5800 Application Issues
Hi,
Something strange has happened to my 5800, last week all of my text messages deleted themselves and the ringtone defaulted to the Nokia tune.
Since then very few of the applications on my phone work correctly. The internal web browser works fine but Nokia Maps, Garmin Sat Nav and the Gmail client don't work properly.The applications all load but Maps and Garmin fail to obtain a GPS location and gmail doesn't download any emails. In addition, BBC iPlayer requires a reinstall every time I wish to use it but Google Maps works ok.
Can anybody help?
Thanks!
Erm...
Go on to the main menu, then click settings, then click Application mgr, then click installation sett, then check if online certificate check is off if not change it to off.
If this doesn't work then do this...
There is also something else.
go to settings then go on to phone and then on to application settings and you would be presented a list full of installed applications
If none of these work then i recommed a hard reset/factory reset
REMEMBER! back up your data
Similar Messages
-
HI
some bdy had deleted APPL_TOP/admin ( in Test instance)) .ie admin directory which contains all the files for executing adutilities, how do i recreate this directory please let me knw the ans for this immediately.
I am getting erros like this
Java_top enviornment variable is not set in the environment.
Run Appsora.env or Apps<s_contextname>.env in the environment
bye
JamesDuplicate post (please post only once):
Oracle applications issue
Oracle applications issue -
When I try to use my Nokia 5800 camera it just says "Unexpected error occurred. Restart the phone." is displayed
Can someone help me ?ThanksDoes it do this the first time you use the camera after restarting the phone or does it allow you to use the camera once or twice before the problem occurs?
Also try this:
Menu > Settings > Phone > Application sett. > Camera > Image > Restore camera settings
If that doesn't help try this:
Menu > Settings > Phone > Phone mgmt. > Factory settings
You shouldn't lose any data doing this but it will reset your settings. It's wise to backup anyway.
If that still doesn't solve it, try this:
Dial *#7370#
This will fully wipe and reset the phone so all data and programs will be lost. Make sure you backup and test the camera before restoring your backup.
If that still doesn't help then you have a hardware issue. Contact the retailer or a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
Nokia 5800 screen issue!!help!
hey guys,i bought my nokia 5800 somewhere in december last year.and a couple of days ago,i began to realize that there were moving vertical lines across the screen.the lines are most visible when my light sensor(intensity) settings is set at 75%.it only came to my attention when i hard resetted my phone 2 days ago and the intensity settings was reverted to its default 75%(i've kept it customized at 25% until 2 days ago).the moving vertical lines are less visible in darker backgrounds and at a lower light intensity.i was just wondering-is this normal??has anyone been experiencing this?is there a fix to this?
p/s:this issue is different compared to the previous 'slider+screen lines' issue. the moving lines on my screen is constantly present.locking and unlocking the phone bears no effect whatsoever on the lines.
Thanks!I think I am having the same issue as yourself, it just started recently and I just bought it in April. As you stated this is not the other common screen issue where after unlocking the phone those bars show up across the screen. These are thin lines that cant be seen from far away, it is only when you look closely that they become obvious (they just keep moving vertically across the screen). I have a pure black theme on and I cannot notice them but when I use a lighter theme or use any application with any other color it becomes very apparent.
Has anyone else experienced this issue? -
Nokia 5800 applications help :(
hi, i was wondering if any one could help me as im new to all this, right i want to download applications on my phone but it wont let me,
im on virgin network and have a nokia 5800, it will let me go on th web site ovi to download the applications, but when i press download, it says 'opening a secure connection. content cannot be seen by anyone else. continue?' so i click yes and then about 2 minutes later it says ' unable to create a secure connection to this server' and has done this every time i try even when i click no it says it! so im confused can any one help please!
thanksI am having a similar issue with a collegues phone.
The first thing I did was go to the coneection settings and remove the proxy after a simialr experience on my N95 with T-Mobile.
This is a really odd one. Apparently the SSL sites work fine in the native browser with GPRS for a day or so after powering on the new phone (we are on one replacement already).
After that it asks if yo uwant to connect to the secure site OK. Looks like it's loading and then gives the message: "Web: Unable to perform operation." before closing down.
Attempts with a 3rd party browser just say that the site is unavailable though I did once, after 5-10 consecutive tries, manage to display https://gmail.com (or what it re-directs to).
Still waiting for a call back from the Virgin tech team on this one.
The proxy thing seems to work for most though but to save you writing down the port and loosing the paper in case you need it I recomend copying the default connection to one with a different name, removeing the proxy from the copy and choosing that to connect through. That way you can easily switch back if there are any issues.
Also, keep an eye on your bill. I've heard that some providers base their payment plan on the proxies so if you are on an unlimited data plan removing the proxy might make data used chargable as if it was off plan. -
5800 applications cant access the net..
in my 5800, opera mini is working fine, but no other application cant access the internet..looking forward for a solution.
Solved!
Go to Solution.Hi turtlebuster,
Welcome to Nokia Support Discussions!
Can you further elaborate on your concern? Which internet connection are you using? Have you tried using a WLAN connection to access the internet? Is there any error message? Can you access the internet using the phone browser? Can you name some of the applications you have on the phone?
We can try some basic troubleshooting steps to isolate the issue:
1. Clear your phone browser's cache. Refer to the manual for the instructions: http://nds1.nokia.com/phones/files/guides/Nokia_5800_XpressMusic_UG_en.pdf
2. Under settings, check your default access point. Make sure that you are using this access point for the other applications you are using.
