5800 Email application problem

When I install the email application from nokia the data connection never disconnect. It is always on. I tried uninstallin and reinstalling, soft formatting, hard formattin, taking the memory card out and trying the options I just mentioned for like a hundred times. I want to use the **bleep** application but if I'm in a wireless range it is just always on. If I'm not 3G is always on. Tell me a **bleep** good reason why I should not throw this **bleep** device out of the window. Because I have not yet seen an application is useful, or bugfree enough to use it or both.
Moderator Note: Language edited. Please show some respect towards other users of this public forum.

Is THIS what you want ?

Similar Messages

  • Nokia Email Application problem since 06.07.2011

    Hi all,
    I'm using E71. Yesterday my Nokia email stopped synchronising my accounts and just displayed a password request field and a drop down menu for access point (on the usual pink background). However, I can't log in with my account password (the one of the first email account I registered in the service).
    It just keeps asking me for password again and again.
    I tried deinstalling the application and installing it again, but now when I try to register a new account it just says that there no connection to server can be established.
    Please, help.
    Thank you in advance.

    try to formatt your phone and reinstall. i had solved the problem on my phone by doing this.

  • Nokia 5800 email application

    dear, ive recently reseted my nokia 5800 and deleted everything..including my email applic.tion-not the one found under mesage settinp but found on application. How can i download it as all that ive downloaded deducts my data bundle bt when i open they they say...unable to open.

    Is THIS what you want ?

  • 5800 email problem

    I am having problems with my 5800 email client. I set my Gmail POP mailbox and configured my account so that the server only sends me messages received after the day I got my phone. Everything seemed to work fine unitl yesterday, Now I can't receive messages while connected  (I have to reconnect every time I want to receive new messages) and the phone deletes all the old emails (even those that have not been read).
    I hope someone could help me with this problem. 

    I am also experiencing very similar problems.
    My 5800 happily connects and retrieves new email headers from my (sky)Gmail server. However, any email headers that are in my phones inbox are automatically deleted, even if they haven’t been read. This is obviously extremely annoying. Any Help appreciated. 
    My phone is running Software version V20.0.012
    Thanks

  • MIME type text/xml shown as inline in email applications

    Hi, I am currently using MimeBodyPart object to set the text for the email, using the setDataHandler() method. The problem is when i use the MIME content as text/plain or text/html, the text is showing inline in my email application.
    However problem arises when i use the text/xml MIME content type, the text is not shown as inline, it is set as an attachment. I want to know if at all text/xml can be shown as inline text in an email application or will it be always appear as an attachment.

    Hi Saurab,
    Currently im also facing the same issue as urs. Im trying to send a disclaimer in the email which contains some special characters such as / : ;
    The client is also using MS outlook to read the mails. They are receiving the disclaimer as an attachment instead of as plain text.Below is the format of my email:
    1. Body of the mail
    2. Actual report of the client sent as an attachment
    3. disclaimer
    In the forum(http://forums.sun.com/thread.jspa?threadID=5323022) it was mentioned that if the attachment is sandwitched with test, then the text following the attachment will also be sent as an attachment. Hence i just swapped the steps 2 and 3 and had the report as a final one.but still the client receives the disclaimer as an attachment. Your help will be appreciated.

  • 5800 no applications show up on Application List (...

    I noticed today that when I tap on the Installed apps. option under Application Manager (under Settings), the screen will go "blank" (no icons or info, just the background wallpaper) for about 3 seconds then return to the Application manager screen.  Thus, I don't have access to the options menu for the installed applications list (I was to modify the navigation button settings on Gmail).
    It appears that several other people with the Nokia 5800 have this problem but I haven't found a solution.  How did others fix this problem?

    Restart phone and try to open "installed apps", don't run anything else. If still not working then uninstall any recenctly istalled apps, go to main menu>apps folder>options>organise>(single tap particular app)>options>remove Then try "installed apps"
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • Email Application Error ?!?!?!

    Help - I have my Pre set up through both Yahoo & Cox email accounts. My Cox email account doesn't seem to be sending emails (receives just fine) and that's where my problem began. I tried to reply to an email and it obviously didn't go through so I received an "Email Application Error" in regards to this email. I've have since deleted the the email from the Outbox and both the Outbox and the Sent folders are empty but... I am still getting the error message and I have no idea how to stop the error message from popping up. Please Help!! 
    Post relates to: Pre p100eww (Sprint)

    Greetings and welcome to Palm Forums
    if you are still getting the error delete the email account from the pre, restart the device then add the email account back in if the origional settings do not work try this:
    Cox Communications blocks outgoing unsecured IMAP communications that take place using Port 25. To avoid this issue and to ensure secured email, enable SSL on Port 465 and server authentication in your email client.
    So  set up for incoming is same as home:
    mail type: POP
    pop.east.cox.net
    user name
    password
    port #110
    no encryption
    outgoing
    smtp.east.cox.net
    Use Authentication-OFF
    username
    password
    port # 465
    turn on SSL encryption
    good luck
    Please check the knowledge base for advice and self help options at http://kb.palm.com and for windows help go to http://support.microsoft.com
    Please post in the forums. PM's will not be answered.

