5800 is dead (Won't boot)

Hi guys,
I've had my Nokia 5800 for about 2 weeks now and suddenly it wont boot up. When I went to work in the morning it had 1 bar of battery and by 3pm it was off and completely dead. I charged it all night and it's still as dead this morning. When I press the power button the screen backlight lights up for as long as I keep my finger pressed down, but as soon as I take my finger off it's blank. No matter how long I hold it it doesnt do anything else.
I have tried taking the battery out for 10 minutes + and reinstalling and it didn't work. I'm at a loss!
Any help would be appreciated.
Thanks 

You could try starting up with the good 'ole 3 finger salute.  Hold down red + green + camera buttons while starting up.  If it does work (no guarantee), note that your entire phone memory will be wiped clean with a fresh firmware install.  Your memory card will be untouched though.
Ravi
edit: oops sorry I just saw that you already treat reinstalling.  Sorry!
Message Edited by ravidavi on 10-Jul-2009 04:30 PM

Similar Messages

  • Iphone 4s won't boot on and itunes doens't detect it when on battery. Plug it in and Apple logo appear then disappear, try to recover, but there's a 1602 error. Is it dead?

    Iphone 4s won't boot on and itunes doens't detect it when on battery. Plug it in and Apple logo appear then disappear, try to recover, but there's a 1602 error. Is it dead?

    Its weird, when I plug it into wall AC, I was able to boot into the home screen, but there's wifi cant turn on. Plug out the phone turn off immediately. I tried to jailbreak it with snowbreeze because someone has the same problem with his iphone 4, but snowbreeze doens't work with iphone 4s.

  • Iphone 4 Just went dead.  Won't boot up. What do I do?

    Iphone 4 Just went dead.  Won't boot up. What do I do?

    nope...
    i'm heading to Genius Bar now...thinking that i need to do the fire wire target thing...i just don't have anything to target to...

  • PB Screen Dead? Won't Boot, But Second Monitor Will

    My 7-year-old G4 17" Powerbook won't boot via it's onboard LCD display...but a second monitor will. I'm assuming the monitor should be replaced, or perhaps a video card?
    What's typically the problem associated with these symptoms?
    Thanks for any help.
    Terry D

    Step one is to boot the computer and shine a light through the "Apple" window on the back of the display and see if you see anything happening on the display.  This may be a little tricky, but the best time to do this is during the boot process when usually things happen in the center of the screen.  (I am assuming that you have already tried the brightness control, as I have had problems with the TiBooks going to minimum brightness on boot for some reason as yet unknown to me, though I can still at least see some detail on the screen.)
    Now, if the display is actually changing when you are providing an artificial backlight, then you are maybe in luck a little bit, since it is likely that the so-called Inverter Board has crapped out.  These can be replaced with varying degrees of difficulty from almost trivial to a little involved.  Find your machine here on the iFixit site for more information and a guide to changing the board.
    The other possibility is that the fluorescent panel panel has itself died, which would require a much more involved repair and probably would not be worth it.

  • Mac Mini won't boot up, just beeps once every 4 seconds. Is it dead?

    Mac Mini died, now it won't boot up. It just sits and beeps at me once every four seconds with the power light flashing once every four seconds also. If i shut it off, can't get it to turn on again without unplugging it. also, no boot sound. Time for a new one?

    Sounds like a RAM problem:
    1 tone, repeating every 5 seconds: This indicates no RAM is installed.
    Try reseat8ng the RAM. Finde you Mac here for how to access the RAM
    Or you can
    Make an appointment at the Genius Bar of an Apple store. No warranty required
      Apple Retail Store - Genius Bar

  • Satellite m300 won't boot! please help!

    Hi,
    I've got a bit of an issue here.. I have a Satellite m300.. a white one..
    and it won't boot... I've had this very issue before but it turned out to be an external USB HDD that stopped it from booting up but now even with everything removed it still won't boot.
    And it was fine until yesterday, it just gave up.. I am away from home for work so I have all the work stuff and unfortunately without my recovery cd, but my guess is that it won't even read it..
    So this is what happens..
    turn on..
    all light come on.. including power and all the white lights around the keypad..
    and then maybe 5 sedconds later caplock and numlock(?) green lights flash..
    then it's a dead still.. no HDD activities or sound.. just dead quite..
    the screen remains black blank through out..
    it seems to get stuck here before reaching the post screen.
    i thought the power button usually took more than just a push to turn off? it instantly swithces off with a single push of the power button..
    I think this laptop is like on sleep or something and can't seem to wak up.. maybe?
    And it has vista.
    Please help.. I have some important work files I need to recover at least before formatting..
    and that has to wait till I get home which won't be for a month or so..
    which also lets me take it back for warranty as well..
    any help appreciated!!!
    cheers,
    Min

    Quote
    Originally posted by syar2003
    If running a LCD display with DVI connection , try to hook it up with
    an analog VGA cable.
    Can also be that the motherboard fails to initialize the vga AGP card.
    Turn off all power incl. AC .
    Disconnect all devices from motherboard : AGP/memory/drives/floppy/USB/PCI cards etc. take out the 20pin & 4pin PSU connectors and reset the motherboards
    cmos .
    Assemble PSU connectors ,only one DIMM module and graphics card and turn it on and se if you get a post .
    Just removed all components. I reset the CMOS. I then reconnected the 20pin and 4pin, 1 stick ram, and the video card (no ide devices, no mouse, keyboard cd drives) and the monitor doesn't show up. I also tried another monitor so it isn't the monitor.
    Could it have a bad AGP port?
    Any other suggestions? I am thouroughly stumped. Also the power and reset buttons don't work no matter what configuaration I put the front panel connectors in. The Power LED is lit up and it doesn't work and the reset light is off and it doesn't work.
    Also noticed one of my fans connected to one of the two other fan pins on the motherboard isn't working.
    What a nightmare.