3. In your phone browser, you can set the access point to "Always ask". This will enable you to choose which connection to use when using the phone browser:
Internet> three lines> Settings> General> Access Point> Always Ask.
If the above steps did not work, you can follow these steps:
1. Perform a power cycle on the phone. Turn off the phone and remove the battery for a few seconds. Place the battery back and turn on the phone.
2. You can factory reset the phone. This will not delete any personal data but it will restore the phone's default settings.
Settings>Phone>Phone mgmt>Factory settings
The default code is 12345 unless otherwise changed. After the factory reset, you can customize your settings on the phone. For internet settings, you can check with the operator.
3. Check for updates using the Nokia Suite. If none, you can try to reinstall the phone software. For video tutorials, check www.nokia.com/nokiasuite
4. If there is no progress, you can reformat the phone. This will wipe all data, thus make sure to have a backup file first to prevent data loss. You can create a backup file through Nokia Suite. To format the phone, dial *#7370# on the dialer.
Hope this helps. -
Visual Composer 7.0 Applications Issue in Portal.
Hi All,
I am developing and Deploying VC Applications in the Production Server directly,
But after 10 or 15 days the VC and WAD applications are not working properly, the BI Queries which
We are attaching are working properly.
Now we are getting these types of Errors.
1) u201CConnecting to backend system failedu201D
2) 500 Internal Server Error
3) System connection failed
When we restart our Portal server then these VC and WAD applications are working fine.
I want to know why this is happening like this, is there any problem to deploy the applications
Directly in the Production Server, if any one of know regarding this problem then please let me know.
Thanks
SriramHi Sriram,
Please check and test the system object and JCO Destination for BI system connection when you received the error message.
Check the default trace log file from server location/Netweaver administration /NWA for further investigation about your issue. OR login to http://<myhost>:<port>/irj/portal and change teh URL to http://<myhost>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.admin.logviewer.default and then search with the exact message.
Hope it will helps
Regards
Arun Jaiswal -
WebDynpro Application issue consuming asynchronous webservice from SAP PI
Hello experts i ask you for help thie following issue:
i am developing a webdynpro application which is supposed to
send some data from inputfields, and a file, in order to achieve it, that dynpro application is consuming an asyncrhronous webservice , this service is running in SAP Process integration .it uses only a component.
Iam having serious problems at mapping the asynchronous PI web service model -->to -->controller >and then to->view
since when i deploy the application into the SAP portal´s application server, it runs , but inputfields cannot be written.i dont mean unabled, what i mean, is. cannot write anything on them.ECXEPT the file upload UI element.
I have reviewed sap help page, 3 sappress books, about dynpro, and the procedure i am performind is agree with them.
endpoint test answers the folloiwng:
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/NW04S_20_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
ModuleProcessorRemote not instantiated
what i did is the same as before(in another projects weh i used to import rfc models):
1.- import webservice model,and add it to component
2.-map web service model to controller context
3.-map controller´s context to view context
4.-create actions and methods
5.-binding context controller to ui elements
Dear experts, my questions are:
What am i doing wrong?
should i permorm another steps because the web service is in another application server (SAP PI)?
Should i create a stand alone proxy and then access it from webdynpro?
when i call the web service model excution it seems does not run, neverthless the invocation does not have any syntax error , what coul it be?
Thanx in advance!!just for the sake of other who may hit this thread , the solution is to add sap-client=<clientno> in the url for wsdl
-
Interesting Application Issue with Oracle 11.1.0.6/7 (Long Post)
Just curious to see if anyone has seen anything like this - this is not a production issue, just something that I find interesting (a challenge if you will).
I have been testing Oracle 11.1.0.6 and 11.1.0.7 with an ERP package since January and have encountered an interesting issue where the ERP package throws an error "ORA-02005: implicit (-1)
length not valid for this bind or define datatype" error, when selecting the BLOB column from any table containing a BLOB - this same ERP package executes without problem with Oracle
10.2.0.2/10.2.0.3/10.2.0.4. The table definition is as follows:
PART_ID NOT NULL VARCHAR2(30)
TYPE NOT NULL CHAR(1)
BITS BLOB
BITS_LENGTH NOT NULL NUMBER(38)The previous version of the ERP package had the same table defined as follows, and the previous version of the ERP package had no problem with Oracle 11.1.0.6:
PART_ID NOT NULL VARCHAR2(30)
TYPE NOT NULL CHAR(1)
BITS LONG RAW
BITS_LENGTH NOT NULL NUMBER(38)One of the SQL statements which is tossing the error:
SELECT BITS FROM PART_MFG_BINARY where TYPE = :1 and PART_ID = :2
A portion of a 10046 trace from Oracle 10.2.0.2 for comparison:
