5700 issues

I am not able to disable the flash light. Though I can set it to off, the next time I open the application, the selection reverts to "automatic". This is very annoying. I really dont want to use flash.
I am not able to disable the flash sound when a photo is taken.
I kindly request you to provide a solution.
Nokia guyz, please try and fix these in your firmware, hope to see the firmware soon.
Regards

Also, I want to turn off camera taking sound!! I am trying to disable all notice sounds in active preferences!!
Please add an option for this!

Similar Messages

  • ATI 5700 HD & 32" TV --- Screen resolution Issue

    Hey all,
    I recently set up a media center using arch as my distro.  Everything works great!  The only problem I have is that my screen resolution isn't perfect.
    I have an ATI 5700 HD, I'm using the open source drivers.  I have a Philips 32" 1080p TV --- optimal resolution is 1920x1080.
    I'm using gnome, and under System > Administration > Monitors the correct resolution is shown.  However, I can clearly see a half-inch thick border around my screen!  I know this isn't correct, because my old acer aspire revo (using the nvidia blobs) can show the entire screen at the same resolution!
    I have no intention of using the catalyst drivers but I fear that I may have to in order to get this working!  Any ideas?
    Attached is my xorg.conf config (I know it's unnecessary, but I generated it anyways).
    My question: can I have full screen resolution WITHOUT using the closed-source tools & drivers?
    Thanks
    xorg.conf :  http://pastebin.com/B4iEqTrM

    I dropped the above into a shell script and added it to gnome startup, which worked but looked ugly.  I then tried creating a .desktop file in ~/.config/autostarts/ but that looked ugly too...
    so I added it to ~/.xinitrc as
    exec xrandr --output HDMI-0 --set underscan off &
    And that didn't work at all.
    Anyone have any better way of implementing this on a more permanent (and dare i say elegant) level? I mucked with xorg.conf but that didn't work.
    Last edited by yochaigal (2011-03-14 06:47:02)

  • Inspire 5700 optical SPDIF issue

    I'm using my old Inspire 5700 for surround sound in the basement. I have my Directv HD reciever hooked up to it via optical spdif. I have the Directv receiver set to Dolby Digital. If I am watching a channel that is not DD and switch to a channel that is DD, the 5700 switches over to DD just fine. However, if I go back to a non DD channel, I get no sound. I either have to power off the 5700 and power it back on or hit the Pro Logic button on the remote to get sound back for the non DD channel.
    Any ideas?

    Well, here it is 2006 and people are still having problems with their inspire 5700 systems!! Amazing is'nt it's I bet you all thought I was gone forever but I'm not!! Do you think that Creative has determined that there is a problem with this system? Heck no!! you people are just unlucky according them. I'll be here forever because I don't like getting ripped off by big companies. Have a nice day and talk to you soon.
    Mr. Dave

  • Inspire 5700 Dig. Subwoofer Issue

    Aparently, my subwoofer wont work if I dont unplug it from the decoder and plug it back again and some times that doesnt work so I have to try again till it get on.
    I know when it works because the times it doesnt I can hear the subwoofer making a little sound when the cable plug gets in touch with the decoder subwoofer output and I know when it works because I dont get any sound when connecting it but is seems that I have to connect it very slowly.
    Other thing is that when the subwoofer volume is 3/4 and the master volume is 3/4 +/- big "BOOMS" can shut it off having me to reconnect it.
    I cannot imagine what the problem is but when I connect the subwoofer to any satellite output it works pretty fine (or at least, it sounds not with the intended sound) showing that the sub-cable or OK.
    Any help is well aprecciated

    Creative speakers have their own built-in crossover networks so you don't have to worry about setting an external crossover. If your receiver requires a crossover frequency to be set, then 20 Hz should be ok, this is the upper limit'sfor Dolby low frequency effects.

  • After several repairs, still having heating issue with MacBook Pro (mid '09)

    EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
    This is going to be a lengthy post, so bear with me.
    2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
    The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
    So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
    On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
    Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
    After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
    We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
    - In total 3 new logic boards
    - New MagSafe (because they discovered it was giving too much power too my laptop)
    - Fresh re-install
    - Replaced RAM
    - Checked fans etc. (they do this by default)
    - A few tests which proved that it was repaired (but I have my doubts with these tests...)
    They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
    They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
    This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
    I've got more information regarding the issues if needed, ask away. I'm getting desperate.
    I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
    I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
    Nick.

