55G310U won't turn on surround sound receiver; 46G300U worked fine

I had a 46G300U connected to a Yamaha RX-V467 surround sound receiver via HDMI. It worked great: when I turned the TV on or off the receiver turned off as well, and the TV remote correctly controlled the receiver's volume.
I replaced the TV with a new 55G310U TV. And while the RX-V467 is correctly recognized as a REGZA LINK device, the TV does not turn it on when it powers up. Worse than that, the sound keeps reverting to the TV speakers, so each time I turn on the TV I must go to REGZA LINK setup and re-select the audio receiver for sound output.
Has anyone seen this?

I have that same problem, did you ever get an answer?

Similar Messages

  • My macbook air screen is black, the screen won't respond but the sound and brightness works fine - any solutions?

    I treid letting it run flat, then charging it but it went back to the black screen. Sometimes the mouse icon can be seen and I can move it but it will vanish sometimes.

    Could be a problem with the LCD or it's cable, this seems like a hardware fault. I would go to the Apple store before its to late and before you run out of warranty (you get a 1 year warranty) There no way of fixing this without opening the computer which would void the warranty. If you have ran out of warranty i would go on eBay and look for a inverter, the cable or possibly the LCD apple would be able to tell you what it is without you having warranty and try the repair yourself or you could pay Apples overpriced repair.

  • How do I turn on surround sound (5.1) for all my iTunes items?

    In iTunes, while a video is playing, I can go to Controls/Audio and Subtitles and select English (Surround Audio). This allows the sound to work with my 5.1 Dolby Digital audio setup.
    It looks, though, like the only way to turn this on is to actually be playing the video. I have gone into iTunes and selected a whole set of videos, then selected the surround sound - but that didn't work. As soon as I played a video I hadn't played before, it was back to stereo, and I had to manually make the selection again. (Now, once I make the selection it sticks; I don't have to do it again. But, I still have to do it for each individual video.)
    How can I "turn on" surround sound for all items that have it?

    1. Double-click the Home button and swipe Task Bar to the right
    2. Check the volume and mute settings
    http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

  • Surround sound receiver is causing Apple TV to cut in and out.

    My Apple TV is cutting in and out and I think my Marantz surround sound receiver is causing it because when I hook Apple TV directly to the TV it works fine.  I looked at my receivers owner's manual but did not find anything helpful.  Any idea how to resolve it?

    Welcome to the Apple Community.
    Check that the wifi channel is set to the same channel as on your previous router, also check the multicast rate is identical.
    If the problem persists, you might also want to see if netgear have a forum or a help number and ask there.

  • Xfinity X1 - TV Sound Cuts In And Out When Connected to Surround Sound Receiver

    I'm a fairly new Comcast Xfinint X1 TV and Internet subscriber.  I am experiencing issues with TV sound cutting in and out.  The sound cuts out for 2-3 seconds, all the time.  The Onkyo surround sound receiver has been used without issue on a different cable TV platform so I know there is nothing wrong with the receiver. System set-up. Voice/data modem - Arris Interactive, LLC - tg862gCable Box - Make/Model - PA px001ancSurround Sound Receiver - Onkyo TX-NR609 HDMI cable run from cable box to Onkyo receiver.  HDMI cable run from Onkyo receiver to TV.  I have reset all equipment multiple times with no resolution. Any help would be greatly appreciated as it is very difficult when trying to watch TV. 

    I highly doubt your modem has anything to do with this because it doesn't have MoCA.However it sounds like you an original green power light Pace DVRs and they are well known to have audio dropout issues. I would replace that DVR with a different version.
    Is this problem happening on a specific channel? CBS seems to be having issues lately. I am watching the CMA awards right now and I have heard the volume change a couple times but this is the only channel it is happening on which would suggest it is not Comcast's fault.
    spv510erp wrote:
    I'm a fairly new Comcast Xfinint X1 TV and Internet subscriber.  I am experiencing issues with TV sound cutting in and out.  The sound cuts out for 2-3 seconds, all the time.  The Onkyo surround sound receiver has been used without issue on a different cable TV platform so I know there is nothing wrong with the receiver. System set-up. Voice/data modem - Arris Interactive, LLC - tg862gCable Box - Make/Model - PA px001ancSurround Sound Receiver - Onkyo TX-NR609 HDMI cable run from cable box to Onkyo receiver.  HDMI cable run from Onkyo receiver to TV.  I have reset all equipment multiple times with no resolution. Any help would be greatly appreciated as it is very difficult when trying to watch TV. 