=====================
PARSING IN CURSOR #2 len=87 dep=0 uid=30 oct=3 lid=30 tim=749963475 hv=1159951869 ad='53a45ac8'
select mfg_name, mfg_part_id from part where id = :1
END OF STMT
PARSE #2:c=0,e=1427,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=749963466
BINDS #2:
kkscoacd
Bind#0
oacdty=96 mxl=32(09) mxlc=00 mal=00 scl=00 pre=00
oacflg=01 fl2=1000000 frm=01 csi=178 siz=32 off=0
kxsbbbfp=380b9b68 bln=32 avl=09 flg=05
value="98567109M"
EXEC #2:c=0,e=3357,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=749971833
FETCH #2:c=0,e=52,p=0,cr=3,cu=0,mis=0,r=1,dep=0,og=1,tim=749971968
FETCH #2:c=0,e=2,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,tim=749973655
=====================
PARSING IN CURSOR #3 len=59 dep=0 uid=30 oct=3 lid=30 tim=749983314 hv=2907586799 ad='5457f690'
select part_udf_labels from APPLICATION_GLOBAL
END OF STMT
PARSE #3:c=0,e=3389,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=749983305
BINDS #3:
EXEC #3:c=0,e=152,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=749986393
FETCH #3:c=0,e=124,p=0,cr=7,cu=0,mis=0,r=1,dep=0,og=1,tim=749988214
STAT #3 id=1 cnt=1 pid=0 pos=1 obj=11925 op='TABLE ACCESS FULL APPLICATION_GLOBAL (cr=7 pr=0 pw=0 time=104 us)'
=====================
PARSING IN CURSOR #3 len=59 dep=0 uid=30 oct=3 lid=30 tim=749992936 hv=2907586799 ad='5457f690'
select part_udf_labels from APPLICATION_GLOBAL
END OF STMT
PARSE #3:c=0,e=117,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=749992932
BINDS #3:
EXEC #3:c=0,e=83,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=749996097
FETCH #3:c=0,e=116,p=0,cr=7,cu=0,mis=0,r=1,dep=0,og=1,tim=749997800
STAT #2 id=1 cnt=1 pid=0 pos=1 obj=12429 op='TABLE ACCESS BY INDEX ROWID PART (cr=3 pr=0 pw=0 time=48 us)'
STAT #2 id=2 cnt=1 pid=1 pos=1 obj=12436 op='INDEX UNIQUE SCAN SYS_C005496 (cr=2 pr=0 pw=0 time=28 us)'
=====================
PARSING IN CURSOR #2 len=99 dep=0 uid=30 oct=3 lid=30 tim=750003263 hv=1519706035 ad='7e235fc0'
SELECT BITS FROM PART_MFG_BINARY where TYPE = :1 and PART_ID = :2
END OF STMT
PARSE #2:c=0,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=750003255
BINDS #2:
kkscoacd
Bind#0
oacdty=96 mxl=32(01) mxlc=00 mal=00 scl=00 pre=00
oacflg=01 fl2=1000000 frm=01 csi=178 siz=64 off=0
kxsbbbfp=380bdcd8 bln=32 avl=01 flg=05
value="D"
Bind#1
oacdty=96 mxl=32(09) mxlc=00 mal=00 scl=00 pre=00
oacflg=01 fl2=1000000 frm=01 csi=178 siz=0 off=32
kxsbbbfp=380bdcf8 bln=32 avl=09 flg=01
value="98567109M"
EXEC #2:c=0,e=2512,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=750022595
FETCH #2:c=0,e=33,p=0,cr=1,cu=0,mis=0,r=0,dep=0,og=1,tim=750024142
STAT #2 id=1 cnt=0 pid=0 pos=1 obj=101246 op='TABLE ACCESS BY INDEX ROWID PART_MFG_BINARY (cr=1 pr=0 pw=0 time=30 us)'
STAT #2 id=2 cnt=0 pid=1 pos=1 obj=101249 op='INDEX UNIQUE SCAN SYS_C0018720 (cr=1 pr=0 pw=0 time=21 us)'
=====================
A portion of a 10046 trace from Oracle 11.1.0.6:
=====================
PARSING IN CURSOR #3 len=87 dep=0 uid=59 oct=3 lid=59 tim=1023659125907 hv=1159951869 ad='22a109c8' sqlid='7k8rzcj2k6xgx'
select mfg_name, mfg_part_id from part where id = :1
END OF STMT
PARSE #3:c=0,e=432,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=1023659125903
BINDS #3:
Bind#0
oacdty=96 mxl=32(09) mxlc=00 mal=00 scl=00 pre=00
oacflg=01 fl2=1000000 frm=01 csi=178 siz=32 off=0
kxsbbbfp=0c6e0fd4 bln=32 avl=09 flg=05
value="98567109M"
EXEC #3:c=0,e=1068,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=1023659130848
FETCH #3:c=0,e=37,p=0,cr=3,cu=0,mis=0,r=1,dep=0,og=1,tim=1023659132062
STAT #3 id=1 cnt=1 pid=0 pos=1 obj=67567 op='TABLE ACCESS BY INDEX ROWID PART (cr=3 pr=0 pw=0 time=0 us cost=2 size=14 card=1)'
STAT #3 id=2 cnt=1 pid=1 pos=1 obj=69248 op='INDEX UNIQUE SCAN SYS_C0011926 (cr=2 pr=0 pw=0 time=0 us cost=1 size=0 card=1)'
=====================
PARSING IN CURSOR #6 len=59 dep=0 uid=59 oct=3 lid=59 tim=1023659138710 hv=2907586799 ad='22a44ae8' sqlid='3n102kqqnwh7g'
select part_udf_labels from APPLICATION_GLOBAL
END OF STMT
PARSE #6:c=0,e=701,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=1023659138706
BINDS #6:
EXEC #6:c=0,e=51,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=1023659142030
FETCH #6:c=0,e=55,p=0,cr=3,cu=0,mis=0,r=1,dep=0,og=1,tim=1023659143936
STAT #6 id=1 cnt=1 pid=0 pos=1 obj=67410 op='TABLE ACCESS FULL APPLICATION_GLOBAL (cr=3 pr=0 pw=0 time=0 us cost=3 size=146 card=1)'
=====================
PARSING IN CURSOR #6 len=59 dep=0 uid=59 oct=3 lid=59 tim=1023659148354 hv=2907586799 ad='22a44ae8' sqlid='3n102kqqnwh7g'
select part_udf_labels from APPLICATION_GLOBAL
END OF STMT
PARSE #6:c=0,e=40,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=1023659148351
BINDS #6:
EXEC #6:c=0,e=89,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=1023659151927
FETCH #6:c=0,e=46,p=0,cr=3,cu=0,mis=0,r=1,dep=0,og=1,tim=1023659153664
STAT #6 id=1 cnt=1 pid=0 pos=1 obj=67410 op='TABLE ACCESS FULL APPLICATION_GLOBAL (cr=3 pr=0 pw=0 time=0 us cost=3 size=146 card=1)'
=====================
PARSING IN CURSOR #3 len=99 dep=0 uid=59 oct=3 lid=59 tim=1023659158452 hv=1519706035 ad='22a10580' sqlid='gm6bkj9d99rxm'
SELECT BITS FROM PART_MFG_BINARY where TYPE = :1 and PART_ID = :2
END OF STMT
PARSE #3:c=0,e=399,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=1023659158448
XCTEND rlbk=1, rd_only=1In the above, notice the rollback (XCTEND rlbk=1, rd_only=1) before Oracle would have output the bind variable values in the trace file (bind variable values were never written).
