5800 after update (V51.0.006) no Bluetooth

After installing the last Version(V51) on my Nokia 5800, I cant enable the bluetooth!
After input the code *#2820# the bluetooth MAC adress is empty!
Following I have tested, but nothing works:
- hard-reset
- soft-reset
- remove accu for a long time
- format Memorycard
Is it possible to make a "downgrade".
thanx for help.
Gerald

Hi, have you turned bluetooth on? After updating my n97 my macadress was empty untill I had turned bluetooth on for the first time.
Go to menu->settings->connectivity->bluetooth->bluetooth ON. Then try again.
You can not downgrade.

Similar Messages

Xpress Music 5800 new firmware (V51.0.006)problem

guy, i have this problem after updating my phone.
- my music player keep repeat song even i make repeat off
- hang when try to change radio station channel
those who have this problem and have the solve, hope can give me some advice. Thanks

/t5/Software-Updates/Nokia-5800-firmware-update-v51-0-006/td-p/738756

Keynote remote will not pair with ipad after update to 10.7.2-bluetooth issue or remote app issue?

Noticed keynote remote will not pair after updating. Bluetooth light flashes a couple of times then goes off. I'm wondering if it's a bluetooth issue or a keynote remote app issue.
Any suggestions or remedies?
thanks

Then again, it may not.
I've tried all the things recommended in the Apple KB article, and it doesn't work. Mulderscully is right, in the recent iOS 5 upgrade, Bluetooth is not turned on (at least, its symbol is not visible) from within Keynote even if you turned it on in the Settings menu. Posts in another thread recommended using another app to establish a Bluetooth connection between the iPad and iPod (I used Touch Rummy), then switching back to Keynote and Keynote Remote. This does work for me, but it is an awkward workaround. Shouldn't 'It just work'?

Tecra S1 : After update Win XP SP3, Installing Bluetooth driver hangs !

Hello,
after updating the Win XP Professional from SP2 up to SP3
the Bluetooth doesn't work anymore.
I tried to install the Bluetooth Drivers again.
During installation it hangs,
if have to abort the installation.
Nothing helps to get the installation correct finished.
Does someone had solved the problem ?
Thanks.
Patrick

Same here on my S4. When installing the driver it asks me to plug in my device...
The stack itself seems to be working, tough. Bluetooth ca now be activated in Config Free.
Also there are two unknown devices in my device manager. The location for both is Intel(R) 82801GBM (ICH7-M) LPC Interface Controller - 27B9.
And both show under Details->Function CM_DEVCAP_SILENTINSTALL

After update I no longer have bluetooth

After updating to 1.1.1 on the iphone, I no longer have bluetooth. When I try to turn on Bluetooth in the General panel, all I get is the spinning wheel forever. It was working this morning, but no longer. Any suggestions.

I had the exact same problem and turning the iPhone completely off and the on again cleared things up for me.
Good luck!

After Update on Mountain Lion my Bluetooth is not working

Hello,
after I updated my iMac from Snow Leopard nach Mountain Lion 10.8.2 my Bluetooth is not working. Also my Magic Mouse works not correct. The scroll function is not available. What can I do?

Leibe AndreSch...I have encountered the same problem with Mountain Lion 10.8.2
Especially after 'sleep' mode the bluetooth keyboard and mouse are lost and although I keep an old wired mouse
handy for such problems....I can't access the Bluetooth settings to sort things.....the spinning ball nonstop.
What I do is...Force shutdown by holding power button for two seconds...When shutdown PULL power cord out from rear of iMac....wait 5 seconds.. replace and switch iMac on again.
As long as bluetooths ar 'discoverable' it restores connection.
We will both look forward to another Apple iMac software update to sort this glitch....or I HOPE so

Nokia 5800 after update to v.21

Hello everyone.
I want to ask you the following:
I did update with the latest software on my nokia 5800 to v.21 and now hellp menu gives error and does not start, "shown my system error".
Any suggestions?
Maybe hard Reset ..... also want to ask you delete my information from the phone, mostly I'm interested in whether I stay or not the native language?
Thanks, best.

Does factory restoring delete all installed settings on the phone?
(Sorry for the late post, but just bought the phone and cannot access the alarm!)