  • How to turn off surround sound?

    I am using Adobe Audition 3.0 for recording and mixing/mastering my music. I also use effects like reverb.
    The problem is, when I mix it down, it turns into an audio file that has surround sound.
    I don't want this, because you can hear strange sounds like echoes coming from the two back speakers, which causes the song to sound much more worse than when it comes just from two speakers.
    So my question is: how can I turn off surround sound?
    Thanks

    Since MP3 files don't inherently support Surround, I suspect that the reason for your strange rear noises has nothing to do with the format you are saving in at all, and everything to do with the way your speakers are set up to run on the PC. If you go to the Control Panel's 'Sounds' tab, you may find that there's a very simple solution to this!

  • I turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. How do i fix it?

    i turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. how do i fix it?

    Check your cable whether it is good. If it is use the wall plug to charge at least half an hour. See how it goes.

  • The sound has been working fine until now. I turn the volume up but no sound. What could be causing this and how do I fix it? Thanks so much.

    The sound has been working fine until yesterday. I turn the volume up but no sound. Not while playing games or with key taps. What is causing this and how can I fix it? Thanks so much.

    I did a search for "no sound" and found the solution. Thanks for the info.!

  • The screen on my Iphone 4S won't turn on. Siri doesn't work.

    The screen on my Iphone 4S is black. the phone is on, I still get messages, but the screen won't turn on. Siri doesn't work either. Anyone know what to do?

    See this Discussion
    https://discussions.apple.com/message/19521062

  • HT202157 I just downloaded 5.2 and both my Apple TV shows and movies won't come up. Hulu and Netflix works fine, but when I go to select a purchased move or show through the apple menu, spiral comes up for about 10 seconds and then brings me back to the m

    I just downloaded 5.2 and both my Apple TV shows and movies won't come up. Hulu and Netflix works fine, but when I go to select a purchased move or show through the apple menu, spiral comes up for about 10 seconds and then brings me back to the main page

    StagLemoore wrote:
    Thank you everyone for your suggestions and help.  Ended up logging out of my apple ID account.  Of note, when I did I did a quick test and checked out both the movies and tv show options, and it all worked perfectly.  I then logged back in, and now all my purchased and rentals are available which makes sense.  I guess with the update there was some weird bit of trons that required one to log out then back in.  Probably doing a rest in between may not hurt for some.  Thanks again for all the assistance. Cheers.
    It looks like there is a Apple doc for this problem here -> Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating

  • I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen.  Same thing in itunes, itunes u, app store, and a few other apps won't connect.  Safari seems to be working fine.

    I installed iOs7 on iPad 2 and now when i'm in iBooks and tap "store" i get a blank screen.  Same thing in itunes, itunes u, app store, and a few other apps won't connect.  Safari seems to be working fine.

    I had this same problem.  Tried everything the internet said including a full restore.  Which was terrible.  Nothing worked until.....go to general...reset....reset all settings.
    You had to go back in and reset anything you customized afterwards, however it does not allow the store to load.  Thanks! 

  • LG Blu-Ray Surround Sound Receiver

    Hi there, almost 2 years ago I bought an LG Blu-Ray player with the 5 speaker surround sound.  At the time, I lived in an apartment and could position the speakers properly.  However, recently I purchased a house (Yah!), but there isn't a way to run cables from where the TV sits to the rear corners for the rear speakers. I was wondering if there is an adapter to make at least the 2 speakers wireless that wouldn't cost an arm and a leg?
    If not, any other suggestions?
    Thanks everyone!

