5545 'Active' light is on for 1 HA unit only..is that normal?

We have 2 Cisco 5545s in an HA/failover configuration. One has an ‘Active’ light on, the other does not...is this normal? Does it mean the one with the light on is currently 'Active' member of HA pair?

Hey Andre, tx for the fast response. :)
Yes, this is an Active/Standby install...you have confirmed my suspicion's..tx!
I'm remote from these devices(which resides in data center). The client wrote back stating that it was the orange/red 'Alarm' light that was on only on the current Standby unit that they were concerned with. But everything looks fine from what I can tell.
What does the Alarm light on typically signal? Thinking maybe HDD errors? , physically memory fault?
Thoughts?
Cheers

Similar Messages

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

I'm working in Pages 4.1. I want to add text to a header but for it to appear only on that page in stead of duplicating itself on all pages of the document. How can this be done?

I'm working in Pages 4.1. I want to add text to a header but for it to appear only on that page in stead of duplicating itself on all pages of the document. Can this be done?

See this thread: https://discussions.apple.com/thread/3728197?start=0&tstart=0

HT2265 for some reason the only photos that do the random scrolling are events, can I include the albums from iphoto to scroll as well. the know the albums have synced because i can view them in slideshow

for some reason the only photos that do the random scrolling are photos in the events section of iphoto. is it possible to include the albums from iphoto to scroll as well. the know the albums have synced because i can view them in slideshow pls help

Welcome to the Apple Community.
I assume you are referring to the screensaver. You can change the photos used by the screensaver in the screensaver settings. Note if you have a large number of photos in the collection you choose for screensaver, not all of them will be used due to the limited storage available to the Apple TV.

I have all my alert on for email but I only see that I receive any when I open the email box. How do I fix that?

I have all my alert on for email but I only see that I receive any when I open the email box. How do I fix that?

Did you change the ID in Settings>iTunes & App Stores>Apple ID? Tap the old ID and sign out and then sign in with the new one. If not running iOS 6 it will be Settings>Stores>Apple ID.

I cannot get ipod to start, Logo for power is the only one that appears but it will not recharge either by using pC or dock. I have used two different connecting wires but no difference in response

I cannot get Ipod to start. The only logo that comes up is the power needed but in spite of connecting the ipod to PC and using two different connection leads the ipod does not respond. I also tried to power it using a i station 7 but no difference. I tried all the usual pressing of both menu and play buttons. Is it fixable?

Thanks for your tip. I tried leaving the ipod in the I -Station 7 overnight and then reconnected it to my PC> It asked if i wanted to reset to factory settings. I did this and then the Apple logo came back on .After that a very sad looking logo of an ipod came on with www.apple.com/support/ipod underneath. I feel that either burial or cremation is my option now for this old ipod.

I own an iPod shuffle (4th generation). For some reason, the only music that will sync to my iPod are the songs I purchased off of iTunes. (Most of my music is copied off my CD's)

My iPod shuffle only syncs music that was purchased from the iTunes store. Most of my music has been copied off of CD's and none of that music will sync to my iPod. Please help!

Sorry for the typos, I hope my message still gets across!

I did nott receive any disc, manuals or otherwise support for this brand new cp. is that normal?

I have a Pavilion p2-1122 - - - It had win 7 but now has win 8 - - - no error msg - - - did no receive disc or manual - - - - Is this normal HP practice?

Hi:
Yes that is normal.
Various manuals can be found on the PC's support and driver page.
http://h10025.www1.hp.com/ewfrf/wc/product?product=5285229&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
As far as disks...you are given the opportunity to make a set of recovery disks using the recovery manager found in the W7 all programs menu.
If you did not do that, and have now upgraded to windows 8, I believe you have lost that capability.
If you need recovery disks, you will now have to order them from HP.
See this link for more info.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_task=solveCategory&cc=us&dlc=en&lan...
Paul

I have windows and I have synced my ipad for the first time. I am at step 6 of 6 where it downloading Safari safe browsing data. It has been at this step for over an hour. Is that normal or should I stop it and start over?

I have windows and I have synced my ipad for the first time. I'm at step 6 of 6 Downloading Safari safe browsing data. I have been here at this step going on 2 hours. Is this normal or is something wrong.

Lyrics aren't supported in the Music app on iOS 5 on the iPad. These are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html

Intel Xserve No Activity Lights

Hey I'm trying to find out what could be wrong with our new Intel Xserve. It's fresh out of the box and set up on it's rack. We try to turn it on and it looks as if everything is well but the blue activity lights don't come on. We tried changing the startup method, and that doesn't work either. Anyone have any ideas?
BTW, this is my first post. Glad to be here!
Intel Xserve

Hey there,
Welcome to the board..
Had exactly the same problem 3 weeks ago. I pulled the thing completely apart and rebuilt and reset all the hard reset buttons inside. Still no joy. Had a spare's kit so replaced the logic board and away it went perfectly. Spoke to Apple techincal and they replaced the logic board from my spare's kit. They offered to swap the entire machine but time was not on my side so this was the quicked way to solve the issue. I did spend 1 hour on the phone to them to check and they agreed with my prognosis. Interested to know if you get any further with yours than I did - fingers crossed for you. Guessing there was a dud batch or similar.
Oli

