5800 software not updated properly

Hi all,
I have a question on 5800 software update.Will software update through NSU formats all the data including messages, contacts and applications.Yesterday i updated my device software but, all the contacts messages and applications are remain in the phone.And when i open search web and my content it saying system error.Again i updated device software still i there is no change in both the cases.Can any one help me on this.?

Hi Everyone,
I just update my Nokia 5800 firmware ver 10.0.010 to ver 20.0.012, I noticed that some extra applications got change, also I now can use my second camera, but one thing still a same problem is switch on/off, sometimes is blank, I have to switch it on/off many times to get my phone ready to use.
Is anyone has a same problem and already found the way to fix it up?
Thanks.

Similar Messages

  • Software not updating properly

    Started latest software/firmware update  4 hours ago - still updating with grey screen and turning wheel - I dont think it should be taking this long...have put a call into apple care but wont get response from them til tommorrow...any thoughts?

    Hi,
    Is the computer that you install member of a collection that has the software updates targeted to it? For unknown computers you must make sure that the Unknown computer object is targeted as well.
    Could that be the issue?
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.

    Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.
    i might need walked through on a few things if they are too complicated.

    Have you:
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    If a PC
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Shockwave will not update properly

    Hi. I have a laptop running Windows 7 Home premium, 64 bit system.I  use IE and just installed Firefox, as well. I tried to update Shockwave so I could continue to play my UClick jigsaw puzzle game, and my computer says it installed successfully, but it will not work with my jigsaw puzzle. I have uninstalled it and tried to reinstall it, but no change in response. When I try to open jigsaw puzzle, the Adobe Shockwave loading graphic appears, but nothing happens.
    Help!

    I understand the two sites are using different plugins/players.  I'm not an idiot.  However as Shockwave for Director is so old it's listed by Firefox as an unknown plugin and described as being a Netscape plugin ("Adobe Shockwave for Director Netscape plug-in, version 12.1.5.155"), I am merely suggesting that UClick might change to a more recent, robust plugin.
         From: SeanWilson <[email protected]>
    To: RB Jones <[email protected]>
    Sent: Sunday, March 8, 2015 2:34 PM
    Subject:  Shockwave will not update properly
    Shockwave will not update properly
    created by SeanWilson in Adobe Shockwave Player - View the full discussionThose two sites use 2 completely different plugins/players to view their content — one being Shockwave for Director, the other being Flash so "just changing the call" won't work. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7265858#7265858 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7265858#7265858 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Shockwave Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • HT1923 Trouble with newest version of iTunes not updating properly

    I tried updating to the newest version of iTunes because I received the Apple Software Update for it.  It wouldn't install properly, so I manually installed the newest version.  When I tried to open iTunes I received an error message: "APSDaemon.exe - System Error; MSVCR80.dll not found, try reinstalling the software".  So I clicked okay and received an error message the iTunes was not installed properly, try reinstalling.  Then I uninstalled iTunes and reinstalled it, but received the same error messages about 2/3 of the way through reinstalling.  Now iTunes won't install at all.  I went to the support page and got the instructions for removing and reinstalling iTunes on Windows 7, but I can't finish the removing steps because Apple Mobile Device Support will not uninstall at all.  My husband is having the same issue on his computer.  Is this a known issue with the new version of iTunes for windows?  How do we fix it now?  We really need iTunes on the computers to sync with our phones, iPod, and iPad.  Any help would be appreciated...should I contact apple support directly?

    Update - I was able to finally uninstall the Apple Mobile Device Support component and the rest of the components. I was not able to delete the common files/Apple folder when checking to make sure all the components were removed; however, I think that is because I have an Apple AirPort WiFi Device.  Anyway, the newest version of iTunes did install on my computer after following these instructions. So I believe my issue is resolved. We will see...

