5800 in a Test Room I Think this is a problem

To Day I'm final test befor go in a room i use silent mode and load in a pocket. Have a Calling in, i'm take my telephone in my pocket. suddenly my phon answer and Speaker phon in a test room. I think shall Slide befor Answer or More Function. Not Same iphone too.
I 'am Thai people. We Love ThaiLanD. Thai Land iT Travel Land Come to thailand NOW!!!
www.nokiagang.com (Thai language)
www.bu.ac.th (Bangkok u)
http://ju-untitle.hi5.com

As of 03/17/2015 NBME has resolved the VCDAssistant issue with the current Secure Browser offered, Yosemite is now compatible for taking online tests.
Other installs can block exam access though, Citrix Receiver being one of them.
To temporarily remove Citrix, follow these steps:
1. Open Terminal (command+spacebar, start typing terminal)
2. Enter this command string:
sudo mv /Library/LaunchAgents/com.citrix.ServiceRecords.plist /Library/LaunchAgents/com.citrix.ServiceRecords.oldlist
3. Enter the Mac admin password
4. Reboot machine
5. After machine has rebooted, launch browser, and then navigate to Secure Browser page. Download Secure Browser and launch exam. Browser should now run as intended and allow exam to launch.
6. After completing the exam, open Terminal again and enter this command string:
sudo mv /Library/LaunchAgents/com.citrix.ServiceRecords.oldlist /Library/LaunchAgents/com.citrix.ServiceRecords.plist
7. Machine will load citrix again on next reboot

Similar Messages

Hi there, I have just bought an ipad4 but it will not connect to my internet. I have tried every suggestion going to no avail. My netgear DG834g router is fairly old , do you think this is the problem? I am at a loss now and very frustrated!

Hi there, I have just bought my first ipad4 and have spent all weekend trying to connect to the internet. I have tried all Apple suggestions to no avail
. My Netgear DG834g router is a few years old now. Do you think this may be the problem? Do they have compatibility issues after a while? My ipad upgrade is IOs 6. I am at a loss what else to do and needless to say extremely frustrated!
Thanks.

First check that your router has its latest firmware.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Since you are a new iPad user .....
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download an iPad User Guide to the iPad from the iTunes store.
 Cheers, Tom

Am I the only person that thinks this is a problem?

I have a Iphone4 and my friend sends me a multimedia text and I open it to find that it has came in two parts, one for the pic an the other for the sound which destroys the whole idea of the multimedia text for me, then I say ok if I can't enjoy it then maybe I can forward it to some one that can, just to find that forwarding a multimedia text is even worse than receiving one. Now I live in a house with teenagers and all of them have Iphone's, three Iphone 4's an one Iphone 3. I have approached each of them on this an each of them give me a excuse why they don't forward or don't mind that the Iphone has this problem. Well, me being the guy that has to pay for these toys, have a problem with this!
I had a Motorola Karma before this IPhone an guess what? I sent an received my multimedia texts just fine! I got the phone for 20 dollars with a contract! I am over my 30 days on this phone an I am having more an more problems with it, like when I talk on the phone with it at my ear the lights on it flicker and guess what my ear will hit the mute button! Trying to send pic's with the phone as a text message an just to find it fail, again the teens have a work around for it! "just email it" well why should I do that if the phone says I can text it, my Karma did it just fine! I can't change my tones for my incoming texts or voicemails to what I want them to be, among other small things. I am very upset at all of this! This phone is not what I was told it was, an its gonna be a very expensive lesson for me, I should have researched instead of listening to everyone who had this phone!

I'm sorry to hear about your complaints. Let me try to address them individual to see if I can help.
For your complaint about your ear muting calls: Make sure the phone is snug to the side of your face. The proximity sensor in the phone needs to have coverage to assume the phone is next to your face. Check your iOS version number also. Make sure you're on version 4.2.1, which I'm told has some firm fixes that might resolve the sensitivity trouble with the proximity sensor.
For your complaint about not being able to change text tones: You can change them. Go to Settings, Sounds and Text Tones. You can change to any of the preset sounds set by the phones software. If you want to create a custom text tone, that's not an option with the phone and hasn't been since it's initial release.
For your complaint about MMS messages: That seems to be just how it works.
I understand your frustration with an expensive device not having bells & whistles you hope for, but the device does exactly what it promises. If the iPhone isn't your cup of tea, that's fine too. Everyone has different needs and expectations. Just do some fact checking before you invest money into a phone next time to see if it suits you.

