5610 T-Mobile doesn't allow applications access to...

The exact error I get is, "application access set to not allowed". I downloaded a third party application that attempts to access the internet for information, but my T-Mobile branded phone does not allow it.
What do I need to change in order to fix this problem?

I did try your suggestion and yes the 5610 will start without a sim inserted. Without the sim my browser is still labeled T-Zones, and certain T-Mobile files still existed and couldn't be deleted. I also got the same error when starting a couple of the same applications. No I didn't expect them to work, but I expected an error along the lines of no connection not the same application access not allowed. Honestly I had no doubt that they made changes which is why i have been giving them such a hard time, I was pretty sure I am being lied to. What this definetly tells me is that I could not just take this phone to another network and have it work correctly because that was an option. What it doesn't tell me is if I get a vanilla phone would I still have problems because of what is or perhaps isn't on the sim card? As far as I am concerned though my phone is defective since it does not work as it should, there is a big difference between cosmetic changes for branding and functional changes that alter the way the equipment works. If third party network applications do work on this phone then I would expect them to work on mine, Ya ok I could see T-Mobile disabling them through the sim so that those features can not be used on thier network (stupid but ok they have that right) but not breaking the phone to disable them after all this is now my phone and should I chose to move to a network that permits them (again an option I am considering) they should work since they are supported by the phone. 

Similar Messages

  • How to allow application access to particular User while running payroll

    Guys,
    We are using Oracle Co-Hrms and payroll application and running fine,but one majore problem we face in every payroll,while running the payroll if any employee profile opened by any user ,which is inculde in assignment set of running payroll then system take much time,Howevery,rightnow we inform to whole department to don't use hrms between x to y time,but it is not effectivey properly and also not propery way according to this big Application "Oracle E-Business Suit,i think,there must be an opetion to cover this problem,
    Is there any possibilit to locke all of the user temporary excep one to two user,who work on Salary Process(payroll).
    Please advice
    thanks

    Thanks for reploy,
    The way you have defined is better to avoide this issue,could you please tell me one thing,is there any request in application to disconnect all the user forcely on the spot who are connected and allow again to login in application only thoes user who have System Administator Responsibility,
    --thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Firefox mobile doesn't allow to type national symbols with external usb keyboard.

    I'm using Asus PadFone with it's native keyboard dock-station. When I try enter text on any text field in web page my keyboard layout is set to english. This doesn't hapen when i write text in Firefox search/url field. Tested with Russian and Lithuanian keyboard layout - it makes no difference. I can write national symbols with on-screen keyboard.
    There is no such problems with other browsers, so it's something with Firefox.

    Sounds like https://bugzilla.mozilla.org/show_bug.cgi?id=669361 tomorrow's Firefox nightly build may have a fix for it. You can try the build at http://nightly.mozilla.org

  • Time Capsule doesn't allow to access NTFS external USB Disks

    good morning. I've just configured a 2TB Timecapsule, in a wireless network with 2 MACBookPro and 1 windows xp.
    A HP HJPro 8500 is connected to TC and is reachable via wireless, thru a Belkin USB port replicator.
    two time machine's usb disks are connected thru the same belkin adapter and work fine.
    Another two external usb disks, formatted as NTFS, are not visible at all (even if they are, if connected directly to the macs of to the xp.
    I've tried to disconnect the TM disks, leaving connected only the two ntfs disks, with no results.
    Any idea to solve this issue? i don't expect to have NTFS disks not accessible thru TC.. no manuals mentioned this as a problem..
    thank you in advance.
    F

    NTFS is not supported:
    http://support.apple.com/kb/ht2426

  • "the firefox application is not allowed to access the graphics hardware"

    I would like to ask for help the following phenomenon:
    "the firefox application is not allowed to access the graphics hardware"
    This error message appears, at times, and then restart the browser once in a while it's all good.Do not use any accessory.Operating system: Win 8.1 64 bit Oh, even so much that the virus and malware search engine does not find anything.
    Any idea?Thank you very much.

