5800 bluetooth dead after firmware v50

Hi,
i recently upgraded to firmware v50.0.005.C01.01 but ever since I cannot get bluetooth to be on.
Whenever I try to switch it on it just pops up with an "unable to perform bluetooth operation".
I did the three finger salute (hard reset) but no joy.
Anyone know if there is perhaps some other setting that blocks bluetooth?
Or is there some more technical way to find out what is failing?

No, I never removed the battery for the reset, but have removed the battery a few times afterwards as it likes to hang every now and then.
Is there any experience that reinstalling the same firmware has different results?
I saw the option to do that but did not want to go through the whole restore process as UDP (user data protection) on my 5800 never seemed to work... ovi.com did pull through everytime though.

Similar Messages

Bluetooth-dead after coming out of sleep-have to shutdown/back on with switch-then all is normal again-help please

Intel iMac-bluetooth seems dead after sleep. Screen will come on after pushing power button, but wireless keyboard, trackpad, and mouse are dead. Shutdown using power button, push again to turn back on and all is back to normal...any idea what is going on?

There's a long thread here about this problem (and I think I've seen several others):
https://discussions.apple.com/thread/2223188?start=345&tstart=0
Seemed to start as a Snow Leopard issue but seems to have morphed into a Lion problem for some.
I have experienced the problem myself since updating to Lion, although only a couple of times. My workround is to set computer sleep to 'never'. Hoping that 10.7.2 will address the problem whenever it is released.

Thunderbolt Display "dead" after firmware upgrade to Version 1.2

Hi,
I just run the Thunderbolt F/W update to 1.2 as offered by the AppStore Update. I have a 2014 MacPro with 2 Displays connected. In good faith I just confirmed to apply the update without much reading the fine print. The F/W update brought the system to a complete standstill. After 2 hours of waiting in the boot screen, I rebooted the system manually (5 secs power button). One of the Thunderbolt displays first just flickered, then decided to completely die. The System report says: unknown device in the Thunderbolt section. The 2nd display hasn't been updated during this procedure.
How can the F/W of the 'dead' display be re-installed? I also tried to connect it to a MacBook pro. Same result. The display is entirely black.
Any help or suggestion is much appreciated. Thanks!

Put me on the list as well.
I've had this TB display for two years and have had no issue with it. Clicked OK on the firmware prompt and now I have a $1000 paperweight/laptop charger.
What I have tried:
Reset SMC and NVRAM on my MBP.
Unplugged the display from power and all peripherals and let it sit for ~24 hours before trying again.
Downloaded the firmware installer from Thunderbolt Display Firmware Update v1.2. It tells me that no thunderbolt display is connected.
So far nothing has produced a result.
System report shows an unknown device on the TB port.
A used logic board for the display is around USD$220 on ebay.
I really wish I had not attempted to install the firmware now.

Nokia 5800 restarting automatically after firmware...

recently i had updated my firmware through phone itself,after that its getting restarted automatically once or twice in a day. Since the problem persists i reinstalled the s/w through system also.but the problem is still there ,can anybody help me

hi, I had same problem when I upgraded my damned 5800 to version 50. At first after the upgrade, it was reseting once in 2-3 minutes. I decided to format sd card and after that reseting times reduced to twice a day espicially after sending sms. Changing the microsdhc card with an old one with 1 GB capacity, compeletely solved the problem. Yesterday I bought a brand new micro sdhc : Verbatim 8GB class 4; but its the problem : its not working well. its slow and while connecting to pc it causes some fault. but the restarting problem is solved. Please recommand me a good microsdhc card.

SunRay 2FS DTUs dead after Firmware upgrade?

