5800 Messages, Homescreen shortcuts missing, memor...

Hi All,
In some dire need of help here. I was given a "battery empty, recharge battery" warning after i pressed send on my Nokia 5800XM. The phone shuts off itself and i am not sure if the message was sent successfully or not. And that could be the cause of all the problems stated above.
After the restart, I noticed the following:
i) All previous messages stored in message folder in memory card is missing. Displaying latest 2 messages received after phone restart
ii) Homescreen shortcut missing. There should be 4 shortcuts on the vertical bar, all missing. calendar entry is still present
iii) Homescreen button: Dialer and Contacts NOT functioning
iv) SD Card space significantly reduced. Previous was left with 3.4GB, now is only 2.5BB!! A check on memory details show 250GB of "others file"
v) Email setting erased. Mail boxes setup previously not found.
What could have happened? and did anyone experienced the same problem before? Anyway solution on how to remedy it? Does resetting the factory setting helps?
i have tried the following so far:
i) swapping message storage folder from phone to memory card and back to phone. Same status.
ii) Removing and reinserting memory card. Same status
iii) Change homescreen theme from shortcut bar to contacts bar and back to shortcut bar. Same status.
I am running on V30 FM. Unable to get the details as can't press *0000# on my dialer as it is disabled.
Note: connected phone to sync contacts, messages and photos via Ovi Suite on Windows Vista based Laptop. Running latest Ovi Suite version 0.4XXX (can't remember).
Please help, thanks!
was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
KeN82Ny

Hi!!
Amazing!
I have the nokia 5800 cracked or hacked, i tried this solution and work fine!
just rename the file c:\private\10202BE9\persists\10275102.cre
And restart the phone
My phone is safe of a hard or soft reset
Greetings!
Hi!!
Amazing!
I have the nokia 5800 cracked or hacked, i tried this solution and work fine!
just rename the file c:\private\10202BE9\persists\10275102.cre
And restart the phone
My phone is safe of a hard or soft reset
NOTE: if you dont have your telephone cracked, you will not see this file.
Greetings!

Similar Messages

Text Message incomplete or missing? Also-SMS editing / backspace malfunction...

First issue - sometimes I received text messages that are missing the last few words/characters. I don't think this is an Android or iPhone originated issue as this happens at random from people that I know have different types of phones. Sometimes the 160 character split will break up the message and send the rest in another message, but most of the time I never see the end of the message. I currently use the existing text messaging app in conjunction with the SMS pop-up. The issue was prevalent when I used Handcent and then uninstalled it to see if that was the problem. I have also uninstalled SMS pop-up to see if it was the problem with no luck. I have looked over the settings multiple times and still cannot find anything that would be causing this. Suggestions are welcome.
Second issue - when editing a text message in portrait mode I may erase multiple characters by holding down the backspace key. On occasion, the app flips out, reverts to showing the very first message that was sent or received for the contact, freezes momentarily, and then two buttons appear on the bottom giving me the option to Cancel or Delete. I will hit Cancel or use the back button on the bottom of the phone multiple times before it will return to my message, which at this point has saved as a draft. This is EXTREMELY frustrating. It does it only at random, but it seems to be getting more frequent. The only option most of the time is to go Home and then return to text messages, find my draft, and use the backspace key carefully (and one quick push at a time to erase) so as not to invoke the same issue.
I think both of these are bugs that may be inherent with this phone in particular or possibly Gingerbread...
Thanks!
-Wes

I've been having this same issue for the past few months, in my case the problem seems to be more prevalent with text messages originating from other carriers (but not always, occasional partial incoming text issues from Verizon wireless phones as well). I called technical support, followed all their advice (basic tech advice, power cycle, remove sim, reboot, etc.) and was also transferred to HTC support that recommended a hot fix, which didn't really do anything to resolve the issue, also then did a factory reset and still no resolution. Not sure what other options I have....besides waiting for a new device when I am able to upgrade. Off topic, I think its Bee S to not be able to upgrade to a new device within 2 years, when Verizon does not fully support, properly updated/hotfix, existing issues in a timely manner...why is it that we are using and outdated OS, when a new one is out and available. Another compelling argument to purchase an iPhone (on any carrier), one device, one OS.....everyone gets an update at the same time, and phone issues are rapidly resolved. I can continue my rant, but I'll leave it as is...same issues, different day and I'm sure you've all heard the same rants of frustration.

When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start". After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing". I downloaded MSVCR80.dll.

When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Getting an error message about a missing file when I try to open Firefox

When I tried to open Firefox today I received a message about a missing file (Wrusr.ddl) and that Firefox was not able to open. I tried uninstalling and reinstalling but it did not work. I have no idea what that file is or where is went. I used Firefox 2 days ago and it was working fine. The only thing that changed between then and today was that I renewed my antivirus software but I definitely did not delete any files and I made sure that Firefox is allowed to access the internet. I've been using that same software (Webroot) with Firefox for years and never had any issues before today. Any help would be greatly appreciated! I have included a screenshot of the error message below.

hello angelag.132, the WRusr.dll file is part of Webroot SecureAnywhere - try to reinstall or uninstall that software.

How to change the message in the Missing Plug-in dialog?

Hi, all.
I want to change the message in the Missing Plug-in dialog
when a doc is opened containg data from a missing plug-in.
I defined MissingPluginURLValue and MissingPluginAlertValue in ID.h
which are used in ExtraPluginInfo.
But there is nothing changed in the Missing Plug-in dialog.
Can someone help me?
BestRegard.
Miya.

