5800 chimes 3 minutes before the hour but not ever...

Please help good people. I have had the 5800 for a couple of weeks now and lovely phone that it is, one thing is driving me crazy! For no apparent reason it will chime once three minutes to the hour, but not every hour. It can be during the day, during the night, whenever it apparently feels like it, but always at three minutes to the hour. Any help to stop this would be greatly appreciated.

I have the exact same problem, and it is really driving me crazy...
Any luck with it??

Similar Messages

  • Macbook Pro BIOS requires at least 1 minute before the Apple logo appears and Chime sounds.

    When I cold-boot my MacBook Pro, it takes a least 1 minute before I get the chime and Apple logo.
    Some background on the problem:
    After purchase I almost immediately installed Windows 7 on BootCamp and had no problems.
    Around 8 months ago I bought a SSD drive and CD-bay kit, put the original HD into the CD bay and the SSD in place of the original HD, installed OSX on the SSD and formatted the original OSX partition, this broke the Windows install.
    I tried in vain for around 2 months to repair the Windows partition without having to reinstall it to no avail, so I swapped the positions of the drives.
    Since then the Windows & OSX partitions work fine, however from a cold boot it takes upwards of 1 minute before the Apple logo appears and Chime sounds, after that it behaves as expected (maybe 20-30 seconds and I'm fully booted).
    Performing a soft restart behaves as expected too (Chime/Logo appear almost immediately and boot time is lightening fast!).
    When I close the lid, it exhibits a similar problem in that it takes about 1 minute before it has gone to sleep and I can't do anything to wake it until that time has past.
    It's not the end of the world, but it is slightly annoying, so any help would be greatly appreciated.
    My guess is some kind of EFI/BIOS problem, but I can't find any other examples of this problem and have no idea how I might fix.

    When in OS X go into System Preferences and Select Startup Disk. Then select the OS X entry, even though you are in OS X, and reboot.
    Some times the hardware gets confused as to which OS to boot and figuring it out can take some time. Once you select the OS X partition as the OS to boot to it should startup faster.
    If not then you have some other problem that I am not familiar with.
    You might also want to do a SMC reset, Google for the instructions found on the Apple KB site.

  • Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

    Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

    Hello,
    I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
    THAT was not an option!
    BUT it seems to solve my problem in the following way after trying a lot of possibilties:
    In the menue properties/help (don't know the exact english word, because I run my phone in german)
    I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
    Today the flash feature was responding to different push notes very slowly.
    By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
    We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
    the problem appeared. Switching the LED-flash off: problem disappeared!
    It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
    treated my phone very hard today to double check, but its still ok.
    @Apple:
    Please fix that issue in the next update.
    Hope, this helps you guys as well.

  • TS1702 I bought a song today from iTunes but it cuts off over a minute before the song ends, how can I download it again?

    I bought a song today on iTunes and it cuts off over a minute before the song ends, how can I download it again or fix the problem. It happens on my MacBook Pro and my iPod Touch 4G

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the track from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link.

  • My film has not totally downloaded, I did not realise this until it stopped 15 minutes before the end, how do I know when the rented film I have purchased has been fully downloaded. Can I retrieve anyhow

    My film I rented has not fully downloaded I only realised that when it stopped 15 minutes before the end , how do I know when a film has been fully downloaded. Oi would not have thought the film would not have started unless the film was fully downloaded. The film warned me prior to tarting that I only had 48 hours to watch once starting!

    I'm sorry but this is too funny to pass up. 

  • In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel.  I can boot up and use for about 5 minutes before the mouse freezes.  I believe something is   overheating.  What would that be - so I can have repairs done?  The

    In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel.  I can boot up and use for about 5 minutes before the mouse freezes.  I believe something is
    overheating.  What would that be - so I can have repairs done?  The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
    <Edited By Host>

    Hello USME,
    'Tis a common problem on old Macs.
    Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
    Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
    Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
    Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through  the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
    Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
    A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire  working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
    In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
    Good luck!... Jon

  • Can edit event title, day, and hour, but *not* minutes - Help!

    I can edit everything about my calendar event title, day, and hour, but not the minutes. This is very annoying and I'm not able to have accurate calendar entries.
    It's like there' s a glitch in the program. Can it be reloaded/rebooted?
    Using iCal 3.0.8

    I have the exact same problem, and it is really driving me crazy...
    Any luck with it??

  • I clicked erase content and setting before 12 hours but it is not processing till ie not completed till what can i do

    i clicked erase content and setting before 12 hours but it is not processing till ie not completed till what can i do

    On a 4S the erase should take under 10 seconds. As it has taken longer there must have been data corruption on the phone. Reboot it by holding HOME and SLEEP until an Apple logo appears. If it has not be cleared of all data connect it to iTunes and Restore it. Then erase again.

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • I rented a movie on iTunes and, really annoyingly, it has stopped 30 minutes before the end. Any suggestions? And how do I go about getting a refund?

