5700 TV-OUT problem with colours

Hi!!! I'm trying to fix the problem with my vga, but I could not get it fixed... The problem is that sice yesterday the colours in TV-Out mode is wrong, it appears that is on iverse colours, but I cannot change it. I had already reinstaled the nVidia 56.72 driver, reinstaled Windows XP SP1, and didn't work. Earlier today, I tried to connect the composite video cable and get the right colours, but just before I connected the S-Video again to check if the colours was right as composite, but for my sadness, it wasn't. Then I reconnected the composite and the colours was worg that out too, now the two TV-Outs, composite and S-Video are with the wrog colours... I don't know what else to do... help me!!!
Thank you anyway.

Hi,
Try changing the TV standard. Brazil uses a less common PAL-M standard, which uses NTSC line and field rates (525 lines,60 fields/sec) and a unique colour subcarrier frequency, which is close to the standard NTSC frequency. For more details on TV standards, look here.
You might have to experiment to find the combination which works best with your TV set.
Cheers

Similar Messages

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Error out problems with measuring frequency VI

I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
Attachments:
Measure Frequency VI error.vi ‏27 KB

This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
Hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

I have problems with colours of the pictures in Aperture:

I have problems with colours of the pictures in Aperture: they becomes pink and green totally "flashy"
I made all of the base reset's but it's already destroy>.
Please, could you help me ?
Thank's,
Philippe

Solution
Delete or restore from Time Machine
/System/Library/CoreServices/RawCamera.bundle
/System/Library/CoreServices/RawCameraSupport.bundle
Download
http://support.apple.com/kb/DL1666
Reinstall 4.07. Finished.

Gradient Problems with colours

Hi I am new to Illustrator (just bought CS5) and I am having trouble with the colours when using gradients (colours are generally duller as well) but when I make a gradient from red to black the computer automatically puts a grey inbetween, (photoshop has no problems the colours are clear and bright) I recently did a tutorial http://veerle.duoh.com/design/article/illustrator_inset_effect_on_text_in_combination_with _clipping_mask (she had the same tutorial in photoshop, which worked great) but my colours in illustrator are having this grey issue and the image came out looking very dull.
Is there some file setting I may have changed to cause this?
Thank you

The color setup in AI is trying to simulate the way CMYK actually looks in print. Sometimes the simulated display goes overboard, and it's impractical to write you a textbook on the whole color management (color calibration) subject in a user forum. (Plus, replies in a user forum are as often wrong as right.) There is plenty of reading material out there for you on this. (Start with the Help files, as the Color Settings dialog suggests.)
When designing for CMYK print, work in a CMYK document. Switching color modes is bad practice, especially if you intend for your on-press values to actually be the values you specify in the document. For example:
1. Set up your red (100M, 100Y) to black (100K) grad.
2. Change Document Color Mode to RGB.
3. Change Document Color Mode to CMYK.
4. Look at what has happened to your original CMYK values.
The best way to work in CMYK is to have a basic understanding of CMYK and the real-world principles of process printing. For example, if you do as Jacob suggests, and make the black end of your grad also contain the "red" (100M, 100Y), you will have a 300% total ink coverage at that end of your grad. That may or may not be a problem, depending on the target printing environment.
Generally speaking, yes; CMYK print is almost always "dull" compared to viewing RGB on a monitor (and you are always viewing RGB on a monitor, even if it is shifted to simulate CMYK). This is true regardless of color calibration. Common sense goes a long way. Monitors glow; paper doesn't.
One of the most overlooked facts is that human vision is highly adaptive. Even in RGB, your monitor never displays anything even approaching a true black. Yet your eye nonetheless sees a dark rich black.
CMYK process, for example, is very poor at reproducing brilliant blues. Yet the combination of knowledgeable image color correction (as opposed to mere calibration), quality printing, and the adaptive nature of human vision can nonetheless result in printed blues that seem to "glow."
If you're designing for commercial print, you should seek to understand the process enough that you would be comfortable assigning colors while working on a grayscale monitor. Again, that comes from both study and real-world exposure. Actually visit the press room whenever you have the opportunity. Maybe even take a course in commercial repro at the local tech school. You can't really gain the understanding you need in a software user forum. This is a huge subject.
JET

