5700 locking up with bluetooth

Hi, I have a 5700 that really is starting to annoy me,when I'm connected to my tomtom car kit it will work fine then my phone will just lock up and all I can do is pull the battery to reboot it.
I reset factory settings all the time and it does not fix the problem. It can work great for a few days then need rebooting 4 times to make a phone call.
It also does it on my interphone headset for my motor bike.
Sometimes when my phone is ringing it will be through the car kit then the phone speaker rings as well and when I answer the phone It will be on the car kit and phone loudspeaker at the same time then the phone will lock up again.
This is driving me nuts
The reason I bought Nokia was to have a trouble free phone instead I got this bug ridden useless lump of plastic.
What can I do to fix this

Are there any more details you can provide? I would have included the following if I were asking the question:
iMac model (e.g. early 2008)
Amount of RAM memory installed
A detailed description of "lockup" (e.g. "It locks up every time I launch iPhoto") and whether it's consistent or sporadic.
If this iMac has multiple accounts, does it happen with all of them?
What I've already tried to correct the issue
Of course, there may be folks here with better telepathy skills than I possess.

Similar Messages

What's the deal with bluetooth mice ?

What's the deal with bluetooth mice ? I've never heard of any model yet that didn't come with loads of complain... (I've done my research) ... isn't there one that just works fine and that will for a few years like a standard mouse ?
I would really like one with my macbook, any recommendation, something portable, that matches well my hardware would be nice.
Or should I just wait until bluetooth mice technology works flawlessly ? What about you ?
Francis.

I've had a Macally BtMouseJr for a couple of years now, it's fairly basic but every time I've tried to replace it with a "better' one I've had to come back because of lock ups, losing the mouse altogether, slow response, random movements et al.
Therefore the BtMouseJr is the ONLY one I can actually recommend (I retract my prvious recommendation of the Sony vaio mouse - it's nice but it doesn't always work and eats batteries) wholeheartedly.
see it here.

We have an iMac 24-inch Mid 2007 with maximum of 4G bytes of SDRAM, with OX X 10.9.4 Mavericks. It is routinely locking-up with the rainbow wheel. Especially with iTunes and Safari. Ideas?

We have an iMac 24-inch Mid 2007 with maximum of 4G bytes of SDRAM, with OX X 10.9.4 Mavericks. It is routinely locking-up with the rainbow wheel. Especially with iTunes and Safari.
I'm wondering it it that Mavericks simply uses more RA that the machine allows when also running application, but I don't see the RAM is being maxed out per se' when in Activity Monitor either. I've also ran the Disk Utility and have run scans wit Sophos, looking for malware, but have found no issues.
Any ideas? Any better Malware/Spyware applications?
Help!

Here is the report:
EtreCheck version: 1.9.14 (50)
Report generated August 18, 2014 at 6:05:39 PM PDT
Hardware Information: ?
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information: ?
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 1 day 4:11:27
Disk Information: ?
Hitachi HDS721010KLA330 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Thomas iMac (disk0s2) / [Startup]: 999.35 GB (697.1 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
MediaTek Inc MT1887
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Firewire Information: ?
LaCie d2 quadra (button) 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209.7 MB
Master Back-up (disk1s2) /Volumes/Master Back-up: 999.86 GB (640.35 GB free)
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.aliph.driver.jstub (1.1.2 - SDK 10.7) Support
[loaded] com.eltima.SyncMate.kext (0.2.5b15) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] rapiback.plist Support
Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
[running] syncmateStarter.plist Support
User Launch Agents: ?
[failed] com.google.GoogleContactSyncAgent.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
Silverlight: Version: 4.0.51204.0 Support
iPhotoPhotocast: Version: 7.0
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
Java Support
MenuMeters Support
Time Machine: ?
Skip System Files: YES - System files not being backed up
Auto backup: YES
Volumes being backed up:
Thomas iMac: Disk size: 930.71 GB Disk used: 281.49 GB
Destinations:
Master Back-up [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 154
Oldest backup: 2011-11-26 04:54:07 +0000
Last backup: 2014-08-19 00:06:13 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 281.49 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      2% WindowServer
      0% sysmond
      0% SophosWebIntelligence
      0% InterCheck
      0% com.apple.WebKit.Networking
Top Processes by Memory: ?
156 MB SophosScanD
143 MB InterCheck
135 MB softwareupdated
98 MB mds_stores
98 MB com.apple.WebKit.WebContent
Virtual Memory Information: ?
89 MB Free RAM
1.61 GB Active RAM
1.44 GB Inactive RAM
516 MB Wired RAM
2.92 GB Page-ins
446 MB Page-outs

I have problem with Bluetooth on my Qosmio G20

Hi
I have problem with Bluetooth.
I cannot use it because it is always off.
(Why Bluetooth Settings reports "Bluetooth is not Ready.")
I gone to Pro.Center in our area and he side (you delete your .. Definition of the Bluetooth!
But how!!!
whatever
How I get a new Definition of the Bluetooth?
Is that possible?
Please help me ... and learn me about all the Bluetooth things...
My pc is (TOSHIBA Qosmio G20)
I am waiting...