(Continued...)
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.SQLNet Trace at level 16, 10.2.0.1 client -> 10.2.0.2 server, no problems
nioqrc: entry
nsdo: entry
nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
nsdofls: entry
nsdofls: DATA flags: 0x0
nsdofls: sending NSPTDA packet
nspsend: entry
nspsend: plen=276, type=6
nttwr: entry
nttwr: socket 340 had bytes written=276
nttwr: exit
nspsend: packet dump
nspsend: 01 14 00 00 06 00 00 00 |........|
nspsend: 00 00 03 5E 85 09 80 02 |...^....|
nspsend: 00 02 00 00 00 01 63 00 |......c.|
nspsend: 00 00 01 0D 00 00 00 00 |........|
nspsend: 01 00 00 00 00 01 00 00 |........|
nspsend: 00 00 00 00 00 01 02 00 |........|
nspsend: 00 00 00 00 00 00 01 01 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 01 63 53 45 4C 45 43 |..cSELEC|
nspsend: 54 20 42 49 54 53 20 46 |T.BITS.F|
nspsend: 52 4F 4D 20 50 41 52 54 |ROM.PART|
nspsend: 5F 4D 46 47 5F 42 49 4E |_MFG_BIN|
nspsend: 41 52 59 20 20 77 68 65 |ARY..whe|
nspsend: 72 65 20 54 59 50 45 20 |re.TYPE.|
nspsend: 3D 20 3A 31 20 20 20 20 |=.:1....|
nspsend: 20 20 20 61 6E 64 20 50 |...and.P|
nspsend: 41 52 54 5F 49 44 20 3D |ART_ID.=|
nspsend: 20 3A 32 20 20 20 20 20 |.:2.....|
nspsend: 20 20 20 20 20 20 20 20 |........|
nspsend: 20 20 20 20 20 20 20 20 |........|
nspsend: 20 20 20 20 20 20 01 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 01 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 01 80 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 01 |........|
nspsend: 80 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 |.... |
nspsend: 276 bytes to transport
nspsend: normal exit
nsdofls: exit (0)
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nsdo: entry
nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: switching to application buffer
nsrdr: entry
nsrdr: recving a packet
nsprecv: entry
nsprecv: reading from transport...
nttrd: entry
nttrd: socket 340 had bytes read=223
nttrd: exit
nsprecv: 223 bytes from transport
nsprecv: tlen=223, plen=223, type=6
nsprecv: packet dump
nsprecv: 00 DF 00 00 06 00 00 00 |........|
nsprecv: 00 00 10 17 34 44 80 BB |....4D..|
nsprecv: 49 5F 2C 75 8A 72 99 F9 |I_,u.r..|
nsprecv: B3 DF 94 5A 78 6C 0B 18 |...Zxl..|
nsprecv: 08 30 12 00 00 00 00 01 |.0......|
nsprecv: 00 00 00 4D 71 00 00 00 |...Mq...|
nsprecv: A0 0F 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 01 04 04 00 00 00 04 |........|
nsprecv: 42 49 54 53 00 00 00 00 |BITS....|
nsprecv: 00 00 00 00 00 00 07 00 |........|
nsprecv: 00 00 07 78 6C 0B 18 0C |...xl...|
nsprecv: 17 2C 01 00 00 00 E8 1F |.,......|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 08 06 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 02 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 04 01 00 |........|
nsprecv: 00 00 83 01 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 02 00 |........|
nsprecv: 11 00 03 00 00 00 00 00 |........|
nsprecv: C3 88 01 00 04 00 00 0D |........|
nsprecv: EA 0A 00 0E 00 00 00 00 |........|
nsprecv: 00 00 85 00 00 01 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 |....... |
nsprecv: normal exit
nsrdr: got NSPTDA packet
nsrdr: NSPTDA flags: 0x0
nsrdr: normal exit
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: *what=1, *bl=2001
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nioqrc: exit
nioqsn: entry
nioqsn: exit
nioqrc: entry
nsdo: entry
nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
nsdofls: entry
nsdofls: DATA flags: 0x0
nsdofls: sending NSPTDA packet
nspsend: entry
nspsend: plen=218, type=6
nttwr: entry
nttwr: socket 340 had bytes written=218
nttwr: exit
nspsend: packet dump
nspsend: 00 DA 00 00 06 00 00 00 |........|
nspsend: 00 00 03 5E 86 78 80 00 |...^.x..|
nspsend: 00 02 00 00 00 00 00 00 |........|
nspsend: 00 00 01 0D 00 00 00 00 |........|
nspsend: 01 00 00 00 00 01 00 00 |........|
nspsend: 00 14 00 00 00 01 02 00 |........|
nspsend: 00 00 00 00 00 00 01 01 |........|
nspsend: 01 00 00 00 00 00 00 00 |........|
nspsend: 00 01 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 01 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 60 01 |......`.|
nspsend: 00 00 01 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 B2 00 01 00 |........|
nspsend: 00 00 00 60 01 00 00 09 |...`....|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 B2 00 01 00 00 00 00 |........|
nspsend: 71 05 00 00 14 00 00 00 |q.......|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 07 01 44 |.......D|
nspsend: 09 30 39 35 34 37 30 30 |.9856710|
nspsend: 39 4D |9M |
nspsend: 218 bytes to transport
nspsend: normal exit
nsdofls: exit (0)
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nsdo: entry
nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: switching to application buffer
nsrdr: entry
nsrdr: recving a packet
nsprecv: entry
nsprecv: reading from transport...
