5800 does not retain date&time stamp for SMS trans...

I just got a new 5800XM a week ago. I upgraded from a Samsung SGH-C260. When I tried to copy the SMS messages off my SIM and on to the Nokia, all the date and time information of the original messages was lost. I tried the SIM in a new Samsung Star and it was able to read the date and time information without trouble, so obviously the information is there and readable.
Does anyone know of a way to successfully transfer these SMS messages without losing the date and time information?
Thanks!

Paresh - my understanding of the original post is that when she does show startup-config that no date is there. There is an explanation for this.
Narayan - the service timestamps is a good command and I agree that specifying datetime is better than the default of displaying uptime. But this command does not have anything to do with the date in the config file.
What does control the presence (or absence in this case) is whether the router has authoritative time at the time the config was changed or saved. The router can have authoritative time by use of the clock set command or by use of NTP. I believe that NTP is a much better solution.
So if the router really knows correct time it will put the time stamp into the config. And if the router does not know correct time it will supress the time stamp. From the fact that the startup config does not have a time stamp we can believe that the router did not know authoritative time when the config was saved. And I do not know any good way to go back and discover it.
HTH
Rick

Similar Messages

HT2513 Is there a way to see who made an appointment and at what time/on what date they made it? Kind of like a date/time stamp for our network calendar?

Is there a way to see who made an appointment and what time/on what date they made it? Kind of like a date/time stamp for our network version of iCal? Everyone has all rights and privledges to everyone else's calendar, and sometimes we need to know who did what to whose.

Christine,
You can also ask in the Typography forum,
http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
The guy running whatfontis is a regular poster there.
And apart from
http://www.whatfontis.com/
there are
http://www.identifont.com/
http://new.myfonts.com/WhatTheFont/
and especially for script,
http://www.bowfinprintworks.com/ScriptIDGuide.html

PTP camera - how to retain date/time stamp on photos [Gnome]

I have a USB PTP Camera that comes up in Nautilus under "gphoto2://[usb:001,007]/DCIM" I can copy/paste the photos off the thing to ~ but the date/time stamp gets changed to the present. How can I copy them over retaining the original date/time stamp?

By using the exif info I suppose.
http://linux.die.net/man/1/exiv2
-t
Set the file timestamp according to the Exif create timestamp in addition to renaming the file (overrides -k). This option is only used with the 'rename' action.
Last edited by karol (2010-07-22 22:13:26)

Retaining date/time stamp when copying files from a backup network drive

How do I retain the date/time stamp when copying files from a backup such as a external drive or a network drive?

i don't trust MA at all. known to create a lot of problems.
instead, see the green box in this user tip.

Sign in for two weeks but it does not retain this time

PRINTERS: HPENVY110 SERIES AND HP C310A
I had a few automatic updates to my computers and it would seem that since then I have not
been able to sign in Eprint for two weeks - I tick the box but that does not work. I so need the E print
and I am lost without it - can anyone help.

Hi smudden, did the software update on your computer include an update to your browser e.g. IE8 updated to IE9? If so you could try reverting back to the previous browser version to see if that is the issue.
However be aware that you don't have to be signed in to your ePrintCenter account to send emails to an ePrint printer
Hope this helps.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Alternate data stream (ADS) removal does not update file time stamp.

Hello,
I am using standard CL program stream.exe to operate ads on file.
If I add ADS to file, file data\time will be changed.
F:\>dir
07/23/2014 06:43 PM            32,768 test.txt
F:\>stream cr test.txt:0 important_info
SUCCESSFUL: tf1.txt:0 is created.
RC = 0
F:\>dir
07/30/2014 07:11 PM            32,768 tf1.txt
If I remove ADS from file, file data\time will be unchanged.
F:\>dir
07/30/2014 07:11 PM            32,768 tf1.txt
F:\>stream de tf1.txt:0
SUCCESSFUL: tf1.txt:0 is deleted.
RC = 0
F:\>dir
07/30/2014 07:11 PM            32,768 tf1.txt
Is it a normal behavior? I suspect a defect in stream.exe.

Hi,
This depends on that if the stream.exe contains the related code like SetFileTime when play the deleting action.
SetFileTime function
http://msdn.microsoft.com/en-us/library/windows/desktop/ms724933(v=vs.85).aspx
So we may need your resource code about de of stream.exe to determine the issue.
Kate Li
TechNet Community Support

Basic Function Generator does not return current time stamp

The Basic Function Generator .VI file does not return the current time stamp.Instead it counts from 1904.
Is there a solution to this so that the basic function generator returns a current time stamp?

