5800 after software update. Phone black screen and...

I use nokia Ovi software to update my 5800 after update when i turn on my phone it keep vibrating none stop, the screen is black. When i call your customer care they advice me to call the local care centre and they are charging me $50 for the checking and repairing. My question is why am i paying for the repair when i am using the updates provided by Nokia that corrupted my phone.

Try a Hard Reset..
/t5/Nseries-and-S60-Smartphones/How-to-Soft-Hard-reset-5800-E71-N95-and-N97/m-p/787573#M232577
Be warned that Hard Reset will erase data from the phone.. so If you have not kept a back-up you will have to start afresh..
--------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

  • Blackberry Z10 won't turn on after software update. Black screen and LED light blinking

    Im using BB Z10 (stl-100-1 ) os version 10.3.1 for 9 months, recent days it hangs a lot and  it hanged later  not turning on and red led has been blinking simultanously. please help me

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs. If it fails, please do it again but increase the step 4 wait time to 2 hours, and perhaps as long as 4-5 hours.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Software updates causes black screen on macbook

    The laptop is an Apple Unibody MacBook Intel Core 2 Duo, processor - 2.4 GHz Intel Core 2 Duo. Memory - 2 GB 1067 MHz DDR3. OSX 10.9.1 Maverick.
    The Macbook prompts software updates in which the macbook is supposed to restart after the software installs. I’ve received this ‘Install software’ prompt twice since I’ve had this macbook, purchased 12/16/13 delivered 12/20/13.
    After each software update the macbook doesn’t restart, there’s just a black screen, but the power light is on. I’ve had to zap the pram in order to get the computer to work. The latest incident happened after the macbook prompted a Firmware update. The Firmware software installed (I thought) then there was an odd, high-pitched squeak sound and the screen went black, same as the last time. I once again tried zapping the pram, but this time I had to try it 3 times before the computer came back on.
    When I check the software updates, under the title “Updates Installed in the Last 30 Days” it indicates that the Firmware did actually install on the date of the last black screen incident (Dec. 30th), BUT above the titled window “Updates installed in the Last 30 Days” is another window titled “1 Update Available” and that window contains the 2 firmwares that supposedly installed on Dec. 30th - SMC Firmware and EFI firmware. If these 2 firmwares supposedly installed on Dec.30th, why does it show that they are still available for download. I have to assume that they didn’t actually install, and that I going to have to hit the ‘update’ button to install them, but I just know that I’m going to get that black screen again. Does anyone have an answer to this problem.
    I should also add that I've only used this macbook with the power cord, but the battery is losing power, it's now at 96%, from 99% when I first got the macbook.

    Lion has been causing a lot of problems on older hardware, it killed a 4 year old 15" MBP on me.
    Go back to 10.6, the stability of your business comes first.

  • After Software Update, USB Power Issues and Cursor Freezing

    I have a 1.8 dual g5. After the latest software update I experienced some seriously quirky usb power fluctuations, a card reader frying and sudden, but temporary, mouse cursor freezing. I did some research and went for a clean install from original Leopard disc and downloaded the combo update 10.5.2 from apple support. I then restarted in "safe mode" and ran the 10.5.2 update, restarted, zapped the pram, restarted to disc warrior to repair permissions and clean the drive... then restarted again. Same deal: Spinning lines on gray 1-2 minute. black (sometimes white) screen 3-5 minutes. blue screen 1-2 minutes. log in.
    Tried cocktail, disc utility permission repair and removing log-in applications/drivers. Same deal... ****** computing. I feel like it's 1999 all over again.
    Cost me three full days work so far under a very tight deadline and a lot of stress..... Apple is 100% responsible for this messy release and needs to address it quickly.

    My problem is similar to the others already posted, but quite different too. Perhaps someone else has had this strange issue occur. I attach my nike+ receiver and set my workout as usual, and then I come to selecting playlists. I select my playlist (which is titled running) and my work out starts. HOWEVER, the playlist that I selected plays music from another playlist such as sarah mclachlan (which is not in my running playlist). I have tried everything that you guys already posted short of doing a restore. Any thoughts? I posted this same question on the nikeplus.com web forum but no one has replied. I can find no sequence to the playlist malfunction. For example say I choose to play my sarah mclachlan playlist it will play my irish playlist instead and so forth. Make sense? HELP!!!!!