Alerts do not work on one site collection - Alerts have EventTypeBitmask of -1 - do you think this is the problem

I have a farm with approx 200 site collections in it.
We did recently move sites from one farm to another. All other site collection alerts work, Yet I have one site collection that just does not send alerts.
Things I have done to attempt to get them to work:
1. Turn Alerts off and back on
stsadm -o setproperty -url "sitecollectionurl" -pn Alerts-enabled -pv False
stsadm -o setproperty -url "sitecollectionurl" -pn Alerts-enabled -pv True
2. Update the alerts template
stsadm -o updatealerttemplates -url "sitecollectionurl" -f "c:\program files\path to \AlertTemplates.xml
3. Update all the siteurl properties of all alerts to the correct url
4. update all the mobilurl propties of all alerts to the correct url
5. updated all the Alert.Titles
None of these have worked for me to get the alerts to start working
The only thing I see different is this EventTypeBitMask property.
Does anyone have any other suggestions to get alerts working on this site collection?
Thank you for any help
[email protected]

Hi,
Whether all of the user can’t receive alert email in this site collection.
Check whether the "Immediate Alerts" time job is enabled for your web application.
Try to do restart SharePoint Timer services and IISReset.
Here are two articles about troubleshooting SharePoint alerts not working, you can use as a reference:
http://www.sharepointdiary.com/2012/02/sharepoint-alerts-not-working-troubleshooting-checklist.html#ixzz2aSvOz3hB
http://blogs.technet.com/b/steve_chen/archive/2009/11/20/alerts-in-sharepoint-troubleshooting-moss-wss.aspx
Besides, here is a similar post, you can take a look at:
https://social.technet.microsoft.com/Forums/en-US/895a5612-9237-4d66-8cb3-37e7eefe8dbb/alerts-not-working-for-a-single-site-collection?forum=sharepointadminlegacy
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

When I enter a website, FireFox used to auto login and password. Now is does NOT. If I choose remember me check box, the website remembers me but I still have to enter a password. I think this is a problem created with website programming.

The problem is with most websites but not all. When I try to login to this website to ask this question, I have recorded 3 logins. Only one works, but that is a different problem. The websites used to automatically login and suddenly don't. I believe the problem is a change in programming for the website programmers. I found a solution (not a viable one) previously here that is supposed to remember login and password through a laborious process, but that is really cumbersome and doesn't always work either. Today I cannot find that process to try it. I am trying to login to ATT website which was just changed.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?

Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

Sorry but I think this wrong, I know that in Colombia there and two of the three operators already have 4G/LTE networks, what happens is that the iPhone should be expected to send the update software for computers that have this tercnologia activate them,

sorry but I think this wrong, I know that in Colombia there and two of the three operators already have 4G/LTE networks, what happens is that the iPhone should be expected to send the update software for computers that have this tercnologia activate them, that my Iphone or receiving 5 supports 4G LTE,
Thank you for your attention

Apple needs to test the carrier if they offer LTE as expected.
If your country/carrier is not on the list then there's no LTE on your iPhone.
http://www.apple.com/iphone/LTE/
It's between the your carrier and Apple. There's nothing you can do except feedback to Apple:
http://www.apple.com/feedback/iphone.html

I think this is a bug with rendering a string to a graphics2d

Hiya,
The following lines of code create the rendering error I am experiencing, to which I have tested on several computers.
BufferedImage bi=new BufferedImage(100,100,BufferedImage.TYPE_INT_ARGB);
Graphics2D g2d=bi.createGraphics();
g2d.setColor(new Color(1f,0f,0f,0.5f));
g2d.fillRect(0,0,100,100);
RenderingHints renderingHints=new RenderingHints(RenderingHints.KEY_ANTIALIASING,RenderingHints.VALUE_ANTIALIAS_ON);
RenderingHints rh=new RenderingHints(RenderingHints.KEY_TEXT_ANTIALIASING,RenderingHints.VALUE_TEXT_ANTIALIAS_ON);
renderingHints.add(rh);
rh=new RenderingHints(RenderingHints.KEY_ALPHA_INTERPOLATION,RenderingHints.VALUE_ALPHA_INTERPOLATION_QUALITY);
renderingHints.add(rh);
g2d.setRenderingHints(renderingHints);
g2d.setFont(new Font("Lucida",Font.BOLD,14));
g2d.setColor(Color.BLACK);
g2d.drawString("SQOWTGBC",10,30);
When the destination image has an alpha of 1 the text is rendered with the correct antialiasing. However, in this example where the alpha is 0.5 the text is rendered with unwanted artifacts.
[http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash4/269344_590137484330481_704825569_n.jpg]
This image has JPG artifacts but the unwanted rendering artifacts are still visible (ie the brighter edges)
I am wondering if this is not in fact an error but the intended result. If so, how to I configure the graphics object to render the antialiased text without the artifacts?
I could not find where to submit a bug on the oracle website for the life of me so maybe if someone would like to explain how this is achieved I will be very grateful.
Penny
x
I have spent several hours trying to find if this has been reported as a bug or if there is a solution posted online but to no avail.
Edited by: 995038 on Mar 20, 2013 5:32 AM
Edited by: 995038 on Mar 20, 2013 5:33 AM
Edited by: 995038 on Mar 20, 2013 5:36 AM

