5800 and quicktime or Word 2003 viewer

Does anyone know if it's still possible to install a (ideally free) Word doc viewer on the 5800? Looking through the forums there seems to be something called quicktime, but only a full paid-for read/write version.  Earlier on this year one could apparently download it via the 'Download!' folder on the 5800, but now there's only the Ovi store there, and the Ovi store seems pretty useless.
Any ideas?  I don't need to write docs, but it would be v useful to read them.
Kate

The free read-only version is not generally available. Some Nokia phones have it installed in the firmware at factory-level, for some reason this was not included in the 5800. Check if you can get it using the Download! application in your phone, otherwise you might have to bite the bullet abd buy the full version.
If you go down that road, keep an eye on the quickoffice.com web site, they often have special offers with reduced prices.

Similar Messages

  • Help file fails to generate RoboHelp 7 and Word 2003

    Hello, I am back again with a new struggle.  I am creating a WinHelp4 file for an older application using Word 2003 and Robohelp 7.  There are several different results regardless of whether I make updates, corrections, add jumps, change Topic IDs or do nothing when I click on generate:
    1.  sometimes it generates and works perfectly, just not very often, usually between 8 and 805am ET.
    2.  sometime it will generate an error:  Failed to compile
    3.  another error:  filename.rtf does not exist, but it is there in the folder
    4. generates a Warning, but I don't know what the warning is as it does not show it
    5. generates a blank Help with only a single glossary definition
    6. not enough memory ( 1 gb is available)
    7. corrupted file, rerun and it works...sometimes
    I have:
    1. Started over
    2. Rebooted
    3. Uninstalled and reinstalled RoboHelp 7 and all updates
    4. Tried adding one item (jump, new topic, changed topic, updates to TOC, renamed anything) at a time and then generated file
    5. Create an html from Word...I know silly but it worked some of the time.
    I feel like there must be a setting error I missing or something hidden that I need to remove.  There is something or a very big bug! I can't find anything and RoboHelp 7, Word 2003 and creating Winhelp4 files have been fine the last 2 months...now...not so fine.
    Please help!  I am so close to finished!
    Thanks,
    and if this isn't enough, I cannot generate a print to PDF either, but used to!

    I wish I could try on a different PC.  This is a government facility and that is not an option.  There are only 2 of us who have RH and I think the other person may have left last week...what luck!
    As far as anything else running, that is possible....I may try disconnecting the network and see if it will work...that should check it, right?
    Background resources are very probable as their are virus scanners and who knows what else...my rights are very limited, no Admin rights to the machine.
    It just amazes me that it has worked and now at the very final stage and updates it will not.  I am in early when it usually works, 745a ET and it failed.  These are the error messages and I usually get this type:
    Warning - HC4004: datcap.rtf is not an RTF (Rich Text Format) file.
    Warning - HC4009: The Topic ID "Data_Capture_Operations" specified in the Project files as the Default Topic does not exist.
    What is odd, is they are both there and have worked consistently up until this recent failure....cannot complile.
    I know this is long, but here is the notpad error:
    Starting compilation...
    WinHelp preprocessor 7.01.002
    Compiling C:\Documents and Settings\jkmalone1\My Documents\My RoboHelp Projects\CRS On Line Help Individual\DATCAP\!SSL!\WinHelp_4\DATCAP.hlp ...
    Preparing to create WinHelp...
    Clearing output folder...
    Filtering out conditional text...
    Processing DATCAP.rtf...
    Processing DATCAP.rtf...
    Removing watermarks...
    Processing DATCAP.rtf...
    Collecting Topics' Information...
    Processing DATCAP.rtf...
    Removing broken jumps...
    Finished preparing in 4 sec(s)
    Generating WinHelp system...Microsoft (R) Help Compiler
    HCRTF 4.03.0002
    Copyright (c) Microsoft Corp 1990 - 1995. All rights reserved.
    Datcap.hpj
        HC4004: Warning:
    datcap.rtf is not an RTF (Rich Text Format) file.
        HC4009: Warning:
    The Topic ID "Data_Capture_Operations" specified in the Project files as the Default Topic does not exist.
    3 Topics
    0 Jumps
    0 Keywords
    0 Bitmaps
    Created C:\DOCUME~1\jkmalone1\Local Settings\Temp\RHTemp12\Datcap.hlp, 13,205 bytes
    Compile time: 0 minutes, 0 seconds
    0 notes, 2 warnings
    Finished compiling WinHelp in 6 sec(s)
    Compilation complete.
    WinHelp (WinHelp 4) was built successfully:
    C:\Documents and Settings\jkmalone1\My Documents\My RoboHelp Proj
    There has to  be something causing this...it ran quickly this am but failed with the above Warning errors.  The file is not successful although it built a sort of Help...one definition of one word....and nothing else.
    Suggestions:
    Thank you for taking an interest...this has me so puzzled.

