5800 firmware update v60 slide to unlock not avail...

I updated my 5800 to v60 yesterday and I saw in several fourm that slide to unlock feature is available with this new firmware update. But for me when i press the menu button earlier i used to see the screen get lit for sometime. But after the update I am not seeing it and even the slide to unlock feature is not available. Is there any way to enable this new feature??
Solved!
Go to Solution.

Hi
I tried updating to v60 through Nokia suite, but just as about the installation is about to start, it says "Cheking if you already have the installation files on your computer" and then i get an error saying something went wrong (with code 12017)
I tried NSU, PC Suite, Nokia Suite (reinstallation as well), a soft  and a hard reset but im still unable to update to v60, although it is available in the OTA(update via pc) and also in the Nokia Suite.

Similar Messages

  • HT1212 slide to unlock not responding

    slide to unlock not responding on my Ipad 2, tried to hard reset it, still not responding, any suggestions

    If Restore doesn't work, force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • Firmware update for officejet x64 could not find printer

    The firmware update for officejet x64 could not find printer.  Printer is on wireless network.

    Hi,
    The firmware update utility does not support wireless connection, it only allow updating the firmware via USB as written on its installation instructions:
    The HP OfficeJet 4620 series printer Firmware flashing (upgrade) requires a wired network or a USB connection.
    DO NOT upgrade the printer firmware in a wirelessly connected printer.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104396-5&cc=us&dlc=en&lc=en&os=4063&productOid=5101234&sw_lang=
     Try updating the firmware wirelessly as following:
    On your computer open the HP Officejet 4620 software and click the Printer Home Page (EWS) option.
    From the displayed EWS page open teh Web Services tab, then click on Product Update and follow the steps on screen (enable Web Services if it disabled)
    Follow the steps on screen to update the printer.
    If the process fails, temporary connect a USB to the printer and then launch teh firmware update utility once again.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT4972 I have had an iphone 3g and recently had to restore my factory settings, when I have tried to add facebook on again it says that the relevant update of 4.3 is not available, however the 4.3 update is not available for the iphone 3g. how can i solve

    I have had an iphone 3g and recently had to restore my factory settings, when I have tried to add facebook on again it says that the relevant update of 4.3 is not available, however the 4.3 update is not available for the iphone 3g. how can i solve this and get facebook back on my phone

    You cannot.
    Unless you have done as you should and have the old facebook app on your computer. 

  • Slide to unlock not working

    Ipod 2nd Generation, Slide to unlock is not working - Ipod is not reponding to "sliding".  I've tried a soft reset but it still won't slide to unlock.

    You probably encounter the same problem then mine. The problem is not hardware but software due to a bad update by Apple. MIne was working perfectly... I repeat perfectly... No bugs and no problem at all and just after I decided to update the OS it stop working!
    I did try all those tricks... restore, factory restore,... even go to the App Store where they tried to push me to buy a newer product or to pay for a fictional repair since the issue is not physical. It doesn't have a scratch or even a single drop of liquid... It was a careless update. A way to push people like me and you to throw their old iPod Touch into the garbage. The only solution will be to find an older OS but it seems to be impossible to find.
    For sure I will never buy a Apple product again !

  • Nokia 5800 firmware update! cannot update to ver.2...

    I tried to update my Nuked!5800(sorry bout tht catchname,but looks like its going to be nuked anyway after I update, coz of some serious bugs in the newest firmware!) by FOTA, but after searching for update it said no current updates available,I got ver.11 which I sucessfully updated last time from the first version. I want to update to ver.20, but cant.
    as I'm located in the middle east, can tht be the reason tht its still not available here? but tht cant b coz its already released here. then how come I still cannot update over the Air??
    Any suggestions???

    kazamraz wrote:
    I tried to update my Nuked!5800(sorry bout tht catchname,but looks like its going to be nuked anyway after I update, coz of some serious bugs in the newest firmware!) by FOTA, but after searching for update it said no current updates available,I got ver.11 which I sucessfully updated last time from the first version. I want to update to ver.20, but cant.
    as I'm located in the middle east, can tht be the reason tht its still not available here? but tht cant b coz its already released here. then how come I still cannot update over the Air??
    Any suggestions???
    Nokia doesnt provide update by FOTA for v.20 in middle east at the moment. But you can update it via Nokia Software Updater by logging on to www.nokia.com/softwareupdate 
    Nokia 5800 XpressMusic (11) [Product ID: 0559416]
    V 21.0.025 (date: 02-04-2009)
    network: mobily (etihad etisalat)

  • IPad mini slide to unlock not responding

    For some reason when the iPad mini is powered off then powered on, the slide to unlock will not immediately respond to my finger until several tries. But when it's on standby mode there is no problem. I already reset the iPad and updated to the latest OS but it is still doing that. Anybody has experience this and know any solution?

    Try this:
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    (no media or data will be deleted from the device, this will only take a minute).
    If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.

  • IPod touch "slide to unlock" not responding, same with "slide to power off."