5800 after update Wifi and language was lost

I just updated my 5800, but it`s seems like not so good, because my wifi is totally disappear, and my chinese input all gone.

@khenny
If language pack has been installed this can be lost when Nokia Software Updater delivers firmware dictated by seven digit product which on a pre-owned device may not correlate with that upon label under battery.
Whereas there are 5800XM destined for Chinese market without 3G and WLAN, was not aware that firmware update could make it disappear.
Happy to have helped forum with a Support Ratio = 42.5

TS3253 After Update to ios6 on ipad3, Bluetooth Sound is laggy and chunky at times, in any kind of media played in any kind of app... Whats Wrong?

The title says it all...! Now to fix?

Try this first and see if it works.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

5800 after software update. Phone black screen and...

I use nokia Ovi software to update my 5800 after update when i turn on my phone it keep vibrating none stop, the screen is black. When i call your customer care they advice me to call the local care centre and they are charging me $50 for the checking and repairing. My question is why am i paying for the repair when i am using the updates provided by Nokia that corrupted my phone.

Try a Hard Reset..
/t5/Nseries-and-S60-Smartphones/How-to-Soft-Hard-reset-5800-E71-N95-and-N97/m-p/787573#M232577
Be warned that Hard Reset will erase data from the phone.. so If you have not kept a back-up you will have to start afresh..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Nokia 5800 V51.0.006 Upgrade

I had upgraded my Nokia 5800 XM software three weeks back to V51.0.006. While upgrading I had kept the 8 GB Micro SD Card out of the phone. Now my battery back up has reduced considerably since the upgrade. Please suggest if you any resolution for this.

pravnis wrote:
I had upgraded my Nokia 5800 XM software three weeks back to V51.0.006. While upgrading I had kept the 8 GB Micro SD Card out of the phone. Now my battery back up has reduced considerably since the upgrade. Please suggest if you any resolution for this.
OVI suite recommends to keep your memory card while updating your phone, but however it is done without failing. Means nothing wrong with installing update. try hard resetting your phone.
First turn off your phone, then follow these steps
Press and hold Green key (call key) + Red key (end key) + Camera key while turn on your phone. Release those key when phone ask for your country.
P.S. Hard reset will erase phone memory backup your important data first.
DON'T BACKUP SETTING, SETTINGS MAY CONTAIN ERRORS.
Glad to help

Radio 5800 not working after updated

Hello,
I have updated my Nokia 5800 with the 51.0.006 and the radio is not working anymore.
Any suggestion?
Solved!
Go to Solution.

After doing what was suggested by Nokia: switch off, remove the battery and switch on again it works.

5800 - after today's update the big on screen qwer...

hi,
I just updated my 5800. then I wanted to send someone a text message, but I wasn't able anymore to use the big QWERTY-keyboard!
it's gone, and that's very annoying...
anyone...?

Hi,
I just updated my 5800XM and I don't have this problem (I posted the problems that I have) . Regarding your problem maybe try to set the QWERTY keyboard in message settings. My device now (after updated to V40) changes the keyboard automatically to full QWERTY in landscape mode.
Hope you will find the solution!
Regards!

After updating my macbook pro (OS X Mavericks 10.9.3) it doesn't support a connection by bluetooth with my iPhone 4S. Why?

After updating my macbook pro (OS X Mavericks 10.9.3) it doesn't support a connection by bluetooth with my iPhone 4S. Why?

Hello Sergio V. Marciano,
The articles linked below provide some useful information and troubleshooting steps that can help restore Bluetooth connectivity between your Mac and your iPhone.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Archived - Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
Cheers,
Allen

After updating OS X 10.8.5, bluetooth is not available in the menu bar. The Magic Mouse is recognized and working but the bluetooth mouse functions do not work.

After updating OS X 10.8.5, bluetooth is not available in the menu bar.
The Magic Mouse is recognized and working but the bluetooth mouse functions do not work.
I have downloaded and installed 10.8.5 combo but it does not help.
Menu bar - System Preferences/ there is no bluetooth item
I restarted with cmd + alt + P + R it doesn't help.

Did you try the suggestions from your other post on this?

5800 after update (V51.0.006) no Bluetooth

Similar Messages

Maybe you are looking for