5800 Search Problem

When in my Home Screen (short cuts):
When I try to use the Search Utility to find an item on my phone, the search briefly opens but does not allow me to type anything in the entry field, and then quickly closes back to the Home Screen? This happened out of the clear blue. How can I fix?

i have the same problem and did it. my SIM card was reformatted too.
i am now overseas and nv bring my laptop along
so i guess have to wait till i go back then I can transfer the back up back to my SIM card....
P'S : after reading back, then i realise i nv read properly. but anyhow, i have to reboot my hp. if not, i not only can't search, i also can't use my message function. and I be outstation for another 6 days and I can't just simply receive SMS and don't read them....
Message Edited by dalkisying on 07-Apr-2009 02:50 PM

Similar Messages

5800 Wifi Problems

I know this has been mentioned a few times - but reading them does not help me:
I have a wifi network set up at home on a Netgear Router. I have a few things connected to it via wifi and not had any problems.
My network is set up with a hidden SSID, mac address filtering and defined IP addresses for all the mac addresses so when each device is attached it always gets the same IP address.
I have entered the mac address of my 5800 no problems there: However, when I try and connect the 5800 to the internet through my wifi I get nothing.
I have tried using the wireless wizard which says the connection is made, my password is correct - but I just cannot connect to the internet through my wifi?
Any suggestions? My phone has the latest firmware - just cannot get a wifi connection at home

If the MAC Address is showing in the list of connected devices, then I suspect that it is not a problem with the MAC filtering.
With regards to DHCP, this is the system that allocates an IP address (and other information) to devices connecting to your network. Check on your wireless router settings, there should be something that says DHCP is enabled or not. If DHCP is not enabled, then your device will not be able to acess anything on the network without manually entering the IP information.
If DHCP is not enabled, try to enable it and see what happens then.
Dave -
Phones:3110,5110,6110,6210,6310,6310i,8210,8250,8310,6230,6230i,6280,E60,E65, 5800, N900
and: 7110,6250,6220,6111,7370 (but just for a few months)

Outlook 2010, Exchange 2010 - Searching Problems

Anyone out there able to help with some searching problems some of our users have been seeing?
Searching in OWA works fine but some people have problems when searching for older emails in Outlook. We've rebuilt Outlook profiles, rebuilt the windows index's (which seems to work but only temporarily). If there's a way to schedule the Windows index to
rebuild every night or once week, I'd be very happy to test that out but haven't been able to figure out how to do that.
Anyone have any other ideas?

Hi,
It seems something keeps corrupting the index... Run Anti-virus program and Malicious Software Removal Tool to scan your system, check if there's any virus or malware that may cause the index issue.
If this issue persists, please also go to File tab ->
Options -> Search -> Indexing Options
-> Advanced -> Click Troubleshoot search and indexing, to do some troubleshooting steps to find the possible cause.
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

Nokia 5800 contacts search problem after phone swi...

Recently bought a new 5800. Used Phone Switch to retrieve contacts from older Nokia, seemed to work ok.
The problem is that ALL NEW contacts added to 5800 memory appear BELOW the contacts list (not sorted) AND cannot be found via contact search. This is very annoying. How can this be fixed?
Thanks.

It sometimes does this.
Unlock the phone, go into the messaging and come back out again.
The "new message" notification should stop now.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

5800 Contacts problem

Whenever i create a new msg and select one particular contact and when i search for another contact which "exists" in my list.. It doesn't appear at all !!!!.. Is this prob might be cos of sim-card? I had this prob quite recently and not on the day of purchase. Its not even a month since i bought it.
This problem was not there until i copied things from PC to 5800 Xm. This problem was also experienced in my previous N96. It still remains in both my phones. This prob was not resolved despite of all possible "Reset" and flashing of mem in my N96. Have not tried on this one but..
Is there any possibility that a "PC" virus can attack my phone and stay fixed despite all reset and etc?? Suggest an Idea. The Nokia service center said its a software defect in my N96 and they could not "Mend" it. The admin were exclaimed and told this might be cos of the SIM!!.
Diagnose it guys, i need an answer!

Where are the contacts stored ? On SIM or in Phone Memory....In Contacts-->Options-->Settings-->Contacts to display and Default Saving Memory, you can select Phone Memory.. Store all in Phone Memory and try. As far as the virus goes there are no known viruses for Symbian..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Nokia 5800 GPS Problem

Hello,
i have an Nokia 5800, and i can´t use the gps with a satellite signal, only with the GPRS.
someone can helpme.
thanks a lot!!!!!!!!!!!!