    Thought of buying Parallels? Fusion?
    Might want to see if this gets moved to the MacBook Pro forum.
    I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver.

  • TS1702 Hello I would like to report game loft order and chaos that's I but rune stones buy my visa around 300 usd and runes was on sale but thy don't add the rune stones it's 5700 Rune stones  I report to game loft 6 time and thy ignore me I'm here to Com

    Hello I would like to report game loft order and chaos that's I but rune stones buy my visa around 300 usd and runes was on sale but thy don't add the rune stones it's 5700 Rune stones  I report to game loft 6 time and thy ignore me I'm here to Complaint that to iTunes I wish you help me for this complaint cause this game loft always ignore people only take moony and no replay . Ty

    You are not addresing Apple here. Were are all just users like yourself. Contact Apple/iTunes by:
    How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase

  • ITunes and iPhone 4 sync issues with Windows 7 64 bit

    I am getting several errors with sync'ing iTunes to my iPhone on windows7 64bit. I reinstalled iTunes, I did a repair on iTunes, even tried a RESTORE on iPhone, but it gives me so many errors one after another after another.
    1. Some of the items were NOT copied to iPhone "iPhone" because one ore more errors occured.
    2. Attempting to copy to the disk "iPhone" failed. An internal device error occured.
    3. The iPhone "iPhone" can NOT be synced. An unknown error occured (0xE8004006).
    4. The iPhone "iPhone" can not be synced. The required file can not be found.
    5. The iPhone "iPhone" can not be synced. A duplicate filename was specified.
    6. The iPhone "iPhone" can not be synced. An internal device error occured.
    These errors keep appearing one after the other.
    I have fully uninstalled iTunes and ALL Apple programs from my PC, rebooted, disabled antivirus/firewall software, etc.
    I have tried changing time zones.
    I have created a new user account on same laptop and still have same issues with iTunes.
    Restore fails with error "Unable to read file or file is corrupt".
    Yet iTunes works fine on a 32bit operating system of Windows 7.
    The problem is that I upgraded my laptop and the new laptop is Win7 64bit. I have ALL the newest drivers, and I checked to ensure it was not a BIOS or CHIPSET driver causing issues. All windows updates are up to date and current.
    I have been trying for over a week with every piece of trouble shooting I can find to make this work.
    Any help or further information would be VERY GREATLY APPRECIATED.
    Thanks in Advance

    I too am having the exact same issues on the same laptop! I spent an hour last night with "supervisor" in tech support who didn't solve my problem but did close the ticket (210757099 for any Apple people that might read this). Thanks a lot Ben!
    I have seven ipod/iphone/ipad devices so I am very familiar with how to sync. In the last few weeks, version 10.2 of iTunes (I'm up to 10.2.1.1) has gotten less and less reliable in successfully sync'ing to the devices. It started out with my 3GS, but my iPhone 4 was fine. Then I got an iPad2 and now NOTHING will sync properly. Every time I plug one in (or press the sync button) it wants to do a restore from the backup made the last time it sync'd. It does that, reboots the device and sync's.
    I've gotten a ton of errors, here's a sample.
    iBooks couldn't be installed on my iPhone unknown error 0xE800000C
    Textie couldn't be installed on my iPhone, unknown error 0xE8000013
    "failed required file not found" - This is one of my favorite error messages. It demonstrates how Apple is becoming like Microsoft. It is 100% accurate and totally useless. It would be helpful if it told me the NAME of the file that was not found...
    unknown error 0xE8004006
    "duplicate file found" - Again, in true Microsoft form, it didn't tell me the NAME of the file that was duplicated.
    I tried everything discussed in the following thread but it did not work.
    http://discussions.apple.com/thread.jspa?threadID=2401822
    Stopping the enhanced USB controller didn't work. Mine is the Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller (version 9.1.1.1020).
    A few days ago I got hundreds of errors in a sync. When it completed, a dialogbox came up asking if I wanted to send this crash report to Apple, I said yes. So, crash reports are now automatically being sent. You can see evidence of this in the %appdata%\Apple Computer\Logs directory.
    This section of the log looked interesting because it says it couldn't connect to USB mux port 32498
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionReceiveMessage (thread 4232): Could not receive size of message: 0 No error
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] readthread (thread 4232): Could not receive message: 0xe8000001
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionSendMessage (thread 2504): Could not send message size: No error
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] connect_toport (thread 5700): Could not connect to USB mux port 32498 for device 3: Input/output error
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] MobileDeviceConnectlocked (thread 5700): Could not connect to lockdown port on device
    Just grasping at straws here....