"Is there a solution to this" ... yes, if you expand that to include "workarounds":
Attachments:
Example_VI.png ‏5 KB

List View does not retain date formats from Excel

i am using List View control to isplay data. When i scroll the horizontal bar inlist view, the date format changes to numbers. is there were to stop this happening.
regards
Chandra

Hi Chandra,
Are you getting the values from any live connection or is it static data from the excel file?
You can also try to goto properties of component and in the appearence tab,select the format of the values as "DATE".
Incase you are getting the values from the live connection, you can select a different cell which would reference to the data coming from the connection and use it into the components.
e.g.: if values are coming in cell"A1" then goto some empty cell as B1 and type in"=A1" and use this new cell into the component.
Let me know if this works.
Thanks,
Amit.

Retaining AVI date/time stamp during capture to pre 9.

I have pre 9. When capturing DV from my camcorder, how do I get pre 9 to add the clips time and date to the avi file properties like it does for jpg's. What I get is the date I captured it to the computer. If I add "date taken" to the properties shown, it remains blank.
I realize the time/frame stamp changes throughout the clip but it should be able to show the initial date/time stamp, for example. I sort these travel clips by oldest date first and need to be able to match them to their itinerary locations. I have a small freeware app that will strip the date/time stamp from the meta data and then I can adjust the time/date in "Organizer" but I have 100's of clips so I'd rather not go that way. I know there app's that will encode the date/time stamp visibly on the image during capture but I don't want that as I make DVD's from the clips. Do you have any advice or suggestions? I have Win 7, 64 bit, 3.2 ghz, 2 core. Thanks, Rob.

Premiere Elements won't do this.
You'll need a third-party program called DV Date, downloadable from the web.

Date and Time stamp for the archives

Hi,
I'm trying to set up a date/time stamp field for a Documaker archive.
I've added a TIME_STAMP field in my APPIDX.DFD and I populate the field using a DAL script, invoked by a PreTransDAL line in my AFGJOB file. That works fine but, the DAL script being invoked for every transaction, it adds to the processing time.
I do not need an exact date/time stamp for each transaction in the batch, I could use the same one for all the transactions. That would require the TIME_STAMP global variable to be populated once, at the job level, at the beginning of each batch.
Any suggestions?
Thanks.

Hi Gaetan,
Try using a BatchBannerBeginScript to populate a GVM with the date/time, and then reference this GVM in your APPIDX.DFD. In this manner the value will be updated at the start of processing for each batch rather than each transaction. Or, consider the possibility of adding the transaction date/time into the extract data and then sourcing from that point. Either should work. In my experience most customers prefer that the archive date/time come from the system of record rather than the time the transaction was archived -- unless of course the customer actually wants to record the time the transaction was archived, in which case the method I've described above should work.
Enjoy!
Andy

Adding a Date/Time stamp to videos already created

We have someone using Elemets 8
They need to add in the date/time stamp to video's that are already created.
The camcorder we have does record this information but doesn't allow that information to be put onto the screen its a Canon HD HF200
We were told by Adobe support we can do this but they wanted $39 plus $39 an hour.
Anyone out there able to tell me how we can get this done for free

PrE lacks the TimeCode Effect (unless it has been added in PrE 10?), that both PrPro and Adobe After Effects has. However, even that Effect does not do date/time, just Runtime TimeCode, but with some display alternatives.
There are two programs called DVDate. One is/was freeware, and the other was inexpensive shareware. I do not have the two links handy, but believe that either will do what the user wishes.
I know that in the past, one valued contributor, Neale, has posted the links, and has also given the details of what each of the programs can, and cannot do. Maybe he'll drop by this thread, and fill in the blanks that I am leaving here.
Good luck,
Hunt

Formatted Search - Date Time Stamps

Hi,
We are trying to use a Date & Time Stamp for two udf's of which I will then calculate the difference in a report. I have a couple of issues. Ideally the user would enter the Start field (udf1), click Shift-F2 and that udf would be populated with a Date/Time Stamp like: 07/12/09 14:30:00 or 07/12/09 02:30PM. The user would also do the same thing for the End field (udf), so I end up with two udf's that both hold a Date/Time Stamp described above.
1 - It looks like I will either need two udf's each for both stamps, one for the Date (date field type) and one for the Time (hour field type)...or I will need to use an alphanumeric field type to hold the whole timestamp. When using the hour field type I still have some issues.
and
2 - I can't seem to get the right sql (sbo query) function to return the date/time stamp and / or I can't cast it or format it the way I would like.
-If the udf is date field, I can use the GetDate function, but it doesn't seem to get the time with it or the field isn't big enough or formatted properly.
-If the udf is an alphanumeric field, I cast the GetDate function as nvarchar and it returns the date/time stamp, but it is an alpha field and the date is Jul 21 2009 4:41PM. I don't like the Jul 21 2009 formatting
-If I use two fields, one for date (date type) and one for time (hours type), the date is formatted the way I like, but the hours field doesn't display the AM or PM and my formatted search doesn't return military time (14:00 instead of 2:00PM), so I can't tell if 2:00 is morning or afternoon.
So I guess my questions are pretty general...Am I using the correct field types? Any suggestions on what to use? Are there any other ways to format this data? Not all date functions or casts (time, smalldatetime) work in the sbo query so I am looking for options. Any suggestions on what functions or cast to use?
Thanks

