5800 not recognized (Windows 7)

Hello,
my 5800 is listed as an "unknown device" in Windows' device manager. I installed Ovi suite before connecting the phone. The phone IS recognized when connected in mass storage mode, not so in pc suite mode. Servicelayer.exe is up and running. Any help, please?
Edit: Spoke too soon. I removed the phone from the device manager in an effort to let it reinstall drivers. Well, now the phone is not even recognized in mass storage mode, anymore.
Message Edited by sirlosealot on 05-Sep-2009 02:55 PM

same problem with WIN7-final (ultimate Ed.) for me...pls help... Nokia software is **bleep** again... Device not recognized.... PC Suite installed first.....30 minutes have passed and it says in Get connected - "Windows is installing PC connectivity drivers, please wait " ...I'm waiting for 30 minutes now... and nothing...
I'll try total removal in a few minutes if it cheeps this way.. .. It's always a problem with nokia software ... their programmers don't do a very good job...sadly ..

Similar Messages

USB Device Not Recognized - Windows XP

The IPOD 5G and my computer were working just fine until the computer stopped detecting the IPOD. I get this message:
USB Device not Recognized. The USB device attached to this computer has malfuctioned and Windows does not recognize itit. Try reconnecting the divice(ipod) If Windows still does not recognize it, replace the device."
IPOD still works and is recognized by my work laptop. What driver needs to be installed for the ipod to be recongized?
Help me
Windows XP

Someone here said that you need two drivers usbstor.sys and usbstor.inf I found them at driverguide.com. I have not tried to load them yet but I will probply tommorrow.My coumputer will not see ipod as a hard drive, it loads video fine and all my music but no pics.

Macbook Pro not recognizing Windows 7 RC 32-bit disk

I'm trying to install Windows 7 RC on my Macbook Pro but it's not recognizing the disk. Does anyone know why this is?

ucbound,
I replied in my post to your same question as well.
Are you using Boot Camp Assistant to set-up for a clean install of Windows 7 RC:
Start Boot Camp > Create Windows partition > insert Windows DVD > click 'Continue' after DVD icon shows on desktop?
Or are you receiving the error message after clicking 'Continue' in Boot Camp Assistant?
Others here are more experienced with the MacBook series so hopefully they will chime in at some point if it is an in-depth issue / resolution here.

Plugin not recognized Windows 98

I'm cross posting....
http://forum.java.sun.com/thread.jsp?forum=30&thread=462127&tstart=0&trange=15
Originally in Java Plugin - posted for four days, no replies. I'd like to get this working....Help is appreciated...
The jre 1.3.1_04 Plugin is not recognized by browsers Internet Explorer 4.0 and Mozilla 0.7 on a Windows 98 first edition (Java thinks this is Windows 95 - ?) machine. Using the applet tag in my web page.
I've installed a jre exe file that I downloaded from another computer. But the Internet Explorer browser still uses the MSJVM to load the applet. I see in the registry that class id - 8AD... does refer to the jre 1.3.1_04.
I've not had trouble on Windows 2000. How do I enable the browser use the Sun Plugin, not MS JVM on Windows 98?
I've researched the "enable browser" section of the sun java site, and followed all of the instructions there.
http://java.com/en/download/help/enable_browser.jsp
I've checked the troubleshooting section of the download for jre 1.3.1, nothing there helps me...
http://java.sun.com/j2se/1.3/install-windows.html#troubleshooting
Thanks in advance.

Thank you so much for your response.
I was just thinking about what a goon I am for cross posting. It is frowned upon in the forums (as it should be, and I should know better) and I was wondering if that is why no one would respond.
Yes I see that "Microsoft Internet Explorer" is listed in the Browser tab of the Plugin Control Panel. And I see that it is checked. I have restarted both the Browser and the computer several times since install but to no avail. I still see the MS JVM console in Internet Explorer.
Mozilla is not listed in the Plugin Control Panel, though I wouldn't expect it to be.
I remember reading somewhere that Windows 95 was not supported by the JRE but I think that referred to 1.4.2 specifically. I'm not sure if Sun stopped all support for Win 95. And though I have Windows 98 first edition, the effect of System.getProperty(os.name) shows "Windows 95". So this just may be lack of support for my OS system in general, but I don't know.
Thanks again for your post.

Bootcamp Assistant will not recognized Windows 7 disc

I am running a late 2009 Macbook Pro with 10.8.2, trying to install bootcamp but when running the Bootcamp Assistant my Windows 7 - 64 Home Premium disc is not being recognized, I get a error " The Installer Disc Could Not Be Found Insert your Windows installer disc and wait a few seconds for the disc to be recognized"
The drive just tryes to run over and over but never mounts the disc.
Any recomendations?

make sure you install the apple hardware drivers the correct video card driver is required to use external displays
one can make a driver stick in bootcamp on osx or one can download the zip file with drivers from apple

Startup Disk not recognizing Windows disk

I had a working Snow Leopard installation with Windows XP on a separate disk. Bootcamp worked correctly. I reinstalled Snow Leopard on the primary disk and now Startup Disk will not recognize the Windows disk, although holding down Option at startup recognizes both disks and using Startup Disk on Windows recognizes the OSX partition.
Any ideas on how to solve this?
BTW, I do not have any NTFS software running on under OSX.
Thanks,
Mitch

I'm having the same issue except with Windows 7. Mac OS X refuses to see my NTFS partition.

Nokia 5800 not recognizing Nokia HS-45/AD-54 Music...