  • Software update Causes Black Screen

    Hello,
    I just did a software update for my macbook pro and not only do I now have a black screen, the macbook pro does not show up in my wireless network so even though the apple chime sounded, I don't even know if the macbook pro is even online or up and running.
    My Apple Care ran out in April and if I have to I'll bring it to the Genius bar but I don't have a car and getting there is hard so if it's something simple that other people have dealt with maybe someone can help me from the community? I really really hope I don't have to buy a new macbook pro and if it turns out that the update ruined my laptop I will be enraged,
    Thank you for any help anyone can give me.

    Hello,
    If you just ran the 2011-005 security update AND you frequently use Time Capsule for backups, I would recommend restoring to a point in time PRIOR to applying the security update.  It has caused many issues [freezing the system, blue flickering screen, not getting to login screen, spinning beachball, grey screen with dim apple logo with spinning indicator, not allowing login, slowing down the system, etc.] for me and others in the support community. 
    The my Macbook Pro has been at the Genius bar for three days.  They won't acknowledge that an update from Apple could cause the issues, but after looking at recent entries for "2011-005" or "can't login" you can see that there are problems. 
    Currently, my laptop has been supposedly having the OS completely reinstalled.  This should have taken a few hours but it is going on day 3 at the Apple store.
    So, short story is to go back in time, if possible for you [Time Capsule option]
    Hope this helps

  • Problems after software updates - iTunes, Sound, Clock and General

    After applying the update to iTunes (7.6.2), it has almost exclusively crashed straight after start up, or after a few seconds of playback. Twice it's worked for a short period, but then crashed when I plugged my iPod in.
    I get this in the Problem Report:
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000008
    Ire-installed it to no avail.
    A couple of days later I carried out most of the other updates, and ever since things are running slow. Everything down to the trackpad movement is sluggish, even choosing a user and entering my password falters and stalls. Sound seems to skip and struggles to be played if at all, and absurdly my clock is losing time, at a rate of about 50 minutes every hour.
    Taking the battery out and holding down the power button temporarily(about 10 minutes) resolved the sluggishness, after which point it slowed back down.
    These are all the software updates carried out over the last week:
    +iTunes 7.6.2+
    +Macbook EFI Firmware 1.1+
    +iMovie 7.1.+
    +Keynote 4.0.2+
    +Number 1.0.2+
    +iWeb 2.0.3+
    +iPhoto 7.1.2+
    +Keyboard Firmware 1.0+
    +AirPort Utility 5.3.1+
    +Front Row 2.1.3+
    +Digital Camera RAW Compatibility+
    +iPhoto 7.1.3+
    +Leopard Graphics 1.0+
    +Time Machine and AirPort 1.0+
    +Keynote 4.0.3+
    +Security 2008-002 1.1+
    +Safari 3.1+
    I'd be very grateful for any help or pointers as to what may have cause the problems, and how I might go about rectifying them.
    Message was edited by: statusfrustration

    i have the same problem. my battery drains after an NSU update of my nokia 5800 to v50. do i need to reupdate?

  • IMac, update causing black screen and randomly powers off...?

    I've seen many comment on this with few solutions.  It had never occurred until yesterday afternoon after the latest security update for Mavericks, 2014-005 v.1, was loaded and the system was rebooted.  After that moment the mac has been unusable.  It will start and after user log on, will black screen, sometimes still running and other times instantly powered off.  I have followed resetting the PRAM, and SMC procedures with no change and have booted into safe mode in order to examine the system and it is just as unstable there.  The times I have gotten it booted and running, attempting to access an earlier Time Machine backup, but before I can start reload it goes black.  The same goes while trying to check the sleep mode and security settings.  Unless this is an amazing coincidence, I believe the latest update has caused this problem and has for others as I have seen on many conversations.  Can this be uninstalled or does the drive need to get wiped and then reload from the Time Machine?
    Thanks.
    iMac,  A1311  21.5"  Mavericks 10.9.5  Update 2014-005 v.1

    Well, initial call into Apple Care and one answer.  "We have no idea what it is, we can get you an appointment at a Genius Bar in 4 days!"  4 days?!  Seriously?  At least they were kind enough to only put me on hold for 30 minutes, AND then transferred me to a "Sr. Care Specialist" who basically blew smoke up my arse only to tell me the same thing... why transfer me at all?