  • Can't convert Word 2003 file to PDF

    Downloaded the trial version of Adobe XI (Win7) and am using Word 2003. Tried to create a PDF from the Print menu (didn't work); the built-in menu in Word (didn't work). All I get is a 'PDF' file on my desktop (not saved as the name I initially gave the file) and, when opened, it's just a message stating the PDF file couldn't be created due to incombatibility w/Word.
    HELP!

    1) First i install Ms Office after then i install Acrobat 9.0 and update 9.2.0
    2) that time also Word to pdf Conversion display same error
    3) and 3 times i reinstall acrobat but not change .
    4) this error my System only show, but same config for other system is not show
    how can i solve, plz help me.
    by,
    Seenu

  • Importing tables from Word 2003 into Robohelp for word ^

    Does anyone know how to import tables and boxex from Word
    2003 nicely into Robohelp 6

    You can capture the table from your original word.doc and
    save the image as either a bmp or gif file. In robohelp, insert the
    picture where you want it to be located at. Have the table act as
    an image.

  • RH7 Word 2003 vs. 2007

    Hi folks,
    I'm using RH7 (and TCS) and have both Word 2003 and 2007
    installed. When generating a Word doc, Word 2007 opens by default.
    Does anyone know if I can configure RoboHelp to use Word 2003
    instead?
    Thanks,
    Diana

    Hi Peter,
    Can you please jot down the link to your site so I can read Snippet 82? I'm having trouble with RH7 recognizing MS Word 2003. I only have the one version of Word, but when I attempt to generate a Printed Document, I receive an odd error message that RoboHelp cannot find MS Word.
    Thanks!!
    Tabby W.

  • I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

    I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
    The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

    I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
    The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

  • Page numbers display as 5 of 1 and 2 of 2121 in a PDF that was created from a Word 2003 document

    We merge several Word 2003 documents into 1 larger document that we then convert to PDF.  The page numbers in the Word document display properly - 1 of 21, 2 of 21, 3 of 21, etc.  We then convert that merged document to PDF by right-clicking the filename and choosing "Convert to Adobe PDF".  For those of us with Adobe Acrobat Standard 8.1.3, the page numbers in the converted PDF file display as 1 of 1, 2 of 1, ... 21 of 1.  Those with Acrobat Professional 8.1.3, they display as 1 of 21, 2 of 2121, 3 of 212121, etc., each page adding another total number of pages to the total.  There is no change in the result if using v8.0.0 or 8.1.4  Does anyone have any ideas???

