5800 does not save WLAN 'Advanced Settings', a bug...

Hi
My E90 and 5800 both were working just fine day before but now they only connect to my router and give an error "No gateway reply". I read some discussions and fixed my E90 by specifying 'advanced settings' of my WLAN in 'access points' but when I try to do the same with my 5800 and exit the 'destinations' tab, the settings revert back to 'automatic' due to which I cannot use my internet. I have updated to v.20 and still the bug exists. what should I do?
Thanks in advance.

thanx for your support. I managed to fix it in a roundabout fashion.
1. Entered settings in 'advanced settings' of WLAN and got back to list of access points (didnt exit 'Destinations')
2. Opened 'Web' from Main Menu
3. Connected through the same WLAN and opened a webpage (which worked)
4. Minimized 'Web' and exited 'Destinations'
as the WLAN was connected and settings were already in use, exiting 'Destinations' could not revert them back and were saved as it is.

Similar Messages

Power Manager does not save my custom settings

I'm running Win7 Pro 64bit SP1 (Swedish) and Power Manager v6.36 on my W530.
When I create a new power profile, I go through all the 5 steps, but afterward no new profile exist. I only see the default 5 ones from Lenovo PM.
Same thing if I change the setting in any of the 5 profiles, the changes aren't saved.
This is reproduceable every time.
The only changes that DO get saved are the settings on the Global tab like if I choose to do nothing when the lid is closed.
Is there any way to get the Power Manager to work as it should?
PS: I really miss the possibility to swiftly change power profile via a left click on the green power gauge next to the systray. Nowdays a single click load and start up the entire Power Manager application. This is SO tiresome when I just want to do a quick change of the profile.
PPS: I had the same problem in v6.32 and just installed 6.36, but still the problem persists.

It sounds to me that the two power managers are conflicting with each other. Try to make your custom power settings inside of the Lenovo Power Manager.
You can do this by opening the Lenovo Power manager and selecting the power plan tab, directly under the tab is a button that says New. When you select this a new window should open to allow you customize your own power schemes. You will be able to customize the System settings such as: Maximum CPU speed, Display Brightness, Graphics Power plan, also desired Idle timers, events, alarms an other advanced settings. Once created you will see your new power plan listed under the default power plans.
If this does not work, I would then suggest uninstalling the Lenovo Power Manager and utilize Microsoft Power Manager.
Good luck! Let me know if you have any questions
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

InDesign CC: Bug: Does not save PDF Export Settings with documents (as had happened in CS6)

Just as the title says.

Deidre,
You might enjoy this PDF report, which discusses how to preserve all 21 presets in InDesign CS4. Among them is a discussion of PDF joboptions settings; where they are saved; etc.
• A PDF tour of all presets in InDesign CS4 and CS3 with Mac screenshots (download now)
• A PDF tour of all presets in InDesign CS4 and CS3 with Windows screenshots (download now)
Hope this helps,
Mike Witherell in Maryland

Mac does not save settings.

Hi, I'm new here (I haven't got my mac for a long time either), so please bear with me!
I have a problem with many programs, namely my mac does not save the settings.
Word: The change of default Czech language into Polish is not permanent. Czech comes back after the restart.
Ableton: The authorisation of the program is withdrawn when I switch the laptop. I have to authorise it again after every restart.
Cubase: It changes audio input and audio output back to internal speakers and microphone after the restart.
Additionally, for example, I have changed the preferences of video files. I have changed the default player from QuickTime to VLC. Restart undoes the changes.
Has anyone have a similar problem?
Thank you in advance for your reply.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

Question
WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp

Why is my Apple ID not working in iTunes and App Store on my iPhone? Nothing happens if I click buy for apps or music. If I then go to settings/iTunes App Store my Apple ID is not there. If I then enter ID and password it does not save or link to account?

Why is my Apple ID not working in iTunes or App Store on my iPhone? When I try to buy apps or music it asks for Apple ID so I enter my info and nothing happens. When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account. I do not have this problem with iPad ID is stored and can be used in App Store and iTunes. I have just upgraded to 5c and it's still a problem.

LeesaHeeley wrote:
When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
Good luck.

Firefox does not save my settings when I reboot

I have Windows 7 Ultimate. I was having problems with Firefox 3.6.16 crashing to the point where it wouldn't work. I uninstalled it and downloaded version 4 but had problems with it hanging all the time. I went through the help section, one of the things I did that was recommended was to delete my sessionstore files and any extra copies. I think there were three of them. I deleted them all but Firefox 4 still was hanging.
I uninstalled 4 and reinstalled 3.6.16 again. Everything seems to be working okay except when I reboot or restart my computer it does not save all of my password logins or any special settings on websites I visit all the time. So every time I start my computer I have to log into all my sites again, and I have a lot of them so this is really a pain. I'm not sure if this has to do with deleting the sessionstore files or not. I checked and I do have one sessionstore file instead of three.
Not sure what else to try. If I leave my computer on I stay logged in to all my sites and my preferences on those sites are maintained. Anyone have any idea what's going on?

I have tried to make a backup of the bookmarks file. Renamed the old one and called the backup "bookmarks.html".
The places.sqlite file is not "secured" (there does not exist a "locked" attribute in the general tab on the Mac), so I assume it is not locked.
Nothing seems to work. Possibly I can best uninstall Firefox and try to reinstall it, or does that not solve the problem.
Otherwise I go back to Safari :-)

Firefox 3.6.3 does not save any history, does not save passwords. I have read the forum and checked my settings (ok), started in Safe mode (still does not work).

Firefox 3.6.3 does not save history, nor passwords. I have read the forum and checked my settings in Privacy (all ok), I restarted Firefox in Safe mode (it still does not remember history or passwords). Running on XP. I think these problems started when I upgraded to 3.6.3.