  • Issues with 64 bit version of PS CS6 and now CC hanging, also sniffer_gpu.exe

    I cannot use the 64 bit version of Photoshop for awhile now. I had hoped that with CC coming out that would fix the problem, but it hasn't. I am able to use the 32 bit version, so after putting some time in with Adobe tech support to no avail after some hours, I'd just used that, but with the problem continuing in the latest edition I figured I should deal with it.
    I am running Windows 7 pro, an intel core i7 950 processor, and an AMD (ATI) Radeon HD 5700 video card.
    Both 64 bit versions of Photoshop hang for me before I can open any file. Looking in the resource monitor, at the wait chain, it states, 'one or more threads of Photoshop.exe are waiting to finish network I/O.'. The only way I can close the app then is by manually killing it in task manager or resource monitor.
    One thing I've noticed that may or may not be related, sniffer_gpu.exe only appears in the resource monitor while running a 64 bit version of Photoshop, both CS6 and CC. Once it appears, it seems to continually use 12% of my cpu, and even after I kill Photoshop, it continues to run and use 12% of my cpu, until I kill it as well. This does not happen at all when I run the 32 bit versions, I do not even see sniffer_gpu.exe appear.
    Anyone have a clue what the problem might be?

    Way back when, I did indeed uninstall and reinstall my Catalyst drivers, still no luck, still same problem.
    Finally today, some 6 months later, I was again dealing with Photoshop Phone tech support for another hour or two, including much hold time, finally having the issue excalated, as all software and drivers seemed up to date, and yet all versions of the gpu sniffer program still could not identify my gpu.
    After I got off the phone with them, I went to the AMD site and followed instructions on how to uninstall and reinstall their software. One step I had not thought of or tried was, after uninstalling the Catalyst software, repairing the .Net 4.5.1 framework through the Microsoft site before reinstalling the Catalyst software. It somehow seems that though the Catalyst installer software supposedly installs the .Net 4.5 framework, it cannot, unless the framework is already installed...
    Anyway, this does seem to have finally gotten the 64bit Version of Photoshop to finally work on my desktop.

