5800 restoration process error
Hi
i have a problem with restoration process, i've made a backup with my file manager and i resetted my phone to factory setting, and now, when i want to restore my files, it says memory full, i have 71mb free on my phone memory and my userfile.arc (backup file related to files) is about 6mb, do you know what can i do for it?
thnx
Hi
successful PO will create vendor buyer assign a vendor in the existing PO.
or
end user if assigned a prefered vendor and no sourcing config. It will create a HELD po only then buyer enter a vendor and order PO .
if the end user assign a fixed sos , successful PO will be created
partner function -39 prefered vendor
partner funtion- 19 fixed vendor
br
muthu
Similar Messages
-
Disk Utility Restore Process Input/Output Error
<Image Edited by Host>
My niece's MBP specs above. If I posted a picture of this poor machine, there'd be a lynch mob of passionate Apple fans arrive at my door wanting a public hanging...It's been dropped no less than a dozen times. (The ethernet port is stretched out of shape so badly that a standard plug will no longer fit the port!!!).
Among other physical injuries, the screen won't present an image (just flickers white lines on black background, hinge has partially detatched, suspect the ribbon that transmits the display signal has been compromised). A visit to the Apple store tells us (by plugging into a cinema display via TB) that the hard drive is still in tact and data is salvageable. Keyboard and trackpad both work fine (surprisingly).
Long story short, she's acquired a new MBA, been read the riot act about looking after it, and I have the unenviable task of salvaging her data, approx 275Gig.
My objective is to obtain:
1. A full copy of the data (existing file structures) - Complete
2. A bootable disk image of the MBP - Incomplete and troublesome
I have at my disposal:
Mid 2011 27' iMac (Intel i7) on Mav
MBPr13 (third host if needed) on Mav
A home ethernet network with enterprise grade switching
A Lacie 5BigPro 10TB NAS
A couple of 1 & 2 TB Toshiba external drives, and
Enough network adapters, USB cables and thunderbolt cables to suffice. Admin priviliges all round. All disk permissions repaired.
Current connection config is the MBP thunderbolted to the iMac. I can use TDM (if I need to interface with the MBP using the iMac display) or can boot in Target Disk Mode if I want to see the MBP disk image on the iMac.
Regarding Objective2: A bootable disk image of the MBP, I first tried to use the Restore function in Disk Utility, but that only works when booting the host in Recovery mode, whcih doesn't support TDM, so I'm flying blind...
Next try, I booted the MBP in Target Disk Mode, which allowed me to use the Restore process from the iMac's Disk Utility, select the MBP HD, and target an external drive (one of the Toshiba's) plugged in to the iMac via USB.
I've now tried this Restore 3 times, each time getting the following I/O error (at about 45 munites in to a projected 4 hour process):
Any thoughts on root cause?
And (given my screen/display limitations) am I missing a far simpler option?
Cheers, SlaIf that were the case you would not get in/out errors. These errors occur because the drive is no longer able to transfer data which is a hardware failure.
If you want to post an image to the forum then you need to open the message editor and click on the Camera icon you will find in the editor's toolbar. Then select the image you wish to post and click on the Insert button.
You can try running the Apple Hardware Test to see if it reveals anything.
Using Apple Hardware Test
Intel-based Macs- Using Apple Hardware Test -
My iTouch 4thG first was not being recognized by my iTunes, so I couldn't sync my ipod. After trying to restore, like it told me too, the process froze not too long after beginning. The progress bar on iTunes gets maybe 1/8 of the way before it stops. I tried everything iTunes support told me to, but nothing works. The restore process either freezes or will not begin at all & shows and error message with the error code 21. iTouch has been unusable for the past 2 days, I have tried everything! Please help!!
Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694 -
Error (14) and (9) during iPod Touch Restore process
I am getting the following error when trying to restore my iPod Touch in iTunes:
"The iPod, "iPod" could not be restored. An unknown error occurred (14)." Sometimes I also get error code (9) as well.
I have the latest version of iTunes and have tried 2 different cables and 2 different computers.
All security software is up-to-date.
This all started a few days ago when my iPod would just freeze, then the main light would flash and it would shut itself off.
I then tried to do the restore process within iTunes.
Now, whenever I connect my iPod, I get the following message:
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
When I click 'OK", I will get the option to "Restore". I then begin the restore process.