You should have a look at:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

How to connect my cannon mx470 series printer with bluetooth to my mini mac?

how to connect my cannon mx470 series printer with Bluetooth to my mini mac

Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

My ipad is locked up with the screen showing the usb port connecting to itunes. I had not synched by ipad to my computer in a long time so yesterday it was downloading software upgrades for 5 hours. then the screen was locked up.

My ipad is locked up with the screen showing a picture of the usb port with an arrow to itunes.

Then connect your iPad to your computer and use iTunes to restore.

I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with 68%.

I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.

Morning Clementine Lin,
For more information this, please see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
Have a nice day,
Mario

HT201412 did a software update and now the only thing I get is the itunes logo and arrow pointing up and a lock symbol with a line going down toward the screen button. Any suggestions to get this to open?

Trying to get the ipad to open after doing a software update. I only get the itunes logo with an arrow pointing toward it and a lock symbol with a line going down towards the screen button. Any suggestions to get this to open?

You are in Recovery Mode. Follow the instructions below to recover your iPad.
http://support.apple.com/kb/ht4097

Why can't i use the radio on my nano 7g with bluetooth

why can't i use the radio on my nano 7g with bluetooth. i wanted to use wireless feature at work but i only use the radio at work , so i bought bluetooth stereo headphones by plantronics, got the backbeat 903, at wal-mart . got home got it all set up and works fine but not for radio , i'm so dissaponted and am thinking i might take them back and continue using the wire ware , but then again i like listening to my podcast while doing dishes and chores at home so the bluetooth would be better for that .

i have sent a feedback form to apple about this problem . i hope that they work on a sulotion for it .

We have a corporate iPad in our auto showroom to show guests how to use features on their vehicles. Someone locked it with their account. It was not an employee. How can I get in? I did a restore of the software already?

We have a corporate iPad in our auto showroom to show guests how to use features on their vehicles. Someone locked it with their account. It was not an employee. How can I get in? I did a restore of the software already?

Gather up the proof that the dealership is the original purchaser of the iPad,
and take the iPad & that proof to a physical Apple store for possible assistance.
It is highly suggested that you make a genius bar appointment to avoid delay
at the store:
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
If no Apple store close by, get the information mentioned above and contact
Apple Contact Us for assistance.
Once the problem is resolved, you may wish it use Guided Access to limit
what customers can do with the iPad.
iOS: About Guided Access - Apple Support

I am able to see my ipod touch 5th geneneratio in find my iphone on icloud but it is showing offline.... i think its stolen but i have locked it with a passcode and the person who i suspect doesnt know it... i wana get it back what should i do??

i am able to see my ipod touch 5th geneneration in find my iphone on icloud but it is showing offline.... i think its stolen but i have locked it with a passcode and the person who i suspect doesnt know it... i wana get it back what should i do??

lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown/shown off, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?

This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.

IPhone6 won't pair with BlueTooth on MBPro

IPhone6, iOS 8.1.1 won't pair with BlueTooth on MBPro nor can I use it as Blue Tooth "hands free" device in my car. Blue Tooth is enabled on the phone and on the MBPro. I try to "connect to network" on the iPhone, using BT preferences on the MBPro, but get the message "can't connect" . On the MBPro, have gone to Sys. Pref., Network, can see the phone but again get the same message when I try to connect.
On the phone under the green button (which enables) the BlueTooth, I see the word "other devices" and a spinning beach ball as the phone tries to find additional devices but no joy.
Have Googled the problem, am reading similar issues - people seem to think it was the new iOS 8.0 and 8.1.1 was supposed to be a fix but it isn't. Any thoughts out there would be much appreciated.

Great - finally got our iPhones6 "discoverable" on our car. Whew!!! Thank you so much.
But, still can't pair our iPHone with my MBPro. Follwed directions on your link but no joy....<sigh>
The MBPro does NOT find the iPhone device. Don't know why......
However, the biggest problem is solved, hopefully.....that being the car/phone connection.
Appreciate the assistance.
thx

PC Suite stops working with Bluetooth after Laptop...

I use PC Suite and Bluetooth to connect to my Phone. I use the Synchronise, and the Messages feature a great deal. It all works great after a reboot, and I think it's a real credit to Nokia that they provide this free and improve their standing compared to other manufacturers.
However, the latest versions of PC Suite have taken a backward step in hardware compatibility. Previously, no matter what state my laptop was in - ie rebooted, returned from hibernate or standby, the laptop would connect to my phone over Bluetooth, and synchronizing would happen. When my phone went out of range, the connection would drop, and when it came back into range, the connection would re-establish and synchronizing would start again - wonderful!
Now, this only works after clean reboot, and after I have manually clicked on "Get Connected". After my laptop returns from standby, if I try "Get Connected" I get the error:
"Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia)"
To get PC Suite working with Bluetooth after returning from standby I run a Repair, after which it works beautifully.
Is this a known fault? I have uninstalled and re-installed PC Suite and the BT Stack as recommended in other posts to solve other issues. My configuration is:
Operating system: Microsoft Windows XP
Nokia PC Suite: Version 6.82.22.0
Bluetooth Stack for Windows by Toshiba v4.00.23(D) SP2
Bluetooth Specification: Version 2.0, 1.2, 1.1
Many thanks...

Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
In my experience, once things stop to work, I've had to strip out any subsequent installs.
My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
Thanks again Miksu

5700 locking up with bluetooth

Similar Messages

Maybe you are looking for