  • Inbound UMS Adapter Issues with Receiving Emails from Lotus Notes

    Hi,
    I have this requirement in my project where I need to read the mails from a particular Email Account which has been created in Lotus Notes. The IMAP Host and port is enabled for the same and I am setting all these in my Server's EM Console UMS Driver settings. I have provided all the Details required for Incoming Email Driver setup like: IncomingMailID, IncomingMailServer, Port, Server Type: IMAP, IncomingMailIDs etc. I have followed all the steps mentioned in regular UMS Adapter Documentation and Blogs.
    I can see that Soa-infra is able to access all the mails from this mail Account and I can see the same in the managed server log files also. But the issue is with the BPEL Process which I have created with the Inbound UMS adapter. This process has UMS inbound adapter with the Email address same as the one defined in UMS Configuration in EM Console.
    The Process is not getting triggered at all whenever a new mail comes to the mail id. I am not sure what is the issue. If anyone has faced similar issue please let me know the solution for the same.
    Also 1 strange thing I observed is, if I go to the Soa-infra proerties-> Human Workflow Management and Test the notification by sending mail to the IncomingMailId, the Process is getting triggered, but if I send a mail from any other gmail/any other account to the IncomingMailID set in Process and server, the Process is not getting triggered.
    In the logs I see the following Error messages which I don't think would be impacting the Process to receive messages as soa-infra is able to pick the messages without any issues.
            at javax.mail.internet.MimePartDataSource.getInputStream(MimePartDataSou
    rce.java:119)
            at javax.activation.DataHandler.getInputStream(DataHandler.java:223)
            at javax.mail.internet.MimeBodyPart.getInputStream(MimeBodyPart.java:573
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.copyCo
    ntent(EmailResourceAdapter.java:998)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.copyCo
    ntent(EmailResourceAdapter.java:1023)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.create
    IncomingMessage(EmailResourceAdapter.java:593)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:440)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:394)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.fetchN
    ewMailFromStore(EmailResourceAdapter.java:357)
            at oracle.sdpinternal.messaging.driver.email.MailboxPollingWorker.run(Ma
    ilboxPollingWorker.java:49)
            at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
            at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
            at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:545)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    <31/07/2014 5:44:06 PM EST> <Warning> <oracle.sdp.messaging.driver.email> <SDP-2
    5700> <An unexpected exception was caught.
    javax.mail.FolderClosedException
            at com.sun.mail.imap.IMAPMessage.getProtocol(IMAPMessage.java:149)
            at com.sun.mail.imap.IMAPMessage.setFlags(IMAPMessage.java:871)
            at javax.mail.Message.setFlag(Message.java:578)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:501)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:394)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.fetchN
    ewMailFromStore(EmailResourceAdapter.java:357)
            at oracle.sdpinternal.messaging.driver.email.MailboxPollingWorker.run(Ma
    ilboxPollingWorker.java:49)
            at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
            at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
            at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:545)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    <31/07/2014 5:44:06 PM EST> <Warning> <oracle.sdp.messaging.driver.email> <SDP-2
    5700> <An unexpected exception was caught.
    javax.mail.FolderClosedException
            at com.sun.mail.imap.IMAPMessage.getProtocol(IMAPMessage.java:149)
            at com.sun.mail.imap.IMAPMessage.getHeader(IMAPMessage.java:715)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.getMes
    sageID(EmailResourceAdapter.java:1415)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:417)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:394)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.fetchN
    ewMailFromStore(EmailResourceAdapter.java:357)
            at oracle.sdpinternal.messaging.driver.email.MailboxPollingWorker.run(Ma
    ilboxPollingWorker.java:49)
            at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
            at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
            at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:545)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Hi,
    I have this requirement in my project where I need to read the mails from a particular Email Account which has been created in Lotus Notes. The IMAP Host and port is enabled for the same and I am setting all these in my Server's EM Console UMS Driver settings. I have provided all the Details required for Incoming Email Driver setup like: IncomingMailID, IncomingMailServer, Port, Server Type: IMAP, IncomingMailIDs etc. I have followed all the steps mentioned in regular UMS Adapter Documentation and Blogs.
    I can see that Soa-infra is able to access all the mails from this mail Account and I can see the same in the managed server log files also. But the issue is with the BPEL Process which I have created with the Inbound UMS adapter. This process has UMS inbound adapter with the Email address same as the one defined in UMS Configuration in EM Console.
    The Process is not getting triggered at all whenever a new mail comes to the mail id. I am not sure what is the issue. If anyone has faced similar issue please let me know the solution for the same.
    Also 1 strange thing I observed is, if I go to the Soa-infra proerties-> Human Workflow Management and Test the notification by sending mail to the IncomingMailId, the Process is getting triggered, but if I send a mail from any other gmail/any other account to the IncomingMailID set in Process and server, the Process is not getting triggered.
    In the logs I see the following Error messages which I don't think would be impacting the Process to receive messages as soa-infra is able to pick the messages without any issues.
            at javax.mail.internet.MimePartDataSource.getInputStream(MimePartDataSou
    rce.java:119)
            at javax.activation.DataHandler.getInputStream(DataHandler.java:223)
            at javax.mail.internet.MimeBodyPart.getInputStream(MimeBodyPart.java:573
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.copyCo
    ntent(EmailResourceAdapter.java:998)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.copyCo
    ntent(EmailResourceAdapter.java:1023)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.create
    IncomingMessage(EmailResourceAdapter.java:593)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:440)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:394)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.fetchN
    ewMailFromStore(EmailResourceAdapter.java:357)
            at oracle.sdpinternal.messaging.driver.email.MailboxPollingWorker.run(Ma
    ilboxPollingWorker.java:49)
            at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
            at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
            at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:545)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    <31/07/2014 5:44:06 PM EST> <Warning> <oracle.sdp.messaging.driver.email> <SDP-2
    5700> <An unexpected exception was caught.
    javax.mail.FolderClosedException
            at com.sun.mail.imap.IMAPMessage.getProtocol(IMAPMessage.java:149)
            at com.sun.mail.imap.IMAPMessage.setFlags(IMAPMessage.java:871)
            at javax.mail.Message.setFlag(Message.java:578)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:501)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:394)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.fetchN
    ewMailFromStore(EmailResourceAdapter.java:357)
            at oracle.sdpinternal.messaging.driver.email.MailboxPollingWorker.run(Ma
    ilboxPollingWorker.java:49)
            at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
            at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
            at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:545)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    <31/07/2014 5:44:06 PM EST> <Warning> <oracle.sdp.messaging.driver.email> <SDP-2
    5700> <An unexpected exception was caught.
    javax.mail.FolderClosedException
            at com.sun.mail.imap.IMAPMessage.getProtocol(IMAPMessage.java:149)
            at com.sun.mail.imap.IMAPMessage.getHeader(IMAPMessage.java:715)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.getMes
    sageID(EmailResourceAdapter.java:1415)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:417)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.onMess
    age(EmailResourceAdapter.java:394)
            at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter.fetchN
    ewMailFromStore(EmailResourceAdapter.java:357)
            at oracle.sdpinternal.messaging.driver.email.MailboxPollingWorker.run(Ma
    ilboxPollingWorker.java:49)
            at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
            at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
            at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:545)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  • Digital 5700 Decoder

