5800 update screwed up the phone

Just updated the phobe last week and since then the phobe heats up really fast and the battery dies really quick. Also the phone stops working once it heats up. So I have to remove the battery and let it cool off before using it again ....
Why is this ???

You could try running the update again - now that you have the latest version of software, re-updating would simply reinstall the latest. It is possible that something went wrong in the original attempt and part of the software is corrupt as a result.
If trying again doesn't help the situation, take the phone to a Nokia service point to be properly repaired. If your phone is still under warranty, then problems caused by updating via NSU or Ovi Suite are covered under warranty.

Similar Messages

  • N9 PR1.1 update screwed up the phone, address book...

    Oh yeah now my facebook and web apps work perfectly BUT this almost completely destroyed my address book and phone apps. Well who would like to add address to address book anyway. Come on! Give me a sw that has the basic functionality working. Maybe I fall back to the older one...
    Solved!
    Go to Solution.

    Almost all the basic apps are now working very badly. Example camera app: I took a picture and it doesn't save the file to the device properly. The other is the address book as I said it let's me open a add new contact page, but when I try to save it the app crashes. The same with cancel saving. So I think I'm going to try to backup everything to my pc and then fall back to the older sw and then run factory settings and then the update and let's see what happens.
    I guess there are two possible reasons why this happened. If u can figure put something else please let me know...
    1) I don't know if it has to do with my problem but I run the update with the developer mode on.
    2) The other option is that I got the device from the Qt developer days and I run the update from Finland. But this affects only if the sw is somehow area dependent

  • I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

    I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story...............         iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT201210 I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.

    I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.  itunes says I have to restore my phone, but will lose all the data.  Is there anything else I can do? I really don't want to lose all my pictures and other data.

    It's in recovery mode. There is nothing left on the phone at all. If you didn't back it up before you started, your data is gone.
    you have no choice but to restore at this point.

  • While updating the software from 6.1.3 to 6.1.4 on iPhone 5, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in.

    While updating the iPhone 5 software from 6.1.3 to 6.1.4, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in. Using Windows 7 and phone not recognised by computer, let alone by iTunes.
    Any suggestions? Happy to take it off to the the Apple genius people but would prefer to get it running myself.
    Regards.

    Try this
    iOS: Device not recognized in iTunes for Windows

  • HT4972 i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?

    i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?

    Would this matter then? can you not update the 3g to the lastest software?

  • I have an iPhone 6. I am signed in to iTunes with my Apple ID. I am updating apps and the phone keeps asking for my wife's Apple ID.

    I have an iPhone 6. I am signed in to iTunes with my Apple ID. I am updating apps and the phone keeps asking for my wife's Apple ID.

    How can I find which Apple ID was used to purchase each app? I am trying to find the answer but not having any luck. thanks!

  • Hello there! I have updated iPhone 3GS software but once the update got completed the phone is not getting just restarting it again n again. Please help.

    Hello there! I have updated iPhone 3GS software but once the update got completed the phone is not getting just restarting it again n again. Please help.

    Hello Amarchand Sharma,
    Are you working with a Windows computer?  If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
    http://support.apple.com/en-us/TS3221
    Regards,
    Judy

  • WHY IS IT THAT THE OS UPDATE SCREWS UP THE Z10 MORE THAN RESOLVE ISSUES???????????

    WHY IS IT THAT THE OS UPDATE SCREWS UP THE Z10 MORE THAN RESOLVE ISSUES???????????

    Is there a question in there somewhere? reply with caps lock off please. :-)
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • TS1398 I am getting when manually entering wifi info of "Could not scan for wireless networks" wireless is working on other devices, how do I cure this?  The problem only began when I updated software on the phone.  Previously I had no problems with wifi.

    After updating software on Iphone (wifi worked fine before the software update) I  now can not get on wifi.  The phone with not find a working wifi network nor can I connect manually.  Wifi is working on other devices.  I have turned the phone on and off, turned the wifi router on and off and reset the iphone and down loaded updated software to the phone.  Nothing has worked.  Does anyone have an answer for this problem?

    Could this be the problem?
    iPhone 4 Modem Firmware : 3.0.04
    iPhone 4S Modem Firmware : 2.0.10
    Wifi is working on my iPhone 4, NOT on 4S -
    Why is my new 4S I got yesterday using a 2.0.10 firmware, isn't that old?! Isn't the newest 4.0+?
    I am so tired of trying to figure this out.
    The Wi-Fi addresses in the About settings are different on both phones too.