Hi everyone,
although I am fairly experienced in Solaris this whole Thin Client business is a bit of unchartered territory to me as of yet... following situation:
I got 2 SunRay 2FS DTUs and I have a vanilla PC setup with Solaris 10 U6 for x86. Installation was smooth except for the onboard NICs - I had to locate and manually install the appropriate drivers (skge). Installed SRSS 4.1, no problems, made a basic configuration (skge0: standard LAN, skge1: SunRay LAN with the standard 192.168.128.0/24 network). Installation told me DTUs would be firmware-upgraded after next power-cycle. Fired up the first DTU, it displayed the firmware upgrade OSDs and power-cycled - so far so good. But after the power cycle nothing happened - LED on the front is green so obviously POST is okay but the OSD constantly display status "1" (waiting for ethernet link to come up) and nothing else happens. Link lights on the NIC are on, when I send packets on the skge1 network (pings) they even flash, so I assume it's not the cables. Strangest things of all: I tried DTU 2 and the exact same sequence happened - so I am sitting here with 2 dead DTUs - any chance of reviving them? I scoured the 'net for information but I got no description that was even close to my problem...
Kind regards from Germany,
Henning

after installing sun ray server remember to:
1) utadm
2) utconfig
http://docs.sun.com/source/819-2383/config.html#59570 <- old but right

AC Adapter dead after firmware update

Just wondering if anyone else out there has had their AC adatpter fizzle out and die (with that wonderful electrical burning smell) immediately after updating to the lastest firmware?
I'd been using the Macbook for an hour or so with it plugged into a UPS battery backup (a bit of overkill I know, but I was really just using it as a powerboard at the time) then updated the firware and everything was fine...for about a minute then the power brick fizzled out and I noticed a flash of light through the cracks then it stopped working. The 'book is fine running off the battery, but that is only going to last another half an hour or so before running flat.
Hopefully it will be replaced straight away when I take it into the Apple store today - we'll seee

Quick update:
Apple store are replacing the dead power supply on Monday - hooray!
On Saturday the battery ran dry in record time - boo!
I have several files on the Macbook that my GF needs for her thesis that is due on Monday - sigh!

Digital camera dead after firmware download

Hi!
I downloaded firmware from OLYMPUS site (from link on Olympus Master 2 .app) to my digital camera FE220-X785.
As it reached the end of an (apparently successful) download, the camera went 'dead'. now nothing I can do will open it. Any attempt to connect camera to computer gets the message 'cannot detect camera'. The battery was and is fully charged and I followed instructions.
Another weird thing - maybe unconnected - is that when I restart my computer, the Olympus app starts up also. (I don't have it on my dock and I've checked all the preferences etc.)
The very clever advice from Olympus is that there is something wrong with my camera! (Where do they get these people from?)
Is there a way I can try to remedy this from files in my computer or has the download 'broken into' a circuit in the/a chip in the camera? Or something equally geekie?
I'm using this forum because iphoto (I have version 2) is the default app and till now works well and I wonder if there is any conflict with olympus app.
Any thoughts anyone?
Thanks
Gordon

Gordon,
Any attempt to connect camera to computer gets the message 'cannot detect camera'.
I assume this is true in iPhoto. Is this also the case in Image Capture? Does the System Profiler detect the camera as a USB connected device? In general, if the System Profiler can't see the camera, then there isn't much else you can do.
Another weird thing - maybe unconnected - is that when I restart my computer, the Olympus app starts up also. (I don't have it on my dock and I've checked all the preferences etc.)
Go to your System Preferences, click on Accounts, then select the Login Items tab. Is the Olympus app listed there? Another approach is to launch the Olympus app, then Right-click (control-click) its icon in the Dock. See if "Open at Login" is selected, and de-select it.
Is there a way I can try to remedy this from files in my computer or has the download 'broken into' a circuit in the/a chip in the camera? Or something equally geekie?
If you had the previous version of the firmware you could try downloading it back to your camera, to downgrade it. I don't know how, since you can't get the computer to acknowledge the camera. Olympus would have to help you there.
I'm using this forum because iphoto (I have version 2) is the default app and till now works well and I wonder if there is any conflict with olympus app.
Try placing the camera card into a USB media card reader. The card should mount on the Desktop as an external device so that you can save your photos to the Mac. You could do this via drag and drop in the Finder, using Image Capture, or using iPhoto. If there are no photos currently on the camera card, then use the camera to reformat the card before taking new photos. If the format of the card got corrupted, that can interfere with the camera being recognized by the computer.
If you upgrade your OS to Leopard, then you will no longer be able to run iPhoto 2.
Regards.