I am having issues with the Nokia HS-45/AD-54 Music Headset that comes with the Nokia 5800. It was working fine untill yesterday at which point the phone is no longer recogniziing it as a valid accessory. Has anybody else had this issue. I have rebooted the phone but still the problem persisits.
The phone is running firmware version V20.0.012
Thanks for any help that you can provide

How is the audio quality of HS-45, AD-54? I use HS-47 with my 6110 Navigator and the 'bass' produced from it is terrible even with bass-boast in "off" position. I want to buy a new headset.
I also found HS-81 with Sennheiser logo. I'm not sure whether it comes with ff and re buttons. It didn't mentioned in "features" and the picture shown is not distinct.
Please help me comparing sound quality of following headsets:
1) HS-44 AD-44
2) HS-45 AD-54
3) HS-81
Thanks in advance.

TS4531 Bootcamp: Hdmi display not recognized windows 7

i have a late 2012 macbook pro retina with bootcamp windows 7 installed, when i try to connect a display on the hdmi port, nothings happen
its like theres drivers missing for the hdmi port. i tried all possible things, went to screen resolution options on control panel and connect external display options.

make sure you install the apple hardware drivers the correct video card driver is required to use external displays
one can make a driver stick in bootcamp on osx or one can download the zip file with drivers from apple

Ipad not recognized by usb windows

Trying to get an iPad hooked to iTunes for a guy at work. I can't. His iPad is not recognized on his laptop, but ALL our iPods/iPads are recognized by it. This is an original iPad.

Device not recognized
Windows :
http://support.apple.com/kb/TS1538

"USB Device Not Recognized" error when I connect iPod to my PC

I have a brand new 5th gen (I think) iPod.
I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
Can anyone suggest anything ?
I've tried the 5R's as far as I can, and I read through this thread:
http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
but there didn't seem to be anything conclusive.
Thanks for any help,
Jill

First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

Zen Sleek Photo gets USB DEVICE NOT RECOGNI

I have ZEN Sleek Photo which i use for about a week now.
Today I connected the player to the computer and got
"USB DEVICE NOT RECOGNIZED" window in Win XP
and the Zen Photo froze.
Disconnected it, reset it using a pin, then turn it on and it's "re-building library"
It works good as a player but i can't connect it to the computer.
Tried restarting the computer, restoring the windows to a previous day, connected to all possible USB ports nothing hel
ps.
Hope for an answer
Thanks in advance,
Danny
UPDATE.... PROBLEM SOLVED.. LOOK BELOW.. FRED'S SUGGESTIONMessage Edited by dindia on 07-24-2006 2:49 AM

fred38 wrote:
Hi i had this problem too and the solution was amazingly simple. (I found it by searching on Google for ages!) Turn your pc off and then unplug it from the mains for approximately 30 mins. I know it sounds crazy but apparantly static electricity can cause problems with usb devices particularly if you have your device already plugged in to USB port-Windows forgets its there! After 30 mins plug your pc back in to the mains and voila! your Zen will be recognised again.
2:44 AM : After 30 minutes of trying to fall asleep with no success turned on computer and connected the Zen... Didn't have much expectations, but IT WORKED! IT REALLY DID! WINDOWS FOUND THE DEVICE CORRECTLY AND EVERYTHING IS WORKING NOW!
THANSKS FRED!
Danny

X58m and problem with eSata NOT recognized at all, even at bios post

Hardware:
i7 920 & msi x58m
12 gb ocx platium tri channel DDR3 1333 (running at 1066)
Sapphire 4890 Toxic 1 GB Ram Vapor Coooled Video
Raid 0 Seagate 750 GB (two striped drives)
CoolerMaster Gemini IIs Heat Pipe CPU cooler
Bios flashed though MSI auto flash in windows mode (1.4?)
issue: Thernaltake BlaqX Esata/USB docking station NOT recognized
Windows 7 64 bit insalled perfectly.. programs installed perfectly
I have two ways to connect to eSata
1- rear eSata port that is already built onto the rear panel of board
2- internal sata (front panel has cable running to 7th 'isolate' sata port)
Docking station works perfect on my winXP machine
Works perfect on my Dell notebook with Win 7 32 bit
Docknig station works on ALL machines when using USB cable
On boot post, msi x58m does not report the extra drive being present
Help!

Quote from: NovJoe on 20-July-09, 21:49:41
Have you install all JMicron drivers (including RAID) for the board yet?
Windows 7 handles these issues, because the device WORKS on my notebook that has windows 7 (32 bit). Mind you, I did a fresh install of windows on my notebook, so it wasn't Dell who installed those drivers for me.
Also, the devices are NOT showing in the post screen at first boot -- again the jMicron suggestion is moot.

USB Device for IPOD not recognized by Windows, whether ipod connected or no

During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
Any suggestions?

I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
This is driving me up the wall. Is there a glitch with iTunes 7?
Can anyone help me out?? Thanks
Windows XP

5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

How to reformat Ipod Nano 5th gen when not recognized by Windows or iTunes?

I've done all the steps on the site to correct this problem up until the reformatiing part except I tried to update the driver software but Windows says that it encounters an error when trying to install the new software.
So after going through the steps I noticed that the iPod I just bought was formatted for Mac. It says that in order for me to reformat, I have to restore my iPod in iTunes but since it isn't recognized my my computer or iTunes, I can't do it.
Suggestions anyone?

Hello there, HateKnuckle.
The following Knowledge Base article offers a pretty thorough step-by-step for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

5800 not recognized (Windows 7)

Similar Messages

Maybe you are looking for