4 Content conversion limit(s) exceeded 554 5.3.4 STOREDRV.Submit.Exception:ConversionFailedException; Failed to process message due to a permanent exception with message The content conversion limit has been exceeded. ConversionFailedException: The content conversion limit has been exceeded. ##
Opprinnelige meldingshoder:
Received: from FS1.mydomain.local ([fe80::39d4:621:4758:d99]) by
FS1.domain.local ([fe80::39d4:621:4758:d99%13]) with mapi id 14.03.0123.003;
Fri, 20 Sep 2013 11:29:04 +0200
MIME-Version: 1.0
Content-Type: text/plain
Date: Fri, 20 Sep 2013 11:29:04 +0200
Message-ID: <[email protected]>
Subject: =?iso-8859-1?Q?P=E5minnelse?=
Ive read up on Content conversion limit(s) and tried setting different limits on my transportconfig, transportserver, receiveconnector, sendconnector etc. Without any luck.
I see that alot of other users that get a similar NDR. Have descriptions that specify more detailed error reasons. Like for example to many attachments or to large header. But mine don't.
So i activated Pipeline tracing and content conversation tracing.
This is my output
Microsoft.Exchange.Data.Storage.ConversionFailedException: The content conversion limit has been exceeded.
at Microsoft.Exchange.Data.Storage.ConversionAddressCollection.CreateResolutionList()
at Microsoft.Exchange.Data.Storage.ConversionAddressCache.Resolve()
at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.get_AddressCache()
at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteFromHeader()
at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeHeaders(MimeFlags flags)
at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.ConvertItemToSummaryTnef(MimeStreamWriter writer, ConversionLimitsTracker limits, Boolean base64Encode)
at Microsoft.Exchange.Data.Storage.ItemConversion.<>c__DisplayClassc.<InternalConvertItemToSummaryTnef>b__b()
at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, LocalizedString exceptionString, CtsCall ctsCall)
at Microsoft.Exchange.Data.Storage.ItemConversion.InternalConvertItemToSummaryTnef(Item itemIn, Stream mimeOut, OutboundConversionOptions options)
at Microsoft.Exchange.Data.Storage.ItemConversion.ConvertItemToSummaryTnef(Item itemIn, Stream mimeOut, OutboundConversionOptions options)
OutboundConversionOptions:
- detectionOptions: CharsetDetectionOptions:
- preferredInternetCodePageForShiftJis: 50222
- requiredCoverage: 100
- preferredCharset: null
- encodeAttachmentsAsBinhex: False
- suppressDisplayName: False
- internetMessageFormat: Mime
- internetTextFormat: HtmlAndTextAlternative
- imceaEncapsulationDomain: mydomain.no
- preserveReportBody: True
- byteEncoderTypeFor7BitCharsets: UseQP
- clearCategories: True
- owaServer:
- logDirectoryPath: C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\PipelineTracing
- isSenderTrusted: True
- dsnWriter: Microsoft.Exchange.Extensibility.Internal.DsnHumanReadableWriter
- userADSession: Microsoft.Exchange.Data.Directory.Recipient.ADRecipientSession
- useRFC2231Encoding: False
- recipientCache: Microsoft.Exchange.Data.Directory.Recipient.ADRecipientCache
- demoteBcc: False
- useSimpleDisplayName: False
- partialStnefConversion: False
- resolveRecipientsInAttachedMessages: True
- quoteDisplayNameBeforeRfc2047Encoding: False
- filterOutPredecessorChangeList: False
ConversionLimits:
- maxMimeTextHeaderLength: 2000
- maxMimeSubjectLength: 255
- maxSize: 2147483647
- maxMimeRecipients: 12288
- maxBodyPartsTotal: 250
- maxEmbeddedMessageDepth: 100
- exemptPFReplicationMessages: True
It is worth mentioning that the email only has 3 lines of text and the attachment is a 72 KB .tif file. Their is only one recipient. It doesn't matter what the recipient is. As long as he is the recipient from the line of business application.
The total .msg message size is 89 KB in total.
Im completely stuck and appreciate every input.

