5800 - Bug Report - Czech Republic is in CET (GMT+...

Hello Nokia,
Please take notice of the fact that the Czech Republic is in the Central European Timezone which means GMT+1. The phone software at the moment displays it as GMT+2 which is incorrect.
Firmware 20.0.0.12.
Thank you !

Indeed, Greenwich Mean Time simply refers to the time at the line of Longitude 0°, from which all world time is measured. It takes its name from the Greenwich Royal Observatory through which the line passes. Not all of the world observes daylight savings time, for example in my work I deal with a company in Malaysia which is on GMT+8 365 days per year, they never change time between summer and winter months.

Similar Messages

Bug Report: 5800 Contacts Ringtone bug

Hello,
I own a 5800 ExpressMusic and today I've upgraded my firmware version to latest. The problem I will explain still is not resolved.
The problem is re-producable and is very annoying. Follow these steps:
1- Change the ringing tone to some mp3
2- Edit a contact to have a name like ; )
3- Let that contact call you
The phone rings with the default tone (not the mp3 it was set to). The only way I found to correct it is to revert to more humanly names in contact list. This will be more annoying for people who save their friends with IM nicknames that contain lots of special characters.
PS: Is there any way I can bug report this to technical team right away?
Message Edited by bahadirozkurt on 14-Jan-2010 12:18 AM
Message Edited by bahadirozkurt on 14-Jan-2010 12:19 AM

Try to reset the phone, *#7370# before you proceed backup your contacts and apps.
Al Gore didn't invented the Internet.
If you spell Chuck Norris in Scrabble, You win Forever!

X121e laptop start selling in Czech Republic?

Hello,
I was wondering if/when will the X121e laptop start selling in Czech Republic? All reports indicated that it is supposed to be sold all across Europe and so far it seems like we are one of the few where it doesn't sell.
Also related, if I were to order the laptop from Germany, will it have non-QWERTZ/Y layout?
Thanks in advance.
Moderator Note: Edited subject to match content.

Check with local operators or online stores that ship to your country.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Bug report follow-up

is there a way to follow-up on a bug report that i submitted? i have the bug number, but would like to see if the report was understood, filled out properly and determine the status of the bug report.
thanks,
doug

They comment on bugs if actions were taken. Otherwise - don't expect any feedback.

Solaris8 and 9 (possibly 7) /dev/poll driver bug report.