    Hi,I have an issue with the Inspire 5.1 Digital 5700 decoder( I did log a call with Customer Services, but I'll get to that in a bit!). Essentially, when I power the on, the LED light goes from red to green. I then select the output I require? everything is fine. Seconds later, the unit switches itself off and the LED light goes back to red! When I try to turn it back on again, it always goes back to red. I logged a call with Customer Services, who asked what happens when I "gently tap" the unit. The LED does go to green, but eventually goes back to red again. Customer Services also asked me for the serial number, which I duly provided (CAMF375047000040N). They came back saying that they had no record of that serial number on their system. I even took photos of the unit with the SN and sent them across, but they still came asking me for proof of purchase and a 3rd confirmation of the SN. I'm at a bit of a loss as I no longer have the proof of purchase. The unit is 2.5 years old, and possible out of warranty. But I would like to know if what is happening with the unit is a common problem and if there is a fix? If there isn't, then I'll have to throw everything away and start again. Many thanks

    MasterRusty,
    I have a post on here titled "inspire 5700's are junk" from back in Dec 2004, you are having the same problem with yours that I had so don't worry they will quit working altogether very soon. The digital decoder goes out in them usually within a year AFTER the warranty goes out so creative just says " oh well they are more than year old so too bad" I know from experience with them. There is nothing you can do about this except to pack them up and buy another brand. I stated before that maybe if enough people wrote in stating their problems with this system that maybe just maybe creative would realize that there really is a problem here and they would take a serious look into it and admit that yes we screwed up here and we will fix the problem for our customers, but I really doubt it because as I said before " they are the big company and we are the little people". I was told that "we can't offer unlimited warranties on our products" which I understand; but if you look at some of the other speaker companies they offer 2,3 even 4 year warranties, but again as I said you are really out of luck. I would really like to see Creative make a liar out of me and look into the problem and make things right for us, but I feel that is only a wish that won't come true.
    good luck,
    MrDave

  • 5700 : Turn Off

    Hi,
    I'm facing a problem with 5700 xpress music. The lower part of the phone can be turned to switch between Phone, Music player and camer mode. If I turn the lower part Phone is turned off and its very pain full to every time to turn on the phone and most anoying part is I cannot take the picture. Intially features were working fine but I faced some problem with browsing then I left couple of days at the Nokia care centre after that I'm facing the problem. 

    Hello marykennedy,
    Unfortunately, when the 5700 error repeatedly displays on the printer, the printer will require servicing to determine the exact cause of the issue.  Please click on the Contact Us link below to obtain servicing options.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • 5700 locking up with bluetooth

    Hi, I have a 5700 that really is starting to annoy me,when I'm connected to my tomtom car kit it will work fine then my phone will just lock up and all I can do is pull the battery to reboot it.
    I reset factory settings all the time and it does not fix the problem. It can work great for a few days then need rebooting 4 times to make a phone call.
    It also does it on my interphone headset for my motor bike.
    Sometimes when my phone is ringing it will be through the car kit then the phone speaker rings as well and when I answer the phone It will be on the car kit and phone loudspeaker at the same time then the phone will lock up again.
    This is driving me nuts
    The reason I bought Nokia was to have a trouble free phone instead I got this bug ridden useless lump of plastic.
    What can I do to fix this

    Are there any more details you can provide?  I would have included the following if I were asking the question:
    iMac model (e.g. early 2008)
    Amount of RAM memory installed
    A detailed description of "lockup" (e.g. "It locks up every time I launch iPhoto") and whether it's consistent or sporadic.
    If this iMac has multiple accounts, does it happen with all of them?
    What I've already tried to correct the issue
    Of course, there may be folks here with better telepathy skills than I possess.