Really sorry to say Rob that we didnt find a solution. Our client just accepted it. Both Microsoft and the application provider pointed the finger at each other. And we hope to move this customer to Office 365 instead in time.
Kinds regards
Karl Jørgen Weme
MCP
Please remember to click “Mark as Answer” on the post that helps you, and to click
“Unmark as Answer” if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Exchange 2010 - #554 5.2.0 The Active Directory user wasn't found

We have migrated form Exchange 2003 to Exchange 2010 a year ago with no issues. All Exchange legacy servers uninstalled with no issues. We had an issue today were emails sent to mail-enabled public folder was returning NDRs. This happened on two or three
and then trickled down thorugh several public folders. This client has several public folders and uses them for business processes. There have been 100s of incidents now.
Symtoms:
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
#554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn't found. ObjectNotFoundException: The Active Directory user wasn't found. ##
We are getting the following Event log messages on Hub transport servers.
Log Name:      Application
Source:        MSExchange Store Driver
Date:          5/29/2014 2:45:53 PM
Event ID:      1020
Task Category: MSExchangeStoreDriver
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxxxx
Description:
The store driver couldn't deliver the public folder replication message "Backfill Request (xxxxxxx)" because the following error occurred: The Active Directory user wasn't found..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchange Store Driver" />
    <EventID Qualifiers="49156">1020</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-05-29T18:45:53.000000000Z" />
    <EventRecordID>168407</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxxxxx</Computer>
    <Security />
</System>
<EventData>
    <Data>"Backfill Request (xxxxxxx)"</Data>
    <Data>The Active Directory user wasn't found.</Data>
</EventData>
</Event>
Actions:
We have executed the following steps.
1. Start the ADSI Edit MMC Snap-in. Click Start, then Run, and type adsiedit.msc, and then click OK.
2.       Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand CN=Configuration,DC=DNSDomainName,DC=com.
3.       Expand CN=Services, and then CN=Microsoft Exchange, and then expand CN=YourOrganizationName.
4.       You will see an empty Administrative Group. Expand the CN=YourAdministrativeGroupName.
5.       Expand CN=Servers.
6.       Verify there are no server objects listed under the CN=Servers container.
7.       Right click on the empty CN=Servers container and choose Delete.
8.       Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
To no avail the issue still exists.
We have not rebooted the servers and plan to in the early morning.
We have dismounted/mounted public folder DBs
Does anyone have any other suggestions?
Danny Kennedy, MCSE, MCITP

I have already uninstalled legacy servers a year ago.
This was the solution:
I moved the public folder hierarchy to exchange 2010 using ADSIEdit.
                                  If you don't know adsiedit tool that much check this
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03067450-1%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=1840527&ac.admitted=1401455429281.876444892.492883150
Danny Kennedy, MCSE, MCITP

SendFailedException: 554 - Access denied ?!

Hi people,
The following is a piece of code, my first try on JavaMail API....
public class SendMail {
public static void main(String[] args) {
try {
String host = "smtp.vsnl.com";
String from = "[email protected]";
String to = "[email protected]";
// Get system properties
Properties props = System.getProperties();
// Setup mail server
props.put("mail.smtp.host", host);
// Get session
Session session = Session.getDefaultInstance(props, null);
// Define message
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject("Hello JavaMail");
message.setText("Welcome to JavaMail");
// Send message
System.out.println("Sending the message.......");
Transport.send(message);
System.out.println("Message sent..............");
}catch(Exception ex){
ex.printStackTrace();
The output -
Sending the message.......
Sending failed;
nested exception is:
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 554 <[email protected]>: Sender address rejected: Access denied
The mail ids here are valid and infact I also tried some other non-yahoo / hotmail ids, but it still does not work !!!!!!!
Any fixes to be done to the code ??
Regards.

The SMTP server is setup to not relay messages for [email protected] This is generally done so someone cannot use the server to send spam out to the net. The server is probably setup to only relay messages for addresses and machines on its own domain. Try changing the from address to an address on the servers domain. It may not need to be a valid address although some machines are setup to check that too.
You can also try contacting the administrator of the server to see if there is anything he can/will do.

Error 554

I'm using an email address owned by me but using BT SMPTP for outgoing mail. A couple of times recently I've received bouncebacks and the following error report:
I know this due to BT's SMPTP setting via Yahoo but I can't resolve it. Ant help out there?
Remote host said: 554 This server requires you to send from an IP address specified by the SPF

Hi Scargman
Welcome to the forum.
This sounds like quite a problem. I am left wondering what exactly can say to this if its down to Yahoo permissions or your domain providers email settings.
That being said I might be able to get this looked into for you. Can you send me an email to [email protected] with as much information as possible regarding this problem.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

554 ''_postingAgent'

Similar Messages

Maybe you are looking for