Intel xserve activity lights

First gen intel xserve from a long time ago, and was running 10.4.x
I remember it used to have 4 blue leds on the system activity lights on the front of the machine compared to the g5's 2 blue... (and remembered reading that had to do with the 4 cores).
As of recently, and haven't paid attention, I had to upgrade to 10.5, and then to 10.5.7 and the other day when I was downstairs, noticed that the 4 system leds were gone and it now just looks like the g5's when it's not doing anything. However, when I run compressor and have all 4 going full blast and look carefully at the front, it does still look 4 sets, but i havent been able to see just the four individual lights.
I've just been accustomed to looking at the front and seeing 4 individual blue lights, so was wondering if it sounds normal...

Hey there,
Welcome to the board..
Had exactly the same problem 3 weeks ago. I pulled the thing completely apart and rebuilt and reset all the hard reset buttons inside. Still no joy. Had a spare's kit so replaced the logic board and away it went perfectly. Spoke to Apple techincal and they replaced the logic board from my spare's kit. They offered to swap the entire machine but time was not on my side so this was the quicked way to solve the issue. I did spend 1 hour on the phone to them to check and they agreed with my prognosis. Interested to know if you get any further with yours than I did - fingers crossed for you. Guessing there was a dud batch or similar.
Oli

No xServe system activity lights in 10.8 Server

Hi there,
i have installed Mountain Lion Server on my xserve and everything is fine but the "System activity lights"
do not come to live at boottime as the did in Lion server.
I know they need a kext because by the time i was installing 10.7 server they only startet after installing the server app.
So this time i assumed ot would be the same but it did not.
Does anybody know which kext i have to install there to bring the lightsback?
Thanks,
Ben

I phoned apple support on this one, after a lot of explaining (to a rep with poor english), eventually i was told "not work in yosemite", end of case.
We are on our own for this one.

HDD Red activity light is on constantly---

Why when I run arch is the HDD red disk activity light always on.
Is it an arch thing or is the drive failing or what.
Does not look good.
Regards
El Zorro
Last edited by elzorro (2012-01-17 07:01:05)

elzorro wrote:...both strigi and nepomuk were indexing so I disabled them both, hopefully this is OK,... Guess that furious indexing that seemed not to stop could overwork the drive and make it fail early.
Personally, I don't often have the need to find a file by it's contents, so I turn off Stirgi. I leave Nepomuk on. If you do nothing and leave them both on, the system should finsh indexing -- eventually My home directory has a lot of source files, including the source for the kernel. Indexing all that takes about a day. If you turn on Strigi, you can use the advanced settings to limit its search to specific directories. You can also filter by file type. I am always hit by the known bug in which indexing gets hung up in certain pdf files and runs one of my CPUs up to 100% until I kill it.
Disk drives are pretty reliable, I don't worry (much) about excess disk activity being a serious risk to the drive. I do dislike serious disk activity because it impacts the responsiveness of my system and because it has a serious impact on power consumption (usually because there is some code actively running that needs to be fed data by that disk activity).

X1 Carbon hard disk activity light

To save weight or whatever the Lenovo engineers decided to ommit a harddisk (SSD) activity light. As background applications might do a lot of mass storage work it would be helpful to find out if a slow laptop is due to exactly that.
There is a solution! Activity Indicator will show a non intrusive indicator on the system bar. You can download it here:
http://sourceforge.net/projects/activityindicat/

ColonelONeill wrote:
Plenty of solutions.
I agree. But Activity Indicator is a very light weight app that does just one thing and does it well.
I've been using it for several years now on a couple of ThinkPads that I manage remotely when I'm travelling. Even though those ThinkPads do have HDD activity LEDs it's a bit hard to see them across the Atlantic
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

T61p Wireless Activity Light

I have a T61p and was having the worst time with my wireless networking. I updated the wireless driver and the AC to the newest versions it the wireless seems to be stable again. Woo Hoo..
However, the wireless activity light just below the display next to the bluetooth light, num lock, etc doesn't work anymore. It won't turn on and off when I turn the wireless radio on and off and I can't see netework activity via that light anymore. It's a minor annoyance but I sure would like it to work again. Anyone know what I can do?
Thanks in advance
Shawn
Message Edited by shawnod on 10-25-2008 06:51 PM

I am using the Windows Airport Utility v5.6.1 (current version). There is an option to set the activity LED to flash or not.
As I said, the new Extreme will ignore requests from an AirPort Utility v5 version for a setting that is not present in the v6 AirPort Utility.
You may not be aware, but you should not be using a v5 version of AirPort Utility to try to administer the AirPort Extreme.
Please review the System Requirements for the AirPort Extreme from the specification page of the AirPort Extreme:
Tech Specs
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
As you can easily see, a version 5.x of AirPort Utility does not meet the requirements for the new AirPort Extreme, so settings that are not present on the v6 of AirPort Utility will not be implemented on the new Extreme.

5545 'Active' light is on for 1 HA unit only..is that normal?

Similar Messages

Maybe you are looking for