  • I synced my wife's iphone under my acct and it updated software on the phone but now because it synced under my acct she cannnot open certain programs on the phone

    synced my wife's iphone under my acct and it updated software on the phone but now because it synced under my acct she cannnot open certain programs on the phone

    I would test with another computer and another cable
    if it the device would not be detected by any computer I
    would say that it's connector was broken

  • Skype problem after update problem in the phone language

    Skype problem after update problem in the phone language
    after update to the Windows version the previous month after Skype version update I get this message that came in and tried in every way and the same message so I thought it's a problem in version bskaib and I wait for the update for acne is a problem particular
    to discovered that Skype wouldn't even be open on your browser-and I want to know if there is a way to make to download languages because the language of the United states are available for the device does not support language harbored her mean in the sense
    that I If you want the device English picked united kingdom and the United States version of does not support hardware keyboard language only!

    The Windows Store Development forums are for developers to discuss writing their own Windows Phone apps. For help with using Windows Phone please ask in the Windows Phone forums on
    http://answers.microsoft.com .
    --Rob

  • IPhone told me I needed to restore and update, also said the phone did not have an IMEI number. I tried to restore from iTunes but keep getting an error message.

    Ok I need help. I went to use my phone, put in my passcode, emergency dial came up, then the phone said I didn't have an imei #. I hit the back button and then I was told I needed to restore and update using iTunes. I tried several times to do this and my phone is still not working. It acts like it's updating, but once the bar reaches the other side of my phone, iTunes tells me there was an error. I used all the ports on my pc, changed cables, restarted my pc, and still nothing. Can anyone please help me. This phone is my life and I can't afford to get another one.

    Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
    Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand.

  • After failed attempt at updating my Iphone4, the phone now says its connected to Itunes but isn't.  Rebooting doesn't work either. Help!

    I tried updating my IPhone 4 this morning to 4.3.3.  It gave me an unknown error and now the phone won't disconnect from Itunes and rebooting it did not solve the problem.  I've researched and cannot find a solution.  I've tried plugging it back into Itunes and nothing happens.
    -Traci

    There is a MAJOR issue with iTunes activation at the moment.
    See: https://discussions.apple.com/message/15197891#15197891
    People with iPads, iPods and iPhones are unable to restore and update through iTunes..
    I have a feeling Apple Servers have been hacked or something.
    Call Apple Support and tell them the problem. They will most likely tell you there is something wrong with your phone but tell them to look at the Community Support Forums and to FIX the problem.
    @Simmo3D

  • Newest Firefox update screwed up the yahoo toolbar, AGAIN!

    Once again the update, which is SUPPOSEDLY an upgrade screwed up the yahoo toolbar so that ALL the app buttons have disappeared and can't be reloaded. This seems to happen every other time Mozilla updates Firefox. WHY is it so impossible to do an update that doesn't screw this up? This is a common constant issue with updates.

    I don"t know how or why this worked but I went to tools clicked on add-ons and went to Yahoo toolbar and hit options button. I added a skin to my toolbar and wow there it was my yahoo toolbar. Hope it works for others.

Maybe you are looking for

  • Questions on Slideshows in & from Lightroom 4

    As a Mac user that is relatively new to LR, I need a bit of guideance. I am accustomed to creating slideshows in iMovie. However, this is the first time that I have used LR to process my images for export to iMovie. Without going into detail, the RAW

  • Multiple alarms in ical after import

    is their a global way to remove a 2nd alarm that seems to have happened after importing from outlook. I have 2 alrms and i think this is making my ical file and entry numbers huge. Can you globally remove alarms and other ical event functions

  • How to send in xml tag a ESCAPE CONTROL ( chr27 )

    Hi, For a Check Printing custom (R12), I need to send to a matrix dot printer a xml file containing a "ESC J;" every 56 rows. The template that I'm using is an e-Text type. 1) Does anybody know how I can write this ESCAPE CONTROL in e-Text? 2) Does a

  • EJB QL in Session Beans?

    Hi, I am in need of a template like query. That is, I get some data which tells me "search all rows which fields are equal to those which I tell you to look for". So I dynamically create a SQL statement. To be more database independant I would like t

  • Interlinking d Webdynpro and J2ee engine perspectives

    hi, i am having different codes in d J2ee and Webdynpro perspectives which i want to interlink. Basically we r having the UI in webdynpro which we want to link with the codes in J2ee perspective. Kindly help.