Hello,
I'd like to report a bug in the solaris 8 and 9 /dev/poll driver (poll(7d)).
As i do not have a support account with sun or anything like that, there
seems to be no other way to do that here (which is of course a very sad
thing).
Bug details:
The /dev/poll device provides an ioctl-request (DP_ISPOLLED) for checking
if a particular filedescriptor is currently in the set of monitored
filedescriptors for that particular /dev/poll fd set (open /dev/poll fd).
A quote from the documentation of the poll(7d) manual page taken from
Solaris9:
"DP_ISPOLLED ioctl allows you to query if a file descriptor is already in
the monitored set represented by fd. The fd field of the pollfd structure
indicates the file descriptor of interest. The DP_ISPOLLED ioctl returns 1
if the file descriptor is in the set. The events field contains the
currently polled events. The revents field contains 0. The ioctl returns 0
if the file descriptor is not in the set. The pollfd structure pointed by
pfd is not modified. The ioctl returns a -1 if the call fails."
It says that when you query for an filedescriptor which is currently being
monitored in the set, that it would return 1, and change the events field of
the pollfd structure to the events it's currently monitoring that fd for.
The revents field would be set to zero.
However the only thing which actually happens here, is that FD_ISPOLLED
returns 1 when the fd is in the set and 0 if not. When the fd is in the
set, when FD_ISPOLLED returns 1, the events field remains unmodified, but
the revents field gets changed.
A small sample code to illustrate:
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/devpoll.h>
main() {
struct pollfd a;
int dp_fd = open("/dev/poll", O_WRONLY);
a.fd = 0; /* stdin */
a.events = POLLIN; /* we monitor for readability, POLLIN=1 */
a.revents = 0;
write(dp_fd, &a, sizeof(a));
a.fd = 0;
a.events = 34; /* filled in with bogus number to show malfunctioning */
a.revents = 0;
printf("DP_ISPOLLED returns: %d\n", ioctl(dp_fd, DP_ISPOLLED, &a));
printf("a.fd=%d, a.events=%hd, a.revents=%hd\n", a.fd, a.events,
a.revents);
According to the documentation of /dev/poll and namely DP_ISPOLLED this
program is supposed to print the following:
DP_ISPOLLED returns: 1
a.fd=0, a.events=1, a.revents=0
However it prints the following:
DP_ISPOLLED returns: 1
a.fd=0, a.events=34, a.revents=1
You can take any number instead of '34' and it will simply remain untouched
after the DP_ISPOLLED ioctl-request.
I hope it's clear now that the solaris8 and solaris9 (and probably solaris7
with /dev/poll patch too) DP_ISPOLLED implementation is broken.
This bug is also easily illustrated by looking at the solaris8 kernel sourcecode:
<snippet osnet_volume/usr/src/uts/common/io/devpoll.c:dpioctl()>
case DP_ISPOLLED:
pollfd_t pollfd;
polldat_t *pdp;
if (pollfd.fd < 0) {
mutex_exit(&pcp->pc_lock);
break;
pdp = pcache_lookup_fd(pcp, pollfd.fd);
if ((pdp != NULL) && (pdp->pd_fd == pollfd.fd) &&
(pdp->pd_fp != NULL)) {
pollfd.revents = pdp->pd_events;
if (copyout(&pollfd, (caddr_t)arg,
sizeof(pollfd_t))) {
mutex_exit(&pcp->pc_lock);
DP_REFRELE(dpep);
return (set_errno(EFAULT));
*rvalp = 1;
</snippet>
its' clearly visible that the code writes the current monitored events to
the revents field:
'pollfd.revents = pdp->pd_events;'
and that it doesnt set revents to zero.
It's funny to see that this has been like this since Solaris8 (possibly 7). That means nobody ever used DP_ISPOLLED that way or people were simply to lazy to file a bug report.
Another funny thing related to this. is that Hewlett-Packard did seem to know about this. Since HP-UX11i version 1.6 they also support /dev/poll. From their manual page i ll quote some sentences from their WARNING session:
"The ioctl(DP_ISPOLLED) system call also returns its result in the revents member of the pollfd structure, in order to be compatible with the implementation of the /dev/poll driver by some other vendors."
Hopefully this will get fixed.
I also like to reexpress my very negative feelings towards the fact that you're not able to file bug reports when you do not have a support contract. Ridiculous.
Thanks,
bighawk

Have I mentioned how much i love my playbook now Great job on os 2.0

HT2534 I am from the U.S, now currently in the Czech Republic. Just bought an iphone with vodafone. I can't get past the account setting on itunes, etc...either way, How do I get ENGLISH SPEAKING HELP instead of being redirected to the Czech Language stor

I am somewhat new to apple products. I am from the U.S. and currently studying in the Czech Republic.
I have an itouch with an apple ID, but lately I can't get it to charge or work. After pluggin the usb recharge cable to the computer at my universities facility, it gives a black page with a picture of the cable and the arrow pointing to itunes logo. The school's computer labs don't have i tunes or anything like that.
I also just got an iphone 4S and have been trying to set up and i can't seem to complete the process for the itunes so i can install the apps i had in the itouch and also to get new apps. It stops me and says to contact the itunes for support right after the input of address and phone number information, etc...
The purchase was made in the czech republic from a vodafone store, but if i remember right i configured it to US settings so I don't have to deal so much with everything showing up in Czech.
I tried getting help by going to the support, but after putting in my name, email, phone number for scheduling a call with them it rejects the phone number because i am putting in my czech phone number. Putting in my previous US number would be useless because I am not in the US and that number is probably inactive.
I would to get some English speaking support while being here in the czech republic.
Any advice?
-peteMD-

If you are completely confident that you didn't hide it, then you purchased those with different apple id. If you completely confident that you purchases with same apple id then you have hidden it. One of the other or you are speaking about a miracle. While miracles are possible they are not very likely. Remember
Occam's razor?

Did you know that Google toolbar doesn't work properly in FF rc1? I have filed a bug report to Google about this

The Google toolbar doesn't recognize a left mouse click when selecting a 'suggestion'. It's OK using the keyboard, however. I have filed a bug report with Google, but as this is an important extension thought you should know.