  • Ms-6183 won't boot after storm

    Following a recent thunderstorm, my ms-6183 system no longer boots.  After powering on, I get the normal single beep, fans, hard drives, etc start up, but screen stays blank (no signal message).  There is no HDD activity, and it won't boot from floppy or CD.  Power light is on.  It's like the BIOS is not being activated, but that single beep confuses me.  I thought that meant that the POST was successful.  I suspect the mainboard has blown, but is it likely to be something more straightforward. I have a surge protector in place for the power, but I think it's been hit through the broadband modem, because that is dead too.  Is it likely that the mainboard has been blown via the USB connection to the modem.  I've tried taking the USB card out but still no good.

    Hi john123
    If you make a signature of your hardware (In PROFILE next to where you login) it will help to see what you have when answering questions.
    Yes you do it to the board.. You have to take the side off.
    Find your manual and have a read, or look it up on line  For best results OR
    Remove the powerlead.
    You can clear the cmos by shorting 2-3pin while the system is off. Then return to 1-2 position. You will know if you have done it correctly because the clock and date will be wrong.
    The 3pins that you are looking for should be somewhere near the battery. It will be 3pins in a row, 2 of them will be covered with a rectange shaped bit of plastic. ( it will be on pin 1-2 now, so pin 3 is the one that you can see)Make a note of its position and move it to cover 2-3 pin. leave to 20 seconds then put it back as it was.
    If in any doubt take a digi photo of your boards layout before you start any work on it then if all else fails you know exactly where the plugs and leads went.
    If you cannot find a manual, removing the battery will also do the same job. BUT it is best to reset with the jumper.  
    If you do not have a anti static wrist band touch the case to remove any static from yourself before touching any parts inside your pc.
    Good luck. Hope this helps.

