5800 lock code

after firmware update to v21 it's not possible to input alphanumeric lock code, and the update did not reset it to 12345. so, how to change the code if it had letters in it?
Solved!
Go to Solution.

I found the solution , you need switch keyboard from numbers to alphabet. just do it by press for a while “#”.

Similar Messages

  • 5800 XpressMusic can't set Lock Code

    I’m having a problem to set up a password in 5800 XpressMusic. I know the default password is 12345, but I can’t change it. Is there anything I can do to fix this issue? Thanks in advance
    Menu > Settings > Phone > Phone Management > Security > Phone and SIM card > Lock code > 12345 > New lock code > 11111 > Code error

    Try to lock your phone by entering default code. Check whether it's working or not.
    Glad to help

  • !! Need help !! 5800 XM Lock code problem !!

    hello all ,
    Month ago i bought Nokia 5800Xm , next day of buying i find out problems with my handset , first of all all of my data in the memory card gets automatically deleted " don't know the reason " after that everytime when i click on messages it says cannot access memory card phone memory will be used. The main problem was that when the phone is locked then each time when i cancel the it " means cancel the lock code " there was a square dot in b/w 4 and 7 , next day i was at Nokia care and gave ma handset for check n all , they 1 of all said that it is a software issue , suddenly they say that it is a screen problem and the handset screen will be replaced . I was shocked when i hear this  , they say aftere 15 days it will be replaced , i gave ma handset to them , after 15 days yesterday they gave me ma handset . The black dot problem was solved but now whenver i cancel the lockcode , the background where lock is present sometime the screen get full black , sometime half black screen and half lock is shown , sometime full lock is shown, i again went to Nokia care they say it is the newly firmware problem " don't know if there were lying or something " . My Nokia 5800XM ver. is v31.0.008
    Plz tell me is there any other problem ?? I buyed it from Nokia , so i shout them that if there is another problem in ma handset , i need a new Nokia 5800 XM .
    Thanks
    Marshal

    What country are you in? Phones for certain countries where GPS on phones is outlawed (China I think is one) have no GPS built in, or functionality removed.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Lock code problem with last firmware of 5800 (v20....

    hi everybody
    what is the new lock code or the solution for this problem?
    Message Edited by elhardudi on 10-Feb-2009 12:17 AM
    Solved!
    Go to Solution.

    Unfortunately the only known solution at the moment is to take your phone to a nokia care point.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • Forgot the lock code

    Dear friend,
    My N73 infected the virus after clean it already it's lost my password lock code i'm not sure may be the virus change it by automatic.
    please help me regarding this problem

    Hello,
    You could do that in Nokia Service Center or by yourself in case if your phone is not locked.
    Andrey
    6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
    N95, E61i, E71, E72,8600, 5800, N8

  • Mail for Exchange and alphanumeric lock code

    I have N82 and installed MFE 3.0 version. My company runs Exchange Active Server  2003 and needs an alphanumeric lock code for phone which is not available on N82.  
    Are there ways to enable alphanumeric phone autolock on Nseries? or is this a serious limitation for all Nseries devices? Because i found 5800 XM and N97mini which support this feature. 
    -Karthik

    Go to your outlook web access website and click on the lock and then view certificate. The details and then you can save it in DER format to your desktop.
    Then go to this site:
    http://www.redelijkheid.com/symcaimport/ and insert through the browse button and then copy the link to your phone.
    Then you should be able to download it
    You can also go to your IIS default site on the exchange server and directory security and export your certificate under edit certificate.
    I have tried everything now. I can download my certificate and the valicert from GoDaddy, but the Nokia phone is still saying "do you trust this certificate" every time the phone syncs.
    Our firm have taken the E-phones away now and went over to windows mobile and all of them worked within 10 minutes without any errors.
    The funny thing is that when you try to call nokia, they wont help you with Mail for Exchange, and it is there program
    I know my GoDaddy certificate works on windows mobile phones, so It must be something with Mail for Exchange.
    Every guy I talked to about symbian phones have told me they always gives problems with SSL. I am a bit **bleep**, but can conclude that Nokia is for the private consumer.
    Best Regards
    Morten @ Denmark
    Message Edited by asp3200 on 02-May-2008 08:37 AM

  • Keypad lock code

    hey 
    Recently i have decided i would like to have a keypad lock code, just to stop people picking up my phone and reading through messages, browsing pictures, etc.
    I have changed the lock code and it is no longer 12345. I would like to activate it though so that when i want to enter my phone it requests it. when i am in phone and sim card settings at the top it says pin code request should i turn it on however if i do i am worried that it may activate options under it 'PIN code' & 'PIN2 code' i am un sure what these are. thanks for your time.
    Also it is a nokia 5800! 

    there is a code you can chage for the phone itself and that is for the phone.
    the pin and pin 2 are for your sim card different locks.
    just enable your phone lock just make sure you will not forget your code and leave the pin and pin 2 alone
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Lock Code when turn on - 5800XM

    When I had v40 I had to tenter the Lock Code when I turned the phone on (something I did rarely so no problem).
    When I updated to v50 it doesn't ask for the Lock Code now. Any one know how I can set this to happen please?
    Mark

    I tried to paste something from the extended user manual, but it looked weird on the screen, so I've tried to make it look sensible.  I hope the following does the job:
    Select Menu > Settings and Phone > Phone mgmt. > Phone and SIM card. PIN code request — When active, the code is requested
    each time the device is switched on.