First it says: Extracting Software
Then it says: Preparing iPod for Restore
Then it says: Verifying iPod restore with Apple
Then it says: Waiting for iPod
Then it says: Preparing iPod software for restore...
Then the iPod flashes and resets itself and I get one of the two error codes (9 or 14).
There are lots of articles up here with the same issue but no resolution...has anyone ever found one?
Help!!!Hello MrsJoeJonas
Start with the article below to troubleshoot issues with restore error 9, as that error relates to security software.
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694
Regards,
-Norm G. -
Error 9 pops up when trying to restore Ipod 5. The problem seems to be that my ipod disconnects during the restore process. My ipod is stuck in restore mode so I can't access its update serever. I have already updated my pc and its security settings. Is there anything else i can try?
Hello AS234,
This error is typically indicative of a conflict with installed security software.
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Allen -
my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please helpThis is what it says about error 2006
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service. -
please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com -
How can i resolve the -1 error occuring during the iphone restoring process.
how can i resolve the -1 error occuring during the iphone restoring process.
hi ive also got the same probblem ive had it working last night but then after 2 hours of working it decided to put the phone back into recovery mode plus its an unknow error (36) Ive tried to connect to i tunes and it started to recovery and wipe the to put it back into factory settings then came up with the error 36 can any one help
-
my iphone 3g fails to restore. i have tried to restore many times and in different computers but at the end of the restore process it keeps giving me an error message- 1015. can anybody help? thx.
The phone was jailbroken. That's what that error indicates. You can't get help here. You can't get help from Apple.
Try Google. -
Hello
My iphone 4S switches off after showing horizontal lines on the screen cutting through the apple logo during the restore process and then right after my iTunes shows the error 9 message, this happened 2 days ago when my phone just switched off unexpectedily and has been in this recovery mode since then. i have watched videos on Youtube and i have disabled Firewall before starting the process, i think i have done almost everything. please help anyone what do i do from here?
Just for interest sake i watched this video on youtube where this guy had the same problem but the difference is that he had it on an iPad. he opened the ipad up and did something on the ipad, it took less than a minute then his ipad worked.
I would appreciate it if someone would respond to this as fast as they can i am so stressed.
Regards
LwandoRead here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue. -
HT201210 What to do when an error occurs after the restoring process? my phone wont turn on anymore
What to do when an error occurs after the restoring process? my phone wont turn on anymore
The phone is telling you to plug in your phone to your computer. Do that then let it sit for a few minutes and then try it again and make sure itunes is open when you do
-
I hit the restore process, get a spot on apple's servers, it goes through the restore, and at the very end it fails and gives me error 3004 :|
Jdda wrote:
... error 3004 :|
See here for your Error message > http://support.apple.com/kb/TS3694 -
System image restore process failed - WSE2012
I need some help. My system drive failed and I'm forced to attempt a recovery using the server backup located on my backup volume. Using a bootable USB stick, I successfully boot in to the installation media, navigate to the repair screen, and select System
Restore. The software attempts to find a suitable backup, which it does and recommends the backup dated 2/5/2013 (about a week ago). I click NEXT, select the EXCLUDE drives to exclude those drives that are part of my storage pool (I've also not selected anything
to exclude. Here's my selection:
Disk 4 - USB STICK w/Install Media
Disk 5 - NEW REPLACEMENT DRIVE (fresh)
Disk 6 - Storage Space
Disk 7 - Storage Space
It reports that Disk 3 is automatically excluded because it contains the backup. So far all this seems in order.
I proceed to click NEXT to get to the final recovery options page. In addition to the server name and date of the backup, I'm presented with the following:
\\?\Volume{824f6b2f-3b3a-11e2-93ed-806e6f6e6963}, C:
Upon clicking FINISH and receiving the warning that all drives will be reformatted and partitioned, I'm presented with a dialog box in about 5 seconds that states the following:
The system image restore failed
An error occurred while performing the recovery operation. Details (link)
Clicking the link presents me with another dialog box that shows various options for ensuring the drive is connected (which it is, Disk 5) and it asks that all USB drives are removed. However, if you remove the installation media, you can't continue anyway.
Here are my questions:
What on in the name of Microsoft is going on here -- has anyone run into this problem before? According to the instructions, this should be super easy. I've reviewed the following: http://technet.microsoft.com/en-us/library/jj593197.aspx
Should I disconnect the Storage Space drives all together, leaving the new system drive, the backup drive and the USB stick and try again?