  • Mac Pro won't boot after forced shutdown

    Hi all, hopefully someone will be able to help with this.
    This is a Mac Pro (don't have the exact spec right now, but will have later, I think it's a dual), which is used to run ProTools. It has no internet or network connections.
    It's running OS X 10.5.8 and has been for quite a while with no problems. Nothing new has been installed recently (hardware or software).
    The other night it was playing back a ProTools session and recording a mix of the result when it started behaving strangely. When ProTools is recording, it creates a waveform display of the recording as it goes, and this suddenly started being corrupted by what appeared to be bits of a photograph or video image. The owner tried to hit "Stop", but nothing would work. Mouse still moved, but no button response, keyboard shortcuts ineffective, and Force Quit did nothing, so in the end he had to kill it by holding down the power button.
    Since then it won't boot normally, though it will boot into Safe Mode with no problem.
    On a "normal" startup, it powers up, goes through the grey screen/Apple logo/spinning thing stage on the left monitor, then that one goes blue, then both monitors go blue for a few seconds and finally both screens go black, with a mouse pointer in the top left of the left screen. You can move the mouse all over both screens (though if you wait a few seconds it leaves a copy of the pointer in the top left), but that's as far as it gets. Disk activity continues for a while (maybe a minute or so) after the screens go to black, and the spinning rainbow thing comes and goes, but it then seems to give up.
    Here's what I've tried so far:
    Boot into Safe Mode - no problem
    Verify disk using Disk Utility - no problem
    Repair permissions - loads of screwed up stuff, all with "permission should be ?-----" . Repair didn't work. Finally fixed these by running the 10.5.8 combo updater twice (known issue with this updater), then repairing again. Permissions now come up clean.
    Cleared all caches etc. using Cocktail - slight improvement. Before this it was sticking on the one blue screen stage.
    Got rid of a few corrupt preference files using Cocktail (all last modified years ago) - no difference.
    Reset PRAM and MBC - no difference
    Tried booting with everything disconnected except one screen, keyboard and mouse - no difference.
    I'm going over later to see if reseating cards/removing memory etc. will make any difference, and to see if it will fire up fom it's original 10.4.? CD.
    Beyond that, I'm kind of out of ideas, so I figured I'd see if anyone else had any!
    Below is (what I think!) is the relevant bit of the log file, showing a failed boot, forced power off and reboot intoSafe Mode.
    Any clues to corrupt files etc. in there?
    Brian
    Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiIO.kext appears to be loadable
    Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiIO.kext
    Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiIO.kext is already loaded
    Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiDal.kext appears to be loadable
    Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiDal.kext
    Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiDal.kext is already loaded
    Jan 17 19:19:30 localhost kernel[0]: npvhash=4095
    Jan 17 19:19:28 localhost com.apple.launchctl.System[2]: BootCacheControl: could not open /var/db/BootCache.playlist: No such file or directory
    Jan 17 19:19:28 localhost com.apple.launchctl.System[2]: BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
    Jan 17 19:19:29 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    Jan 17 19:19:29 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    Jan 17 19:19:29 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    Jan 17 19:19:29 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
    Jan 17 19:19:30 localhost kextd[10]: 439 cached, 0 uncached personalities to catalog
    Jan 17 19:19:30 localhost kernel[0]: hi mem tramps at 0xffe00000
    Jan 17 19:19:30 localhost kernel[0]: PAE enabled
    Jan 17 19:19:30 localhost kernel[0]: 64 bit mode enabled
    Jan 17 19:19:30 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
    Jan 17 19:19:30 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Jan 17 19:19:30 localhost kernel[0]: vm_page_bootstrap: 714269 free pages and 72163 wired pages
    Jan 17 19:19:30 localhost kernel[0]: mig_table_max_displ = 79
    Jan 17 19:19:30 localhost kernel[0]: Error: Couldn't read XML property list for multikext archive entry 115.
    Jan 17 19:19:30 localhost kernel[0]: XML parse error: OSUnserializeXML: syntax error near line 1
    Jan 17 19:19:30 localhost kernel[0]: .
    Jan 17 19:19:30 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    Jan 17 19:19:30 localhost kernel[0]: Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=6 Enabled
    Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=7 Enabled
    Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
    Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
    Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
    Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
    Jan 17 19:19:30 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    Jan 17 19:19:30 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    Jan 17 19:19:30 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Jan 17 19:19:30 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    Jan 17 19:19:30 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    Jan 17 19:19:30 localhost kernel[0]: calling mpo_policy_init for mb
    Jan 17 19:19:30 localhost kernel[0]: Seatbelt MACF policy initialized
    Jan 17 19:19:30 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    Jan 17 19:19:30 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Jan 17 19:19:31 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Jan 17 19:19:31 localhost kernel[0]: MAC Framework successfully initialized
    Jan 17 19:19:31 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
    Jan 17 19:19:31 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Jan 17 19:19:31 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    Jan 17 19:19:31 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Jan 17 19:19:31 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    Jan 17 19:19:31 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.AppleIntelCPUPowerManagement: Enabling legacy HPET check
    Jan 17 19:19:31 localhost kernel[0]: mbinit: done
    Jan 17 19:19:31 localhost kernel[0]: Security auditing service present
    Jan 17 19:19:31 localhost kernel[0]: BSM auditing present
    Jan 17 19:19:31 localhost kernel[0]: rooting via boot-uuid from /chosen: A3A529FC-62F4-3CBC-91C6-E6C6DC1F954B
    Jan 17 19:19:31 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Jan 17 19:19:31 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe92f662; max speed s800.
    Jan 17 19:19:31 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3250820AS P Media/IOGUIDPartitionScheme/Customer@2
    Jan 17 19:19:31 localhost kernel[0]: BSD root: disk0s2, major 14, minor 5
    Jan 17 19:19:31 localhost kernel[0]: Jettisoning kernel linker.
    Jan 17 19:19:31 localhost kernel[0]: Resetting IOCatalogue.
    Jan 17 19:19:31 localhost kernel[0]: PXS1: family specific matching fails
    Jan 17 19:19:31 localhost kernel[0]: Matching service count = 2
    Jan 17 19:19:31 localhost kernel[0]: Matching service count = 3
    Jan 17 19:19:31: --- last message repeated 4 times ---
    Jan 17 19:19:31 localhost kernel[0]: Matching service count = 4
    Jan 17 19:19:31 localhost kernel[0]: MacPro1,1: stalling for module
    Jan 17 19:19:31 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
    Jan 17 19:19:32 localhost kernel[0]: Matching service count = 1