         I'm trying to fix my friend's iPod 5. As of last night she said that her iPod will not slide to unlock, as if the touchscreen is unresponsive. However, assistive touch is turned on and that functions fine. The device also cannot be powered down, as that slide bar has the same response, and no amount of tapping or sliding yields any response. The device is also protected by a password, making it impossible to connect to itunes, and even if you use siri to force your way to the passcode screen, none of the buttons but assistive touch will respond.   
         I've tried to force the device into recovery mode, however the home button is broken (why the device requires assistive touch) and no matter how much I try it will not go into recovery mode or do any sort of reset. As for physical damage the screen is in perfect condition, the only flaw being the broken home button which was done months before this problem.
         Any advice or ideas would be greatly appreciated!

    Try letting the battery fully drain. Then charge and restore if you can. Otherwise
    make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem besides the button.
      Apple Retail Store - Genius Bar                              

  • 3G w/updated OS4  "SLIDE TO UNLOCK" is EXTREMELY SLOW

    My iphone 3G has gone berserk since the updated version of software. It hasn't done anything but problems: slow applications, slow GPS navigation, oh yeah did I mention programs freezes in the middle of a job and kicks me out from times to times. ALSO, the "slide to unlock" button operate very very slow. I'm getting very frustrated by these problem EVERY DAY. Will there be an update version to fix the issues that I have?

    Turn of Spotlight indexing on your iPhone 3G.
    The downside is obvious: if your phone stops indexing itself, search results are no longer going to be valid. But for those who rarely search for anything on their iPhone anyway, or those who are so desperate to get their newly ailing iPhone 3G back in working order that they’re willing to sacrifice functionality, it’s at least an option. The controls for doing so are buried within the Settings app, under the “General” subheading and then “Home Button” and then “Spotlight Search” and you’ll see about a dozen different types of iPhone content (apps, mail, music, etc) that are being indexed. Turn them all off if you don’t care about search at all, or perhaps try leaving on only the ones you absolutely can’t live without.
    This has helped me hopefully it can help you.

  • After firmware update on E51, phone do not boot

    I did a firmware update yesterday to 220.34.37, the update did go successfully, and made the phone not to boot as well.
    Can anyone help.

    You are entering them wrong.  All of those codes need a star (*) at the start before they will work.

  • Slide to unlock not responding

    My ipad2 is not responding to slide to unlock / power off, tried several times by rebooting but no success

    By rebooting do you mean a reset ? - press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • EFI Firmware update 1.4 - Mac does not shut down

    I am trying to install the EFI Firmware update 1.4 on my Macbook. The initial steps load correctly but when it is time to shut down the computer via the EFI update software, I keep getting the message that the laptop needs to be plugged in to a power source (which it already is). When I click ok, it just continues to repeat the message.
    I cannot get past this stage to continue with loading the update. Does anyone know how to bypass this? Many thanks.

    I've had issues similar to this, but not exactly. For me it was that the computer would never shut down, i left if over night one time and it kept going. try booting off the disk and checking your disk integrity and repairing permissions. That's what fixed my problem.

  • Slide to unlock not working but I can slide to answer calls (power button broken) HELP!

    Can anyone please help? 24 hours before my upgrade is due and my iPhone 5 has decided it won't let me slide to unlock...I can slide to answer a call no problem weirdly so Im thinking it isn't a fault with that part of the screen? My problem is compounded by the fact that the power on/off button hasn't worked in a while. this hasn't been a major issue until i am now trying to at least back up and then restore my phone. I can't enter the passcode to restore it! And i can't try lots of the suggestions I've seen which is holding the home and power button together as my power button doesn't work. I can't even sell the phone as faulty at the moment as i have no way of getting all my data off it!

    Take the device to Apple to address the hardware issue.

  • MacBook Pro EFI Firmware Update 2.7: installed or not?

    I have MacBook Pro EFI Firmware Update 2.7 showing as installed on Mar 17, 2015 on my AppStore Updates page; it also shows up as installed on Mar 18, 2015 and yet Mavericks wants to install it again.
    I seriously doubt this update has been updated so many times, something just doesn't seem right.
    Questions: what should I do? Is there a way to get rid off this annoying (1) showing on the AppStore updates?
    Thanks!
    Fernando

    I have also been getting an error message that reads "An error has occurred" "The digital signature on Mac Book Pro EFI Firmware Update is missing or invalid. The update may have been tampered with since being signed by Apple. Click Update to download and check the update again.(203)" [OK]
    This seems to indicate some sort of problem with/in the Apple Store, don't you think? Who do we call, Ghostbusters? :-) Hello, Apple, you there?
    Thanks for replying!
    Fernando

  • Router Linksys RV082 - firmware update?? latest or not??

    Do Cisco recommend me running the latest firmware update? Im just an individual who uses it for like a small web-/FTP-/Mail-server, etc...
    What are the recommodations? Personally I would have updated to the latest...but what are actually the Cisco recommendations?

    Thanks for ur informative answer.
    How do I find out which version I have of this router? I see you have v1 and v2 and v3...on mine it says nothing on the hardware (router) about which version it is.
    I assume its here (URL below) where I see which one is the latest for each version, correct???
    http://www.linksysinfo.org/index.php?threads/latest-official-cisco-firmware-for-small-business-routers.33233

Maybe you are looking for