As far as I know you can't change that on CUCM.
On CME you can.
Bye,
Jan
Sent from Cisco Technical Support iPad App

I have Photoshop 7 on a laptop with windows 8.1. When I try to open Photoshop 7 I get the error message "cannot open missing personalization information". What is this and how can I fix it?

I have Photoshop 7.0. This is on a laptop running windows 8.1. When I try to open it I get the errro message: " cannot open missing personalization information".
what is this and how can I fix it.

Run it in compatibility mode and input the credentials.
Mylenium

When starting InDesignCS2 received new error message -- InDesign is missing required system fonts or

We are not able to start Indesign CS2 without getting the error message: <<InDesign is missing required system fonts or CMap files. Please reinstall InDesign.>> This is on WinXP. Recently I installed Creative Suite CS4. It took almost a day to install. The installation kept on stopping. Each time we were able to install one more program. After checking all of the programs we discovered that Firefox would not start due to a possible font error. After reading many posts I decided to uninstall a lot of fonts since I did not know which one was the culprit. However now I am missing a font (at least I hope that this is caused by a missing font and not anything else) that should be there and I don't know which one it should be. I did uninstall a <lot> of fonts and don't remember which ones. WE did uninstall all CS2 programs and then reinstalled only the necessary three. However that did not make any difference. Any ideas and suggestions would be welcome Thanks Pia Pehtla

A forum search for "missing required fonts" brings up this thread which should solve your problem:
http://www.adobeforums.com/webx?128@@.3bbdb0a7
Peter

I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing

I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???

First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Why does my Safari homescreen shortcut on my iPad NOT have a url address bar or the ability to open a new tab?

Why does my Safari homescreen shortcut on my iPad NOT have a url address bar on top or the ability to open a new tab? When I open my homescreen shortcut and click on a link which would normally open a new tab I get the white screen od death ( in Safari). ???
thanks.
pedro

1. Settings>Safari>Clear History, Cookies and Data
2. Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo

Error in SXMB_MONI - "Message Recorded (Commit Missing)"

We have implemented BADI BADI_LE_SHIPMENT~BEFORE_UPDATE to call asynchronous proxy to send a message to PI system. This proxy is called inside a loop to send message for each delivery in the shipment. Some messages are successful and some are in scheduled status with error 'Message Recorded (Commit Missing)'. This error is coming only for particular interval and we dont see any PI outage at that time. And also we do not see any entries in queue(SM58, SMQ1, SMQ2). Searched in SDN, people are suggesting to use commit work after the proxy call but I am concerned to use commit inside a Badi. I have more than 1000 messages in production, can not reprocess all the messages manually from SPROXY. Please give me your suggestion to resolve this issue.

Hi,
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
After that please register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
Regards,
Pradeep A.

When my phone is looked, i would see or hear that there is a message or a missed call

When my phone is looked, i would see or hear that there is a message or a missed call on my phone;
Is it an App that enable this function?

http://www.apple.com/feedback/

Error message : Info Idoc missing ;database system

I am trying to load the data from database system oracle ,the data was successfully loaded into psa , but cant able to load the data into ods from psa .
Data in psa is all green without any errors , as info idocs are missing its not letting to load data manually from psa to ods ,
I try to reload but coming up with same error
Next day problem was fixed automatically, I want to know what is the exact reason for this problem and how can next day it fixed automatically

Error message : Info Idoc missing ;database system
I need the solution urgently, please help

Outbound Proxy - Message Recorded(Commit Missing)

Dear All,
The proxy's are configured correctly, and when tested the message getting created with status as Message Recorded(Commit Missing).
SLDCHECK transcation is also sucessfull!
No application Log exist at transaction SLG1!
What could be the reason for message not processed further?
Thanks & Regards,
Jilan Bhasha

Do the messages in ur ECC sxmb_moni show a green flag...oif so it a simple commit use..
Write this code at the end of your Proxy call -
Commit work.
regards,
arvind R

Suddenly can't import footage, and already done projects give me a media offline message importer is missing. Help... anyone?

I cannot import footage of any kind anymore in premiere pro cc, and all finished projects give me a offline media message'importer is missing'. Anyone with the same problem?
I am currently working on a PC, windows 7professional. GPU GTX 760. Quicktime is player up to date.
Thanks in advance

i have a solution for import and read any files
its a problem with the 8.2 and last version of premiere and setting on the cloud
in premiere you desactivate on the preference the synchronisation with adobe cloud (all)
and after you go on you os c/ user/ appdata / adobe / premiere / roaming / 8.0 you cancel all the file and after you restart adobe
for me is ok - but for the moment i don't have the possibility to export in h264 ?

Error message 'Employee ID Missing'

You receive error message 'Employee ID Missing' while assigning credit card expenses in an Expense Report and then the user is not able to save the Expense Report.
This error message "Employee ID missing" unfortunately will appear when you open some of the old expense reports. These expense reports are consistent and do not have to be changed. The upcoming error message "Employee ID missing" can be ignored.
SAP has corrected this issue and for all new expense reports this error will not appear.
PS: If you have to change one of these old expense reports from business point of view, you can delete and reenter the cost assignment on expense level in order to get rid of this error message.
Thank you.
Best Regards,
Cryssal

Hi
I have checked this but there is still the error message with the users. The org. unit is ok. Is there any note that can be applied so that when move users to another org. unit the error messages do not occur?
Kind regards

5800 Messages, Homescreen shortcuts missing, memor...

Similar Messages

Maybe you are looking for