I have made a work around for the moment.
This work around uses a BufferedImage to render the antialiased text first which does not create the artefacts and then draw the image of the text to where the text should appear. I dont think this is an acceptable solution because in the case where there could be 1000s of TextLayout objects the increased overhead would be unacceptable.
private void drawTextLayout(Graphics2D g2d,float x,float _y) {
Rectangle r=_g2d.getClipBounds();
bufferG2D.translate(r.x,r.y);
Composite c=bufferG2D.getComposite();
bufferG2D.setComposite(clearComposite);
bufferG2D.fill(r);
bufferG2D.setComposite(c);
textLayout.draw(bufferG2D,_x,_y);
bufferG2D.translate(-r.x,-r.y);
_g2d.drawImage(buffer,r.x,r.y,null);
the BufferedImage of bufferG2D would need to be large enough to cater for any size of text to be rendered to which I believe the size should be set to the screen size. This solution requires that there always be a _g2d clip assigned.
Regards
Penny

Do you think this is the logic board?

Ok, So I'm sitting in psychology and the computer freezes and the video becomes distorted (like the Photoshop wind filter) little lines going everywhere. I then held the power button and it shut down. Then I tried to boot it, but nothing.
Later it works OK, but do you think this is the logic board?
Will it get worse?
And finally, Do you think I am eligible for a logic board replacement?
Serial: UV3283xxxxx

Gah, Sorry forgot to mention in the message i have an ibook.
You didn't need to say that you have an iBook because it says it in your system configuration at the bottom of the screen I just thought that I'd mention my experience because it was a bit similar to yours.
I definately think that it is worth getting it checked out. Maybe just drop it off at an Apple store and ask them to do some tests on it to see if the logic board does have a problem. If you are eligable for the logic board replacement then it's definately worth looking into. Often, intermittent problems like this can turn into more serious ones like mine.
I personally would not leave it down to chance.
Good luck
<hr>Sam

How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

You have to clear saved password for this page:
# Open you login page (where you have to enter username and password).
# Right click on page and select '''Page Info''' form context menu.
# On last tab ('''Security''') there is '''View saved passwords''' button, click it and delete all saved passwords for this page.
# Also clear all related cookies (just in case) there is button for this next to first one.

Mid 2010 MacBook pro took a keyboard spill. It still works but display is sooo dark - like no backlight. I think this is an LED screen. Does anyone know the fix for this?

Hi all... My mid 2010 MacBook Pro took a keyboard spill. It still works but the display is very very dark. A faint image can only be seen at an angle in very bright light. I think this model has an LED screen. Can anyone please tell me what the fix for this is? Thank you sooooo much!
< Email Edited By Host >

Spill Cleaning
Some liquid has just spilled into your Mac. What should you do?
Do
Immediately shut down the computer and unplug the power cord.
Remove the computer's battery (if you can)
Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
Note what was spilled on your Mac.
Bring the computer into an Apple store or AASP as soon as possible.
Don't
Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
Don't shake the computer (this will only spread the liquid around).
Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to ICloud Drive or not? Has anyone done this? Is it awesome? I need to be able to access my resume from phone. I think this will help me achieve this.am i right?

I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to ICloud Drive or not? Has anyone done this? Is it awesome? I need to be able to access my resume from phone. I think this will help me achieve this? Am i right? Is there any body out there right now that could help me? I'm thinking about going from 8.1.3 to I guess yosemite? Or is that for Mac computers? I don't understand the language entirely on the help page. Anyone's straight forward and easy stepped advice would be much appreciated. I'm so frustrated and I need a job so badly! Drowning in debt. Any help appreciated!
Thanks,
A

You're a Windows user, correct? If so, read here:
http://support.apple.com/kb/DL1455

How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks

You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser.

5800 in a Test Room I Think this is a problem

Similar Messages

Maybe you are looking for