    Strange, I mostly found this error happening for game software: http://www.tomshardware.com/answers/id-1877769/error-program-blocked-accessing-graphics-hardware-update.html
    In 8.1 there is a way to block applications from using the graphics hardware acceleration. Opening up the device manager [http://pcsupport.about.com/od/windows-8/a/device-manager-windows-8.htm]

  • HT1694 My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

    My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

    Your Settings app is crashing. Sometimes, the only way to fix this is by restoring the iOS software but hopefully it will not come to that.
    1. Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    2. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

  • My iphone shows a red circle alert but doesn't allow me to access it.  How do I get around this?

    My iphone shows a red circle alert but doesn't allow me to access it.  How do I get around this?

    Red circle alert to what?  Maybe post a screen shot of your issue.

  • 2630. java applications. Allow network access?

    when entering some java application on nokia 2630 ,for example google maps, it asks:
    "Allow network access? the application is not from a trusted supplier" for three times. On the fourth time: "try again later or try to install new version".
    Some other applications are working allmost properly... but they use to ask every 5-10 seconds the same question: "Allow network access? The application is not..."
    And some applications are working correctly. miniopera and jimm.
    So, the problem is not in gprs settings.
    What can i do with this problem?

    You can either try to get hold of a trusted build of the application you want to run or you can change the Application access setting. When you have an application selected, click Option then Application Access and set the Network access Ask first time only.
    Knowledge should be your Advisor when you need help.
    1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
    Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

  • I'm wanting to migrate certain applications from my MacBook Pro over to my newer Mini, but Migration Assistant doesn't allow doing this by choosing which applications to migrate-how can I pick only certain ones?

    I'm wanting to migrate certain applications from my MacBook Pro over to my newer Mini, but Migration Assistant doesn't allow doing this by choosing which applications to migrate-how can I pick only certain ones?

    You only bought it four months ago, so it's still under warrantly.
    Call Applecare or call your nearest Applestore to make an appointment. Tell them your mac has serious technical issues, describe them shortly.

  • TS4009 in my Imac I don't see the icloud icon, still have the mobile me and it doesn't allowe me to change that, what do i do please.

    in my Imac I don't see the icloud icon, still have the mobile me and it doesn't allowe me to change that, what do i do please.

    Please always state your operating system when you have a question. Lion 10.7.2 minimum is required for iCloud; the Preference pane does not appear in earlier systems.

  • My iphone 4s doesn´t allow me to access my wi-fi, the option is greyd out. What do i do???!

    My iphone 4s doesn´t allow me to access my wi-fi, the option is greyd out. What do i do???!

    Hello rgracamoura,
    The following article provides information that should help get your WiFi reenabled.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/TS1559
    Cheers,
    Allen

  • 5610 T-Mobile

    I was just browsing the net, and i founs this: http://www.phonemag.com/blog/wp-content/gallery/nokia-5610-xpressmusic-on-t-mobile/nokia_5610_1.jpg
    I read up a bit, and i found out that the T-Mobile version has no 3G. That's ok, but are there any differences, between the T-Mobile one and the original one? 
    Also, as you can clearly see from the picture, the music player is different. Is this just a skin, or is it due to some different software or something?

    I did try your suggestion and yes the 5610 will start without a sim inserted. Without the sim my browser is still labeled T-Zones, and certain T-Mobile files still existed and couldn't be deleted. I also got the same error when starting a couple of the same applications. No I didn't expect them to work, but I expected an error along the lines of no connection not the same application access not allowed. Honestly I had no doubt that they made changes which is why i have been giving them such a hard time, I was pretty sure I am being lied to. What this definetly tells me is that I could not just take this phone to another network and have it work correctly because that was an option. What it doesn't tell me is if I get a vanilla phone would I still have problems because of what is or perhaps isn't on the sim card? As far as I am concerned though my phone is defective since it does not work as it should, there is a big difference between cosmetic changes for branding and functional changes that alter the way the equipment works. If third party network applications do work on this phone then I would expect them to work on mine, Ya ok I could see T-Mobile disabling them through the sim so that those features can not be used on thier network (stupid but ok they have that right) but not breaking the phone to disable them after all this is now my phone and should I chose to move to a network that permits them (again an option I am considering) they should work since they are supported by the phone. 