Hi i was facing similar problem here in bangalore(India)
All you Need to Do is to stay in some open area(Outside your house or anywhere)
1.Open Maps
2.click on My location
and Keep the device searching for satellites (there are 6 of them) .
it would take at max 45 minutes
3.Be patient for 45minutes
4.Dont forget to load MAps for your country
5.Nokia GPS works without any need of Wifi or Telecom operator for
Nokia Maps
6.If you have google maps installed ,
GPS will work too ,but it will ask for WIfi connection or network operator to download maps
7.Nokia location application is awesome
you can see you speed,navigate and do lots of things
but google Maps is no less
[just it needs some connection to download maps from internet ]

5800 Hearing Problems

Hi,
I have recently bought Nokia 5800 and now experiencing a wired problem. Whenever I speak over this phone, the voice gets blocked and I can not hear anything for sometime. While holding the phone close to the ear by pressing it so hard, it starts working. Whenever I move the phone near the ear, the sound again breaks. Any suggestion??
DXB

This was discussed 100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 times in another thread. If you had used the search feature, you would have found it. Many to most problems here have been mentioned. By using the search, you will be part of an already in progress thread and assure that others will see your problem and answer it.
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Problem with Flash Lite in Nokia 5800 XpressMusic-Problema con Flash Lite en Nokia 5800 XpressMusic

I've got a problem playing videos in YouTube with my 5800. Recently I updated my version of Flash Lite to 3.1, from that day I can't see correctly videos on YouTube, when the the indicator of the bar reaches 1/4 of the totallity of the bar, the sound and image stop, but the indicator continues playing. If i want to see completly a video I have to put the indicator in the start of the bar and wait the load again. Some idea to fix this problem?
Sorry for my English level.
Tengo un problema reproduciendo vídeos en YouTube con mi 5800. Hace poco actualicé la versión del Flash Lite a la 3.1 y desde entonces no puedo ver correctamente vídeos de YouTube, cuando el indicador de la barra alcanza 1/4 de la distancia total, se detienen el sonido y la imagen, pero el indicador continúa como si siguiera reproduciendo, es decir para el vídeo es como si siguiera reproduciendo pero ni el sonido ni la imagen continúan., para ver los vídeos tengo que llevar el cursor de carga al principio y esperar la carga de nuevo, es un problema realmente molesto. ¿Alguna idea para solucionarlo?

Hi,
I have Nokia 5800XM as well. The YouTube videos are playng fine for me. my FW is 40.0.005 with FL3.1
Maybe you need to update your device's firmware and FL version.\
Start Device Manager application on your 5800XM from menu or dialing *#0000#. It will check for new updates and ask you to download them. Remember that these updates are in MBs. I'd recommend update using a WiFi connection or flat-rate data plan.
Best,
// chall3ng3r //

List View Web Part Search problem

We have a problem with the search in the
List View Web Part (SearchBox).
If you enter anything in SearchBox
and the beginning of the search, nothing happens.
This problem only occurs in non-admins.
In this case, the browser generates an error:
"inplview" not defined.

I have the same problem. I think the problem is related to the Publish feature.
Any ideas?

Google search problem in safari

I went to do a google search and used the window in Safari. When I hit go, I get results but they look strange. Only the search term and then most of it is blank. It's as if the page is so big that I can't see the rest. When I go to the bottom of the page it says Mobile, but nothing else. When I tap beside it, it went to a "classic" view as if on the desktop of your computer, but then I could not see what I was typing in the search box. It was invisible. No problem with Bing or Yahoo.
I also have noticed on a page that I normally check that the login button was not there. I could click where the login button usually is and then it will take me to the page, but what I type is also invisible.
I have an iPhone 4s 5.1.1. No problems on my husbands iPhone 4s.
Will try to restore.
Has this happened to anyone?

Restore has fixed it.

How to fix the search problem due to timezone?

I live in GMT+8 timzone. I just migrated a site from SP2010 to SP2013. After migrated when I search for a managed property (datetime) all results return is 1 day later.
To troubleshoot the problem, I setup a new managed property using "Text" datatype. In refinement panel for that managed property I found the refinement are all looks like 2013/12/11 16:00:00. (which should be 2013/12/12 00:00:00)
The old server is running in GMT+8. The only different is SP2010 and SP2013.I have changed the web application -> general settings -> timezone to GMT+8 and the site collection settings as well. We did not enable "My site" so there
is no personal regional settings. What else I can check? What should I check and how can I make the search work as expected?

Once a document is stored and uploaded it has the UTC time stamp on it. Now this timestamp cannot be changed.
So you either use timezone when the document was uploaded or use it the same way.
BTW what difference does it make with the time it shows?
The field in question is designed to store a "Date" value only not the "Time". The time is always 00:00:00.
In the old farm, users search for 2013/12/31 will get the results with field value 2013/12/31. Now in the new farm, with the timezone problem, search for 2013/12/31 will get the results with field value 2014/1/1