    I rented a movie on iTunes and, really annoyingly, it has stopped 30 minutes before the end. Any suggestions? And how do I go about getting a refund? Thanks so much for any suggestions.

    Hi alefiya,
    Welcome to the Support Communities!  It sounds like the movie didn't completely download. This link will get you in contact with the iTunes Support Team.  They will be able to review your account with you:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    - Judy

  • HT201274 i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

    i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

    nabidhadi wrote:
    .its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
    You iPod has been jail broken.  Unfortunately you are on your own here. I can offer that you need to find out which method and software was used to JB.
    Good luck...you're gonna need it....

  • Hi i am putting photos in my project it will play the videos but not the photos never had a problem before

    hi i am putting photos in my project it will play the videos but not the photos i have not had a problem with this before

    If you haven't tried re syncing the apps using iTunes..
    Connect the iPad to your computer. Select it under Devices left side of the iTunes window. Select Apps from the menu, make sure the boxes next to those apps are selected then click the Sync button bottom right side of the iTunes window.

  • How can I turn off the monitor but not the computer on my touchsmart 310..

    I leave my computer on at night to keep wireless network going, but I want to turn off just the monitor. All of the advice I've seen is to turn off the touchscreen feature -not the monitor itself. Thank you.

    You can set the timing for the display to turn off.
    Try this:
    Click:
    Start.
    Control Panel.
    Hardware and Sound.
    Power Options.
    On the left bar you'll find Choose when to turn off the display. 
    At Turn off the display:  there is a drop dowm menu to choose the number of minutes before the display turns off.  Make your selection.
    Try that and see if it works for you.
    I hope this is what you were looking for,
    GeorgeFN
    GeorgeFN
    I work on behalf of HP.

  • I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my Mac computer and still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help?

    I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."

    Lmwilliamson wrote:
    Kernel panics:
    After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists. 
    I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
    I am able to use my computer in Safeboot mode (only)
    Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
    If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
    If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
    Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
    ..Step by Step to fix your Mac
    Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about.

  • HT1386 I am unable to get a two way calendar sync with my iPhone 4s and my mac's ical.  iTunes syncs my mac's calendar to the phone, but not the other way.  I do not use iCloud and I cannot find any menu for removing sync history as described by others.

    I have spent 3 hours trying to get my ical updated on my mac with events added to my iphone calendar. Itunes will sync the calendars from the mac to the phone, but not vice versa.  I have read every post which relates to this problem, but I do not use iCloud, there is no iSync app on my mac, and there is no menu to delete sync history under system preferences.  My mac is fairly new and is running Mac OS X 10.7.4.   I tried to delete the iphone from itunes and start over, but can't even do that.   Now what?  Any advice short of throwing both devices out the window?

    For resetting the sync history on a Mac running Lion - 10.7.x if needed.
    http://support.apple.com/kb/TS1627
    If you see the Sync menu in the menu bar, skip to step 3: 
    If you do not see the Sync menu in your menu bar, skip to step 7.
    Hold the Option key on your keyboard, then click the Sync menu in the menu bar:   
    if you see the Sync menu but you are unable to open it, skip to step 8.
    Choose Reset Sync Services.
    Click Reset Sync History.
    Test for the original issue. If the issue persists, or if you are unable to open the Sync menu, follow these steps:
    In the Finder, choose Utilities from the Go menu.
    Open Terminal.
    In the Terminal window, type or paste the following command on a single line:
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full
    Press Return.
    Quit Terminal after the operation has completed (when Terminal returns to the command prompt with a $).

Maybe you are looking for

  • K9n platinum voltage question

    Hello everyone,  I'm new to the boards and I hope someone can help me out. Let me throw my specs out first: mobo: msi k9n platinum 1.0 (bios 1.5)  (ms-7250-20) cpu:   opteron 1212  (voltage should be 1.3/1.35) ram:   ocz 6400 platinum (5,5,5,15 2t) (

  • What's wrong with my laptop? It keeps loading and turning off

    My laptop suddenly shut off while I was using I for almost the whole day (which I usually do every day). It felt hot so I had it turned off for 2 hours. I tried to turn it on again but it loads for a while, and then shuts off. I had it rest for almos

  • My game keeps crashing on startup

    Every time i try to open the game, it crashes on startup :( Event log:  System Provider [ Name] Application Error EventID 1000 [ Qualifiers] 0 Level 2 Task 100 Keywords 0x80000000000000 TimeCreated [ SystemTime] 2014-09-29T14:02:43.000000000Z EventRe

  • What is best way dealing with large tiff file in OSX Lion?

    I'm working with large tiff  file (engineering drawing), but preview couldnt handle (unresponsive) this situation. What is best way dealing with large tiff file in OSX Lion? (Viewing only or simple editing) Thx, 54n9471

  • 2010 Tax Forms print errors in Reader

    All of the tax forms I've downloaded from the IRS web site print with errors --- lines, garbage characters, etc when printing from Reader (latest version) on OSX.  If I open the .pdf files with Photoshop and print them, they come out just fine.  Prin