564 replacement ink

I am out of the 564 black setup ink and cannot find replacement cartridges anywhere.   Any suggestions?  I do not want to buy a bundle with all the colors i have plenty of the other colors.  Thanks

Squatter,
I have a printer that uses this ink -- I buy it from HP:
HP SureSupply
The shipping is free (at least in the USA) and the product arrives very quickly.
You can buy just what you want:  size, individual colors, whatever.
Page yield estimates are available on the order page to help you decide which to order.
The prices (compared to my local stores) are comparable, ahtough I admit I do not check around.  I just buy ink and install it in the printer -- ink is not on the top of my "finance" budget items.  Smiling.
I expect most "online" stores carry this ink as well.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP. 
Kind Regards,
Dragon-Fur

Similar Messages

  • 6510 printer not printing Black ink Error: NON-HP INK ????? IT is an 564 HP INK Cartridge ???

    Subject:   I ran out off black ink 564. Cartridge         PS: I purchased this ink cartridge at Staples .
    Purchased new 564  XL cartridge for my HP 6510 printer. that is approx 1 year old
    Insatalled  new 564 XL ink Cartridge.
    Problem : does not print black ink.
    Error: Used or counterfit carteidges original hp ink depleted.
    Attention!
    HP'S cartridge warranty does not cover NON-HP INK or carteidges.
    HP warranty does not cover repairs or service required after using NON-HP INK.
    HP does not guarante the quality or reliability of NON-HP INK.
    I ran a test sheet, a quqlity report, status report & also cleaned the printable heads through the printers maintenace program, but still does not print black . PS: I removed the cartridge from the printer & shook the cartrige vigurosly & looked up at my whute walls that got splashed with black ink,so i know there is ink ink in the cartridge.
    I  think i have a bad carteidge ,there is a small gold tab at the end of the cartridge if soemthing is wrong at this gold strip will it not report to the software,just saying dont know ??????????   Thank you for any reliable feed back that i may get.
    Regards GJS

    Hello @johnnyboston and welcome to the HP Forums!
    I'm sorry to hear of your troubles with your Photosmart 6510 printer, but I will certainly do my best to lend a helping hand
    I will suggest that you try the steps in this 'Incompatible Ink Cartridge' or 'Indicated Ink Cartridge Must Be Replaced' Message Displays on the C...l document to see if you can get the printer to recognize the cartridge.
    Is it a genuine HP cartridge?
    Let me know how things go with the cleanings and we'll go from there!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Replacing ink cartridges

    I have a 7520 All in one printer and it has 4 small cartridges and 1 large black.  The small black is for photo and my question is, do I have to replace the small black cartridge since I have the large one.  Doesn't the printer use from the large 564 XL for all printing.  My old printer just had 4 cartridges and when I bought my color replacement ink I didn't get the small black one.  Do I really need it?

    So you're finding it hard to purchase the Photo Black? Any luck with SureSupply?
    https://h22203.www2.hp.com/SureSupply/
    http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-P​rinthead/Cartridge-Compatibility-how-to-find-out-w​...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • HP6520 How can I use a new, but protected, 564 XL ink cartridge from my broken 6510 printer.

    My 6510 failed after just over one year of use.  I salvaged a brand new 564XL ink cartridge to use in my new 6520.  Message says - HP protected cartridge installed.  Replace Cartridge. 
    I have three more new cartridges from the 6510, color, that likely will have the same problem when I install them.  How can I get them to work in my 6520.

    Hi tsuribaka,
    Welcome to the HP Forums! I understand that you are trying to use the HP 564  XL ink cartridge, from your broken HP Photosmart 6510 with your new HP Photosmart 6520. I am happy to help you with this issue!
    In order to use those old cartridges, you must first use the setup cartridges that came with the new printer, in order for it to initialize. Once you put in those old cartridges the setup cartridges will become unusable. I recommended using up the setup cartridges first, then use the old cartridges that you have.
    Make sure to store the old cartridges, in an air-tight container, such as a zip-lock bag, or a Tupperware container. In a cool, dry place.
    Hope this information helps you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Replacement ink for 6525 photosmart

    I bought replacement ink 564xl, all four colors and the black one dosen't fit, why? Can't I get a xl in black that will fit this machine?