Can't figure out problem with new PC

Hi all, I just built my first PC and everything's running pretty well with the exception of some lag and freezing. My mouse and keyboard sometimes lag behind my true movement. The mouse does this more often and will lag behind for a second before it catches up to my true movement. Also, the system has occasionally frozen with the image still on the screen (no blue screens). Finally, when trying to play music, the audio will skip out every 10 or 12 seconds. Otherwise, the system is working fine... I've been burning DVDs with it and programs run fine on it.
I'm thinking that it has something to do with the RAM. Here is what I've done so far: I have all the newest drivers from MSI and Sapphire. I've tried running the system with each of the 512MB modules by themselves. I've also tried putting them in different DIMM slots. Any features in the BIOS that may slow the system have been disabled. The system runs right around 37C for CPU and 42C for the system, so overheating is not an issue. The RAM isn't getting too hot because the system is slow right from a cold boot. I've done memtest and it has showed the RAM to be good. I also ran CPU-Z and the memory specs are below. Does anyone have suggestions as to the cause of these problems and how to fix them? Thanks in advance for the help!
CPU-Z memory specs:
CPU-Z version 1.22
Memory Modules Serial Presence Detect (SPD)
Module #1
General
Memory type      DDR-SDRAM
Manufacturer (ID)   Kingston (7F98000000000000)
Size         512 MBytes
Max bandwidth      PC3200 (200 MHz)
Part number      K
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Registered      no
Buffered      no
Timings table
Frequency (MHz)      133   166   200
CAS#         2.0   2.5   3.0
RAS# to CAS# delay   2   3   3
RAS# Precharge      2   3   3
TRAS#         6   7   8
Module #2
General
Memory type      DDR-SDRAM
Manufacturer (ID)   Infineon (C1494E46494E454F)
Size         512 MBytes
Max bandwidth      PC3200 (200 MHz)
Part number      64D64320GU5B
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Registered      no
Buffered      no
Timings table
Frequency (MHz)      133   166   200
CAS#         2.0   2.5   3.0
RAS# to CAS# delay   2   3   3
RAS# Precharge      2   3   3
TRAS#         6   7   8

I now have all my programs loaded back on and all the drivers loaded and still have no problems with lagging or audio skipping. I did not install any of the Promise drivers this time. All I installed was the via driver necessary for installing windows xp at the "F6" menu. I also did not install all of the MSI utilities, etc. this time. SO all I can think of is that the problem lied in the promise drivers or some of the MSI utilities. The PS is running all of my drives fine as of right now. Regardless, I'm up and running good, so I'm happy. I hope this helps someone else.
Also... has anyone had problems with the Realtek ethernet adapter? My comp. gives me a "network location no longer available" error every time I try to copy files over the network from my other computer. I haven't seen anyone else with this error or found how to fix it. I have file sharing enabled, the windows firewall is not on, TCP/IP is installed along with client for Microsoft networks. They're all in the same workgroup also. I can connect to the Internet and the connection seems to be set up properly. I think that covers everything I've checked...

59000XT 128-VTD TV-Out problem with video.

I have the MSI GeForce 5900XT-VTD128. I´m using the TV-Out funktion and I clone my primary desktop. It all works fine to show the desktop on my TV. But when I try to play a Quicktime Movie in Quicktime it dosen´t work. It is the same problem with Windows media player.
I get a good picture on my primary screen but I get a "black" picture on my TV.
Ex. if I run windows Media player and starts an MPEG and I run Windows media player not maximized. On my primary screen I can se the Video beeing playd. But on my TV I only see Windows media player but I don´t see the move bieng played. It is just black. The same thing hapens in Quicktime. I Can't see video on my TV.
what could be my problem?
I´m using the latest drivers, (Have tested with Nvidias latest to but i´m now back to MSI 61.77)

Thanx.
That worket for me!
/Best regards
Sven Hagström

IPod Touch 2nd Gen Video Out Problem with Apple Component Cable

I'm trying to get video out working with my iPod touch connected to my TV. Here's the information.
32 GB iPod Touch 2nd Gen
Apple Universal Dock (current version.)
Apple Component Out cable for iPod (current version that connects with a dock connector.
I've connected the component cables into the component video input on my TV. When I start playing any video (purchased off iTunes store in Standard Def,) I get a scrambled picture that appears to be the video, and no sound. I purchased the TV in South Korea and haven't gotten to test it yet on a TV back in the US. I have my video out settings with wide screen turned off and set to NTSC (South Korea uses NTSC.) I've also tried every setting combination, and switching the cable connections with the same or similar results. Sorry if a similar problem has been posted elsewhere, but after searching, I couldn't find any similar behavior. Any ideas on what might be the cause? I don't have any other component devices to check if the component on the TV is bad.