nttrd: entry
nttrd: socket 340 had bytes read=223
nttrd: exit
nsprecv: 223 bytes from transport
nsprecv: tlen=223, plen=223, type=6
nsprecv: packet dump
nsprecv: 00 DF 00 00 06 00 00 00 |........|
nsprecv: 00 00 10 17 34 44 80 BB |....4D..|
nsprecv: 49 5F 2C 75 8A 72 99 F9 |I_,u.r..|
nsprecv: B3 DF 94 5A 78 6C 0B 18 |...Zxl..|
nsprecv: 08 30 12 00 00 00 00 01 |.0......|
nsprecv: 00 00 00 4D 71 00 00 00 |...Mq...|
nsprecv: A0 0F 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 01 04 04 00 00 00 04 |........|
nsprecv: 42 49 54 53 00 00 00 00 |BITS....|
nsprecv: 00 00 00 00 00 00 07 00 |........|
nsprecv: 00 00 07 78 6C 0B 18 0C |...xl...|
nsprecv: 17 2C 01 00 00 00 E8 1F |.,......|
nsprecv: 00 00 02 00 00 00 02 00 |........|
nsprecv: 00 00 08 06 00 B5 D0 3D |.......=|
nsprecv: 47 00 00 00 00 02 00 00 |G.......|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 04 01 00 |........|
nsprecv: 00 00 84 01 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 02 00 |........|
nsprecv: 00 00 03 00 00 00 00 00 |........|
nsprecv: C3 88 01 00 04 00 00 0D |........|
nsprecv: EA 0A 00 0E 00 00 00 00 |........|
nsprecv: 00 00 86 00 00 01 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 |....... |
nsprecv: normal exit
nsrdr: got NSPTDA packet
nsrdr: NSPTDA flags: 0x0
nsrdr: normal exit
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: *what=1, *bl=2001
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nioqrc: exit
nioqsn: entry
nioqsn: exit
nioqrc: entry
nsdo: entry
nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
nsdofls: entry
nsdofls: DATA flags: 0x0
nsdofls: sending NSPTDA packet
nspsend: entry
nspsend: plen=21, type=6
nttwr: entry
nttwr: socket 340 had bytes written=21
nttwr: exit
nspsend: packet dump
nspsend: 00 15 00 00 06 00 00 00 |........|
nspsend: 00 00 03 05 87 02 00 00 |........|
nspsend: 00 01 00 00 00 |..... |
nspsend: 21 bytes to transport
nspsend: normal exit
nsdofls: exit (0)
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nsdo: entry
nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: switching to application buffer
nsrdr: entry
nsrdr: recving a packet
nsprecv: entry
nsprecv: reading from transport...
nttrd: entry
nttrd: socket 340 had bytes read=102
nttrd: exit
nsprecv: 102 bytes from transport
nsprecv: tlen=102, plen=102, type=6
nsprecv: packet dump
nsprecv: 00 66 00 00 06 00 00 00 |.f......|
nsprecv: 00 00 04 01 00 00 00 85 |........|
nsprecv: 01 00 00 00 00 7B 05 00 |.....{..|
nsprecv: 00 00 00 02 00 00 00 03 |........|
nsprecv: 00 00 00 00 00 C3 88 01 |........|
nsprecv: 00 04 00 00 0D EA 0A 00 |........|
nsprecv: 0E 00 00 00 00 00 00 87 |........|
nsprecv: 00 00 01 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 19 4F 52 41 |.....ORA|
nsprecv: 2D 30 31 34 30 33 3A 20 |-01403:.|
nsprecv: 6E 6F 20 64 61 74 61 20 |no.data.|
nsprecv: 66 6F 75 6E 64 0A |found. |
nsprecv: normal exit
nsrdr: got NSPTDA packet
nsrdr: NSPTDA flags: 0x0
nsrdr: normal exit
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: *what=1, *bl=2001
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nioqrc: exit
SQLNet Trace at level 16, 10.2.0.1 client -> 11.1.0.6 server, not successful
nioqrc: entry
nsdo: entry
nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
nsdofls: entry
nsdofls: DATA flags: 0x0
nsdofls: sending NSPTDA packet
nspsend: entry
nspsend: plen=177, type=6
nttwr: entry
nttwr: socket 308 had bytes written=177
nttwr: exit
nspsend: packet dump
nspsend: 00 B1 00 00 06 00 00 00 |........|
nspsend: 00 00 03 4A FE 01 00 00 |...J....|
nspsend: 00 03 00 00 00 78 14 FD |.....x..|
nspsend: 02 63 00 00 00 00 00 00 |.c......|
nspsend: 00 00 00 00 00 48 D8 12 |.....H..|
nspsend: 00 01 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 63 53 45 4C 45 43 54 |.cSELECT|
nspsend: 20 42 49 54 53 20 46 52 |.BITS.FR|
nspsend: 4F 4D 20 50 41 52 54 5F |OM.PART_|
nspsend: 4D 46 47 5F 42 49 4E 41 |MFG_BINA|
nspsend: 52 59 20 20 77 68 65 72 |RY..wher|
nspsend: 65 20 54 59 50 45 20 3D |e.TYPE.=|
nspsend: 20 3A 31 20 20 20 20 20 |.:1.....|
nspsend: 20 20 61 6E 64 20 50 41 |..and.PA|
nspsend: 52 54 5F 49 44 20 3D 20 |RT_ID.=.|
nspsend: 3A 32 20 20 20 20 20 20 |:2......|
nspsend: 20 20 20 20 20 20 20 20 |........|
nspsend: 20 20 20 20 20 20 20 20 |........|
nspsend: 20 20 20 20 20 02 00 00 |........|
nspsend: 00 |. |
nspsend: 177 bytes to transport
nspsend: normal exit
nsdofls: exit (0)
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nsdo: entry
nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: switching to application buffer
nsrdr: entry
nsrdr: recving a packet
nsprecv: entry
nsprecv: reading from transport...
