5800 screen problem....

hey frnds i had fitted magnet to stop lines on screen of 5800 ,but some times when i unlock the screen the screen shows black and white light is flashing and it take 2-3 min to recover plz help what to do..?

@adrianhughes
actually there are rumors that if you will fitted a magnet on the screen of the NOkia 5800.. the screen issue will be fixed.. but yea you're right.. sending the phone to carepoint would be the best solution for this one..
Smile lang lagi.

Similar Messages

Nokia 5800 Screen Problems After Firmware Update V...

Hi all,
I have the Nokia 5800 navigation edition. I just updated the firmwareon it from V40. to the latest available 51.2.007. Doing so has turned the phone's screen into a huge mess - the lower half of the screen is all white and the upper half has some weired flickering and the icons(the ones that are visible) are all messed up too and some of them are not responding at all.
Heres what I've done to resolve the problem:
- remove the battery, memory and sim cards for a few hours.
- reboot the phone without the memory card(eliminating any corrupt setup files).
- reinstalled the V51.2.007 update several times using bothe the Ovi Suite and the older Nokia PC Suite updater.
- tried running the updates on all XP, Vista and Windows 7.
Can you please advise me of any other possible solutions I can try. Is there any way to revert back to the older firmware. The phone was working just fine before the update.
Thank you all for your help.

There is another way to hard reset your phone and it is as follows.
With your phone powered off, press and hold Green + Red + Camera Keys. Then power on phone using the on/off button whilst keeping the three keys depressed until you see the Nokia Shaking Hands Logo.
Always remember to backup your phone before performing resets as your data may be lost.
This reset will revert the phone to its out of the box state, so it will revert back to the original version of Maps that came with the phone. However, this should be an issue as you can easily redownload and reinstall the latest again.

Nokia 5800 screen problems when unlocking

When I unlock my phone, I get horizontal and/or vertical lines - I can't use the phone during this time, because the display is so badly affected!
After about 5-10 seconds, the home screen will show perfectly normal. When I either lock the phone, or lock it manually, then unlock it a few minutes later the lines come back again!
Is this a hardware or software fault? If it is a software fault, how can I resolve this annoying problem?
5800 v20.0.012 -- 6500s v9.40 -- 6233 v5.43 -- 5140 v3.13

I have exactly the same fault on my 5800 to the point where the phone is completely unusable.
Used the "Contact Us" facility 5 days ago - still waiting for a reply/acknowledgment.
I bought the phone in mid February so it was quite an early release model, V11 frimware, but the screen fault was there early on but only very occassionally. Had the phone updated to V20 but the problem was still there. However it got progressively worse until the phone became unusable. The screen can only be restored by powering off and on again but once the screen has gone into saver mode it cannot be restored via the unlock button, or any other means other than a power down.
Sent the phone to the Nokia "Anovo" repair centre only to have it returned 10days later with exactly the same fault as I sent it in with. The return advice note stated that details of the repair would be found on the enclosed letter - there was no enclosed letter. The return form states that all phones sent in would be automatically updated to the latest firmware - mine wasn't, even though Nokia notified me 2 weeks previously to inform me that there was an update for my phone.
Rang Nokia Care last week, (Thursday) to be told that someone would contact me by phone, (borrowed phone obviously, as I had stated my 5800 was unusable). Friday and I had not been contacted. Rang again Friday morning 10.30am only to be told someone would contact me. Left a contact phone number again. Friday afternoon - still no contact so rang again. This time I was informed that someone should have told me that I wouldn't be contacted until Monday as thet were all "Very Busy" - I wonder why. Today, Monday afternoon stil no one has been in contact so I suppose I am going to have to go through the whole routine again.
I am very close to the point where I am going to give up and demand a refund for an item that is clearly "Not of Merchantable Quality" or "Fit for Purpose" which would be a shame as when it worked I was really pleased with it. I bought the phone outright so I have no contract redress so am completely in the hands of Nokia. I know that Nokia is a very large company and I am but a single customer but from all the forums I have lookes at since this saga started I am driven to believe that the 5800 is causing Nokia some serious problems.
If I do finally get some acknowledge from Nokia I will inform this forum.