    Jan 17 19:19:32 localhost kernel[0]: AppleTyMCEDriver::probe(MacPro1,1)
    Jan 17 19:19:32 localhost kernel[0]: AppleTyMCEDriver::probe fails
    Jan 17 19:19:32 localhost kernel[0]: Previous Shutdown Cause: 3
    Jan 17 19:19:33 localhost kernel[0]: Probing MOTU Driver
    Jan 17 19:19:33 localhost kernel[0]: IOKit version is "Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386"
    Jan 17 19:19:33 localhost kernel[0]: uhcim Not using bug fix
    Jan 17 19:19:33 localhost kernel[0]: GetDevInfoForSubclass interfacesubclass 0 forUHCI 0
    Jan 17 19:19:34 localhost kernel[0]: NVDANV40HAL loaded and registered.
    Jan 17 19:19:34 localhost kernel[0]: PXS1: family specific matching fails
    Jan 17 19:19:34: --- last message repeated 3 times ---
    Jan 17 19:19:34 localhost kernel[0]: Matching service count = 0
    Jan 17 19:19:35 localhost bootlog[65]: BOOT_TIME: 1326824366 0
    Jan 17 19:19:36 localhost rpc.statd[47]: statd.notify - no notifications needed
    Jan 17 19:19:37 localhost fseventsd[56]: bumping event counter to: 0x28c7 (current 0x0) from log file '0000000000000665'
    Jan 17 19:19:39 localhost DirectoryService[61]: Launched version 5.7 (v514.25)
    Jan 17 19:19:42 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[52]: Login Window Application Started -- Threaded auth
    Jan 17 19:19:44 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9c
    Jan 17 19:19:44 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9d
    Jan 17 19:19:45 localhost com.paceap.pacesupport[68]: kextload: /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns/PACESupportL eopard.kext loaded successfully
    Jan 17 19:19:49 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en0 called by enableHardware() -- 
    Jan 17 19:19:49 localhost mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:49)[51]: starting
    Jan 17 19:19:50 localhost /usr/sbin/ocspd[94]: starting
    Jan 17 19:19:52 localhost kextd[10]: writing kernel link data to /var/run/mach.sym
    Jan 17 19:19:54 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en1 called by enableHardware() -- 
    Jan 17 19:19:54 *****-****-computer configd[63]: setting hostname to "*****-****-computer.local"
    Jan 17 19:19:56 *****-****-computer org.ntp.ntpd[42]: Error : nodename nor servname provided, or not known
    Jan 17 19:19:56 *****-****-computer ntpdate[106]: can't find host time.euro.apple.com
    Jan 17 19:19:56 *****-****-computer ntpdate[106]: no servers can be used, exiting
    Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: PACESupport - launchd already started us
    Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiIO.kext appears to be loadable
    Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: kextload: loading extension /System/Library/Extensions/DigiIO.kext
    Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiIO.kext is already loaded
    Jan 17 19:19:57 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiDal.kext appears to be loadable
    Jan 17 19:19:57 *****-****-computer com.apple.SystemStarter[45]: kextload: loading extension /System/Library/Extensions/DigiDal.kext
    Jan 17 19:19:57 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiDal.kext is already loaded
    Jan 17 19:19:59 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception!  status = 0xffff info32 = 0x2 = Fifo: SW Method Error
    Jan 17 19:19:59 *****-****-computer kernel[0]: 0000000b
    Jan 17 19:19:59 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception!  status = 0xffff info32 = 0x2 = Fifo: SW Method Error
    Jan 17 19:19:59 *****-****-computer kernel[0]: 0000000b
    Jan 17 19:19:59 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception!  status = 0xffff info32 = 0x2 = Fifo: SW Method Error
    Jan 17 19:19:59 *****-****-computer kernel[0]: 0000000b
    Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception!  status = 0xffff info32 = 0x2 = Fifo: SW Method Error
    Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
    Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception!  status = 0xffff info32 = 0x2 = Fifo: SW Method Error
    Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
    Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception!  status = 0xffff info32 = 0x2 = Fifo: SW Method Error
    Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
    Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception!  status = 0xffff info32 = 0x2 = Fifo: SW Method Error
    Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
    Jan 17 19:20:09 *****-****-computer loginwindow[52]: Login Window Started Security Agent
    Jan 17 19:20:15 *****-****-computer com.apple.launchd[1] ([0x0-0x5005].com.dantz.RetroRunSL[123]): Stray process with PGID equal to this dead job: PID 125 PPID 1 RetroRunSL
    Jan 17 19:23:49 *****-****-computer com.apple.firmwaresyncd[57]: kextload: /System/Library/Extensions/msdosfs.kext loaded successfully
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** /dev/rdisk1s2
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Root file system
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Journaled HFS Plus volume.
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Extents Overflow file.
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Catalog file.
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking multi-linked files.
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Catalog hierarchy.
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Extended Attributes file.
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking volume bitmap.
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking volume information.
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** The volume Macintosh HD appears to be OK.
    Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ***** FILE SYSTEM WAS MODIFIED *****
    Jan 17 19:28:20 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    Jan 17 19:28:20 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    Jan 17 19:28:20 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    Jan 17 19:28:20 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
    Jan 17 19:28:21 localhost kernel[0]: npvhash=4095
    Jan 17 19:28:20 localhost kextd[9]: safe boot detected
    Jan 17 19:28:21 localhost kernel[0]: hi mem tramps at 0xffe00000
    Jan 17 19:28:20 localhost kextd[9]: safe boot; invalidating extensions caches
    Jan 17 19:28:21 localhost kernel[0]: PAE enabled
    Jan 17 19:28:21 localhost kernel[0]: 64 bit mode enabled
    Jan 17 19:28:21 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
    Jan 17 19:28:21 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Jan 17 19:28:21 localhost kernel[0]: vm_page_bootstrap: 508650 free pages and 277782 wired pages
    Jan 17 19:28:21 localhost kernel[0]: mig_table_max_displ = 79
    Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=6 Enabled
    Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=7 Enabled
    Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
    Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
    Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
    Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
    Jan 17 19:28:21 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    Jan 17 19:28:21 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    Jan 17 19:28:21 localhost kernel[0]: calling mpo_policy_init for mb
    Jan 17 19:28:21 localhost kernel[0]: Seatbelt MACF policy initialized
    Jan 17 19:28:21 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    Jan 17 19:28:21 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    Jan 17 19:28:21 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    Jan 17 19:28:21 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Jan 17 19:28:21 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Jan 17 19:28:21 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Jan 17 19:28:21 localhost kernel[0]: MAC Framework successfully initialized