  • Array of clusters does not updates properly

    Hello...
    I builded a VI to split a series of 10000 values in many segments, each one overlapped by 50 %. The product of all the values of each segment is calculated and by means of visual inspection and Led selection (green means that the segment will be used, red means that the segment will not be used), I can select which segment will be used for the final sum. For example: if I have 20 segments, but only segments 4, 8, 15 are green, only the products of the segments 4, 8 and 15 will be summed to generate the final result. The final result should be refreshed if the Lenght of the Segment is changed or if any Led is switched to green or red, but the update does not occur properly. Sometimes all the segments are showed properly but if I change one Led or the Lenght of Segment control, the given result is wrong. When the Lenght of Segments control is changed, all the Leds need to be adjusted to green state.
    I don't know where is the problem in my code, but I think that is something related to the cluster constant that is wired to the first Unbundle by name, since that this constant was created from the cluster before it was inserted into array, and not from the array. If I create the constant from the array, the code returns an error.
    To avoid race conditions I used flat sequence.
    Thanks in advance for attention and help.
    Dan07
    Message Edited by dan07 on 07-26-2008 08:31 AM
    Attachments:
    Array of clusters.vi ‏43 KB

    I spotted one problemous area:
    Where you have an uninitialized shift register, so for every event the value of the last iteration is used.
    What's the meaning of this piece of code?
    I think you devide the length of the array by half the length of the segment?
    Ton
    Message Edited by TonP on 07-26-2008 05:34 PM
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!
    Attachments:
    Array of clusters_BD.png ‏2 KB
    Array of clusters_BD2.png ‏1 KB

  • Nokia 5800 will not update to 60.0.003

    My nokia 5800 xpress music is running on 52.0.007 but I want to update to 60.0.003.
    When I type in *#0000# on my phone , I will enter device updates. I entered options and check for a new update, it said it does not have a update. But on the device update main page, it said that the latest update is not updated.Can some mysterious guy help me???

    @bengan88
    If you would like to post the seven digit product code on label under battery starting with "0" can at least tell you whether or not v60.0.003 released for your device.
    Happy to have helped forum with a Support Ratio = 42.5

  • Purchase Order History not updated properly

    Hi All,
    The Purchase Order History is not updated correct.
    Scenario:
    The  Invoice is created ( MIRO) with Amount : 1001 USD but in PO History it displays 1000 USD.
    The Tolerance is 1 USD ...My Requirement is that it should display 1001 in PO History.
    Thanks and Regards
    Mahesh

    The Actual Bill Value is 1001 USD.

  • Smart playlists are not updating properly

    on itunes 12 i've noted that smart playlists are no longer updating with new podcasts properly. Only only podcasts are added to the smart playlist. Please fix this.

    With more testing, it turns out to be just Wow Hits 2012.   All my other iTunes-Store-purchased music is updating properly.
    http://itunes.apple.com/us/album/wow-hits-2012/id462986937

  • Regarding customer account not updated properly

    Hi gurus
    My customer account is not updated plz solve my issue.
    one material is sold to customer for rs 9/- insted of rs 10/- the difference amount is posted in sd side, all  taxes are updated in background processing. How we will update in customer.
    Plz suggest
    Edited by: Ravi Kanth on Jan 6, 2009 6:02 PM

    Hi there,
    According to == the FAQ ==
    "The recurring payment is taken three days in advance of your subscription expiring, to ensure prompt delivery of your subscription."
    Hth
    On ne regarde pas l'avenir dans un rétroviseur !
    IMac Intel Core i3 3.2 GHz - RAM 12 GB - OS 10.10.3
    Skype 7.8.391
    Logitech usb headset or Jabra 250 bt

  • Apple software not updating - Error message

    iMac locked up (white screen of death) so restarted.
    When it restarted it will no longer update apple applications through the App Store.  Downloads and then starts to instal and comes up with an error message.   (iTunes, iMovie so far) 
    Non Apple programs still seem to update and/or instal.
    Applications still run but not update to new versions.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
              /var/log ▹ install.log 
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    ☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ When posting a log extract, be selective. Don't post more than is requested.
    ☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
    ☞ Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

  • TS - software updates - not updating properly

    Hi
    When running a windows install via TS I really want the computer to be completely finished when it completes the TS.. but nooooo... when I log in to a client and check windows update.. there's ALWAYS around 100 updates waiting..
    My TS steps are as follows (the relevant ones)
    What am I missing? 
    I feel I've tried all kinds of different approaches but still nothing..
    ideas?
    Kindest regards, Martin