nttrd: entry
nttrd: socket 308 had bytes read=106
nttrd: exit
nsprecv: 106 bytes from transport
nsprecv: tlen=106, plen=106, type=6
nsprecv: packet dump
nsprecv: 00 6A 00 00 06 00 00 00 |.j......|
nsprecv: 00 00 04 05 00 00 00 FC |........|
nsprecv: 01 01 01 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 03 00 00 00 |........|
nsprecv: 03 00 00 00 00 00 30 0A |......0.|
nsprecv: 01 00 05 00 00 00 86 2A |.......*|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 FE 00 00 01 00 |........|
nsprecv: 00 00 36 01 00 00 00 00 |..6.....|
nsprecv: 00 00 58 BF 0C 0E 00 00 |..X.....|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 |.. |
nsprecv: normal exit
nsrdr: got NSPTDA packet
nsrdr: NSPTDA flags: 0x0
nsrdr: normal exit
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: *what=1, *bl=2001
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nioqrc: exit
nioqsn: entry
nioqsn: exit
nioqrc: entry
nsdo: entry
nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
nsdofls: entry
nsdofls: DATA flags: 0x0
nsdofls: sending NSPTDA packet
nspsend: entry
nspsend: plen=49, type=6
nttwr: entry
nttwr: socket 308 had bytes written=49
nttwr: exit
nspsend: packet dump
nspsend: 00 31 00 00 06 00 00 00 |.1......|
nspsend: 00 00 03 2B FF 03 00 00 |...+....|
nspsend: 00 01 00 00 00 90 DA C2 |........|
nspsend: 01 60 A2 C2 01 20 00 00 |.`......|
nspsend: 00 92 DA C2 01 94 DA C2 |........|
nspsend: 01 C0 03 00 00 54 DE C2 |.....T..|
nspsend: 01 |. |
nspsend: 49 bytes to transport
nspsend: normal exit
nsdofls: exit (0)
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nsdo: entry
nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: switching to application buffer
nsrdr: entry
nsrdr: recving a packet
nsprecv: entry
nsprecv: reading from transport...
nttrd: entry
nttrd: socket 308 had bytes read=79
nttrd: exit
nsprecv: 79 bytes from transport
nsprecv: tlen=79, plen=79, type=6
nsprecv: packet dump
nsprecv: 00 4F 00 00 06 00 00 00 |.O......|
nsprecv: 00 00 08 01 00 01 00 01 |........|
nsprecv: 71 00 00 00 A0 0F 00 00 |q.......|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 01 04 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 05 00 05 42 49 54 53 22 |...BITS"|
nsprecv: 09 05 00 00 00 FD 01 |....... |
nsprecv: normal exit
nsrdr: got NSPTDA packet
nsrdr: NSPTDA flags: 0x0
nsrdr: normal exit
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: *what=1, *bl=2001
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nioqrc: exit
nioqsn: entry
nioqsn: exit
nioqrc: entry
nsdo: entry
nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
nsdofls: entry
nsdofls: DATA flags: 0x0
nsdofls: sending NSPTDA packet
nspsend: entry
nspsend: plen=33, type=6
nttwr: entry
nttwr: socket 308 had bytes written=33
nttwr: exit
nspsend: packet dump
nspsend: 00 21 00 00 06 00 00 00 |.!......|
nspsend: 00 00 03 15 00 D5 07 00 |........|
nspsend: 00 00 00 00 00 EB 8B DB |........|
nspsend: 00 C8 00 00 00 48 D8 12 |.....H..|
nspsend: 00 |. |
nspsend: 33 bytes to transport
nspsend: normal exit
nsdofls: exit (0)
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nsdo: entry
nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: switching to application buffer
nsrdr: entry
nsrdr: recving a packet
nsprecv: entry
nsprecv: reading from transport...