I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

MacBook Pro display....problem with coloured pixels appearing

I wonder if anyone can help - I have recently noticed on the left hand side of my display on my MacBook Pro that there is a large number of coloured pixels appearing more and more by the day. I have had the MacBook since Christmas, and it has been treated very well, i have never dropped it or damaged it in any way etc. At the moment the pixels aren't causing too much of a problem but i don't want it to get any worse. Has anyone had similar problems, and if so any suggestions?
Many thanks in advance

I haven't had any luck what so ever - only thing left for me to try is to completely wipe the system and re-install everything from scratch, if that doesn't work then i think i'll be contacting Apple..... which i should have done already to be honest, would have saved a lot of time and hassle! Only difference between mine and what your describing on your Mac is that the pixels are visible at all times on mine, no matter what apps i'm running etc, it is definately a problem with the screen.....i'll keep you updated with any developments

Video out problem with Dynex 32" 720p TV

Hi folks. I bought my new Dynex TV a few days before New Years. It's great, really sharp, and I've had no problems with it. However, I do have a DVD recorder so I can record my games. Tonight, I attempted to use the A/V output on my TV and connected them to my DVD recorder (which plugs into my computer). I clicked "capture" and got an error telling me that a connection could not be established and that I should double check my cables. I could hear the audio playing through my laptop speakers just fine. I couldn't see the video, for some reason .
It's not the cables, I just took them off of my old TV to use them here.
What can I do? Should I return my TV?

What about output from a gaming console, like a PS3? Is that only digital sources or does it matter how the PS3 is connected to the television to determine if's its a digital or analog signal? Right now I get no output when I try to send the video of my PS3 to my composite video in on my computer's TV tuner card.

Stereo Out Problem with Macbook Aluminium(Late 2008) Debian OS

Hello. I'm using my Macbook Aluminium(Late 2008) with 2 operation systems: Snow Leopard(10.6.8) & Debian Squeeze (6.0.4). I've no problem with OsX side, works fast & great. But I've got a interesting problem with Linux side. Everything works but Stereo Speaker. I realized that my macbook uses only one output(right speaker works, left doesn't), so I can't listen stereo music on Linux side. Debian uses ALSA Audio aoutomaticly. I've already asked Debian forums but noone able to solve my problem, so I decided to ask here with my last hope.
What I tried:
1- used ''speaker-test -c 2'' terminal code & I've seen this message
speaker-test 1.0.23
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
1 - Front Right
Time per period = 5.823448
2- Checked Debian's Audio Settings, everything seems normal.
3- Installed Pulse Audio, but it used Alsa base so nothing chanced. In Pulse Volume Control Panel, I saw I've got only Mono Output. But I there is no section for change to stereo.
4- Uninstalled ALSA & installed OSS4 but OSS4 simply doesn't work. So turned back to ALSA.
5- My stereo works only with headphone on Debian.

Hello. I'm using my Macbook Aluminium(Late 2008) with 2 operation systems: Snow Leopard(10.6.8) & Debian Squeeze (6.0.4). I've no problem with OsX side, works fast & great. But I've got a interesting problem with Linux side. Everything works but Stereo Speaker. I realized that my macbook uses only one output(right speaker works, left doesn't), so I can't listen stereo music on Linux side. Debian uses ALSA Audio aoutomaticly. I've already asked Debian forums but noone able to solve my problem, so I decided to ask here with my last hope.
What I tried:
1- used ''speaker-test -c 2'' terminal code & I've seen this message
speaker-test 1.0.23
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
1 - Front Right
Time per period = 5.823448
2- Checked Debian's Audio Settings, everything seems normal.
3- Installed Pulse Audio, but it used Alsa base so nothing chanced. In Pulse Volume Control Panel, I saw I've got only Mono Output. But I there is no section for change to stereo.
4- Uninstalled ALSA & installed OSS4 but OSS4 simply doesn't work. So turned back to ALSA.
5- My stereo works only with headphone on Debian.

TV-out problem with a Qosmio G20 - Scart option disappeared

I have a problem with my video board and its driver.
I have got a Qosmio G20 with a Nvidia GeForce Go 6600.
Yesterday when I boot my notebook i have seen that some setting were disappeared.
I have tried to connect the pc with the TV in the way described here: http://support.toshiba-tro.de/kb0/TSB4A00TK000MR01.htm
but the option scart in the tv format menu was disappeared and it was disappeared in bios setting too.
I have tried to reinstall the display driver but I haven't solved my problem.
Now i can't connect the pc with tv and this is a very big problem for me.
Please help me if you can.
thanks. (and sorry for my very bad english)

