5800 does not turn on with SD card

Hi,
I have recently used Nokia PC Suite to delete some SMS from my Nokia 5800.
After that, the phone has stopped turning on when the SD card is in.
If I remove the SD card, the phone will switch on normally.
How can I fix this?
Thanks,
Marco
Message Edited by marcoterz on 06-Jan-2010 12:13 PM

Take the card out of the 5800. Put it in a PC and run a Check Disk on it. Fix all the errors. Re-insert it into your 5800.
If that doesn't work. Copy the contents of the card on your PC in a directory. Format the card. Copy stuff back on it. Re-insert it into your 5800.
Gilles.

Similar Messages

ZR65MC camcorder does not turn on with battery in position unless the power adapter is plugged in

Bought a ZR65MC camcorder in 2003. Enjoyed it so much, but a couple of yrs. ago, the tape compartment stopped opening. I just purchased another ZR65MC (used) on ebay in hopes that I could at least get the videos off & onto DVDs. Also, we are planning trip to Yellowstone soon, so camera/camcorder will be nice. Problem: The used one does not turn on with a fully charged battery unless the power adapter is plugged in. I assume battery is good because it turns on my older camera. I do need backup batteries in both, but have not done this yet. Please tell me I have not purchased a bad camera, maybe just doing something wrong? Would have never purchased a used camera online, but did this time. I have ordered a new battery BP-522 with wall charger. It should arrive next week. Any suggestions?

Hi Sharon72064,
If the new battery won't power the camcorder without the Compact Power Adapter, unfortunately, it's likely that an internal component has malfunctioned.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My blackberry z30 does not turn on with red light flashing

hi i have a blackberry z30 , after charging my blackberry z30 it does not turn on and show me a red light blinking 5 times...what i should do? please help.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):Connect your BB to the wall chargerLeave it alone for 2 hours, no matter what the LED or the display doesHold the up/down volume keys until the device is fully powered offWait 15 minutesPower up normallyWait another 2 hours, no matter what the LED or the display doesThis has been known to "kick start" some BBs. If it fails, then please try again but increase the step 4 wait time to 2 hours, and perhaps as long as 4-5 hours. If it fails to help, then your next step is in-person evaluation by a qualified technician. If you remain in warranty, seek support under those terms. If you have no warranty, then seek out a local (to you) shop with a qualified technician and have them provide you with a proper evaluation and estimate.
Good luck and let us know!

My nokia 5800 does not turn on after update??

i updated my nokia 5800 yesterday, and it a 100% bt then my phone restarted by it self (as it normally should) then the usb connection came up after it turned on i clicked pc suite bt then there was an error and it said to take out the usb and the battery, so i followed this and now my phone will not turn on, any help?

He means shut the phone down, take out the memory card and start it up again. Then shut it down, replace the memory card and turn it on again. I don't know if that will fix your problem, but that was the instruction...........
If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

Nokia 5800 does not turn on

Hi there!
Well, my Nokia 5800 Xpress Music has been having this problem for some time already...
Sometimes, when I try to turn my phone on, it doesn't work.
It vibrates a bit (the normal), but it doesn't appear nothing on the screen.
Can you help me?
Thanks

Try to remove battery, then memory card, put battery back on without m. card, and turn it on. If it works, your memory card may be corrupted. See under discussion memory card problem, may save first all information (back up) then restore; a hard resetting then may be on option.. Also type in your problem on discussions and you will find answers from the veterans...
All this guys starting with "psychomania" and more on, are wonderful. They save me in the past and also saved Nokia... Thank you guys all, and God BLESS YOU...
NOKIA please watch this forum and fix people,s problems...
From Chicago IL, Saluti to all and big thanks again..

5800 does not maintain connection with Sony Ericss...

I recently upgraded from the N70 to the 5800. I was using a Sony Ericsson HBH-602 bluetooth headset with the N70, and it worked perfectly. Specifically, as long as bluetooth was enabled on the phone, all I had to do was turn on the headset and it would connect with the phone, and remain connected as long as both were powered on and in range.
With the 5800, the headset also connects to the phone when turned on, but the phone drops the connection a few seconds later. However, if I initiate the connection from the phone, it works as expected, and remains connected. This is usable, but it would be preferable if I could control the connection entirely from the headset, as described above.
Any suggestions would be greatly appreciated.
Thanks in advance.

I have the same problem but with Nokia BH-903.
It worked really fine with the N95, but with the 5800 it doesn't work so well. When i am in a call it always disconnect to the phone, or when i am listening to music it paused the music or it disconnect.

Imac 27" does not turn off

Hi,
I have a brand new iMac 27" all in one, which works perfectly except for the fact that 3 times out of 4 it does not turn off with the normal command and I am obliged to turn it off with the back switch, after it remain for various minutes with the blue window on and the wheel running.
Initially I tried to disconnect an external HDD which was connected by USB and seemed to have solved the problem for a few days, but now the problem shows up again.
At the moment I have connected only a Bamboo device on the USB port.
I have tried to Verify the HDD and repair the disk, but no improvement.
Any suggestion on how to proceed? Thank you
SS

If all the prior steps have not resolved the issue then at this point I would suggest:
Remove any additional memory you may have added to the system
Reinstall of the OS: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8177.html
If the issue persists after you follow the above steps, you may wish to make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.
If this issue was occurring right out of the box on the brand new system without you adding any additional software / migrating data from an older Mac, be sure to let them know that as well. Its unusual to have a blank, brand new system have this kind of behavior so that will save them some diagnostic steps.
Best of luck to you.

TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

My problem is that the iPod does not turn on. Everytime I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a warning sign.

IS MY IPOD DEAD?!?!?!?!?
I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
to charge it as well as connecting it to itunes but no success. Could you please help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When I turn my iPod the screen does not turn with it :(

When I turn my iPod the screen does not turn with it >:(

Try here:
iOS: Not responding or does not turn on

Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793677]''
Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793677]''
Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

HT201412 my ipad3 does not turn on after it went off while using it, anyone with same experience and have it resolve already?

my Ipad 3 will not turn-on after it went off while using it, anyone with the same experience and have it resolve?

Is the battery charged?
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.

I just got my ipad 2 and when i go to trun it on it has a picture with itunes prompting me to sync up. When i do this it does not sync up with my itunes. I can not turn my ipad2 on. Any one out there got any answers. Appreciate the help

i just got my ipad 2 and when i go to trun it on it has a picture with itunes prompting me to sync up. When i do this it does not sync up with my itunes. I can not turn my ipad2 on. Any one out there got any answers. Appreciate the help

The first thing that has to be done with a new iPad is to activate it via iTunes. What version of iTunes, and what spec computer, have you got ? The iPad's minimum requirements are (from http://www.apple.com/ipad/specs/) :
Mac :
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
PC :
PC with USB 2.0 port
Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
Edit : there is troubleshootin here :
pc - http://support.apple.com/kb/TS1538
mac - http://support.apple.com/kb/TS1591
Message was edited by: King_Penguin

Ipod touch 5th gen does not turn on and i only get an empty battery with thunderbolt at the bottom when i try to recharge it

ipod touch does not turn onand i get empty batterywith small thunderbolt at the bottom wen i try to charge it

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

5800 does not turn on with SD card

Similar Messages

Maybe you are looking for