5800 Screen Problem - Nokia Response

Have detailed the problems I am having elsewhere. Have also seen many other threads started about the same problem and the WWW provides much other evidence that there is an issue with the screen malfunctioning on 5800.
I have yet to see a response from Nokia or even any comment or advice from Nokia on these forums.
Sure there is plenty of advice telling me to take it to a Nokia Care Centre which I will have to do.
Has anyone that has taken a phone to a care centre had any success ? Has it been fixed, or replaced and what reason was given ?
But what about the underlying problem. With so many phones going wrong there is clearly a serious problem with quite a lot of handsets.
Can anyone from Nokia comment on this problem on this thread. It must be a known problem.

Well I agree with you about the issue with the cold there but you make it sound as though it is normal for this to happen. I have never had this happen to any other Nokia LCD device before or any other similar device that I have owned. There is definitely some strange issue, as when the screen goes fuzzy, if you lock the phone and then place it on or near a heat source for a few moments, when you unlock it the screen is mysteriously working again. This is a very frustrating issue which is exacerbated by the fact that the device is of the touchscreen variety which effectively renders it useless as if you can't see the screen then you can't see the buttons to control the infernal machine! Unless that is you are able to memorise the menus positions and also that of their sub-menus and options!!! I don't think so!!
Anyway, one thing I will say is that the service from Nokia is absolutely amzing when it comes to repairing them. I used the online form at http://www.nokia.co.uk/support/repair/repair/warranty?c=1 and they sent a UPS guy who arrived to collect the device the ver next day!!! That was last Monday, the 29th March, and I received back a brand new Nokia 5800 today!!! Obviously rather than repair the device they have just replaced it with the revised model that they are obviously producing now that they have realised and rectified their errors. I am very impressed with getting a new device and so quickly too! Only thing is, they don't send you a new back for the phone, as they tell you to keep yours at home and not send it to them, so if your back is worn it will look out of place with the brand new phone if thats the route that they take with your case, which I think they will, or rather should. That is because I have heard that people that were getting their original device repaired and returned to them the problem was recurring soon after it being returned to the user.
Props to Nokia though on replacing my 5800! I must say that at first when I sent it I thought I was going to be waiting for ages, but as I said I only waited a week and they even have a widget on their repair part of the site that tells you the status of your repair and where they are with it, all you have to do it type in your case number.
Hope that is of some use to you.

Nokia 5800 Screen problems may occur!

The weather cooling, it may lead to problems with cell phone screen!

Mine does not want to start after I restore original factory settings I can do anything the only thing I see is the light on three buttons. Please Nokia help us on this phone. You had my trust for the past 15 yrs as a loyal customer please do something.

Nokia Xpress Music 5800 screen problem!!!

Hello,
i am having major problems with the screen of my Nokia! Everything was fine until recently when the image on screen started constantly getting distorted (i.e. i can't see anything but blocks of colour!) I then have to either turn my phone off or keep locking and unlocking the phone until the image returns to normal. Oddly enough, i was playing with my phone at the bustop yesterday when someone noticed what was happening and said that he had the same problem with that phone and that the way to fix it was to delete any screensavers i had but the thing is, i don't have a screen saver! The only thing i can think of is that i did download some themes recently but they worked without a problem for about a month so i don't see why they would cause problems now! Does anyone have any suggestions?
Thanks in advance

Try Display Calibration..
Menu-->Settings-->Phone-->Touch Input-->Touch Screen Calibration..
..else, the problem may be because of the Screen Protector film (if fixed..)..or with a particular Theme..Change the theme and check..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Nokia Express music 5800 screen problems

Every time i receive a called the screen gets wild and i cant see who is calling me, also happen when the alarm sounds gets crazy and i cant shut off. This start happend when i made an actuallization of the software.
Please i need help, can somebody help me?

did you update the firmware ?
try resetting the device by typing in *#7370# security code is 12345
back up your data such as videos photos apps contacts etc
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia 5800 [ Screen and phone problems]

I got a problem with my nokia 5800 screen,
sometimes when my brightness is bellow 80% 2-3 flikering lines apear wherever i am ( home screen, watching a video, browser,call someone etc.)
when brightness is at 80% its normal always( maybe of the high brightness i may not see the lines)
however this is annoying and i want to know if i can do anything about it !
on top of that my phones shuts down suddenly on its own randomly!
the phone is functioning well running app without any problem and watching videos !
skype

The 5800 is getting on in years now so it's definitely a hardware issue your facing. Your best bet is to visit a Nokia Care Point and see if it's worth the cost of repair otherwise you'd be better off getting a new phone.
Ray.