Hi,
As you already aware, within B1 you may not treat datetime field easily. For one of your request: I don't like the Jul 21 2009 formatting. You could use function such as
Select CONVERT(nvarchar(30), GETDATE(),106)
to change it to 21 Jul 2009.
Thanks,
Gordon

JDev 11.2.1 Commit button does not save data

I am using JDeveloper 11.1.2. I am having trouble saving updates to the database. I am trying to create an application that displays database records in a form, allows the user to modify data in the form and them saves that data to the database. I have successfully created the database, entity objects, view objects and application module. I created the form on the page by dragging the data control on to the page. I used the same method to create a table from the same data control. I included a submit button on the form. I dragged the create, delete and commit buttons onto the form. This application gets the data from the database, the user modifies it, select the submit button. This displays the change in the table. I can do the same with create and delete. However, I use the commit button to write the data to the database but it never happens. I have set up logging with –Djbo.debugoutput=console. I can see that the delete button {#bindings.Commit1.execute} is doing something but no change is made to the database.
Thanks for your help, Steve

I have had some success. I tested with the BC browser in my application and got the same results, no update. So I created a new application. I used the 'Create Business Components from Tables' option to create a set of Entity objects, Entity View objects, and Query View objects. The interesting thing I found was that when running the BC browser and trying to update the database using an Entity View object I had success. Was able to add and modify records and results saved in db. However, when I use the browser and try to do the same thing using a Query View object I get the behavior I've been seeing all along, it looks like it is working but not data saved to the database. In order to make the Query View object updatable in the browser I had to make all of its attributes updatable 'Always'. this made the view look updatable in the browser but no save. In my real application I did not have any Entity View objects. the Query View objects look the same so I didn't create any Entity View objects. So I want back to my real application, removed all Entity objects and Query View objects, recreated them with the 'Create Business Components from Tables' option. I created Entity View objects this time. When I drat a data control based on an Entity View onto my page I can make updates and the commit works.
I'd like to understand the difference between the Entity View objects and the Query View objects. Once they have been created I have a hard time telling them apart. The Entity View object for the Employee looks very much like the Query View object for Employee. There are some flags set differently and the Entity View object 'Entity Objects' tab shows the Employee table selected. I can tweek the Query View to look like the Entity View but it still does not behave the same, the commit does not save data.
Thanks for all the help, Steve

How do you vary the Date/Time stamp format in File Adapters

In the receiver channel of the File Adapter where you specify the 'File Name Scheme', you do have the option of specifying a 'File Construction Mode' of 'Add Time Stamp'. How can you specify a different Date/Time stamp format ( eg MM/DD/YY vs YYYYMMDD vs MMDDYY, etc. ) without changing the Date/Time stamp for the entire SAP system? Also, can you control where the Date/Time stamp appears in the filename?

Hi,
There are many threads discussing the same issue. Go thro the following:
Dynamic file name (Date) in Receiver File Adapter
Receiver File Adapter - TimeStamp
Bhavesh's reply in above thread:
You can use Adapter Specific Identifiers and then change the file name in the mapping. Append the tiem stamp in the format that you want and so on.
Just use this code in an UDF,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String SourceFileName = conf.get(key);
java.text.SimpleDateFormat dateformat = new java.text.SimpleDateFormat( "yyyyMMdd" );
dateformat.format( new java.util.Date() );
String newfilename=SourceFileName+dateformat;
// change to new file name
conf.put(key, newfilename);
return "";
Regards,
P.Venkat

Date-Time stamp on CQ published pages

Hello,
How do I display last-published-date-time stamp for published CQ pages. This is critical to customers, as the date-time stamp determines the relevance of articles.
Thanks,
Suhas Yogin

Try to adapt instance of com.day.cq.wcm.api.Page to com.day.cq.replication.ReplicationStatus and then use it's methods to get necessary data.

5800 does not retain date&time stamp for SMS trans...

Similar Messages

Maybe you are looking for