  • 5700 Hardware problems

    Hi I have Nokia 5700 music xpress,
    I purchased this cell in Nov. 2007, it works fine but after an year there is some Hardware/ software issue.
    In this phone when we twist camera is activate and we can take picture. and when we Twist 360 . its work as music player.
    When i twist for camera its start music player and when i restore the position , the keypad stop working and I have to restart the phone.
    Please help me with this issue. 

    Hi Wasim
    I'm facing the same problem. Could you figure out any solution for this  ?

  • 5700 XpressMusic allows to connect to PC only in P...

    Hi guys,
    i'm having an issue with my 5700, in the last few days (i don't know why) it i connect my mobile to my PC with the USB cable it won't let me pick if i want to connect with Pc Suite or using it as an external archive.
    I've been checking in the Setting-USB menu and i have: the first row (where it should let me pick which way i want to connect my mobile) that is empty, and if i click on it (or click on options-change) it just quits the menu. In the second row where it let me pick if i want the device to ask me which way to connect i selected YES.
    but still when i connect my device with USB it connects by itself in PC Suite mode. why? and how to solve this?
    Using driver detective i've noticed that the NOKIA USB ROM driver is missing (No driver found for your device) maybe this could be related with my connection issue?
    If yes how to find and install this NOKIA USB ROM driver?
    thanks in advance,

    ps: tried to edit the post but it won't let me do it... i've uninstalled PC Suite with PC Suite cleaner and then re-installed and connected the mobile to the PC. it finds the new hardware, loads all the drivers, but still got that NOKIA USB ROM missing driver, and still can't select the way i want to connect the mobile to the pc

  • Nokia 301 Dual SIM - Issues opening message folder...

    Nokia as a company should be ashamed of manufacturing a phone like this(irrespective of if this is a issue with software or handset or both). I bought this assuming Nokia is a robust stable phone (Already have S3, but need a dual sim compact phone).
    But lately i have been getting "Message storage memory not ready" when i try to open inbox or conversation folder (under 'Messages' menu). 
    Tried Hard Reset / Soft Reset and nothing worked. Restared the mobile and this did not work too (SIM Out, IN and Restart did work either) Couple of times after reset it worked fine. But after few minutes, it again showed up the same error message.
    This is no abuse, but for Rs. 5700 that i paid this problem is bull **bleep**ting. And i would not expect this kind of useless product from Nokia. 
    And the hand set (Hands Free) that came with this phone does not stay in my ears even for a minute, it keeps falling. 
    Be ashamed Nokia.
    Phone is still in warranty, not sure what i can do with the warranty as iam out of the country now.
    IAM NEVER EVER BUYING A NOKIA AGAIN.
    Any solution to this issue will be greatly appreciated.
    Thanks guys

    TrueLies1,
    Warranty covers both parts and labour services that will be rendered to the phone. The device might get repaired or replaced with a new one depending on the evaluation made by the Care Point specialist.
    You may try to send the the phone along with its box to the Care Point for warranty validation purposes. You may also locate the nearest Nokia Care Point by accessing this page at nokia.ly/1oj1joQ.
    Good luck

Maybe you are looking for

  • Virtual PC or Buy a PC?

    I've been "PC" free for for about four years now and have gotten along quite well thank you! But, I've run into a number of applications (like Garmin GPS setup and map update) that I need a PC to in order to run them. Because I have 3 G4's, I don't w

  • BPC 7M SP6 - best practice for multi server setup

    Experts, We are considering purchasing new hardware for our BPC 7M implementation. My question is what is the recommended or best practice setup for SQL and Analysis Services? Should they be on the same server or each on a dedicated server? The hardw

  • Running multiple Crystal engines

    Hello, Currently, we have an application that has worked quite well with multiple crystal engines installed.  A client can have a report that exports as they expect in say Crystal Reports 10 and also create new reports against Crystal Reports 11 (or

  • IBook G4 800mhz processor update?

    I own a iBook G4 800mhz processor with 640mb ram. On another website I read "If you had an iBook G4 800, you can easily swap out the 800mhz board for a 1ghz" 1. Is this true and where does one obtain a 1ghz processor for my type of iBook? 2. Will thi

  • Separate Header Footer Backgrounds

    Is there a way possible to specify different backgrounds for the header and footer in iWeb. As of now it seems you can only specify the page and browser backgounds. Any work around to specify different repeating backgrounds in a header and footer? Th