    Which Black XL is it?
    New Smaller Body for HP 178, 364, 564, and 862 Black XL Ink Cartridges
    http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&lang=en&docname=c02750681
    Photo Black Ink Cartridges Renamed Photo Ink Cartridges
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=ie&lc=en&docname=c01839024
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Printer f2280 not printing after replacing ink

    I have replaced ink cartridges on my deskjet f2280,but indicator showing empty. Followed few ideas of pressing power and cancel to reset and replugged cable but no change. Covered ink cartrige at the back to reset ink still no change???Kindly advise plz

    Hello sergent6013,
    Welcome to the HP Forums.
    I see that after changing the inks in your Deskjet F2280 that the printer is still showing they're empty. I will try and assist you with this issue.
    Here is a document: Blinking Lights, that may be of use to you. It would guide through steps and causes as to what my be going on based on indicators on your printer.
    Also, this document: Faded or Dull Colors in Printouts, has a few steps that might be helpful too.
    Try a combination of both, and see how things go. If you need further help, or have questions please let me know.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Can i use use 564 xl ink in HP Photosmart 6520 e-All-in-One printer ?

    Can i use use 564 xl ink in HP Photosmart 6520 e-All-in-One printer ?
    Have seen some where online some people had problems when used 564XL ink.
    Thanks.

    Hi,
    Double post. Please use:
        http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Can-I-use-use-564-XL-ink-in-HP-Photosm...
    Thanks
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My epson NX420 got a paper jam.  I got the paper out but now the ink cartridge holder will not return to the usual place so I can replace ink.  It stays stuck in the corner and lid won't open.  Ideas?

    First time here; hope I'm not repeating.  Can't get my EpsonNX420 that I use with my MacBookPro to work correctly.  Had a paper jame.  Cleaned it out.  NOw the cartridge holder won't move from the corner so I can fully open it and replace ink.  Help

    Call Epson.  Tech support number is inside your user manual or E-mail us for assistance.

  • Replaced ink cartridge--still saying ink has run out

    replaced ink cartridge--still saying ink has run out-----ran cleaning---what now---mx882

    Hello.
    Please check to make sure that the correct genuine Canon ink tanks are installed.  The printer uses the following ink tanks:
    CLI-226BK
    CLI-226M
    CLI-226C
    PGI-225BK
    CLI-226Y
    If additional assistance is needed, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HP Photosmart D7560 replacement ink cartridges

    I need to replace the Black ink cartridge in my D7560 printer.
    When I went to install the replacement cartridge it was nearly 1/8" wider than the original, and will not fit in the print head?
    I bought 4 of these for when replacements were needed. All are HP's, Photosmart 564 black. The boxes are all marked HP CB316WN Option 140, and say clearly they are for my D7560 printer. What gives here?
    Marc, waiting to print

    Hi Gwain,
    You certainly do have the right product for your printer. The cartridge should fit, but might be a bit snug.
    Your printer takes 5 cartridges. The black cartridge you're trying to use should install on the right side, slightly separate from the color pack (the Cyan, Magenta, Yellow, and Black photo). It won't fit into the black photo slot. Take a look at the cartridge replacement instructions on http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01500662&cc=us&dlc=en&lc=en&product=3396085&tmp... and let me know if that works for you.
    Thank you,
    Narissara
    I work for HP.
    Did my response help with your issue? Please give me Kudos by clicking the "Kudos" button to the left. Thank you!

  • Blurred Photo Printing after replacing ink cartridges

    Hi everyone,
    First post on here! I have a PSC 1355, which has always printed very good quality photographs, until yesterday. The old HP ink cartridges (Tricolor and Photo) were both low on ink so I replaced them with new HP ones (identical models) and ran the alignment procedure. There were no messages to say the alignment failed, but now the photos are printing blurred as if the cartridges are not aligned. There appears to be a slight overrun of ink outside the border of the print, which suggests misalignment to me.
    I put the old cartridges back and aligned them, but they now print blurred too. I reprinted a picture I'd previously printed to compare - the original print was pin sharp, but the new one is very blurred. I've cleaned the cartridges using the utility but no change. Paper is good quality HP photo paper, the same as I was using before. I haven't changed any other settings, print preferences, etc. Any ideas anyone??
    Thanks. 

    I am going to ask the very obvious question:
    You did get each cartridge in the correct place?
    You are using genuine Canon cartridges and not off brand or refills? <-----this is very important
    You have the correct paper settings?
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • IJ Canon Printer Utility disappeared after I replaced ink cartridges.

    I just replaced the ink cartridges with ones I ordered from eforcity and it prints fine, but I haven't been able to locate the printer utility box ever since which means I haven't been able to check ink levels and clean the nozzles. This is really frustrating because I need to clean the print nozzles now. Every line on my printouts is streaking (half dark / half faded). Help! Thanks.