  • Email receiving problems

    Hi,
    I am having Emails receving problems with my BB 8320 Curve. Somehow I can not receving no emails from no emails accounts, but I can send them with out problem. As I noticed I get on my oldest BB device a email notification after I registered on BB Internet Service, I get an notification for service book. Here on this new one, I do not get anything, simply the mail seams like it is registered, I can sending emails, but I can not recive anything.
    I bought this BB from second hand and was bought in T - mobile somewhere.
    If somebody is knowing anything, I will appreciate this a lot.
    Thank's.
    Boštjan (Slovenia)
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    Do you have a data plan from your carrier?
    Can you use the internet?
    Send a PIN message to your self, if your don't receive it you do not have a
    data plan, or the carrier had not correctly provisoned it.
    Let us know,
    Thanks,
    Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks  
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • IPhone email application

    Does apple plan to invest more time & $$$$ to improve the features on the resident email application?  The app is great for very basic functionality, but could use a huge upgrade in a few more advanced features. I.e...allowing attachments while "replying" to an email, adding a reminder to an email (not just adding a flag) .  Any feedback would be greatly appreciated

    I'm using a gmail IMAP account and I'm having the reverse problem.
    On my 3G, once I'd read and deleted emails from my iphone, they were also deleted from my gmail account, so that later that day when I downloaded emails to my home pc (via pop3), those deleted emails were not present on my home pc.
    But on my new iphone 4g - these read and deleted emails are still being downloaded onto my home pc.
    Any ideas?
    I've done the usual checks - settings on my iphone (ie when trash on phone, bin on the server etc) but no luck so far...

  • TS3899 My email application will not stay open

    Today my email application started closing itself a few seconds after I open it. Tried restarting the iPad and checking for email lock down but am having no luck finding the problem. Any suggestions?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Delete the app and redownload.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

  • Error #23 is comming up all the time on email application why?

    why is this error coming up in the email application on firefox. i have just done a security update and that did not fix it

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/]
    or this one
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • Bell Pre won't send email on Telus account (Email Application Alert)

    Hi all,
    Some help required from all you smart folks out there.
    I have just enabled a Bell Palm Pre in Canada, and my email service provider is Telus.
    I entered my Telus email address and password during the first start-up procedure, and the Pre started up ok, and was able to synchronize with my Telus webmail server.  I was able to see pushed emails from my Inbox and was also able to see other folders in my webmail account.  
    Then I tried sending an email, and the problems started.  My email was addressed to my hotmail account ([email protected]).  When I hit send, the status line on the bottom of the Pre said "Sending "test"".  (I called my first email "test").  Then a couple of seconds later I got another status that said "Error sending "test"".  Then a little envelope icon showed up on the bottom right corner, and clicking the icon brought up a big yellow warning triangle with the message "Email Application Alert" and below it "Error sending "test"".  The outgoing email then just sits in the Outbox with a little yellow triangle next to it.
    I next went into my email account settings and went into the "Change Log-In Settings".
    My incoming email server was listed as imap.telus.net but incoming was working OK, so I didn't touch that.
    The outgoing email server was smtp.telus.net and the "Use Authentication" button was in the "On" position with my email address and password below.  It was using port 587 with No encryption.
    The first thing I tried was switching the "Use Authentication" to the "Off" position.  The button slid to "Off", so then I exited the settings page.  The status line at the bottom of the Pre said "Preferences Updated".  So just to check I went back into the settings page, and the "Use Authentication" was mysteriously switched back to "On".  I have tried this numerous times since, and the Pre refuses to hold the "Off" setting, so my "Use authentication" is now always "On".
    At this point I called Bell Technical Support.  I talked to a nice guy called "Jimmy".  He had me change the outgoing mail server to mail.telus.net and then to mail.1xbell.ca but neither of those helped.  In fact, they seemed to make things worse because now the Pre would try to send the outgoing email for about 30 seconds to a minute before puking up the same error message as before.
    Jimmy also asked me to change the port setting to 20 and turn encryption to SSL.  Nothing helped.
    Jimmy finally said he couldn't help and that I should call Palm technical support.  But by then they were closed for the night.
    So I thanked Jimmy and continued trying to work around.  I put all my settings back to what they were before I talked to Jimmy.  I tried a few more things, one of which was sending an email to another [email protected] address.  WOW! Success!  That email sent successfully.  But wtf?  Why only to telus.net email addresses??
    It was about midnight, and I got on the phone to Telus technical support (they go 24x7).  I got connected to Vartsala.  I explained the problem to her (about four times) that I could only send to [email protected] email addresses and to me it looked like the Telus smtp mail server was blocking all addresses other than telus.net email addresses.  She insisted that the Telus smtp server was not the problem, and it was at the Palm Pre level.  But why could the Palm send [email protected] emails, but not [email protected] emails?  She couldn't answer that.  I then talked to her supervisor who also insisted it was not a problem with the Telus smtp server.  She then refused to help me any further because she said it was not a Telus problem, and there was nothing she could do.
    So that is my first question to everyone out there:  Is this a Palm Pre problem, or is there a problem with the Telus smtp mail server not accepting messages from the Pre unless they are addresed to an [email protected] email address?
    This morning I called Palm techcinal support, and after being on hold for an hour, I got connected to "Juliette".  Juliette took down my info, and said she would not be able to help with this.  She said someone will phone later today or maybe in a couple of days, and that I should be patient.  So, no solutions there.
    Any ideas anyone??
    Cheers. 
    Post relates to: Pre p100eww (Bell)
    This question was solved.
    View Solution.