Hi
Maybe the scart cable malfunctions or is wrong?
Some cables have a wrong PIN assignment and therefore the TV connection not functions
In my opinion the cable should be checked
The other reason for the missing PAL scart option in the BIOS could be a wrong DMI setting. But this can be checked only by a ASP.
So try to contact the technician guys and talk to them about the problem of missing PAL scart option in BIOS.
bye

Drill Out Problem with drill down

Hello,
help needed.
I have two workbooks. The first consists of a hierachical Rowset. This workbook ist stored complettly collapsed.
When I open it in Portal and use the option "analyze" and after that follow a drillout link to the second workbook it works.
When I open it in Portal and use the option "analyze" open one level of the hierarchy and after that follow a drillout link to the second workbook the "save dialog" apears. If I answer yes I get an error and also if the answer is no.
I also set in the discoverer\configuration.xml the flag saveWorkBehavior="never_save" nothing (still asking).
Logging level is none
Discoverer 10.1.2.48.18 with patch 5729515
Can anybody can give me a solution, workaround or hint
Application.log
07/01/09 14:54:18 discoverer: [ERROR] [AJPRequestHandler-ApplicationServerThread-6] oracle.discoverer.applications.framework.ApplicationController._logException error.handling.event
oracle.discoverer.applications.framework.ApplicationException: error.handling.event
     at oracle.discoverer.applications.framework.GlobalExceptionHandler.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processException(RequestProcessor.java:553)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:486)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.discoverer.applications.framework.ApplicationEncodingFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
     at oracle.discoverer.applications.framework.RawRequest.populateParameters(Unknown Source)
     at oracle.discoverer.applications.framework.RawRequest.<init>(Unknown Source)
     at oracle.discoverer.applications.framework.RawRequest.initDeferredRequest(Unknown Source)
     at oracle.discoverer.applications.framework.RawRequest.<init>(Unknown Source)
     at oracle.discoverer.applications.framework.ApplicationController.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     ... 14 more

Hi user 552235...
I am not sure if my next post will help you, since I am not working with portal, but I had a problem with drill to link in the same disco version (10.1.2.48.18) and the problem solved after applying patch 5507746 for bug 5475467.
You can read more in metalink with the number I supplied you and try in a test environment of course...
Hope this will help you solving your problem, if it does please update the thread for the rest of our community...
Gidi Halamish

Problems with COLOUR when using "save as".

Running on Mac, get dulled out and purple colour tone when using "Save As". When using "Save for Web.." colours are OK. Colour profiles and images coming into Raw are set as sRGB. Can anyone help?? I do have to convert to 8 bit to save as JPG. Any help appreciated.

The Print version is what a ProPhoto file looks like when viewed as if it was sRGB - i.e. in a non-color managed application. So there's still a ProPhoto profile here.
Here you can see how the colors shift by going between sRGB and ProPhoto (using assign and/or convert). Your original is in the middle. You can see it's the very same color shift:
If you convert to sRGB and you still get the same outcome, which you shouldn't, maybe the preferences are corrupt. Or maybe user error and you still have ProPhoto embedded.

Problem with colours and tonalty in LR 1.1 conversions

Im having hard times trying to get great colour and tonalty out of LR conversions. Some times it seems that its just impossible to get there where I want with LR. No matter how much I tweak sliders in Calibration Tab or in Colour Adjustment Tab, subtle tones and colours are just impossible to get.
Example
Both pictures have been edited in converters only resizing and text has been inserted in photoshop. Picture taken with Konica Minolta 7D.
http://luotokuva.fi/noudettavat/Oranssi_2.jpg
1. Under cloud there is subtle colour gradient with DxO conversion that LR conversion lacks
2. Colour transitions in DxO versions have much more life. There is just one tone on lake in LR vesion.
3. Suns reflection in LR conversion clips and is ugly. Again DxO verson has far more natural tonalty.
For those who believe they can do better job with LR conversion here is the raw file for them to play.
http://www.luotokuva.fi/noudettavat/PICT0906.zip
I hope LR conversions would be better because programs usability is far better than DxOs.
-Sampsa Kaijaluoto - Finland

The problem is not in the tone, but in the lack in the number of tones. I can change the colors, but i can't get the colors to slide in a perfect gradient. Look these images:
This is how the area around the sun should look (Canon DPP)
http://jkphoto.pp.fi/upload/sun_dpp.jpg
And this is how Lr converts it with defaults:
http://jkphoto.pp.fi/upload/sun_acr.jpg
In past i have done accurate profiles for my cameras to ACR with the color checker and calibration script and calibration has no effect on how the tones just clip off.

5700 TV-OUT problem with colours

Similar Messages

Maybe you are looking for