  • Application access

    hello.
    i just recently bought a nokia 5610 xpress music phone and i downloaded a game on it.... nothing fancy just solitare and its a java file.....anyway when i try to open it, i get the message saying "application access set to not allowed"...
    I tried tweaking every setting i can see and still cant get it to work, i did a soft reset, and still doesnt work..
    and its not just that app,, anything i download will not let me access it.
    if you can help please do i would greatly appreciate it.
    Thank you

    Hi I have been searching hi and low for a solution on this topic but to no avail.
    I too own a Nokia 5310 music express with what seems to have some kind of restriction or block on it when it comes to downloading applications that are not pre authorized by my service provider (T-mobile)
    these are the apps that I have tried downloading and the error i receive in response
    app. Yahoo go
    Response= Certificate not on phone or SIM
    app. Google Maps does download but when I try access it i get
    Response= Application access set to not allowed
    app. Bodog Mobile does download but when I try access it i get
    Response: There was a problem creating the the HTTP connection.{ex=java.lang.SecurityException: Permission Denied}
    I have tried manually to allow or give permission for each app. but that option is not highlighted or accessible in the option menu for either app.
    Ive contacted my service provider and after having to go threw ridiculous trouble shooting procedure like "is your battery in place? is your phone switched on? is your battery fully charged?" etc etc. and educating there tech person, I was directed to nokia.com and told to download the "security settings and updates" specifically for my "nokia 5310 Express music" so I did but to no avail...
    I have also contacted Yahoo Mobile about this issue and received a reply asking me if I have either one of these two certificates on my phone
    GlobalSign Root CA
    Owner: Root CA
    Issuer: Root CA
    Valid from: 09/01/1998
    Valid until: 01/28/2014:
    Fingerprint: 2F:17:3F:7D:E9:96:67:AF:A5:7A:F8:0A:A21:B1:2F:AC:83:03:38
    Serial number: 02:00:00:00:00:006:78:B7:94:05
    Thawte Premium Server CA
    Owner: Certification Services Division
    Issuer: Certification Services Division
    Valid from: 08/01/1996
    Valid until: 12/31/2020
    Fingerprint: 62:7F:8D:78:27:65:63:992:7D:7F:90:44:C9:FE:B3:F3:3E:FA:9A
    Serial number: 01
    and yes I have both of them, just waiting on a response from them now....
    is there any hope?

  • During asynchronous method call, Firefox doesn't allow to navigate elsewhere

    Hi,
    I am using Jdeveloper 11.1.1.5.0 and my application is based on ADF and Webcenter Portal.
    Here is the scenario: My application has a home page which contains different regions. The page loads all the regions instead of one which is running with separate thread and taking long time. Now during the execution of long running task, if user wants to navigate to another page by clicking on a command link or goLink then it works on google chrome and IE but doesn't work with Firefox. In case of firefox once it seems to redirecting to desired url for a while but then it redirects back to same page. Surprisingly, It works perfectly once the execution of long running task is finished. So it seems problem with firefox's handling of asynchronous requests. I tried FacesContext.getCurrentInstance().getExternalContext().redirect(url) and setting the URL as destination for goLink to navigate. Below is the code for goLink and commandLink:
    <af:goLink id="pt_g22" text="#{node.title}" destination="#{contextroot}/faces/test.jsp" styleClass="#{node.selected ? 'ln_active' : ''}"/>
    <af:commandLink id="pt_c21" text="#{node.title}" action="pprnav" clientComponent="#{node.attributes['Target'] == '_popup' ? true : false}" styleClass="#{node.selected ? 'ln_active' : ''}" actionListener="#{MyBean.navigateToHere}" partialSubmit="true">
    in commandLink's actionListener method i am just having : FacesContext.getCurrentInstance().getExternalContext().redirect(url)
    Also, if i use navigationContext.processAction and action="pprnav" with commandLink then it works in FF as well but i want full page redirection instead of PPR
    Any help or suggestion is appreciated.
    Many Thanks,
    Jeetu