Search problem with ActiveDirectory - please help

Hi,
I've tried to get a list of the users out of the Active Directory.
But I just can't get my code to work. It returns nothing back.
The problem should be simple. But I can not figure out why.
Please help!
Raymond
import javax.naming.*;
import javax.naming.event.*;
import javax.naming.directory.*;
import javax.naming.ldap.*;
import java.util.Hashtable;
import java.util.Vector;
import java.util.Enumeration;
public class AdClient {
public AdClient() {
getUsers();
public static void main(String args[]) {
Client client = new Client();
private void getUsers() {
// domain = utest
String INITCTX = "com.sun.jndi.ldap.LdapCtxFactory";
String HOST = "ldap://192.168.128.50:389";
String SEARCHBASE = "ou=Users,dc=utest,dc=com";
String FILTER = "cn=*";
try {
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
env.put(Context.PROVIDER_URL, HOST);
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
env.put(Context.SECURITY_CREDENTIALS,"admin");
DirContext ctx = new InitialDirContext(env);
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
NamingEnumeration results;
// now search for the users
results = ctx.search(SEARCHBASE, FILTER, constraints);
while (results.hasMoreElements()) {
SearchResult sr = (SearchResult)results.nextElement();
System.out.println(sr.getName());
ctx.close();
} catch(Exception e) {
e.printStackTrace();
}

I tried your code...
There were two issues I saw, when I changed them it worked!
1) public static void main(String args[]) {
Client client = new Client();
should be
public static void main(String args[]) {
AdClient client = new AdClient();
2) String SEARCHBASE = "ou=Users,dc=utest,dc=com";
env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
Should be
String SEARCHBASE = "ou=Users,dc=utest,dc=newcom,dc=com";
env.put(Context.SECURITY_PRINCIPAL, "[email protected]");

RoboHelp HTML 8 Search problem

I have a single (non-merged) RoboHelp 8 HTML project in which I cannot seem to get Search working correctly.
I expected to see a box into which I can type a search term and a blank pane below the Contents/Index/Search/Glossary bar where search results would appear. Instead, I get the following when I generate WebHelp:
This problem appears in IE 6, IE 7, Firefox 3.0, and Firefox 3.5, all of which our customer base uses. I'm using RoboHelp 8 on a Windows PC with XP Pro 2002, SP3.
In the Project Settings/General dialog, I have the default settings for the Stop List and the Always Ignore List selected. For "Add new keywords to" I have "Index File (HHK)" selected, and "Binary Index" is selected.
When generating WebHelp, I have the following set:
General selections: Under "Additional Options," "Apply to all Topics," "CSS" is selected, with the correct CSS name displayed. "Add Mark of the Web" is selected.
Navigation selections: For Toolbar Buttons, Contents, Index, Search, Glossary are selected. For Search Options, "Enable Highlight Search Results" is selected.
Navigation Pane Preferred Format selection is Pure HTML. (We tried DHTML/HTML but that resulted in an empty nav pane and a nonfunctional index.)
Optimize Speed For: Web Site (Internet)
Publish: Republish All.
What are we doing wrong? I'm totally stumped and I can't seem to find any help on this issue anywhere. Thanks!

Hi there
Please do expound.
MSMoore9412 wrote:
I finally succeeded in getting a Search pane that looked right and performed correctly by deselecting the Mark of the Web option.
To my knowledge this option only affects the output when you view things locally, as in when you are testing the output immediately after generating. Are you saying here that it somehow affected things after you uploaded the files to the server?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Numbers search problem

I have Numbers 08, OX, the search works some of the time but will suddenly quit. The other day I was searching books by a certain author, to compare to a list of her books, trying to figure out which ones I had not read. (yes, I keep a log of the books I have read). For instance, I had searched & found a book, then searched for another, no find. Yet, when I looked at the one before, I see the one I searched for a few lines below. I tried other searches that should have landed on books but nothing happened. I quit Numbers & then checked it again, nada. It is working today...did it just need a reboot of Mac? I really can't imagine software that requires that. Oh yes, there were about 30 books that I searched.
Thanks for your help in solving my problem in Numbers.

I have Numbers 08, OX, the search works some of the time but will suddenly quit. The other day I was searching books by a certain author, to compare to a list of her books, trying to figure out which ones I had not read. (yes, I keep a log of the books I have read). For instance, I had searched & found a book, then searched for another, no find. Yet, when I looked at the one before, I see the one I searched for a few lines below. I tried other searches that should have landed on books but nothing happened. I quit Numbers & then checked it again, nada. It is working today...did it just need a reboot of Mac? I really can't imagine software that requires that. Oh yes, there were about 30 books that I searched.
Thanks for your help in solving my problem in Numbers.

Location search problem with iPhone map

I am posting this to see if anybody else have the same problem, and hopeful a solution as well.
The problem is that iPhone map started from a 3ird party software does not use my current location by default. For example, I did a search for pizza in google search. The google app will give me a list of local pizza places in their page. But if I click on show all results, it brings up the map app and displays a few pizza places around the world. But shouldn't it give me results in my local area instead? At first, I thought this is a google problem. But I see the same problem later with another voice search app. Have anyone experience this with their iPhone?
Thanks in advance to any insight on this.

I've already done it.
Do you think this will help?
I doubt that Apple will listen to us. Users with a problem that occurs quite a lot.

5800 Search Problem

Similar Messages

Maybe you are looking for