  • Trying to install software update, phone stopped responding and gives error code 9

    While trying to update software on my iPhone 4, it stopped during installation and gave error code 9, now it says the phone must be restored but will not complete the installation and still gives error code 9, very frustrating.  I tried on 3 different computers, same results.

    reset preferences -
    after effects:  http://helpx.adobe.com/after-effects/using/preferences.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    illustrator:  http://helpx.adobe.com/illustrator/using/setting-preferences.html
    indesign:  https://forums.adobe.com/thread/526990
    photoshop:  https://forums.adobe.com/thread/375776
    if that fails to solve the problem, restart in safe mode and test.  if ae works, you have a conflicting non-essential program.  you can use your activity monitor to find it.
    if restarting in safe mode fails, uninstall, clean (Do a clean install) and reinstall ae.

  • Macbook wont turn on After software update

    PPlease help!
    my macbook air 11 wont turn on After software update. The screen completely black . Power button is not responding éven if it is fully charged.
    THank you
    NOra

    Have t you tried a SMC reset?
    http://support.apple.com/kb/HT3964
    It may be helpful if you indicated the EXACT MBA model you have and the OSX.
    Ciao.

  • I tried to update my ipad software whilst connected to my computer. There was an error and now my ipad is frozen with a black screen and a white apple. it will not even power up. Help

    I connected my ipad to my laptop in the hopes of dowloading some photos i needed. It invited me to back up my data and update to ios 7.0.6. After 2 hours to download the software it then tried to install it and encountered an error. The ipad is now frozen to a black screen and the apple symbol. i cannot even power it off. What on earth can I do?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also, do you remember what the error message said?

  • Crash during software update = black screen and no way to Restart

    Had to rebuild my hard drive and system from original Leopard install CD.
    Subsequently, initiated internet Software Update which transferred OK.
    After Software Update restarted to finish installation the process locked up at "54% complete". Restarting to break out of frozen state, (what else might I have done?!) machine begins to come up but screen goes black then text/code at top of screen scrolling down to a message that I need to Restart but such is repeatedly unsuccessful + no way to open CD drive to perhaps begin again from scratch.
    Machine is in a partially updated and therefor scrambled state. Suggestions anyone??

    You can open the drive by restarting while holding down your mouse button, wired mouse only.
    Perhaps you had the following?
    You may be experiencing a Kernel Panic as seen and described in Apple doc. HT1392. If not, disregard.
    Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
    Here is a great MacFixIt article.
     Luck! DALE

  • TS3274 My Ipad has a black background now and everything is color faded after the latest software update?  I restored and reset the Ipad.  How can this be fixed?

    My Ipad has a black background now and everything is color faded after the latest software update?  I restored and reset the Ipad.  How can this be fixed?

    How much data is being backed-up from each Mac?  (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
    Is there any other data on your Time Capsule, besides the backups?
    Most likely, there just isn't room.  Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't.  Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
    Also see #C4 in Time Machine - Troubleshooting for more details.

  • My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

    my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

    Does the Ipod see the network?
    It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the  antenna. See:
    http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

  • HT4623 Hi,This morning I had software updated my iPhone 4s  and then I couldn't open again.One the iphone screen,it appears me to ask plug in iTunes and which i did but can't restart my phone.Please help me

    Hi,This morning I had software updated my iPhone 4s  and then I couldn't open again.One the iphone screen,it appears me to ask plug in iTunes and which i did but can't restart my phone.Please help me

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge, after updating to ios 8.0.1

    My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
    This is happening only since I have updated to new ios version (ios 8.1).
    Is there anyone facing similar issue?? Any suggestion?!?

    Hi jayla_mora, 
    Thanks for visiting Apple Support Communities. 
    It sounds like your iPhone screen is going blank and not responding. 
    You may find the tips in this article useful for troubleshooting this behavior:
    iOS: Not responding or does not turn on - Apple Support
    Best Regards,
    Jeremy

Maybe you are looking for