    Jose, your fix to problem 1 allows all access from the outside, assuming you applied the extended list to the outside interface.  Try to be more restrictive than an '...ip any any' rule for outside_in connections.  For instance, this is what I have for incoming VOIP (access list and nat rules):
    access list rule:
    access-list outside_access_in extended permit udp any object server range 9000 9049 log errors
    nat rule:
    nat (inside,outside) source static server interface service voip-range voip-range
    - 'server' is a network object *
    - 'voip-range' is a service group range
    I'd assume you can do something similar here in combination with my earlier comment:
    access-list incoming extended permit tcp any any eq 5900
    Can you explain your forwarding methodology a little more?  I'm by no means an expert on forwarding, but the way I read what you're trying to do is that you have an inbound VNC request coming in on 5900 and you want the firewall to figure out which host the request should go to.  Or is it vice-versa, the inbound VNC request can be on port 6001-6004 ?

  • Problem with constant "Allow application to use ne...

    I just bought this phone today (first Nokia phone) and I'm having a pretty irritating issue with the error message: "Allow application to use network and send or receive data?"  This seems to only happen with my Gmail, fring, and eBuddy applications.  My other applications (like Opera Mini for instance) will ask only once when the app first starts or not at all.
    After a bit of Googling and searching the forum I found out that I can go to Settings>Application Manager>Installed Apps, then click the program and change settings for Access Point and Network Access.  Only problem is that for the affected programs the only options under Network access are Ask every time and Not allowed.  I've tried closing the open program and trying this, as well as with it open.  I've also tried restarting the phone and uninstalling and reinstalling the phone but neither helped.  I'm a little stumped and this is a big issue for me since I am planning on using those applications pretty heavily so having to constantly select Yes everytime the program accesses the Internet will be annoying.
    Thanks in advance for any help.

    No, unfortunately.  I did a little more research and apparently the problem is caused by something AT&T did that doesn't allow unsigned apps to change permissions besides the Ask Everytime and Never Allow.  And it looks unlikely that the phone will be able to be unlocked or unbranded to change this since it uses different software or something.
    Which makes this phone worthless to me (well that, plus some other niggling issues).  I'm keeping it until my next paycheck, then taking it back and exchanging for another phone that will do what I want.  I'm a little upset at AT&T for crippling this phone like this, and I'm also upset at Nokia for allowing AT&T to cripple the phone so badly.
    And scooby, what do you mean by Maps?  I use the Google Maps app as well as the Telenav GPS app and neither one has a problem with receiving data.  I never get prompts from either program.

Maybe you are looking for

  • Error while setting up the ContentDB as the source for OSES

    Hello Experts, I am tring to create the ContentDB as the source to Oracle SES. 1. while creating the Identity plug-in for Oracle Internet Directory, I am passing the following information: Host name: hostname of the OID Port: 389 (non SSL) Use SSL: f

  • I cannot print pdf files after installing adobe reader

    I have installed adobe reader for Mac OS x. It shows it is installed but when I try printing a pdf file it won't print and it says I need to install it. What can I do?

  • Calling an external report

    Hi gurus....... When calling an external report the parameters or select-options specified in the external report can be called or not?

  • TS1424 Can't download for some reason

    Hey, I'm in my iTunes and I download a lot and haven't had this problem before but when I went to download a song it started to download and then just stopped and says 'download error. Tap to retry' so I did and every time I try 'unable to download'

  • Doubt: Interface

    One basic question, Please clarify. What is the contract of interface in java ?