nttrd: entry
nttrd: socket 308 had bytes read=96
nttrd: exit
nsprecv: 96 bytes from transport
nsprecv: tlen=96, plen=96, type=6
nsprecv: packet dump
nsprecv: 00 60 00 00 06 00 00 00 |.`......|
nsprecv: 00 00 08 4B 00 4B 4F 52 |...K.KOR|
nsprecv: 41 2D 30 32 30 30 35 3A |A-02005:|
nsprecv: 20 69 6D 70 6C 69 63 69 |.implici|
nsprecv: 74 20 28 2D 31 29 20 6C |t.(-1).l|
nsprecv: 65 6E 67 74 68 20 6E 6F |ength.no|
nsprecv: 74 20 76 61 6C 69 64 20 |t.valid.|
nsprecv: 66 6F 72 20 74 68 69 73 |for.this|
nsprecv: 20 62 69 6E 64 20 6F 72 |.bind.or|
nsprecv: 20 64 65 66 69 6E 65 20 |.define.|
nsprecv: 64 61 74 61 74 79 70 65 |datatype|
nsprecv: 0A 09 05 00 00 00 FD 01 |........|
nsprecv: normal exit
nsrdr: got NSPTDA packet
nsrdr: NSPTDA flags: 0x0
nsrdr: normal exit
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: *what=1, *bl=2001
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: normal exit
nioqrc: exit
nioqsn: entry
nioqsn: exit
nioqrc: entry
nsdo: entry
nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
snsbitts_ts: entry
snsbitts_ts: acquired the bit
snsbitts_ts: normal exit
nsdo: rank=64, nsctxrnk=0
snsbitcl_ts: entry
snsbitcl_ts: normal exit
nsdo: nsctx: state=8, flg=0x400d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
{code}
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. & -
Weblogic 8.1 to 9.2 upgrade of web application Issues
Hi,
I am trying to migrate an Weblogic 8.1 web application project (based on netui/struts/pageflows) to 9.2 using the workshop upgrade utility. During the upgrade, i get the following errors(note, this is not after upgrade but during upgrade itself).
====================================================================================================
!SUBENTRY 1 com.bea.wlw.upgrade <ERROR> <RESOURCE: /RMSPortal/WebContent/visitorTools/skeletons/edittogglebutton.jsp> 2010-07-06 16:37:51.341
!MESSAGE Exception caught during upgrade of "edittogglebutton.jsp"
!STACK 0
java.lang.LinkageError: loader constraints violated when linking javax/xml/namespace/QName class
====================================================================================================
Please let me know if this is an issue or can be ignored ? or how can i get rid of this error ?
Regards,
RamHi,
I am trying to migrate an Weblogic 8.1 web application project (based on netui/struts/pageflows) to 9.2 using the workshop upgrade utility. During the upgrade, i get the following errors(note, this is not after upgrade but during upgrade itself).
====================================================================================================
!SUBENTRY 1 com.bea.wlw.upgrade <ERROR> <RESOURCE: /RMSPortal/WebContent/visitorTools/skeletons/edittogglebutton.jsp> 2010-07-06 16:37:51.341
!MESSAGE Exception caught during upgrade of "edittogglebutton.jsp"
!STACK 0
java.lang.LinkageError: loader constraints violated when linking javax/xml/namespace/QName class
====================================================================================================
Please let me know if this is an issue or can be ignored ? or how can i get rid of this error ?
Regards,
Ram -
Macbook Pro wifi and application issues, everything slow
Hey guys,
So my macbook pro has been giving me a lot of issues lately. It doesn't appear to be one particular problem and it's spread out across applications. Here's my situation:
The wifi connection in my dorm room wont work all of a sudden. It's the schools wifi, so I can't mess with. But my roommate, who also has a macbook pro, is having no problems at all. So I think it's just my computer. It SAYS I'm connected to the internet and has full connection, but it doesn't go through.
Here's the weird thing... I CAN connect to any other wifi on campus just fine. And all ethernet ports work fine.
I'm also having trouble with a variety of applications. My Twitter app, mail wont load anything, Itunes store is slow or doesn't work, the App store wont open, Celtx.....
I think it's all programs that require some sort of internet connection to function. And it's really strange how all these applications still don't work right even when I DO have internet connection (through ethernet or other wifi).
Few notes: I've tried reseting the permissions, and I have 40GB free on my harddrive. It's been happening for a week now, and I've tried rebooting many times. I did a large software update right before it started happening, but I'm not sure if they are related.
What do you think? Is this something I can fix on my own? Or is something damaged on my computer?
HELP!Alright, Gryphonator, looks like you're being hijacked. Try the following:
1) Go to this webpage and download the latest stable version of Opera (in case you don't know, it's a Web browser, and if you don't like it, you can ditch it whenever you want); save it to your Desktop
2) Reboot your Mac in Safe Mode by keeping the Shift key down on startup until you get the Apple grey backdrop AND a progress bar. Once this shows onscreen, you can lift your finger from the Shift key
3) Once in Safe Mode, you are not connected to the Internet (unplug your Ethernet cable before you do anything), and only the basic OS X kernel extensions are running, so try and install Opera on your regular user account
4) Plug your Ethernet cable and try to connect to the Internet (you should be able to)
5) Unplug the Ethernet cable, and reboot normally
6) Once your Mac is up and running, try browsing the Web with Opera
7) Let us know of your progress (or lack thereof...)
The point of installing/using Opera is that it doesn't yet exist on your system, so it can't have corrupt plist preferences files and the like. Installing it in Safe Mode will prevent whatever is playing with your Internet connection from wreaking havoc with install.
Finally, for all its flaws, Opera is probably the safest Web browser there is. I've never been hijacked once in all the years I've used it, even when using Windows as my primary OS (see, you CAN turn to the Dark Side of the Force and come back!)
Keep us posted! -
Importing LCA applications issues
Hello everybody.