Should I install a new copy of Windows Server (with storage drives unplugged) and then attempt to restore.
If the backup was corrupt, wouldn't I get a different error message?
What other options can I try?
I've already made a simple volume on the NEW drive as I read elsewhere that solved someone with a Windows 7 recovery that sounded the same. This did not work for me. I've tried to remove the USB drive, and then process complains and says it can't find the
path to the install media.
My server is headless and DVD-less, so USB is the only way I'm going to get this to install. I've also already tried moving my USB stick into just about every USB port available.
Finally, this is a Gigabyte UEFI motherboard.
Someone smarter than me please step up and show me the light! I can't believe the restore process is failing like this.A brief update since my last post. I've left all the drives plugged in and decided to replace the bootable USB stick method with the tried-and-true external USB DVD drive. Upon boot, I again attempted the recovery option outlined before. However, this time,
I receive the following message:
Windows cannot restore a system image to a computer that has a different firmware. The system image was created on a computer using BIOS and this computer is using EFI.
I don't believe this is true, but to test the error, I proceeded to configure my BIOS for legacy BIOS support and turned OFF all UEFI support. I again booted to the system and proceeded to attempt the recovery option outlined before. This time, it appeared
to start working, but then resulted in the same exact error message I reported previously just a short 30 seconds later. I attribute this problem to the slower speed of the USB DVD drive.
I reconfigured my system again for UEFI and installed a fresh copy of the WSE2012. This seemed to go without any trouble. Once in the new instance of WSE2012, I attempted to recover from the original backup. At this time, I can only attempt to replace folders
and files and not the entire drive. Needless to say, the process did not complete correctly and I have a half baked of new and my original drive, complete with Dashboard plugins that don't work. The next thing I'm going to try is to install fresh again and
from within WSE2012 attempt to restore from the image again. However, I doubtful that the result will be positive. Stay tuned, more to come. -
First of all I am using a MAC and do not have any third party security programs. So when the iphone fails to restore because of an error (1611 or 1603 or 1609) and I read through it all and it keeps coming back to a third party security program interferring, it get very frustrating. So I talk to the Rogers tech guy and after he walks me through the restore process that I have already mastered several times and he winds up telling me it's a software issue and that my phone thinks someone has tried to unlock it or jailbreak it. Well as I wouldn't have a clue as to where to start jailbreaking and the phone was working fine this morning...... Needless to say I am extremely frustrated and have been fiddling with this stupid thing for 4 hours now. So somebody please help. I'd rather not be out a $600 phone.
You need to restore the iPhone via recovery mode. To do this follow the link below to guide you:
http://support.apple.com/kb/HT1808
Because you need to restore to factory settings all data on the iPhone will be erased. Because the iPhone was never backed up most of the data you won't be able to get back. -
So I was using my iPod Touch 5th generation and the charger wouldnt charge it and it died then while it was in the process of tuening back on the apple logo dissapeered and it kept on turning on and off so i put it into DFU mode and it said to plug it into itunes to i did and it said i had to restore it to use it but when i tried to restore it it brought up ," Couldnt restore ipod, error code (9) " ..... and i have tried 3 different USB cables and two different computers and USB ports and i have no clue what to do so i would like help from anyone please that would be awesome!!!!
Thank you,
ZacZac henderson wrote:
...Couldnt restore ipod, error code (9) " ...
Try here > Configure security software
Maybe you are looking for
-
Need help with duplicate print jobs over network that I can't cancel
I have the Photosmart Premium All-in-One on my home network. My kids who each have laptop running Windows 7 and are connected via wireless to the printer via a DLINK DIR-655. They hit the print button too many times and it keeps printing over and ov
-
after lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?
-
Work with Oracle Data Connection
Hello, I'm Eugene Buzin. I begin to use the last version of ODT for VS.NET 2005. I havn't used it before. As I conect to shema via data connection node then I can see and work with objects that are in this schema only. I have grants to select and upd
-
How to watch videos in Creative Cloud File Manager (website)
I recently uploaded a .mov to my Creative Cloud. Is there a way that I can watch this video on the site without downloading it? Do I need to encode the video a certain way. If this is not a feature, it really should be.
-
Failed installation of downloaded PSE 12