5800 touch screen problem

I have this phone from six months.
It is having touch screen problems since a few days.
like for eg. When I tap the message icon it opens gallery,The touch seems to be on right side wherever I tap or touch.The phone then when it gets restarted works fine.
Touch screen calibration does not seem to work and I have the latest firmware update too.
Please help.
Thanks

Had my 5800 for a few months now, and had no issues until 2 days ago. Suddenly, the touch screen stopped responding properly and was selecting the wrong icons. It was impossible to write a text message! The weird thing was that it wasn't selecting the next character/ icon to the left, it was completely random!! Tried turning off and on and removing battery, but that didn't work! Calibrating the screen also didn't work.
About 3 hours later I felt it vibrate in my pocket, so took it out and couldn't figure out why (no call/ text/ keypad still locked etc) but the touch screen was back to normal as if nothing was ever wrong!
So, happy it was just a minor 'blip', I carried on using the phone (with no problems) until tonight... Exactly the same has happened! Guess it'll be going back to Nokia for repair tomorrow!

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

Trying to update OS to fix White Screen problem.

Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

Screen problem making iPad unusable

My iPad2 is 15 month old and has developed a strange screen problem. It seems to have developed a mind of its own, typing ahead with random characters, doing its own thing when scrolling and trying to select in apps. Two days ago Apple support said restore to factory settings which I did. Same problem came back. Yesterday Apple support said the same thing which again I did. Same problem came back Today Apple support say it's a hardware issue out of warranty. We had a polite discussion about EU legislation but to cut a long story short, they basically said "sorry about that, but there is nothing our policies will let us do, you're on your own"
Not exactly the response I hoped for. So I've now got an iPad that is basically useless, unless I want to use it as a door stopper.
My business made a strategic commitmnt to Apple in Mid 2011 and this iPad was part of our shift away from PC/Windows. It's the first time I have needed to deal with Apple Support, and while each of the people I have spoken to have been professional, understanding and helpful, they have been unable / not allowed to assist any further.
Yes, we could have taken out Apple Care Agreements. We chose not to on the basis of 2 year statutory warranty and Apple's reputatiuon for reliability. Seems I made a big mistake here and am left wondering if we made the right decision in going down the Apple route. Our investment in Apple hardware and software is massive for an SME and our workflow depends on iPads.
I'm left with a problem. Thanks Apple.
I'm still a fan but my blinkers have been removed. No longer will you be giveen the benefit of the doubt when you screw up - Maps, WiFi etc - as you have had a direct and negative impact on my business and missed a chance to keep a very happy customer on board.
Does it help to post this? Not really, but it's off my chest.

And you are within your "rights" to post this. But you do realize that we are not Apple employees - correct? We are just other users like yourself. If you feel that you have been treated unjustly, move up the Apple chain of command. Politely demand to speak to the next higher up and go from there.

Screen problems with photoshop elements 10

I installed Photoshop Elements 10 and Premiere Elements.
Premiere Elements works allright, but Photoshop E 10 gives screen problems.
De menu's on the top roll out, but there is no text in them.
The screen in Organiser is distorted.
I reinstalled P E 10 but the same problem accurs.
I dit a computer reset to an earlier date and installed Ph.E. 10 again but the same problem. No text in the topmenus and a distorted screen in Organiser.
Letters become 6x larger than normal.
All my other programms work fine. I never had screenproblems.
I use Elements 8 now again and that works fine.
I use: Windows 7
Card: NVIDEA GeForce GT 220 resolution 1680x1050
Do I have to remove Elements 8 before installing Ellements 10? Is that perhaps the problem?