Nokia 5800 Screen Problems After Firmware Update V...

Hi all,
I have the Nokia 5800 navigation edition. I just updated the firmwareon it from V40. to the latest available 51.2.007. Doing so has turned the phone's screen into a huge mess - the lower half of the screen is all white and the upper half has some weired flickering and the icons(the ones that are visible) are all messed up too and some of them are not responding at all.
Heres what I've done to resolve the problem:
- remove the battery, memory and sim cards for a few hours.
- reboot the phone without the memory card(eliminating any corrupt setup files).
- reinstalled the V51.2.007 update several times using bothe the Ovi Suite and the older Nokia PC Suite updater.
- tried running the updates on all XP, Vista and Windows 7.
Can you please advise me of any other possible solutions I can try. Is there any way to revert back to the older firmware. The phone was working just fine before the update.
Thank you all for your help.

There is another way to hard reset your phone and it is as follows.
With your phone powered off, press and hold Green + Red + Camera Keys. Then power on phone using the on/off button whilst keeping the three keys depressed until you see the Nokia Shaking Hands Logo.
Always remember to backup your phone before performing resets as your data may be lost.
This reset will revert the phone to its out of the box state, so it will revert back to the original version of Maps that came with the phone. However, this should be an issue as you can easily redownload and reinstall the latest again.

Bluetooth dead after iOS4

After updating to iOS4 my bluetooth don't work any more? It can't find devices it use to find and vice versa. This i REALLY annoying? What to do?
Message was edited by: Bogru

New information: I performed a reset (holding power and home buttons) and now the bluetooth button have reappeared. It will let you switch bluetooth to the "on" position then it spins for a minute and goes back to "off".

Zen Nano PLus dead after firmware upd

I wanted to update the firmware of my Zen Nano PLus, so I got the correct file off the creative site. I connected my mp3-player and executed the firmware update file. Everything went as it should do. It brought up a pop-up window of windows asking to search for new Hardware. I accidently closed it. Then the whole firmware updating process stopped. I closed the window of the updating process and tried to restart the firmware update file. I didn't work because the player wasn't even found by the computer. The bad thing about it is, that I cant do anything with my player since the computer cant even talk to it. I cant turn my player on/off: it is pretty much dead. No connection to computer status diagram appears, nothing. I tried the rescue tool of creti've, it didn't find the player either.
Any Ideas what can help?

~PROBLEM SOLVED~
removed battery, pressed Start, connected USB, found as damaged, firmware update, works fine!!!

Zen Xtra - Totally Dead After Firmware Upd

Following a failed attempt to upgrade the firmware on my Zen Xtra 60gb, I have now spent many happy hours this weekend reading about the problems we are all having with this issue.
What happened to me was that I tried to upgrade under Vista but ended up with only the recovery mode. I tried to recover the firmware using a clean XP build and Media Player 0. During this update all went well until the final reboot, where the machine stopped and the update crashed.
The machine has not booted since this.
I have no recovery mode, reset doesn't work (with or without the battery), the PC doesn't detect the Zen Xtra and if you try to charge it there is no 'charging' indicator.
It is totally dead.
Has anyone recover their machine from this state?
I emailed the help desk who responded with -
"However, my sincere apologies as the warranty for your unit appears to
be over by now and there would not be any out of warranty
repair/replacements available for your unit.
May I suggest that you purchase a new unit, instead of having your unit
replaced/repaired at a cost (if available), as this would be a more
economical option"
Any help or ideas greatly appreciated.
Marc

~PROBLEM SOLVED~
removed battery, pressed Start, connected USB, found as damaged, firmware update, works fine!!!

Nokia 5800 XM: Problems after firmware upgrade

Hello all,
I upgraded my firmware to V 50.0.005, cause that's what Ovi store told me to do in order to download ovi maps.
However, now, when I open my internet browser it automatically opens full screen which is really not my preference. But when I click "options" it just shuts down.
Also when I enter Ovi store now, at first it seems fine but after loading an app page it crashes saying no more than "Something went wrong".
Thanks in advance for your help.