I had the same problem after an upgrade to 3.6.3.
I was using password manager for a number of web sites before. Not using cookies but password manager.
After 3.6.3 auto upgrade it did not work.
I could not enter private browsing mode.
When I looked in tools>options>security at my saved passwords the list was blank. The button in the saved passwords dialog that normally says "Show saved passwords" was actually blank (the button was there but there was no text on it).
I did have my old bookmarks and was able to create new ones but oddly the bookmark all tabs menu function wouldn't work.
I decided to reinstall firefox 3.6.3. There is no way something with that many bugs got out!
I was able to get the full firefox executable from http://mozilla.com
I closed all firefox windows and ran the installation.
After re-running the install and starting firefox everything was fine. It must have been a bad download or the original install got messed up somehow.
I hope you have the same good fortune I had!

How do my boss and I share documents via iCloud? I log in as her to download a Pages doc, edit, then save to iCloud again but it does not save to hers. Even if I'm logged in as her.

I log in as her to download a Pages doc, edit, then save to iCloud again but it does not save to hers. Even if I'm logged in as her.
Thanks in advance!

This only works if you add her account as your primary accoun on your device and enable syncing "Documents & Data" in "Settings >iCloud".

5800 does not displaying streaming links on real p...

hi to all,
my 5800 does not refresh streaming links on real player, streaming lings are stored on memory card but real player keeps refreshing it .
thanks to all

Hi,
I have the same problem.
I was watching 3G TV on RealPlayer when suddenly RealPlayer crashed. This made the Home screen shortcuts disappear, and the Dial Pad and Contacts Pad stopped working.
I managed to get the shortcuts back, and to recover the Dial Pad and Contacts, by deleting a file in c:\private (but I should not talk about this here).
Anyway, now, the streaming links existing previously to the crash do not display, as the original poster says, the list refreshes itself but appears empty.
The links are there though, because when I try to re-save the same link, RealPlayer creates a TV_H26401 link, as the TV_H264 link already exists.
Is there a way to reset the list, or clear it, or to recover it? Maybe by deleting some hidden file which holds the list? No, I am NOT doing a soft or hard reset to solve this problem :-)
Thanks in advance!

Report Template does not save

HI,
I am creating a new report template. On save I get this error: Error occurred while saving the document template; save again. Although I save again, it does not save the layout. At this stage I don't check the symbols as I have not yet created any into the layout. Even though I say 'check', it does not save at all.
Can anyone help. I have checked the File locations for Template folder to be correct C:\....\SAP\FrontEnd\SAPgui\wwi
Am on GUI 7100.3.12
Patch 12
Any recommendations ? Thanks

Hello Sanjay,
It seems to be DMS configuration issue. May be your system is trying to store the template document to external database by using "kpro". Please check for following two configurations:
1. Go to Basic Data & Tools-->Report Definition >Settings for Document Management>Assign EHS doc type to DMS doc type Here for doc type "SBV" , Ty. should be "SBV" and Data Carrier should be "SAP System" if you are not specifying any external server for document storage.
2. Next, Go to Basic Data & Tools-->Report Definition >Settings for Document Management> Check Doc types and doc statuses. Go to the "Details" of doc type "SBV", and uncheck "kpro" if checked.
If you have configured external server for WWI docs, then you need to define different data carrier.
Please tell if it solves your problem, otherwise you may be probably having problem with your document status management.
In that case, you may like to refer following SAP notes in sequence.
995736,1005225,1091699.
regards
Pavan

Firefox does not save toolbar I made

Since FF upgraded me to Firefox 23 My tool bars are messed
Every time I make a new toolbar Via "Customize" > "Add New Toolbar" after I exit it does not save.
Yes I read over 10 different articles on it.
1) I deleted the localstore.rdf and started from scratch. After 15 minutes of dragging all the icons to various toolbars I close out of Customize. I then restart Only to find my toolbar not saves and icon missing (placed back into the Customize Box)
2) Only solution ALWAYS given is going to Safe Mode and resetting everything.
That requires me to spend 5 hours backing all the settings and data I have saved in the various 189 items loaded.
Why so many? If not that many I would have to spend 6 hour more all day on my computer doing things that many of these addons do for me. Time is Money.
3) This is not the first time over the 8 years or so of using Firefox this has occured.
4) Question why doen't save when you close out of "Customize" than when you exit? Plus what in Firefox is messed up that it is not saving right?

Nope, I tried it again and added buttons to the New Tool bar I made and everything disappeared once I restarted Firefox up again. So they have not solved it. From FF 23 now on FF26 and it has not been fixed

When I am on Safari, the page randomly goes back to the previous page I was on. This is really frustrating when I am writing something online because it does not save my work. Fix for this?

When I am on Safari, the page randomly goes back to the previous page I was on. This is really frustrating when I am writing something online because it does not save my work. Fix for this?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Acrobat 11.0.5 PDF Maker does not save attachments in Outlook 2013

I had lots of problems getting PDFMaker to work in Outlook 2013. Finally with 11.0.5 ver it appears to work.
Unfortunately....when saving attachments it does Not save the attachments.
This is a very serious problem as I am dependent on archiving emails.
Does anyone else have this problem. Is there a solution.
Looks like I need to use non Adobe product...... which is crazy.

Hi gnits999,
Please make sure that you have set the correct PDFMaker settings:
Go to Acrobat plugin in Outlook -> then click on 'Change Conversion Settings' -> and under 'Settings' tab check following highlighted option.
Regards,
Anoop

5800 does not save WLAN 'Advanced Settings', a bug...

Similar Messages

Maybe you are looking for