    Jan 17 19:28:21 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
    Jan 17 19:28:21 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    Jan 17 19:28:21 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    Jan 17 19:28:21: --- last message repeated 1 time ---
    Jan 17 19:28:21 localhost kernel[0]: AppleIntelCPUPowerManagement: Enabling legacy HPET check
    Jan 17 19:28:21 localhost kernel[0]: mbinit: done
    Jan 17 19:28:21 localhost kernel[0]: Security auditing service present
    Jan 17 19:28:21 localhost kernel[0]: BSM auditing present
    Jan 17 19:28:21 localhost kernel[0]: rooting via boot-uuid from /chosen: A3A529FC-62F4-3CBC-91C6-E6C6DC1F954B
    Jan 17 19:28:21 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Jan 17 19:28:21 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe92f662; max speed s800.
    Jan 17 19:28:21 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3250820AS P Media/IOGUIDPartitionScheme/Customer@2
    Jan 17 19:28:21 localhost kernel[0]: BSD root: disk1s2, major 14, minor 5
    Jan 17 19:28:21 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 23181312 to: 122368 (joffset 0x746000)
    Jan 17 19:28:21 localhost kernel[0]: jnl: unknown-dev: journal replay done.
    Jan 17 19:28:21 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
    Jan 17 19:28:21 localhost kernel[0]: HFS: Removed 4 orphaned unlinked files or directories 
    Jan 17 19:28:21 localhost kernel[0]: Jettisoning kernel linker.
    Jan 17 19:28:26 localhost bootlog[36]: BOOT_TIME: 1326824767 0
    Jan 17 19:28:26 localhost fseventsd[27]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (330 139 558)
    Jan 17 19:28:27 localhost rpc.statd[18]: statd.notify - no notifications needed
    Jan 17 19:28:27 localhost fseventsd[27]: log dir: /.fseventsd getting new uuid: 07B57D5F-5A7E-483F-8FBE-40E8DF7E6E23
    Jan 17 19:28:32 localhost DirectoryService[32]: Launched version 5.7 (v514.25)
    Jan 17 19:28:32 localhost DirectoryService[32]: Improper shutdown detected
    Jan 17 19:28:38 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9c
    Jan 17 19:28:38 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9d
    Jan 17 19:28:43 localhost kernel[0]: Resetting IOCatalogue.
    Jan 17 19:28:43 localhost kextd[9]: 0 cached, 291 uncached personalities to catalog
    Jan 17 19:28:44 localhost kernel[0]: PXS1: family specific matching fails
    Jan 17 19:28:44 localhost kernel[0]: Matching service count = 2
    Jan 17 19:28:45 localhost kernel[0]: Previous Shutdown Cause: 3
    Jan 17 19:28:45 localhost mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:49)[22]: starting
    Jan 17 19:28:46 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started -- Threaded auth
    Jan 17 19:28:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
    Jan 17 19:28:50 localhost kernel[0]: PXS1: family specific matching fails
    Jan 17 19:28:50 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en0 called by enableHardware() -- 
    Jan 17 19:28:52 localhost kernel[0]: PXS1: family specific matching fails
    Jan 17 19:28:52 localhost kernel[0]: Matching service count = 0
    Jan 17 19:28:54 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en1 called by enableHardware() -- 
    Jan 17 19:28:54 *****-****-computer configd[34]: setting hostname to "*****-****-computer.local"
    Jan 17 19:28:56 *****-****-computer org.ntp.ntpd[13]: Error : nodename nor servname provided, or not known
    Jan 17 19:28:56 *****-****-computer ntpdate[68]: can't find host time.euro.apple.com
    Jan 17 19:28:56 *****-****-computer ntpdate[68]: no servers can be used, exiting
    Jan 17 19:28:56 *****-****-computer com.apple.ATSServer[67]: FODBCheck: New annex file created
    Jan 17 19:28:57 *****-****-computer /usr/sbin/ocspd[73]: starting
    Jan 17 19:29:01 *****-****-computer kextd[9]: writing kernel link data to /var/run/mach.sym
    Jan 17 19:29:04 *****-****-computer loginwindow[23]: Login Window Started Security Agent
    Jan 17 19:29:05 *****-****-computer fseventsd[27]: event logs in /Volumes/DATA DRIVE/.fseventsd out of sync with volume. destroying old logs. (63 0 598)
    Jan 17 19:29:05 *****-****-computer fseventsd[27]: log dir: /Volumes/DATA DRIVE/.fseventsd getting new uuid: 0E7FBB62-F55F-413D-970B-FB402543BF2D
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: PACESupport - launchd already started us
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiIO.kext appears to be loadable
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiIO.kext
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: /System/Library/Extensions/DigiIO.kext loaded successfully
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: sending personalities to kernel:
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/IOStorageFamily.kext:
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOFDiskPartitionScheme
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOMediaBSDClient
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOGUIDPartitionScheme
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOAppleLabelScheme
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOBlockStorageDriver
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOApplePartitionScheme
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/IOPCIFamily.kext:
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-Name
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-i386
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-PCI
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/DigiIO.kext:
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         DigiIO
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: sending 10 personalities to the kernel
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: matching started for /System/Library/Extensions/DigiIO.kext
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiDal.kext appears to be loadable
    Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiDal.kext
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: /System/Library/Extensions/DigiDal.kext loaded successfully
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: sending personalities to kernel:
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/IOPCIFamily.kext:
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-Name
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-i386
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-PCI
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/DigiDal.kext:
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIIPLXDevice
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinRev2Farm
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinFarm
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinEngine
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceHiNTHB2
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceDEC21154
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIFarm
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDevicePericom8154
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         DigidesignGeneral
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIIFarm
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinRev2Engine
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIEngine
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDevicePLXPCIExpress
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         MotorolaPresto
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIPLXDevice
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceDEC21154BE
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceHiNTHB4
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIIEngine
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: sending 21 personalities to the kernel
    Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: matching started for /System/Library/Extensions/DigiDal.kext
    Jan 17 19:29:11 *****-****-computer com.apple.launchd[1] ([0x0-0x4004].com.dantz.RetroRunSL[83]): Stray process with PGID equal to this dead job: PID 95 PPID 1 RetroRunSL
    Jan 17 19:29:37 *****-****-computer com.apple.dyld[10]: update_dyld_shared_cache[10] regenerated cache for arch=i386
    Jan 17 19:31:09 *****-****-computer authorizationhost[82]: MechanismInvoke 0x1d2de70 retainCount 2
    Jan 17 19:31:09 *****-****-computer SecurityAgent[92]: MechanismInvoke 0x5b31950 retainCount 1
    Jan 17 19:31:09 *****-****-computer SecurityAgent[92]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
    Jan 17 19:31:10 *****-****-computer SecurityAgent[92]: MechanismDestroy 0x5b31950 retainCount 1
    Jan 17 19:31:10 *****-****-computer authorizationhost[82]: MechanismDestroy 0x1d2de70 retainCount 2
    Jan 17 19:31:10 *****-****-computer loginwindow[23]: Login Window - Returned from Security Agent
    Jan 17 19:31:10 *****-****-computer loginwindow[23]: USER_PROCESS: 23 console
    Jan 17 19:31:10 *****-****-computer com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[79]): Exited: Terminated
    Jan 17 19:31:10 *****-****-computer com.apple.launchctl.Aqua[110]: launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/RemoteUI.plist
    Jan 17 19:31:10 *****-****-computer com.apple.launchd[108] (org.x.startx): Unknown key for boolean: EnableTransactions
    Jan 17 19:31:10 *****-****-computer /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer[118]: (-3230) Cannot use ATS Persistent Store - switching to old FODB cache code
    Jan 17 19:31:13 *****-****-computer /System/Library/CoreServices/coreservicesd[43]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(***** ***'s Public Folder) returned -14135
    Jan 17 19:31:18 *****-****-computer /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 22]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
    Jan 17 19:31:18 *****-****-computer /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 22]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
    Jan 17 19:32:21 *****-****-computer Cocktail[129]: Cocktail 4.7 launched.
    Jan 17 19:32:24 *****-****-computer com.apple.FolderActions.enabled[141]: launchctl: Error unloading: com.apple.FolderActions.folders
    Jan 17 19:32:32 *****-****-computer authexec[146]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer Cocktail[129]: ***** *** authenticated.
    Jan 17 19:32:32 *****-****-computer authexec[149]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[151]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[153]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[155]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[157]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[159]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[161]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[163]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[165]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[167]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[169]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[171]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[173]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[175]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[177]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:32 *****-****-computer authexec[179]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:38 *****-****-computer defaults[184]: \nThe domain/default pair of (com.apple.spotlight, DictionaryLookupEnabled) does not exist
    Jan 17 19:32:38 *****-****-computer defaults[185]: \nThe domain/default pair of (com.apple.spotlight, CalculationEnabled) does not exist
    Jan 17 19:32:38 *****-****-computer defaults[186]: \nThe domain/default pair of (com.apple.systempreferences, TMShowUnsupportedNetworkVolumes) does not exist
    Jan 17 19:32:38 *****-****-computer authexec[188]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:38 *****-****-computer authexec[190]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:38 *****-****-computer defaults[190]: \nThe domain/default pair of (/System/Library/LaunchDaemons/com.apple.backupd-attach, Disabled) does not exist
    Jan 17 19:32:38 *****-****-computer defaults[191]: \nThe domain/default pair of (com.apple.TimeMachine, DoNotOfferNewDisksForBackup) does not exist
    Jan 17 19:32:38 *****-****-computer defaults[192]: \nThe domain/default pair of (com.apple.finder, _FXShowBackgroundAnimation) does not exist
    Jan 17 19:32:38 *****-****-computer authexec[194]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:39 *****-****-computer authexec[204]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:39 *****-****-computer defaults[204]: \nThe domain/default pair of (com.apple.loginwindow, StartupDelay) does not exist
    Jan 17 19:32:39 *****-****-computer authexec[206]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:39 *****-****-computer defaults[206]: \nThe domain/default pair of (com.apple.loginwindow, Kiosk) does not exist
    Jan 17 19:32:42 *****-****-computer defaults[207]: \nThe domain/default pair of (com.apple.desktopservices, DSDontWriteNetworkStores) does not exist
    Jan 17 19:32:47 *****-****-computer authexec[213]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:32:48 *****-****-computer authexec[215]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:44:05 *****-****-computer Cocktail[129]: System log (/private/var/log/system.log) has been saved to /Users/********/Library/Logs/System LOg 2.log.
    Jan 17 19:44:45 *****-****-computer fseventsd[27]: log dir: /Volumes/NO NAME/.fseventsd getting new uuid: 2DADE658-7648-47A4-A16F-8B77B56B575C
    Jan 17 19:46:33 *****-****-computer Cocktail[246]: Cocktail 4.7 launched.
    Jan 17 19:46:34 *****-****-computer [0x0-0x1b01b].com.apple.systemevents[254]: com.apple.FolderActions.enabled: Already loaded
    Jan 17 19:46:36 *****-****-computer authexec[257]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:36 *****-****-computer Cocktail[246]: ***** *** authenticated.
    Jan 17 19:46:36 *****-****-computer authexec[260]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:36 *****-****-computer authexec[262]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:36 *****-****-computer authexec[264]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:36 *****-****-computer authexec[266]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:36 *****-****-computer authexec[268]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:36 *****-****-computer authexec[270]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:36 *****-****-computer authexec[272]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:37 *****-****-computer authexec[274]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:37 *****-****-computer authexec[276]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:37 *****-****-computer authexec[278]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:37 *****-****-computer authexec[280]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:37 *****-****-computer authexec[282]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:37 *****-****-computer authexec[284]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:37 *****-****-computer authexec[286]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:37 *****-****-computer authexec[288]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:37 *****-****-computer authexec[290]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:39 *****-****-computer defaults[292]: \nThe domain/default pair of (com.apple.desktopservices, DSDontWriteNetworkStores) does not exist
    Jan 17 19:46:44 *****-****-computer authexec[298]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jan 17 19:46:44 *****-****-computer authexec[300]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid

    Hi,
    Yes, I did resolve it - it was the graphics card. Changed that, updated OS X and it was done.
    I can't now remember exactly which card I used, and I'm away at the moment so I can't get to the infomation, but I do remember that it was a full length card with a large heatsink, and was a bit of a pig to squeeze into the chassis!
    Had to buy an adaptor for the second monitor connection, but that didn't cause any hassle. I got the card and cable from the local Apple Store.
    It also theoretically needed a later version of OS X than was already there, but since it allowed me to boot off the CD, that didn't matter (and it worked with the old one anyway, as it turned out).
    Oh, and also of course, although it's a bog standard PC card, you have to pay way over the odds for it because it has to have different PROMS for a Mac. (Thank you Apple.)  Just part of the price we all have to pay for using Macs.
    I seem to remember that there was a certain amount of dancing involved in upgrading the OS afterwards (might have had to do one step twice), but nothing that unusual.
    Hope this helps,
    All the best,
    Brian

  • MacBook Pro won't boot from recovery disc

    Hi, I've got an early 1998 15" MacBook Pro that came with Leopard I think, but I've upgraded along the way and was running Mountain Lion when trouble started. A few months ago it started randomly crashing and restarting, then progressed to not starting up but sitting on the grey screen.
    After reading some of the discussions on this and following the suggestions there, such as verifying and repairing the disk and the disk permissions, clearing the nvram etc, I took it in for a service and had the hardware checked - no problems found but the battery was replaced as it was pretty dead. A few days later the laptop started doing the same thing again.
    I backed up, downloaded a recovery disc to USB (on a Linux computer as mine was not compliant) although there was already a recovery disk on the laptop, and then erased the hard drive. This was pretty difficult as by this time all it could do was sit on the grey screen for a a bit and then restart, never actually booting up, but finally it worked.
    Now it won't boot to the recovery disc, either on the laptop or on the USB drive.
    Startup pressing Command R does not get me anywhere but the grey screen. Startup pressing Option usually shows me a picture of the Recovery disc but clicking on it gets nothing but the grey screen. With both, there's either a freeze or a continuous spontaneous restart. I also tried telling it I'd install Linux if it didn't want to let me reinstall Mountain Lion, but it did not respond to that either.
    If anyone has any ideas I'd be really grateful. The hard drive showed no problems in the test the service guys did and when I run verify disk it also shows not problems.

    Edward Durrant wrote:
    My question is, do I need the harddrive in for the laptop to function relatively normally?
    This is where you would install OS X, so yes, you need a hard drive. 

  • New HDD installed in PowerBook G3, won't boot from installation disk.

    I just installed a new hard drive in my G3 Wallstreet and I can't get it to boot from the original Apple CD.
    I've tried holding the C key as well as +⌥+⇧+⌫, but to no avail.
    The CD tests fine in my old iMac G4, so maybe the culprit is the optical drive, but then again, I'm not so sure.
    Is there a way to either boot my PowerBook or install OSX from my iMac G4?
    Message was edited by: rick268 Also, I can boot into Open Firmware just fine.

    Thanks for your help.
    WeLoveMacs wanted $50, but I just scored an entire topcase on eBay for $15, shipped. We'll see what happens.
    Allan Jones wrote:
    I maintatined three Wallstreets for a friend for years. They stayed in regular service from new until he replaced them with MacBook Pros last summer!
    In the years of keeping the old soldiers almost relavent, I ran into a "won't boot from a system disk" issue on two of them. In both cases, replacing a dead PRAM battery fixed the issue. Don't ask me why but that was the only thing that fixed them.
    When I was supporting those, you could still get new Wallstreet batteries from Other World Computing. Today they no longer show them. I'm not sure where to steer your for a new one. USed batteries are like used chewing gum, IMHO.
    You can try disconecting the wire from the PRAM battery to the logic board. That might help. Requires some take-down:
    http://www.ifixit.com/Device/PowerBook_G3_Wallstreet

  • OS 9 Powermac G3 Won't boot from CD

    My OS 9 CD won't boot on my B&W G3. I want to install OS 9 and then install OS 10.3 on top of that but I can't get it to boot from the OS9 CD. Any ideas?
    Message was edited by: plop1234

    The Option key at startup should bring up Startup Manager where you can select from available startup disks. If you have the Mac OS 9 disk in the drive, it should be one of the options. Your Panther system should be another option.
    If you are using a non-Apple keyboard, I'm not sure it will work, but the Option key is the Alt key on a Windows keyboard. If you were using the C key at startup to boot the optical drive, maybe that's why it did not work, because it was not an Apple keyboard.
    A dead PRAM battery can cause startup problems. If it was very weak, resetting PRAM may have drained it the rest of the way. It looks like this
    http://eshop.macsales.com/item-specials/Newer%20Technology/BAA36VPRAM/
    If you have a voltmeter, you can check your battery to see of you get 3.6v.