    OK folks, I think we have a winner.
    I finally got frustrated so I sponsored a conference call with a Palm Level 3 tech support guy, the Telus rep and a Bell rep.  We were on hold for a total of like 45 minutes as I chained the call along and finally got everyone on the same line.
    So here's the deal: The setup has to be done manually as thepoet suggested.  The incoming server is OK as imap and imap.telus.net with no encryption.  The outgoing server has to be set to point to mail.1xbell.ca with NO authentication, port 25 and no encryption.  The initial Bell tech support guy was quite close to the solution, just the wrong port number and the wrong sequence of setting it up.
    I have been able to send successfully, but want to try a couple of more things before I declare it a complete success.
    Thanks for your help Poet, much appreciate your persistance.

  • Scan to Email Application not found

    Hello support,
    I'm having a problem with the Scan to Email program. When I use the HP Scan app and I want to make an Email as PDF, the app starts to make the scan, but when i want to send it to my email i receive the error that the Scan to Email Application is not found. The HP Scan application cannot find an email application installed on the computer.
    On the computer we have a local installation of Lotus Notes. Is it possible that the program doesn't work with Lotus Notes? And is there a way to make this work?
    I made the Lotus Notes program as default email program on the desktop.
    Can you please help me with this problem?
    With kind regards,
    Leedur

    Hello, 
    If you are initiating scan to email using the printer front panel, then your printer need to be connected to Internet ( Web services should be enabled ). After which the printer would prompt you to key in the recipient email address before you touch SEND.
    If you are initiating the scan to email using the printer software ( HP Printer Assistant ), then you need have an email Client ( like MS Outlook or Mozilla thunderbird ). The software would open a new compose email with the scan pdf as attachment .
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Since I've upgraded my iphone 4 to ios 4.3.3, I can't access my inbox of hotmail.While it's checking e-mails,email application is closed and turn back to home screen.What should I do?

    Since I've upgraded my iphone 4 to ios 4.3.3, I can't access my inbox of hotmail.While it's checking e-mails,email application is closed and turn back to home screen.I've restored my phone but nothing changed.It still goes on.What should I do?

    Thanks for reply,
    It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
    Iwish I have not upgraded.
    I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
    Thanks for your valued suggessions but it didn’tmade any difference to my situation.
    So now I have an ipod in the price of an iPhone4. Crap.
    Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

  • When I attempt to email a link using "File" then "Mail Link to this Page", I can't.  I get a message saying "...Safari can't find an email application." even though I am using mail. Why can't !?

    When I attempt to email a link in Safari using "File" then "Mail Link to this Page", I can't.  I get a message saying "...Safari can't find an email application." even though I am using mail. Why?

    I got it - no need to respond.  I went to Mail Prefs, General, Defalt Email Reader, and rechose Mail.  Problem solved!

Maybe you are looking for

  • Is FCE or FCP the one for me?

    Hi, I'm new to the video editing world, and my main reason for getting into it at all is to prepare DVD demo reels of my film score work. All of my source material is QT movies. I recently assembled just such a reel using iMovie. Got quite the educat

  • Oracle DB sessions on Linux and Windows

    Actually I am confused the way session memory is allocated on 32 bit windows and linux OS. Windows is a thread based architecture where all user sessions are treated as threads of oracle.exe process. The addressable space is 4GB and oracle.exe can us

  • Can a FM in R/3 be made system independent?

    Hi Experts, My requirement is such that somehow I want to expose a FM already existing in R/3 to be used in some other application such as WD JAVA or BPM. Now I know how I can do that but the question is I do not want to connect to R/3 while executin

  • When I hit the attach icon in mail I can select folders but not individual files

    When I hit the attach icon in mail I can select folders but not individual files

  • How to reset Conversion Routine NUMCV in InfoObject

    Dear all, In order to test, I deleted the Conversion Routine NUMCV in tab General of an InfoObject. And now I'd like to reset it as NUMCV. A message says: Conversion Routine NUMCV was deleted. How can I resolve it? Thanks a lot in advance