See also: http://forums.adobe.com/message/4662367#4662367
-Noel

Bug Report: The keyboard focus doesn't automatical...

Bug Report: When a conversation window opens, the focus doesn't automatically land in the chat entry text field.
Since the new interface for Skype was introduced officially in Skype 7.0, there is a bug with the system/keyboard focus for a new conversation window. When Skype is in "Split Window View" and each new conversation automatically pops up in a separate window, the system/keyboard focus doesn't land in the chat entry edit field. Instead, the user has to press Shift+TAB a couple of times, to move it there and reply to the chat message received. This especially problematic for screen reader users, who rely on keyboard navigation. This mainly occurs when a new conversation is started with an incoming message, but it sometimes occurs when moving the focus out of that conversation window and later back in it again (while it is still opened).
Steps to reproduce it:
1. From "View" menu, activate the "Split Window View", if it is not already enabled.
2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
4. Activate the "Save" button, to save the changes.
5. Close all windows, related to Skype. You may keep only the main window opened.
6. Tell someone to send you a chat message. When the message arrives, Move the system focus to the conversation window in question, preferably with Alt+TAB. The system/keyboard will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should by default, but in some unknown place in the window.
7. Move the system/keyboard focus in the chat entry edit field and keep it there.
8. Switch to another window, preferably from another application.
9. With Alt+TAB, switch back to the window of the opened Skype conversation. There is a chance that the system/keyboard focus will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should do by default, but again in some unknown place in the conversation window. But that is harder to reproduce.
Test environment:
- Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
- Skype version: 7.0.0.102 for Desktop.

This is a known problem, but Skype have not given us an estimated time for a fix.
Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design

Bug report: Naming a Bin after creating it with drag'n'drop

There seems to be a small bug when giving a newly created bin a name after creating it by drag'n'drop of several clips onto the "New Bin" icon.
To reproduce:
Select some clips in your project browser
Drag them onto the New Bin button
A new bin is created with the clips in it
- the bin name for it appears to be selected, and editable - just as if you had created a new empty bin by clicking the New Bin button
- type in a new name - it accepts the name fine, now press enter.
- your new name disappears, and *now* you are really in the mode to edit the bin name
- type your name again, and it works.
Work around:
When creating new bins by using drag'n'drop of clips onto the New Bin button, first press enter once to enter into the proper edit mode before giving the bin a new name.
(is there a better place to file bug reports?)
Version 6.0.1 (014 (MC: 264587))
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MP51.007F.B03
SMC Version (system):          1.39f11
SMC Version (processor tray):          1.39f11
OS X 10.6.8

Er, just answered my question about bug reports by reading the "read this before posting" link above
But I'll leave this here for the work-around in case anyone else needs it.

Bug report: 3.2; DAC; GridControl; Navigation - Invalid reaction to mouse drag

Hi,
This is a bug report, I think.
I have a one-column GridControl with mandatory column. Normally, DAC framework prohibits from navigation out of empty field and emits one of those DAC-1002 or DAC-603 errors. The only exception I noticed was a double-click on another row. In this case navigation allowed but an error is still produced.
Today I was playing with this GridControl and discovered that I can drag the yellow frame across rows. And here comes a bug - GridControl doesn't change the current row on InfoBus according to current selection marked by yellow frame.
In my case it brings the following problem: if the cursor is placed on the new empty row, user drags the cursor to another row and then tries to use any other navigation means except dragging, he gets a navigation error. DAC framework still thinks that the current row is the empty one and produces an error telling that the attribute cannot be empty.
Dev Team, any comments?
Regards,
Vladimir

Hmm... Nobody answers. I'll try another variation of the same question.
DAC framework implicitly validates attributes on the base of Mandatory constraint in the Entity Object definition. Is it possible to set the level of this validation? For example, I want to conduct validation only when user navigates out of the row or the whole rowset, but not when he just leaves a field.
Regards,
Vladimir