    Hi , Welcome to the HP Forums! I see that you cannot print with your HP Officejet Pro 8500A, on Windows 7, after replacing your Ink Cartridges. I am happy to help!  Please, try the steps within this guide, Fixing Print Quality Problems for the HP Officejet Pro 8500A e-All-in-One Printer Series. If the guide does not resolve your issue, Please contact HP, phone support for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Hope this helps!  “Please click the Thumbs up icon below to thank me for responding.”

  • 564 black ink - printer using photo ink for general printing!

    I ran out of regular black ink for my Photosmart C6380 a couple of weeks ago.  Had a full cartridge of photo black, but none was used - pages were very faint gray.  After replacing the empty cartridge with a 564XL, I see that my photo black is now half empty while the regular black ink is full and has not been touched at all!!  Where's the confusion?  How do I make the printer draw from the standard ink cartridge instead of the photo?  It won't work without every cartridge in place.

    Hi Selig,
    Thanks for posting you issue on forum,
    From what i understand you would like to Print use black ink only instead of photo black.
    You have an option under the printer driver which says Black ink only, by selecting that you will not be able to print color. On most cases this should help you use the black cartridge over the photo black.
    If you have to print color you might need to change this option,
    I dont have the printer over here but the steps are from best of my knowledge.
    Go to Control Panel>> Devices and Printers>> Highlight Printer>>Right click on Printer and click Printing Preferences.
    Click on Advance>>click on the drop down for Print in Greyscale and select Black Ink only
    with newer driver we have this option under Printing Preferences>>Paper/Quality tab and under Quality settings.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Say thanks by clicking the "Kudos! Star" which is on the left
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

  • Printer screen frozen after replacing ink cartridge

    My Cyan ink cartridge was empty. I replaced it. The printer screen is stuck on the message "Genuine HP ink cartridges installed" with an "OK" at the bottom. Does not respond to pressing OK. The printer is clunking and chunking for a while, then does nothing. The message never changes. I've powered off and on multiple times. Unplugged the power cord from both ends. Tried to reinitialize software, but can't do it because the screen is unavailable for me to perform the tasks necessary. Help!? (Please)

    Hi @lynetteheims 
    Please take a look at the following post by Ciara_B; Black not printing on Officejet 4620, Photosmart 6520, Photosmart 5520, Deskjet 3520.
    If the issue persists, Please be sure to call us. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • 8500A won't print since I replaced ink cartridges.

    Hi.  Ever since I replaced all the ink cartridges (with genuine HP parts)  on my printer it won't print except very faintly in two of the colours, and not at all in the other two.  I've cleaned the printheads, and tried to align the printheads.  Aligning the printheads failed.  Why would the printer suddently stop working after replacing the cartridges, and what else can I do to fix the problem?  I found a page about replacing the printheads, but can't find any info any where about where to buy these parts or how much they cost.  I tried to find a repair place near me but the search came up with no results.  Any help you can provide would be appreciated.

    Hi , Welcome to the HP Forums! I see that you cannot print with your HP Officejet Pro 8500A, on Windows 7, after replacing your Ink Cartridges. I am happy to help!  Please, try the steps within this guide, Fixing Print Quality Problems for the HP Officejet Pro 8500A e-All-in-One Printer Series. If the guide does not resolve your issue, Please contact HP, phone support for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Hope this helps!  “Please click the Thumbs up icon below to thank me for responding.”

Maybe you are looking for

  • Had to buy a new printer

    Ive been struggling to get my trusty old HP Photosmart 1215 printer to work on my two Leopard machines. Ive tried every piece of hackery to get this thing to work, up until the point that I just gave up. I have reconciled with the fact that HP is not

  • Run report cause "The page cannot be displayed"  OR The connection with the

    Hello, 1. Database oracle 10g R2 on windows 2003 server enterprise edition with SP2 2. Application Server Oracle 10g R2 on Windows 2003 Server with SP2. Problem explanation one of our branch which is connected via leased line is unable to run some of

  • Application Error has occurred in your process Leave of Absence performed

    Hello, We have a leave process in SSHR Module.When we create a leave and send it for an approval then it is approved without an error. But when we update the leave and send it again for an approval then We are getting below error. Application Error h

  • Weblogic (10.3.4) & Forms (11.1.1.3) manual start linux

    Hi, I am a complete newbie about Oracle Products. This is the first time I install an Oracle product. I never imagined that it will be that complicated. Goal: install Forms 11g How: I installed Weblogic 10.3.4 and tried to install Forms&Reports. I ru

  • Blank report export to CSV fails

    Using the latest version of Crystal Reports runtime for Java, I'm trying to export a blank report to character-separated values (CSV).  The export fails when I try to call PrintOutputController.export().  Specifically, code execution appears to halt