Hello, I'm afraid I don't have an anser to this, but I too appear to have the same problem. After upgrading to v 50.0.005 I get the following problems relating to web browsing. 1. If I attempt to download anything I get the following error :- Script alert: A critical internal service has failed. after which I click on OK and the browser/application shuts down (and the connection closes). This happens when web browsing e.g. when attempting to download a BBC podcast or using the Ovi Store application to download something. Also it happens whether I'm using my provider's 3G network or a wireless network. 2. If in the browser I click on "options" the browser shuts down. I admit that in order to get Ovi Maps I have previously debranded my phone in order to get the necessary firmware updates, but I haven't had this problem with any of the previous ones. FWIW the Ovi Maps application appears to work well and manage to keep the internet connection up for a long period when online. Does anyone else have this problem? Can anyone suggest anything or will we simply have to hape that the next firmware update comes quickly and cures the problem? Thanks in advance.

Mega Player 515 dead after firmware update

I've just updated my mega player 515 with the latest firmware V3.00.12.. everything seemed to be working until I selected the new "playlist"-item in the player-menu and it turns off.. whatever I do it wont turn on again, the computer cant recognize it anymore either.. what to do? please help!

Same thing just happened to my 515.
Updated to the new firmware (V3.00.12). All worked okay, I uploaded some music, played no problem, until I went into the playlist.
The thing just froze on the folders list. Can't turn it off and the PC won't recognise it.
Waiting for the battery to run down, now to see if that works.
Will let you know, but if anyone has any ideas .......

E66 unrepairable dead after firmware update

Hello.
I have (or better to say "had") a Nokia E66 and Nokia Software updater just completely and unrepairable (said by official service) destroyed my E66 few days after warranty ended.
It is unbelievable! I was successfully using it every day until the software update. Software Updater wrote that cell phone is disconnected and I must reconnect it. I have done it many times but every time it failed. So I took cell phone to official service and they told me that they cannot flash it and only way to repair it is to replace mainboard.
How is that possible? It worked very fine until software action! So I am supposed to throw my E66 to trash and buy another cell phone? Well, if yes, then not Nokia again. I want to own cell phone which is able to flash phone software without destroying whole phone!
Lucas

I have the same experience with my phone. Nokia invites to keep SW up-to-date; if you do it through OVI Suite, your phone may be destroyed. Therefore, Nokia should stop offering such service, or take responsibility for repair costs.

Bug in New Firmware V50.0.005 for Nokia 5800 Xpres...

Hi I am facing some bug in new Firmware V50.0.005
1) In the music library it is not showing any song.(i am having arround 500 songs in memory card)
2) If i try to refresy the library, it will not complete the process. (i.e. continuesly it will show refreshing and i have manuly stoped after 1 hour). and still no songs in all songs list.
3)While playing radio it will hang after some time.(After 15 min to half an hour). you have to restart your phone to close that radio application. (no other go)
If any Solution is there for this please let me know.
Thanks in advance
Ssandesh T S

For the radio problem, You may have to try to reinstall your firmware, or failing that, you may have to do a reset.
For the music library:
1. Connect your 5800 to you PC in Mass Storage Mode
2. On your PC you will need to have allowed to “Show” hidden files, do this from Explorer/Tools/ Folder Options/ View and select “Show hidden files and Folder”
3. Open your SD memory card/Removable Disk in My Computer on PC
4. Go to E:\ Private there you will see 3 folders 101f8857, 101ffca9 and 10281e17 .
5. Go to Private\101f8857\Cache\E there you will see .dat files. Delete all the .dat file BUT NOT the E Folder. Shown above right
6. Now go to Private\101ffca9 there you will see another .dat file, Delete the dat file NOT the folder.
7. Finally go to Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete mpxv2_2.db & mpxv2_2.db-journal for Mp3 files list and Delete pcv6_1.db & pcv6_1.db-journal for Podcast files list. Shown above right
8. Close all windows and disconnect your Phone. Go to Music Library and it should automatically start a refresh.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

5800 bluetooth dead after firmware v50

Similar Messages

Maybe you are looking for