    Unless you have a specific reason to upgrade to OFFICE 2007, I would not recommend it. I hate it -- have it on two computers. I have had problems creating PDFs reliably from WORD 2007 and PPT 2007, at least with graphics. The conversion seems to want to split graphics up into several parts rather than leave it as one. It does not happen with WORD 2003 and so assume this is some sort of issue with OFFICE 2007. You can get the graphics fine if you use the MS plugin for PDF creation, but then you have to deal with the MS version of a PDF. If you want to try it on one computer in your office, I would do that before you make the change. However, if what you have meets the need, then why change unless there are specific items that you are looking for and don't have.
    OK, that is my opinion. I am sure there are counter arguments. If I had the preference on my newer machines, I would have OFFICE 2003. Bill

  • When I open iTunes, it will not allow me to preview or download TV shows. The preview and download options are gray and will not let me view them. I have the latest Quicktime so I don't know what's wrong

    When I open iTunes, it will not allow me to preview or download TV shows. The preview and download options are gray and will not let me view them. I have tried installing the latest Quicktime but it tells me that I have to do software update and when I do, Quicktime does not appear to need an update. I have no idea what to do

    Click on your preference and check the Parental tab for possible restrictions.  Open iTunes, then click the iTunes menu, select preferences after the window opens click on the Parental icon, take a look at the content restrictions section.

  • Is there a way to set the default Initial View to Bookmarks Panel and Page on word documents that I save as PDF?

    When I save my word 2013 documents as Adobe PDF I have to open the PDF up, go to File>Properties>Initial View>Navigation Tab and then set the initial view as Bookmark Panel and Page; it gets pretty tedious.
    I use Save as Adobe PDF rather than Print to Adobe PDF Printer because I like being able to have the security settings automatically set.
    I just want to be able to save my word document as Adobe PDF with the initial view already set as Bookmark Panel and Page, and with security, so I can send it out immediately.
    Is this possible?
    Thank you.

    Use the Firefox Android Addon - Phony
    *https://addons.mozilla.org/en-US/android/addon/phony
    for more
    *https://addons.mozilla.org/en-US/android/

  • Printing microsoft word 2003 document and pdf created from the document are different

    I created a microsoft word 2003 document with jpg pictures and printed it on my HP Inkjet printer. I then created a pdf by saving as a pdf from the microsoft word 2003 document. The settings for images were 300 dpi and zip compression. The pdf file created was ~3 MB whereas the word document was ~250 KB. It looked fine on the screen but when I printed it the jpg pictures from the pdf were very dark and not very desirable. When I printed it on my HP Color laser 2600n printer I couldn't see the difference in the jpg pictures.
    I am creating the pdf files to send to the online publisher lulu.com to print. I have used the settings to create the pdf they recommend from their website; however they aren't real clear in the information they give for the recommended settings.
    My question is why would the print out be so awful using the HP Color Ink Jet printer since it is very good for printing pictures?

    There are many reasons, but most revolve around the color space and coding for the colors. Acrobat uses 8 bit RGB.

  • I recently updated my OS to OS X. I had to update my word and powerpoint etc... to 2011 version, but now when I want to open a .doc file made in word 2003 it removes all the text in it! I did not back anything up!

    I recently updated my OS to OS X. I had to update my word and powerpoint etc... to 2011 version, but now when I want to open a .doc file made in word 2003 it removes all the text in it! I did not back anything up! All my mums work is on there for her job and now she cant use it! I need help fast!

    If you updated from 2003 that must be on a Windows machine, can you recover them from there?

  • Disabling Acrobat Connect and PDFMaker 8.0 permanently in Word 2003

    I wish to disable Acrobat Connect and PDFMaker 8.0 permanently in Word 2003. I've tried several things, but they Add-on keeps appearing. Can anyone help me, please?

    Hi,
    maybe you want to delete both programs!
    Restart, check that everything is clean.
    And reinstall first word then Acrobat!
    cu,
    Sika