  • IMac won't boot up. Stuck in "verbose mode" ??

    I've had this problem on and off for a few weeks now. I either restart my iMac after installing some new software-or for other reason- and my computer won't boot up. Sometimes it will stay at the white screen with the grey apple for hours if I leave it there. I've tried all the tricks with key commands. I even reinstalled my software, which worked, but now its happening again. Today, I restarted my iMac, and the same thing is happening, except sometimes it will go into what I've heard called- "verbose mode." The screen is black and white command text appears in the upper left hand corner. Here are some examples of what appears...
    No Airport driver found.
    Exited abnormally. Bad system call.
    Repawning too quickly! throttling
    10 more failures without living at least 60 seconds will cause job removal.
    Will restart in 10 seconds.
    (this will continue until it has restarted and failed 10 times. After this is done, it will display one of the following...)
    too many failures in succesion
    OR
    local:/root# (continuously flashes on the screen)
    OR
    localhost:/ I have no name!# AppleYukon- eno link active, 100-Mbit, full duplex, flow control disabled.
    I really don't know what to do. I'm really frustrated with my iMac. I've had to replaced a dead hard drive within the 6 months of my purchase, and now it is acting crappy again.
    Can anyone help?
    Thanks.

    I tried using the disk utility on the grey disks, but
    they can't repair the error on my HD. I can't restore
    the original software from the disks either... there
    is an error when I try.
    No, you can't restore while the current OS is in place, due to the fact that your 10.4.8 isn't compatible with the older version (10.4.4) that's on the install DVDs. Once a Mac OS is in place, it can only be upgraded, not downgraded. You'll have to choose either:
    to "Archive & Install" which would set aside your current system unerased until the new installation is completed and your current settings are transferred over - at which point you can erase the archived OS.
    to entirely erase and reformat the HDD, then install a fresh OS.
    Use the install disc's version of Disk Utility to perform either. First, though, you probably need to do a PRAM reset - that often clears things up so that you won't get an error message.
    To reset the PRAM:
    1. Shut down the computer.
    2. Locate the following four keys on the keyboard: Command (Apple logo), option, P, and R. You will need to hold these four keys down simultaneously in step 4.
    3. Start up the computer.
    4. Press and hold the Command-option-P-R keys. You must press this key combination after the startup chord sounds, but before the gray screen appears.
    5. Hold all four keys down until the computer restarts and you hear the startup chord for the second time.
    6. Release the keys.

  • Mac won't boot properly unless in safe mode

    Recently I updated my MacBook Pro to OS  X Yosemite. I then started the process of the data encryption.
    I don't know what happened, but maybe the encryption failed, because now every time I turn my mac on, it won't boot properly unless it's in safe mode.
    Either it will have a black screen with a visible cursor, or just the desktop with no dock or the bar along the top and no icons, or it does boot up properly, but works extremely slowly. Like if I was to press the apple symbol on the top-right of the screen, it would take 5 minutes to actually open it. Nothing works properly.
    And so I opened up my system preferences, and discovered that the Encryption is stuck on half-finished. But I can't stop it. If I try to turn encryption off it says I have to wait till it's finished. But it never does, the progress bar never moves.
    If I open System Preferences while in Safe Mode, the progress bar for Encryption is grey, and underneath it says "connect to power to continue encryption". But it IS connected to power.
    Have I stuffed my Mac? Is there a way to get it working again?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Won't boot normally or in recovery and single user mode, safe mode hangs up halfway

    iMac locked up with visual glitches while playing the Mac beta client of League of Legends. Had to force a shutdown by holding the power button. Now it won't boot; after the Apple logo and spinning wheel I just get a white screen. I tried launching in recovery mode, that didn't work. Then I tried safe mode; the bar filled a little over half and then nothing but white screen. I was able to boot single user mode once; ran fsck -fy and rebooted, still white screen. Now I can't get back to single user mode. I booted with command option P R to reset the NVRAM and got the second chime, but still nothing.
    Luckily all my important files are in the cloud, but I'm really hoping my computer isn't completely dead. I haven't had any issues in the past. I've even been playing LoL for over a month with no issues, until now when I tried to play the newer game types, Dominion and ARAM; both caused visual glitches forcing shutdowns. I was able to restart my computer with no problem after the first two visual glitches, but after the last one I am stuck at the white screen as I described above.
    Thanks in advance for your help!

    I'd bet the drive is damaged. You could try reformatting if possible. Again, you are booting from the Recovery-10.8.2 disk if you can. If you can't, then you will need to use the installer disc that came with the computer.
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • I'm trying to install a new hard drive on my Touchsmart but the recovery disks won't boot.

    The Touchsmart 300-1120 is only 1.5 years old and it's hard drive is already fried.  I bought a new hard drive, ordered the recovery disks, and it still won't boot.  I've changed the boot order to go from the CD drive first, but all it does is click and then give the same error message it gave when the fired hard drive was in.  I checked the diagnostic, and it can see the new hard drive...it just won't boot. 

    Sometimes they do work - i've done it before.  I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
    Why not just clone your hard drive?  It'll save you a lot of time doing a clone rather than doing a clean install.
    Unless you're having issues with your old set up or  your old hard drive is dead.
    You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
    Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
    Good luck

Maybe you are looking for