Bug report: vpn (ipsec) interface number in snmp always change

Hi,
this is a bug report for RV082 hardware version 3 and 4, firmware version 1.x, 2.x and 4.x (all latest versions). I hope someone from cisco/belkin reads it.
Summary:
The snmp interface number of a VPN Tunnel change when the VPN tunnel disconnect and then re-connects.
What should happend:
The VPN Tunnel number 1, should always have the same snmp interface number. In RV082 v4, this number should always be 10. For example, the LAN, WAN1 and WAN2 always have the same snmp interface number.
What is the problem:
The VPN Tunnel number 1 change the snmp interface number, from 10, to 11, to 12, etc.
How to reproduce:
create a VPN Tunnel using 2 RV082 or 1 RV082 and 1 RV042. Once the VPN Tunnel is connected write down the snmp interface number. A few days later, disconnect the cable of block internet access. Then restore the internet conection and write down the snmp interface number, you should note that the snmp interface number have changed.
Tools used:
PRTG Network Monitor
Please take a look at the attached image, note all the "ppp" interfaces, theres only 1 VPN Tunnel (gateway-to-gateway) defined.

Hi Tom,
many thanks for your reply.
I see that I have to call Tech-support, in order to report a very technical situation, explaining them this is a bug report and I want them to make a better product.
Since I won't pay a dime for this problem to be fixed, I can only see pain in this path(calling to speak with a tech support representative).
I also readed that Belkin has bought Linksys, so I don't know if the RV082 will remain with Cisco or will go with Belkin.
So, my only hope is to document this bug, that is pressent inall firmware version and hardware version of the RV082 as of today.
many thanks for your help,
regards,
Oliver

Bug Report: Shortcuts for Adjustments in 3.1

I have verified that bug with a brand new test account (Aperture 3.1 and OS 10.6.4 with latest Pro Update):
- Make an adjustment to an NEF-file
- save that adjustment as a preset
- assign a keyboard shortcut to that specific adjustment
Switch to the next NEF-file and make your usual adjustments:
- initiate that shortcut to apply the already saved preset/adjustment
All of a sudden, all already applied adjustments are set back to defaults!!!!
To sum up:
Shortcuts are presently not useable!
Bug Report was filed!
Any observations???

I got it myself. My shortcut combination contained the option key. That causes AP to replace any adjustments already made to the image. You have to use a keyboard short cut combination without the option key.
The question is, why AP 3.1 is not smart enough to refuse such a combination??? In version 3.0.x everything worked fine!!!

[Bug Report] Rhythmbox missing depedency for "tdb"

Here's the bug report:
https://bugs.archlinux.org/task/29310
Just tryed to install Rhythmbox and had to track down that depedency. Just figured I'd post it here to try to give it some more attention. Seems like a pretty easy fix that could save some users some frustration. Go give it a vote on the bug report so the developers will see this.

For Oracle TopLink customers can report bugs using a support request on metalink.oracle.com.
For TopLink Essentials customer can directly file bugs in the GlassFish system.
Doug

Bug Report: Feature Request/Bug Report Form

Re: Feature Request/Bug Report Form
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
The Feature Request/Bug Report Form does not include a drop-down option for Creative Cloud.

Hi Stephen,
We are collecting feature requests as idea threads here on the forums versus using that form. If you believe you have discovered a bug with Creative Cloud please post about it here on the forums.
Thanks,
-Dave

Bug report submitted re Input Mode affected by ACR 4.2 Mac - very annoying

Just submitted a bug report to Adobe. ACR 4.2, Photoshop 10, Tiger 10.4.10, PowerPC.
Most users in the US and the UK may not even run across this situation.
If you use a non US standard keyboard layout as your Input mode, causing ACR 4.2 to launch, either from Bridge, Photoshop, or the Finder, this switches the selected keyboard to the US standard. If you click the Cancel button in ACR, the keyboard reverts back to your custom keyboard layout; but if you click Open, the US standard keyboard remains set even after quitting Photoshop, ACR and Bridge.
It took me a while to figure out what was causing me to loose my preferred keyboard layout. It didn't dawn on me ACR 4.2 was doing it. Observing a few screen shots led me to discover the cause.
It's most annoying.

The choices in Bridge > Preferences > Advanced > International > Keyboard are limited, and they do not allow for choosing custom keyboard layouts.
I need the custom keyboard layouts for a variety of reasons, such as being able to type in seven languages with my most used one without switching, two Russian layouts to allow for two non-standard ways of encoding Russian fonts, etc.

5800 - Bug Report - Czech Republic is in CET (GMT+...

Similar Messages

Maybe you are looking for