  • Paragraph Alignment and Justification different in Word 2003 and 2010

    Hi all,
    We are migrating some letter templates from word 2003 to word 2010 for our system and we found a alignment problem in word 2010 (actually, it is not a problem and I think the behavior in 2010 is correct)
    In word 2003, the following paragraph alignment will display like this :
    "To enjoy your membership in our service center, please remit a payment of US$
    123456789.00 per annual"
    In word 2010, the following paragraph alignment will show like this
    "To enjoy your membership in our service center, please remit a payment of
    US$ 123456789.00 per annual"
    (US$ 123456789.00 is shown on same line in 2010 but US$ and dollar amount are not
    on the same line in 2003)
    Although I think the paragraph alignment in 2010 is more reasonable, I still want to achieve back
    the look in 2003 such that we can easily to compare results.
    As in one post that I asked help in this forum, one expert shows me that there is option to set back the layout
    look behavior in 2003, I guess if there are some advance settings to achieve this?
    Please kindly advise to me on this.
    Thanks in advance for your help,
    Ray

    There is a difference, but it turns out to be a "2-factor" one. As far as I can tell, "enabling an 'east asian' language for editing" is the other factor. When you create
    a document with such a language enabled, wrapping of currency amounts works differently in Windows Word 2007 and later. Once created, the problem seems to occur even on copies of Word that only have (say) English enabled.
    In Word 2003, having such a language enabled for editing appears to make no difference.
    Whether "enabling of an 'east asian' language is the cause of the problem described by the OP, or the only thing that will result in such a difference, I cannot tell.
    Here, I tested roughly as follows:
     a. back up normal.dot/normal.dotm
     a. open Word 2010 and ensure only English is enabled as an editing language
     b. create a new document 
     c. Type 
    " $          a"
    (space, $, 10 spaces, "a", no quotation marks).
     d. Type text + spaces before that, until the "a" wraps onto the next line.
     e. save and close that
     f. enable (say) one of the Chinese languages for editing.
     g. restart Word
     h. repeat (b)-(d). This time, I think you will see that the $, 10 spaces and the "a" wrap as a unit.
     i. Save that.
     j. disable the East Asian language again and restart Word. Open each document and see how the wrapping behaves.
    Here, I happen to have Chinese enabled as one of the editing languages in my copy of Word 2003 and I do not see the "wrap as a unit" behaviour in that case, or in either
    of the two .doc fiels saved from Word 2010.
    Here, the behaviour appeared to be the same whether I used $, £ (UK pound sign) or the Yen character symbol, but not the Euro currency symbol.
    I saved my test files (including some created in Word 2003) in 2007 XML format and tried to pin down the significant difference. Per-dcoument compatibility settings
    didn't seem to be involved. Changing the w:eastAsia language attribute in the following element in the styles.xml file was enough to change the behaviour:
    <w:styles><w:docDefaults><w:rPrDefault><w:rPr><w:lang ...
    Peter Jamieson

  • Intro and Font Issue w/ Word 2003

    Hey everyone, I'm new to the board here and looks like
    there's quite a bit of good info here.
    If this has been covered already somewhere, I'd like to check
    out the thread.
    The machine I'm working with is set up with Windows 2000,
    Office 2003 (with the Word 2003 fix), updated to RoboHelp X5.0.1.
    I'm generating Win2000 help that just insists on using Times
    New Roman font in the resulting help file no matter what I do.
    Every font I change in the style in Word keeps on invading my help
    file as Times. I've messed around with the templates to no avail.
    I've copied the Robohelp.dot template into another directory
    and changed it, and that did nothing. I've also changed Normal.dot
    to see if that does anything, and am still coming up with Times New
    Roman in my help file.
    "Automatically Update Styles" is not checked underneath the
    document template file selection field, so my style changes appear
    to be sticking with the Word document when I close and re-open it.
    Any suggestions? Thanks!

    Welcome to the forum.
    Take a look just a little further down from your post and see
    the thread Wrong Font etc.
    There's a summary on my site.
    Click
    here.

  • After installing lion and updating to pages 4.1 cannot view my document content after I open the document.  Shows how many pages I have and how many words in word count, but no words...

    after installing lion and updating to pages 4.1 cannot view my document content after I open the document.  Shows how many pages I have and how many words in word count, but no words...

    Same problem. Tried reinstalling Pages. Didn't help. The behavior is like I am typing with a white font on a white background, but I am not.

Maybe you are looking for