  • I am trying to restore my iPhone 5 and my screen is no longer able to use and there is a lock code on the phone, how do i restore the phone without having to use the phonne?

    how do i restore my iPhone with a lock code on the phone and the screen is completely unable to use?

    Forgotten Passcode or device disabled after entering wrong passcode
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • How do I set up a lock code for my Nokia C2-02?

    Hi, I have a used Nokia C2-02 phone from a seller on eBay.
    I wish to protect my privacy so that other people cannot access my texts, etc.
    When I go to 'settings', 'security', and click on 'access codes', in order to set up a lock code,  the display says'change security code'.
    When I ckick on it, I get a request for my security code.
    Twice now I have keyed in'12345', which I take to be the default code.
    Each time I get an error message and the second time it said that I have only one more chance to key in the correct code.
    Perhaps the previous owner had a code, which I take to be the same as a security keyguard code.
    When I go to 'device' in 'settings', it says that the security keyguard is off.
    I can switch it on, but to activate it I again need to key in a code.
    Am I corect in thinking that either someone has alrerady set up a code or the default code is not '12345'?
    Also, What can I do to set up my own code?
    Fianally, What if I use a pin code? Will that protect my privacy?
    Do I have to get in touch with my network provider ( Tesco Mobile) in order to set it up?
    I'd appreciate any help anyone can give,
    Laurence
    Solved!
    Go to Solution.

    If I used a  pin code instead, would it protect my privacy?
    would it stop those without the code reading my texts and so on?
    PIN Code is basically for the SIM card and not the phone. Talking of privacy, your phone will be fully explorable if the SIM card is removed, so PIN scenario is pretty wasteful. Majority of the phones only ask for the PIN code when the phone is started and register the SIM to the network only wen PIN is furnished.
    If It does not work I could find that I have locked the phone, which could necessitate sending it to the Nokia Care centre.
    This is where the online free service may come in. It claims that it can find the security mastercode for any individual phone, based on the IMEI number, which you access by keying in asterisk, hash, 06, hash, or by taking the back off the phone and looking inside.
    Armed with the 10-digit mastercode you key it in and it unlocks the phone.
    That, at least, is the claim, but on another mastercode site there's a warning that the mastercode works only for older models.
    I have my mastercode, but I don't know whether to take the chance.
    Does anyone have any views on this?.
    , Cheers, Laurence
    Unfortunately, these type of Master Codes do not work. If ever they worked, the phones would become too easy to break in. As far as I can remember, I have not seen any person with a claim that one of those Master Codes worked for them. Maybe they worked for very very old 1st gen devices from Nokia, but not anymore. The security code is based on what user enters in the settings and there doesn't exist any master code to over-ride that. If it would, Nokia Care should be making use of that instead refurbishing/flashing the phones in every case that called for Keyguard Code.

  • How do i set a locking code to my macBook Pro?

    How do I set a locking code on my MacBook Pro?

    >system Preferences>Users &Groups
    Unlock the padlock
    Login options
    turn off automatic login

  • How to show ipad application in itunes, but will only be assessable to owners, not the general public.Using lock code/password protected on iTunes

    How to show ipad application in itunes, but will only be assessable to owners, not the general public by using lock code/password protected on iTunes

    So if I understand you properly, I need to create EOs for all my list of values (which are based on views of Oracle apps tables) and base my VO on those EOs. And then I setup associations between these EOs and the Item EO. Then I include the these EOs in my Items VO and add the description attributes to my list of attributes. I had done this for the list of users, but for the views of Oracle I had just created read only VO. Sounds like that won't work if I want to display the description. I know what to do - I guess I was hoping there was a way to use the read only VO.
    Thanks
    Karen

  • Bit locker code /letters wont go in, even when I cut and paste it all in, it doesn't go through. I'm new to computers. Is this a con to get us to download shite?

     Hi, I forgot my memory stick code. My bit locker code letters wont show on screen, even when I cut and paste it all in nothing happens, is this a con to get me to download shite I don't want.

    Hi Franko,
    We discuss SQL Server PowerPivot for Excel related issue in this forum. According to your description, it is more related to Windows Security. I would suggest you discuss this issue at the following forum for better support:
    Windows Security forum:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprosecurity
    Regards,
    Elvis Long
    TechNet Community Support

  • Forgot lock code on find my iphone. I lost my phone a few weeks ago and when it seems that it can never be returned i login to my account and put a code using find my iphone

    I Lost my phone at the office building with more than 10different company and thousands of employees. since no one returned the phone and the device was already turned off i tried logging in and use find my iphone to send a message. But after days since no one is returning it i tried putting passcode on lock mode... And who would have thought that after a week someone will call me and told me that she will return the phone. But unfortunately i forgot the lock code so i cant use it. I dont want to restore it since my photos and videos are not sync to my itunes. if only theres a way that it would only just require my apple id and not the 4 digit code

    There's no way to unlock it without restoring it.
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • How can I disable the lock code on my N8

    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?

    singmk wrote:
    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?
    Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
    My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
    You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
    Hope this can help you.
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

Maybe you are looking for