    Hello Geekgyrl!
    Thanks for posting and congratulations on unlocking the Home Owner achievement! I've ran into the situation that you are describing numerous times when working as a Home Theater Installer for Geek Squad.
    The first thing I'd need to know is what type of surround system you have. Are you set up with a dedicated receiver and multiple speakers? Or is the blu-ray player the center of the speaker setup?
    We do carry a Rocketfish Wireless Kit that should work for you if you have a standalone receiver, and I can personally recommend it after installing quite a few of them myself. It is pretty affordable and a lot easier than going into the attic or crawl space with the random mystery insects.
    If the blu-ray player is the center, or you have a home theater in a box, you might want to consider calling our Mission Control dispatch (1-800-GEEKSQUAD) center or visiting your local Best Buy to schedule a Home Entertainment Advisor to visit your home and recommend additional solutions.
    I hope this gets you started on your path to an awesome movie night, and let me know if there is anything else I can answer for you!
    Rocketfish™ - Universal Wireless Rear Speaker Kit - Black
    Model: RF-WHTIB | SKU: 8275528
    Enjoy vibrant CD-quality audio with this Rocketfish™ RF-WHTIB wireless rear speaker kit, which features a wireless range up to 100' for clear transmission. Multiple placement options allow flexible use.
     4.1 Read reviews (243)
    Sale: $99.99
    Agent Kevin|Retired Community Connector | Best Buy® Corporate
    While I'm a current employee of Best Buy, my views, opinions, and advice do not reflect those of Best Buy or its affiliates.

  • How to turn the surround-sound-like effect off with headphones?

    When I plug in the headphones into my ipad I notice the sound in the headphones becomes kinda surround-like. For instance I clearly hear keyboard clicks "at a distance" in front of me when using headphones. This "effect" is nice for keyboard clicks but totally ruins any music listening experience because any song gets distorted and is perceived at some distance when played. This becomes extremely annoying when listening to mono content. The special sound processing applied to get this surrround-like sound effect adds artefacts into the sound, please let me know how to turn this off Apple, I couldn't find any option in the settings.
    Overall, I couldn't even imagine I'd get such an annoying and unprofessional effect applied by default without a possibility to turn it off. If I knew that in advance I'd never buy my ipad since currently it's not possible to listen to music with it
    Message was edited by: vvtrus

    vvtrus, did you ever consider that turning off the clicks or other sounds might have an effect? So, before telling people who want to help you that an answer makes no sense to you, you might first try it.
    Since hearing and listening to music is a very subjective matter which also depends on the quality of the headphones you use, it might be the case that you hear on your iPod something that you couldn't hear on your laptop and portable music player (both of non-apple design). Then you should blame those other devices to deliver you such poor sound. On the other hand, you might have a better hearing than other people which might give you the impression of surround-sound-like effects -- in which case we can't help you either.
    Anyway, there are no settings to turn on or off "surround sound effects".

  • 5.1 mp3 to external surround sound receiver with do

    I have a not so new aiwa receiver with dolby surround 5.. A few years ago I had it hooked up to my soundblaster 5. mp3 and it worked well.
    On the back under 5. input it has RCA connections for center, subwoofer,front and surround. I am using Bose accoustimass 7 speakers. Which consist of a left right and center speaker with a passi've sub woofer. I have 3 wires with RCA (2 red and white)plugs on one end of each wire and PC audio plugs in the other. When I plug the PC plug into the digital on the card and RCA into center and subwoofer and go to test. I hear a voice say center speaker. (the sound is coming out of the left front speaker) and I hear a voice saying front right (coming out of the center speaker.) and no voice saying front left. I have tried every configuration possible ( I think) and no left front. Even if I change the speaker configuration to video one with 2 speakers or video 2 with 4 speakers and on and on and on.(of course I change the RCA plugs to what channel I am trying) No left front. I have gone to CD and aux for the tv or video or DVD and the left speaker works fine. Just not when hooked up to my sound card. What's the deal? Can the left on the card be blown? MY receiver does not have a digital plug on the back

    yup. Yours is just a 4 channel sound card, for Front Left, Front Right, Rear Left and Rear Right speakers. It is seperated with two jacks.
    A 6 channel (5.) sound card has a third jack for the center speaker and subwoofer. So if you continue to use your Value card, you will only hear sounds from the Front and Rear, nothing from center and subwoofer.
    Its time for an upgrade I say, and since you are getting such a powerful set of speakers, seriously consider an Audigy 2 ZS. A THX-Certified Speakers should go with THX-Certified Sound Card

  • Some of my scenes selection menus won't turn or play sound.

    My main menu and the first scene selection menu has motion and sound, but the rest of the scene selection menus do not turn or play sounds (music).  How can I get them to work?

    First create a disk image of the project and see if those menus work as expected when played with DVD Player on your Mac.  If they do then the problem lies in the burning process.
    Follow the workflow described below to help assure the best quality disk possible:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

Maybe you are looking for