Ken, The problem is: The buttons don't work. So I cannot use Edit...
But:
I reïnstalled Adobe Elements 10 for the 4th time
Cleaned my register again.
restarted my computer
Did a computer reset to an earlier date
Installed Elements 10 again but .......not the try version of Premiere Elements.
Now Elements 10 has a normal screen.
This was a try and error sollution. I hope it will last.
Jan

Can anyone identify screen problem that freezes (pic)

Can anyone identify my screen problem that freezes? Alternately I get this image all over screen (see pic) or just a few horizontal dotted lines.
I have to force reboot.
Any thoughts appreciated.
iMac27, 3.5Ghz i7, 32 Gb ram, 3T drive.
Mavericks 10.9.5
I use the Adobe CC suite the most.
Thank you.
ETRE report prior to this image
Problem description:
iMac keeps freezing and returning to login
EtreCheck version: 2.0.11 (98)
Report generated 4 November 2014 2:45:09 pm AEDT
Hardware Information: ℹ️
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.5 GHz Intel Core i7 CPU: 4-core
32 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
BANK 0/DIMM1
8 GB DDR3 1600 MHz ok
BANK 1/DIMM1
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GTX 780M - VRAM: 4096 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:15:11
Disk Information: ℹ️
APPLE SSD SD0128F disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Boot OS X (disk0s3) <not mounted> : 134 MB
Macintosh HD imac27 (disk5) / [Startup]: 3.11 TB (2.84 TB free)
Core Storage: disk0s2 120.99 GB Online
Core Storage: disk3s2 3.00 TB Online
SAMSUNG HN-M101MBB disk1 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
disk1s2 (disk1s2) <not mounted> : 999.86 GB
Boot OSX (disk1s3) <not mounted> : 134 MB
SAMSUNG HN-M101MBB disk2 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 999.86 GB
Boot OSX (disk2s3) <not mounted> : 134 MB
APPLE HDD ST3000DM001 disk3 : (3 TB)
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Recovery HD (disk3s3) <not mounted> [Recovery]: 650 MB
Macintosh HD imac27 (disk5) / [Startup]: 3.11 TB (2.84 TB free)
Core Storage: disk0s2 120.99 GB Online
Core Storage: disk3s2 3.00 TB Online
USB Information: ℹ️
VIA Labs, Inc.          USB3.0 Hub
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Wacom Co.,Ltd. Intuos PTS
VIA Labs, Inc.          USB2.0 Hub
Fitbit Inc. Fitbit Base Station
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
LaCie Little Big Disk
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.wacom.kext.wacomtablet (6.3.9 - SDK 10.9) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.wacom.wacomtablet.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.koingosw.MacCleanse4Helper.Reminder.plist Support
[loaded] com.koingosw.MacCleanse4Helper.TrashWatcher.plist Support
User Login Items: ℹ️
Creative Cloud Application (/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
EPPEX Plugin: Version: 4.1.0.0 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
QuickTime Plugin: Version: 7.7.3
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
Safari Extensions: ℹ️
Dashlane
Pin It Button
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
WacomTablet Support
Backup size 2.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      7% Safari
      5% WindowServer
      4% WacomTabletDriver
      1% WacomTouchDriver
      0% powerd
Top Processes by Memory: ℹ️
241 MB WindowServer
213 MB com.apple.WebKit.WebContent
206 MB com.apple.IconServicesAgent
206 MB Safari
172 MB mds_stores
Virtual Memory Information: ℹ️
27.84 GB Free RAM
4.04 GB Active RAM
708 MB Inactive RAM
1.76 GB Wired RAM
518 MB Page-ins
0 B Page-outs

I ended up calling Apple Support twice. After first time when we checked drives etc, the second time they said we had done everything and it must be a hardware issue. It had to have a logic board replaced.

Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

Apple service centre employee told me that they do not have this 14 day offer in India.
And My mac book pro is taken in by Service centre people to run test etc and I will be informed the next day if they accept it as a fault or not ?
I feeling ridiculously bad.

5800 screen problem....

Similar Messages

Maybe you are looking for