In the last few days I've been working with the LCES2 Linux virtual appliance made available by Adobe and I tried to import a fairly complex application developed with LCES 8.2.1.
I stumbled across a few issues I'd like to share with you.
The LCA archive was created with LCES WorkBench and I had no issues with previous versions of LCES; in LCES2, I had to import it using adminui [LiveCycle Archives (8.x)] and then, using LCES2 WB, I had to create a new application and import Processes and Resources from the server.
Once the operation completed, I noticed the following:
1) FTP Exceptions are not handled
I had a couple of FTP "Get to filesystem" and "Put" operations whose "FTPConnectionException" was not handled and caused a LCES exception; as a workaround, I had to remove the exception and "re-draw" it as to point again to the handling block (and it worked).
2) SubProcess renaming
The main process had a subprocess named "PDF/A Operations" which, once imported into LCES2 WorkBench, was renamed (in the [Applications] view) as "A Operations". This seems to be a cosmetic issue since I did not have to change the invoking block as to reflect the change of the name.
3) Accented characters
In both a "Send with Document" email operation or in a simple assignment (Setvalue/Execute) I had an expression which contained accented characters (eg, à or è); I had to edit the message/assignment as to retype the offending characters (which got depicted as []) as to let LCES2 handle them as expected). The same went for the GeneratePDFOutput which suffered from the same "disease"
4) Missing Font
Since the original project was developed on a Windows 2003 server, I had to change a couple of fonts (namely, the "Times New Roman" one) in a form since this font does not exist under Linux by default (and I did not want to spend a lot of time by importing the missing fonts into the Linux box)
5) Import issue
I had a process who got incorrectly imported into the new LCES2 environment; by "incorrectly imported" I mean there are some operations (which existed in the LCES 8.2 one) which have not been imported into LCES2. I've still to fix it but I think a simple XML export from LCES WB + Import *might* fix it.
If you have suggestions/opinions, please let me know.
Have a nice Xmas time.
RobIn the Region Inspector on the left of your Arrange you find a little box labeled "follow tempo" - if you untick that box the Audio will play at the original speed.
-
Flex 4.1 sdk application issue
My application consists of 4 modules developed in flex sdk 4.0, has resource bundles (eng and spanish), now we designed 5th module with flex sdk4.1 has eng and spanish resource bundles, when i
compile and run the whole app(5 modules) under unix environment with sdk4.0, every module is loading fine, until the 5th modules loads, when 5th module loads, for the first time spanish language is not
loading, the whole page is blank, when i switch back to english it is loading everything and then clicked spanish it is working fine, every time when i change the viewstack the spanish is not working for the
first time. I debugged the issue, it is not giving any error,
intialize() method is called, creationcomplete is not called for viewstack main component,
i changed all 5 modules to flex sdk4.1 and complied and it runs fine without spanish loading problem.
my question is their any way i can use use sdk4.0 and run the application,
is they any issue of developing one module with sdk4.1 and compling it with 4.0?thanks for the reply Alex,
5 modules with sdk 4.1 working fine,
same 5 modules with sdk 4.0, spanish language is not working on the first load. no compilation errors, no run-time issues, but page was blank.
even though in same sdk it is not working please advise...
thanks. -
Nokia 5800 applications on nokia.co.in
Most of the applications available for download for the Nokia 5800 on nokia.co.in have expired certificates or just down work at all. I hope someone in charge of that site / applications will fix this asap.
Smartguard - > The application is not valid
Touch Card->Expired Certificate
Touch Maneuver->Expired Certificate
SMS Timer-> Wont work at all
Solved!
Go to Solution.Thats been left without care for a long time now, why should they if all applications are available on the Ovi store.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks. -
ADF application Issue with IE8 and IE9
Hi Everybody,
We are developing application under ADF. The application works fine in Firefox and chrome but when we open the application in IE8 and IE9 it pop up a message saying compatibility view should be turned off.Even though we turn off the compatibility view mode,The task flows that launches the jsff page are displaying blank page.In other words , I am not able to see any UI components in the page.Anybody has a clue on this?.Please Help
Thanks,
Harish
Edited by: 886523 on Oct 17, 2012 4:08 AMHi,
rule number 1: This is a public forum. Please don't post issues regarding internal builds. Only issue related to public builds should be posted here!
Beside of this, your post doesn't provide enough information to reproduce the problem (or a test case to try and run)
Frank
Maybe you are looking for
-
hi, I'm trying to setup a VPN solution, connecting to a 800 series router and authenticating off a Cisco ACS tacacs server. I've basically followed the suggested config at http://www.cisco.com/en/US/customer/tech/tk59/technologies_configuration_examp
-
How to avoid "DBIF_RSQL_SQL_ERROR" while updating data to a ztable?
Hi Friends, I am in urgent need of solution to reduce or come out DBIF_RSQL_SQL_ERROR at time of updating a Z table. the code are below mentioned. There is no inconsistency b/w table and internal table strcture.I also used commit work.Buat everthing
-
Hello, Although I have put the CLASSPATH as it should be in my environment variables ( I am using windows XP for the moment, but I had the same problem on Linux Kubuntu ), I still can't have the Diagnostics applet working. Any ideas to solve this ...
-
I have a report from SQL query built that displays data in a table based on a parameter passed to the report. I have a web site field that changes based on organization passed to this from the database and I would like this to link to the web site. I
-
The SharePoint item being crawled returned an error when attempting to download the item.
I get this error when I run full crawl. The SharePoint item being crawled returned an error when attempting to download the item. I did make sure that the crawl account has full read access to the web application. I am able to access the page and sit