    Hi,
    Is the computer that you install member of a collection that has the software updates targeted to it? For unknown computers you must make sure that the Unknown computer object is targeted as well.
    Could that be the issue?
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Java SE 6 runtime not updating properly after Mavericks update

    Since updating my 27-inch Late 2009 iMac to Mavericks I have an update that will not process. I keep getting a Software Update notification that says, "To open "java" you need a Java SE 6 runtime. Would you like to install one now?" When I click "install", it begins the process and indicates that it gets about 40% into it and then responds that the network cannot be contacted at this time and that I should try again later. This has been going on for days now and pops up multiple times a day.

    Same problem for me. I called Apple and they told me this is an old version of Java and that I should go to the Java web site and download the most current which I belive they told me was version 7. I did that, it seems to install properly but it did noting for stoppig this annoying popup window from appearing on a regualr baiss throughout the day. Additionally, I'm haing some programs telling me they can not run wothout the proper Java update which I can't seem to figure out which one is the proper update. I may add to this on Monday after I call Apple again and see if I can't get someone who kows what is going on. I had no warnings of this nature before Mavricks.

  • Device Driver Software Not Installed Properly

    Hi
    I have Reinstalled Windows 7 ultimate 64 bit, after installing all hp drivers I lost WIFI
    and when checked Device Manager I found Under >Display Drivers >(1)standard VGA Graphics Adapter (ERROR)- when I right click mouse and check under general the message " This device cannot start (code 10)
    (2) standard VGA Graphics Adapter - working Properly
    and 
    >under other devices
    -Bluetooth Pehripheral Device (Error)
    -Network Controller (Error)
    both showing error
    Does these errors actually causing WIFI to not work? Please Guide me how to fix these errors
    When I go to HP Connection Manager 
    Under WIFI - Disabled by Mobility Centre is showing 
    I can not able to fix it.
    When I goto Windows Moblility centre It is showing not showing Wirless Connection Switchable Button
    I Tried for Updating Driver software scan for Hardware changes its not working its saying driver is upto date
    Kindly Resolve My WiFi Issue
    Thanks in Advance

    Hi 
    Originally My OS was windows home  Genuine but I recently changed to win7 64 bit Ultimate lost Recovery Manager (Formatted by mistake, did not got any copy from the seller while I was in UAE (Dubai);
    I Have installed all the drivers downloadaed from 
    http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/508...
    but  WIFI not working as I mentioned earlier mail....
    My Bluetooth {heripheral device id is
    BTHENUM\{00001132-0000-1000-8000-00805f9b34fb}_VID&00010046_PID&0802
    BTHENUM\{00001132-0000-1000-8000-00805f9b34fb}_LOCALMFG&000f
    and 
    Network Controller id is
    PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C&REV_01
    PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C
    PCI\VEN_14E4&DEV_4727&CC_028000
    PCI\VEN_14E4&DEV_4727&CC_0280
    FYI

  • 5800 Software not avaiable

    Hi.
    My mobile is 5800 and bought from O2 shop and dont have any contract.
    when i give my product code in nokia site it says  21.0.025 is avaibale,but when i try it from mobile it says updates not avaiable.when i try from NSU it says "Please note that ur carrier or provider MAY not have aproved latest device update.
    what should i be doing on this?
    this is really annoying and went thru many threads and cannot find a proper answer.
    could yoou please help me 

    ajay_desetty wrote:
    But its not locked to any network.its just bought from o2 shop.it dont even have its brand on it
    and i think most of the O2 customers has already got softwre upgraded.but why only me facing this problem? 
    The fact that it isn´t locked doesn´t mean that it isn´t branded! Everyone on your product code surely is running on the same software as you are...it isn´t only you that is "stuck" with this software for now.
    Have a look at this:
    http://linux.sgms-centre.com/nokiafaq/branded-phon​es/
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

Maybe you are looking for